fa9ebedec3 Reject invalid coin height and output index when loading assumeutxo (MarcoFalke)
Pull request description:
It should be impossible to have a coin at a height higher than the height of the snapshot block, so reject those early to avoid integer wraparounds and hash collisions later on.
Same for the outpoint index.
Both issues were found by fuzzing:
* The height issue by OSS-Fuzz: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34793
* The outpoint issue by my fuzz server: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34793#c2
ACKs for top commit:
practicalswift:
cr ACK fa9ebedec3: patch looks correct
jamesob:
crACK fa9ebedec3
theStack:
Code review ACK fa9ebedec3
benthecarman:
crACK fa9ebedec3
Tree-SHA512: dae7caee4b3862b23ebdf2acb7edec4baf75b0dbf1409b370b1a73aa6b632b317ebfac596dcbaf4edfb1301b513f45465ea75328962460f35e2af0d7e547c9ac
754f134a50 wallet: Add error message to GetReservedDestination (Andrew Chow)
87a0e7a3b7 Disallow bech32m addresses for legacy wallet things (Andrew Chow)
6dbe4d1072 Use BECH32M for tr() desc, WitV1Taproot, and WitUnknown CTxDests (Andrew Chow)
699dfcd8ad Opportunistically use bech32m change addresses if available (Andrew Chow)
0262536c34 Add OutputType::BECH32M (Andrew Chow)
177c15d2f7 Limit LegacyScriptPubKeyMan address types (Andrew Chow)
Pull request description:
Currently bech32m addresses are classfied as bech32. Because bech32m is incompatible with bech32, we need to define a new `OutputType` for it so that it can be handled correctly. This PR adds `OutputType::BECH32M`, updates all of the relevant `OutputType` classifications, and handle requests for bech32m addresses. There is now a `bech32m` address type string that can be used.
* `tr()` descriptors now report their output type as `OutputType::BECH32M`. `WtinessV1Taproot` and `WitnessUnknown` are also classified as `OutputType::BECH32M`.
* Bech32m addresses are completely disabled for legacy wallets. They cannot be imported (explicitly disallowed in `importaddress` and `importmulti`), will not be created when getting all destinations for a pubkey, and will not be added with `addmultisigaddress`. Additional protections have been added to `LegacyScriptPubKeyMan` to disallow attempting to retrieve bech32m addresses.
* Since Taproot multisigs are not implemented yet, `createmultisig` will also disallow the bech32m address type.
* As Taproot is not yet active, `DescriptorScriptPubKeyMan` cannot and will not create a `tr()` descriptor. Protections have been added to make sure this cannot occur.
* The change address type detection algorithm has been updated to return `bech32m` when there is a segwit v1+ output script and the wallet has a bech32m `ScriptPubKeyMan`, falling back to bech32 if one is not available.
ACKs for top commit:
laanwj:
re-review ACK 754f134a50
Sjors:
re-utACK 754f134: only change is switching to `bech32m` in two `wallet_taproot.py` test cases.
fjahr:
re-ACK 754f134a50
jonatack:
ACK 754f134a50
Tree-SHA512: 6ea90867d3631d0d438e2b08ce6ed930f37d01323224661e8e38f183ea5ee2ab65b5891394a3612c7382a1aff907b457616c6725665a10c320174017b998ca9f
fadddd13ee test: Add missing syncwithvalidationinterfacequeue (MarcoFalke)
faa211fc6e test: Misc cleanup (MarcoFalke)
fa1668bf50 test: Run pep-8 (MarcoFalke)
facd97ae0f scripted-diff: Renames (MarcoFalke)
Pull request description:
The index on the block filters is running in the background on the validation interface. To avoid intermittent test failures, it needs to be synced.
Also other cleanups.
ACKs for top commit:
lsilva01:
Tested ACK fadddd13ee on Ubuntu 20.04
Tree-SHA512: d858405db426a2f9d5620059dd88bcead4e3fba3ccc6bd8023f624b768fbcfa2203246fb0b2db620490321730d990f0e78063b21a26988c969cb126d4bd697bd
bdb8b9a347 test: doc: improve doc for `from_hex` helper (mention `to_hex` alternative) (Sebastian Falbesoner)
1914054208 scripted-diff: test: rename `FromHex` to `from_hex` (Sebastian Falbesoner)
a79396fe5f test: remove `ToHex` helper, use .serialize().hex() instead (Sebastian Falbesoner)
2ce7b47958 test: introduce `tx_from_hex` helper for tx deserialization (Sebastian Falbesoner)
Pull request description:
There are still many functional tests that perform conversions from a hex-string to a message object (deserialization) manually. This PR identifies all those instances and replaces them with a newly introduced helper `tx_from_hex`.
Instances were found via
* `git grep "deserialize.*BytesIO"`
and some of them manually, when it were not one-liners.
Further, the helper `ToHex` was removed and simply replaced by `.serialize().hex()`, since now both variants are in use (sometimes even within the same test) and using the helper doesn't really have an advantage in readability. (see discussion https://github.com/bitcoin/bitcoin/pull/22257#discussion_r652404782)
ACKs for top commit:
MarcoFalke:
review re-ACK bdb8b9a347😁
Tree-SHA512: e25d7dc85918de1d6755a5cea65471b07a743204c20ad1c2f71ff07ef48cc1b9ad3fe5f515c1efaba2b2e3d89384e7980380c5d81895f9826e2046808cd3266e
6168eb06b2 [test] Prevent intermittent issue (Amiti Uttarwar)
1d8193e2a2 [test] Remove GetAddrStore class (Amiti Uttarwar)
ef2f149bf2 [test] Update GetAddrStore callers to use AddrReceiver (Amiti Uttarwar)
e8c67ea19a [test] Add functionality to AddrReceiver (Amiti Uttarwar)
09dc073cff [test] Allow AddrReceiver to be used more generally (Amiti Uttarwar)
Pull request description:
A test refactor broken out from #21528 & a fix to #22243.
This PR:
1. consolidates the two helper classes into one, with the intent of making the test logic more clear & usable as we add more subtests to the file
2. hopefully fixes the test flakiness by bumping up the mocktime interval to ensure `m_next_addr_send` timer triggers
ACKs for top commit:
mzumsande:
Code-Review ACK 6168eb06b2
lsilva01:
Tested ACK 6168eb06b2 on Ubuntu 20.04
brunoerg:
tACK 6168eb06b2
Tree-SHA512: 248324f9d37e0e5ffe4acc437cd72ad9a2960abc868a97c6040a36e6ea8b59029127ac4f63fcf67d981a5bb4dbf2334bb2c23c541fae8e910d5523884bcedcba
d637a9b397 Taproot descriptor inference (Pieter Wuille)
c7388e5ada Report address as solvable based on inferred descriptor (Pieter Wuille)
29e5dd1a5b consensus refactor: extract ComputeTapleafHash, ComputeTaprootMerkleRoot (Pieter Wuille)
Pull request description:
Includes:
* First commit from #21365, adding TaprootSpendData in SigningProvider
* A refactor to expose ComputeTapleafHash and ComputeTaprootMerkleRoot from script/interpreter
* A tiny change to make `getaddressinfo` report tr() descriptors as solvable (so that inferred descriptors are shown), despite not having signing code for them.
* Logic to infer the script tree back from TaprootSpendData, and then use that to infer descriptors.
ACKs for top commit:
achow101:
re-ACK d637a9b397
Sjors:
re-utACK d637a9b
meshcollider:
Code review ACK d637a9b397
Tree-SHA512: 5ab9b95da662382d8549004be4a1297a577d7caca6b068f875c7c9343723931d03fa9cbf133de11f83b74e4851490ce820fb80413c77b9e8495a5f812e505d86
bb719a08db style: remove () from assert in rpc_setban.py (Vasil Dimov)
24b10ebda3 doc: fix grammar in doc/files.md (Vasil Dimov)
dd4e957dcd test: ensure banlist can be read from disk after restart (Vasil Dimov)
d197977ae2 banman: save the banlist in a JSON format on disk (Vasil Dimov)
Pull request description:
Save the banlist in `banlist.json` instead of `banlist.dat`.
This makes it possible to store Tor v3 entries in the banlist on disk
(and any other addresses that cannot be serialized in addrv1 format).
Only read `banlist.dat` if it exists and `banlist.json` does not exist (first start after an upgrade).
Supersedes https://github.com/bitcoin/bitcoin/pull/20904
Resolves https://github.com/bitcoin/bitcoin/issues/19748
ACKs for top commit:
jonatack:
Code review re-ACK bb719a08db per `git range-diff 6a67366 4b52c72 bb719a0`
achow101:
Code Review ACK bb719a08db
Tree-SHA512: fc135c3a1fe20bcf5d008ce6bea251b4135e56c78bf8f750b4bd8144c095b81ffe165133cdc7e4715875eec7e7c4e13ad9f5d2450b21102af063d7c8abf716b6
fafd9165e9 test: Add missing sync_all to feature_coinstatsindex (MarcoFalke)
Pull request description:
Sync the blocks before invalidating them to ensure all nodes are on the right tip. Otherwise nodes[0] might stay on the "stale" block and the test fails (intermittently)
ACKs for top commit:
jamesob:
crACK fafd9165e9
Tree-SHA512: ca567b97b839b56c91d52831eaac18d8c843d376be90c9fd8b49d2eb4a46b801a1d2402996d5dfe2bef3e2c9bd75d19ed443e3f42cc4679c5f20043ba556efc8
Adds an error output parameter to all GetReservedDestination functions
so that callers can get the actual reason that a change address could
not be fetched. This more closely matches GetNewDestination. This allows
for more granular error messages, such as one that indicates that
bech32m addresses cannot be generated yet.
We don't want the legacy wallet to ever have bech32m addresses so don't
allow importing them. This includes addmultisigaddress as that is a
legacy wallet only RPC
Additionally, bech32m multisigs are not available yet, so disallow them
in createmultisig.
The `on_addr` functionality of `AddrReceiver` tests logic specific to how the
addr messages are set up in the test bodies. To allow other callers to also use
`AddrReceiver`, only apply the assertion logic if the caller indicates
desirability by setting `test_addr_contents` to true when initializing the
class.
testshell in jupyter was failing due to an extra arg.
this adds a dummy -f param, which allows TestShell to
be used in a command line or jupyter environment
d6d2ab9845 test: MiniWallet: fix fee calculation for P2PK and check tx vsize (Sebastian Falbesoner)
ce024b1c0e test: MiniWallet: force P2PK signature to have fixed size (71 bytes) (Sebastian Falbesoner)
Pull request description:
This PR is a follow-up to #21945. It aims to both fix the fee calculation for P2PK mode transactions and enable its vsize check. Currently, the latter assumes a fixed tx length, which is fine for anyone-can-spend txs but doesn't apply to P2PK output spends due to varying DER signature size; the vsize check is therefore disabled for P2PK mode on master branch.
Creating one million DER signatures with MiniWallet shows the following distribution of sizes (smart people with better math skills probably could deduce the ratios without trying, but hey):
| DER signature size [bytes] | #occurences (ratio) |
| ------------- | ------------- |
| 71 | 498893 (49.89%) |
| 70 | 497244 (49.72%) |
| 69 | 3837 (0.38%) |
| 68 | 22 (0.0022%) |
Note that even smaller signatures are possible (for smaller R and S values with leading zero bytes), it's just that the probability decreases exponentially. Instead of choosing a large vsize check range and hoping that smaller signatures are never created (potentially leading to flaky tests), the proposed solution is ~~to limit the signature size to the two most common sizes 71 and 70 (>99.6% probability) and then accordingly only check for two vsize values; the value to be used for fee calculation is a decimal right between the two possible sizes (167.5 vbytes) and for the vsize check it's rounded down/up integer values are used.~~ to simply grind the signature to a fixed size of 71 bytes (49.89% probability, i.e. on average each call to `sign_tx()`, on average two ECC signing operations are needed).
~~The idea of grinding signatures to a fixed size (similar to https://github.com/bitcoin/bitcoin/pull/13666 which grinds to low-R values) would be counter-productive, as the signature creation in the test suite is quite expensive and this would significantly slow down tests that calculate hundreds of signatures (like e.g. feature_csv_activation.py).~~
For more about transaction sizes on different input/output types, see the following interesting article: https://medium.com/coinmonks/on-bitcoin-transaction-sizes-97e31bc9d816
ACKs for top commit:
MarcoFalke:
Concept ACK d6d2ab9845
Tree-SHA512: 011c70ee0e4adf9ba12902e4b6c411db9ae96bdd8bc810bf1d67713367998e28ea328394503371fc1f5087a819547ddaea56c073b28db893ae1c0031d7927f32
b9e76f1bf0 rpc: Add test for -rpcwaittimeout (Christian Decker)
f76cb10d7d rpc: Prefix rpcwaittimeout error with details on its nature (Christian Decker)
c490e17ef6 doc: Add release notes for the `-rpcwaittimeout` cli parameter (Christian Decker)
a7fcc8eb59 rpc: Add a `-rpcwaittimeout` parameter to limit time spent waiting (Christian Decker)
Pull request description:
Adds a new numeric `-rpcwaittimeout` that can be used to limit the
time we spend waiting on the RPC server to appear. This is used by
downstream projects to provide a bit of slack when `bitcoind`s RPC
interface is not available right away.
This makes the `-rpcwait` argument more useful, since we can now limit
how long we'll ultimately wait, before potentially giving up and reporting
an error to the caller. It was discussed in the context of the BTCPayServer
wanting to have c-lightning wait for the RPC interface to become available
but still have the option of giving up eventually ([4355]).
I checked with laanwj whether this is already possible ([comment]), and
whether this would be a welcome change. Initially I intended to repurpose
the (optional) argument to `-rpcwait`, however I decided against it since it
would potentially break existing configurations, using things like `rpcwait=1`,
or `rpcwait=true` (the former would have an unintended short timeout, when
old behavior was to wait indefinitely).
~Due to its simplicity I didn't implement a test for it yet, but if that's desired I
can provide one.~ Test was added during reviews.
[4355]: https://github.com/ElementsProject/lightning/issues/4355
[comment]: https://github.com/ElementsProject/lightning/issues/4355#issuecomment-768288261
ACKs for top commit:
laanwj:
Code review ACK b9e76f1bf0
promag:
ACK b9e76f1bf0.
Tree-SHA512: 3cd6728038ec7ca7c35c2e7ccb213bfbe963f99a49bb48bbc1e511c4dd23d9957c04f9af1f8ec57120e47b26eaf580b46817b099d5fc5083c98da7aa92db8638
With `banlist.dat` (being written in addrv1 format) if we would try to
write a Tor v3 subnet, it would serialize as a dummy-all-0s IPv6
address and subsequently, when deserialized will not result in the same
subnet.
This problem does not exist with `banlist.json` where the data is saved
in textual, human-readable form.
30aee2dfe6 tests: Add test for compact block HB selection (Pieter Wuille)
6efbcec4de Protect last outbound HB compact block peer (Suhas Daftuar)
Pull request description:
If all our high-bandwidth compact block serving peers (BIP 152) stall block
download, then we can be denied a block for (potentially) a long time. As
inbound connections are much more likely to be adversarial than outbound
connections, mitigate this risk by never removing our last outbound HB peer if
it would be replaced by an inbound.
ACKs for top commit:
achow101:
ACK 30aee2dfe6
ariard:
Code ACK 30aee2dfe
jonatack:
ACK 30aee2dfe6
Tree-SHA512: 5c6c9326e3667b97e0864c371ae2174d2be9054dad479f4366127b9cd3ac60ffa01ec9707b16ef29cac122db6916cf56fd9985733390017134ace483278921d5
fa7d71f270 test: Run pep-8 on touched test (MarcoFalke)
fab7e99c2a test: Use MiniWallet in test_no_inherited_signaling RBF test (MarcoFalke)
fab871f649 test: Remove unused generate() from test (MarcoFalke)
faff3f35b7 test: Add txin.sequence option to MiniWallet (MarcoFalke)
Pull request description:
This comes with nice benefits:
* Less code and complexity
* Test can be run without wallet compiled in
Also add some additional checks for `getmempoolentry` (#22209) and other cleanups 🎨
ACKs for top commit:
mjdietzx:
Tested ACK fa7d71f270 thanks for the explanations, nicely done
theStack:
ACK fa7d71f270🍷
Tree-SHA512: 0e9b8fe985779d8d7034d256deed627125bb374b6ae2972c461b3a220739a51061c6147ad69339bee16282f82716c7f3f8a7a89c693ceb1e47ea50709272332a
55311197c4 Added new test for future blocks reacceptance (sanket1729)
511a5af462 Fixed inconsistencies between code and comments (sanket1729)
Pull request description:
This Commit does 3 things:
1) Adds a test case for checking reacceptance a previously rejected block which
was too far in the future.
~~2) clean up uses of rehash or calc_sha256 where it was not needed~~
3) While constructing block 44, this commit makes the code consistent with the expected figure in
the comment just above it by adding a transaction to the block.
4) Fix comment describing `sign_tx()` function
ACKs for top commit:
duncandean:
reACK 5531119
brunoerg:
reACK 55311197c4
Tree-SHA512: d40c72fcdbb0b2a0715adc58441eeea08147ee2ec5e371a4ccc824ebfdc6450698bd40aaeecb7ea7bfdb3cd1b264dd821b890276fff8b8d89b7225cdd9d6b546
451b96f7d2 test: kill process group to avoid dangling processes (S3RK)
Pull request description:
This is an alternative to #19281
This PR fixes a problem when after test failure with `--failfast` option there could be dangling nodes. The nodes will continue to occupy rpc/p2p ports on the machine and will cause further test failures.
If there are any dangling nodes left at the end of the test run we kill the whole process group.
Pros: the operations is immediate and won't lead to CI timeout
Cons: the test_runner process is also killed and exit code is 137
Example output:
```
...
Early exiting after test failure
TEST | STATUS | DURATION
rpc_decodescript.py | ✓ Passed | 2 s
rpc_deprecated.py | ✓ Passed | 2 s
rpc_deriveaddresses.py | ✓ Passed | 2 s
rpc_dumptxoutset.py | ✖ Failed | 2 s
ALL | ✖ Failed | 8 s (accumulated)
Runtime: 4 s
Killed: 9
> echo $?
137
```
ACKs for top commit:
MarcoFalke:
review ACK 451b96f7d2
aitorjs:
ACK 451b96f7d2. Manual testing with and without **--failfast**.
Tree-SHA512: 87e510a1411b9e7571e63cf7ffc8b9a8935daf9112ffc0f069d6c406ba87743ec439808181f7e13cb97bb200fad528589786c47f0b43cf3a2ef0d06a23cb86dd
458a345b05 Add support for SIGHASH_DEFAULT in RPCs, and make it default (Pieter Wuille)
c0f0c8eccb tests: check spending of P2TR (Pieter Wuille)
a2380127e9 Basic Taproot signing logic in script/sign.cpp (Pieter Wuille)
49487bc3b6 Make GetInputUTXO safer: verify non-witness UTXO match (Pieter Wuille)
fd3f6890f3 Construct and use PrecomputedTransactionData in PSBT signing (Pieter Wuille)
5cb6502ac5 Construct and use PrecomputedTransactionData in SignTransaction (Pieter Wuille)
5d2e22437b Don't nuke witness data when signing fails (Pieter Wuille)
ce9353164b Permit full precomputation in PrecomputedTransactionData (Pieter Wuille)
e841fb503d Add precomputed txdata support to MutableTransactionSignatureCreator (Pieter Wuille)
a91d532338 Add CKey::SignSchnorr function for BIP 340/341 signing (Pieter Wuille)
e77a2839b5 Use HandleMissingData also in CheckSchnorrSignature (Pieter Wuille)
dbb0ce9fbf Add TaprootSpendData data structure, equivalent to script map for P2[W]SH (Pieter Wuille)
Pull request description:
Builds on top of #22051, adding signing support after derivation support.
Nothing is changed in descriptor features. Signing works for key path and script path spending, through the normal sending functions, and PSBT-based RPCs. However, PSBT usability is rather low as no extensions have been defined to convey Taproot-specific information, so all script information must be known to the signing wallet.
ACKs for top commit:
achow101:
re-ACK 458a345b05
fjahr:
Code review ACK 458a345b05
Sjors:
ACK 458a345b05
Tree-SHA512: 30ed212cf7754763a4a81624ebc084c51727b8322711ac0b390369213c1a891d367ed8b123882ac08c99595320c11ec57ee42304ff22a69afdc3d1a0d55cc711
754e802274 test: check rejected future block later accepted (Luke Dashjr)
Pull request description:
(Luke) was unsure if the code sufficiently avoided caching a
time-too-new rejection, so wrote this test to check it. It looks like
despite only exempting BLOCK_MUTATED, it is still okay because header
failures never cache block invalidity. This test will help ensure that
if this ever changes, BLOCK_TIME_FUTURE gets excluded at the same time.
This PR re-opens https://github.com/bitcoin/bitcoin/pull/17872 which went stale and addresses the nits raised by reviewers there.
ACKs for top commit:
MarcoFalke:
review ACK 754e802274
Tree-SHA512: a2bbc8fffb523cf2831e1ecb05f20868e30106a38cc2e369e4973fa549cca06675a668df16f76c49cc4ce3a22925404255e5c53c4232d63ba1b9fca878509aa0
1) Makes the code for block 44 consistent with the expected figure in
the comment above it by adding a transaction to the block
2) Fixed comment describing sign_tx() function
(Luke) was unsure if the code sufficiently avoided caching a
time-too-new rejection, so wrote this test to check it. It looks like
despite only exempting BLOCK_MUTATED, it is still okay because header
failures never cache block invalidity. This test will help ensure that
if this ever changes, BLOCK_TIME_FUTURE gets excluded at the same time.
Co-authored-by: Will Clark <will8clark@gmail.com>
01eedf3821 test: doc: improve doc for chain_transaction() helper (Sebastian Falbesoner)
6e63e366d6 test: refactor: dedup utility function chain_transaction() (Sebastian Falbesoner)
Pull request description:
Both tests `mempool_packages.py` and `mempool_package_onemore.py` define a utility function `chain_transaction` with a similar implementation. This PR deduplicates it by moving it into the util package and keeping the more general properties:
* pass a list of parent_txids/vouts instead of single values
* always mark the BIP125-replaceable flag for txs, created via `createrawtransaction` (this is needed by the `mempool_package_onemore.py` test, but doesn't hurt the other one)
This is a low-hanging fruit; as a potential follow-up one could probably also deduplicate the function `chain_transaction` in `rpc_packages.py`, which looks a bit different, as it also takes the parent locking script into account and doesn't send the tx.
ACKs for top commit:
mjdietzx:
reACK 01eedf3821
klementtan:
Code review ACK 01eedf3821
MarcoFalke:
review ACK 01eedf3821🙅
Tree-SHA512: ac7105d02c23f53d76d4ec9dc8de1074dd8faefeecd44b107921b78665279498966152fed312ecbe252a1c34a9643d531166329a4fea0e773df3bb75d43092b0
fbf485c9b2 Allow tr() import only when Taproot is active (Andrew Chow)
Pull request description:
To avoid issues around fund loss, only allow descriptor wallets to import `tr()` descriptors after taproot has activated.
ACKs for top commit:
sipa:
utACK fbf485c9b2
fjahr:
Code review ACK fbf485c9b2
laanwj:
Code review ACK fbf485c9b2
prayank23:
utACK fbf485c9b2
Tree-SHA512: 83c43376515eea523dbc89bc5a0fde53e54aec492e49a40c2a33d80fc94aac459e232ae07b024b4bd75b58078c8d090bc7a2d69541c5d3d4834d2f4cfc9c8208
In order to enable exact fee calculation for transactions that spend
P2PK outputs in the MiniWallet, we enforce the created signatures to
have a fixed length (>49.89% probability) by default. With that it is
easier to check the created transactions vsize and avoid flaky tests
that would appear whenever the signatures R- or S-values are smaller
(due to leading zero bytes).
Note that to get the total scriptSig size one has to add another
2 bytes, as there is also the OP_PUSHx instruction on the front and
the sighash type byte on the back, leading to a final scriptSig size
of 73 bytes.
2eb0eeda39 validation: document lack of inherited signaling in RBF policy (Antoine Riard)
906b6d9da6 test: Extend feature_rbf.py with no inherited signaling (Antoine Riard)
Pull request description:
Contrary to BIP125 or other full-node implementation (e.g btcd), Bitcoin Core's mempool policy doesn't implement inherited signaling.
This PR documents our mempool behavior on this and add a test demonstrating the case.
ACKs for top commit:
jonatack:
ACK 2eb0eeda39
benthecarman:
ACK 2eb0eeda39
Tree-SHA512: d41453d3b49bae3c1eb532a968f43bc047084913bd285929d4d9cba142777ff2be38163d912e28dfc635f4ecf446de68effad799c6e71be52f81e83410c712fb
Add an explicit sync_blocks call in wallet_orphanedreward.py, which was
missing and could lead to intermittent failures of the test due to
race conditions.
This will presumably fix https://github.com/bitcoin/bitcoin/issues/22181.
faa94961d6 test: Add temporary logging to debug #20975 (MarcoFalke)
Pull request description:
to be reverted after a fix
ACKs for top commit:
laanwj:
Code review ACK faa94961d6
Tree-SHA512: 1f3103fcf4cad0af54e26c4d257bd824b128b5f2d2b81c302e861a829fd55d6a099fa476b79b30a71fe98975ae604b9e3ff31fd48a51d442389a9bd515e60ba0
68ace23fa3 test: convert docs into type annotations in test_framework/test_node.py (fanquake)
8bfcba36db test: convert docs into type annotations in test_framework/wallet.py (fanquake)
b043ca8e8b test: convert docs into type annotations in test_framework/util.py (fanquake)
Pull request description:
Rather than having function types exist as documentation, make them type annotations, which enables more `mypy` checking.
ACKs for top commit:
instagibbs:
utACK 68ace23fa3
Tree-SHA512: b705f26b48baabde07b9b2c0a8d547b4dcca291b16eaf5ac70462bb3a1f9e9c2783d93a9d4290889d0cbb3f7db3671446754411a1f498b265d336f6ff33478df
62cb8d98d2 qt: Drop BitcoinGUI* WalletFrame data member (Hennadii Stepanov)
f73e5c972a qt: Move CreateWalletActivity connection from WalletFrame to BitcoinGUI (Hennadii Stepanov)
20e2e24e90 qt: Move WalletView connections from WalletFrame to BitcoinGUI (Hennadii Stepanov)
Pull request description:
This PR:
- implements an idea from https://github.com/bitcoin/bitcoin/pull/17937#issuecomment-575991765
- simplifies `WalletFrame` class interface
- as a side effect, removes `bitcoingui` -> `walletframe` -> `bitcoingui` circular dependency
- is an alternative to https://github.com/bitcoin/bitcoin/pull/17500
ACKs for top commit:
promag:
Tested ACK 62cb8d98d2 on macos 11.2.3 with depends build.
jarolrod:
ACK 62cb8d98d2
Tree-SHA512: 633b526a8499ba9ab4b16928daf4de4f6d610284bb9fa51891cad35300a03bde740df3466a71b46e87a62121330fcc9e606eac7666ea5e45fa6d5785b60dcbbd
fa2b6c62cd test: Remove unused node from feature_nulldummy (MarcoFalke)
Pull request description:
This is confusing and might even slow down the test.
This reverts a change that was added a year ago in d438d60 and then the need for it was removed by 95d5d5e six months ago.
Top commit has no ACKs.
Tree-SHA512: 9a86792e9a634cf7bbd4e7a21b1acdfc3baba1b1962fe2b9b73848436d10351d2326dca01313c097ba2342dde7207add73e731d053c0bfa888a5d8f2b233a7cf
e4356f6a6c Testcase for wallet issue with orphaned rewards. (Daniel Kraft)
Pull request description:
This adds a new test case demonstrating the wallet issue when block rewards are orphaned (#14148).
ACKs for top commit:
LarryRuane:
ACK e4356f6a6c
leonardojobim:
reACK e4356f6a6c .
Tree-SHA512: e9a2310ee1b3d52cfa302f431ed3d272bbc1b9195439ff318d9eb1006c0b28968dbe840e1600b6ff185e5d7ea57e4dcc837cef16051b5537445e10bc363b8c22
2667366aaa tests: check derivation of P2TR (Pieter Wuille)
7cedafc541 Add tr() descriptor (derivation only, no signing) (Pieter Wuille)
90fcac365e Add TaprootBuilder class (Pieter Wuille)
5f6cc8daa8 Add XOnlyPubKey::CreateTapTweak (Pieter Wuille)
2fbfb1becb Make consensus checking of tweaks in pubkey.* Taproot-specific (Pieter Wuille)
a4bf84039c Separate WitnessV1Taproot variant in CTxDestination (Pieter Wuille)
41839bdb89 Avoid dependence on CTxDestination index order (Pieter Wuille)
31df02a070 Change Solver() output for WITNESS_V1_TAPROOT (Pieter Wuille)
4b1cc08f9f Make XOnlyPubKey act like byte container (Pieter Wuille)
Pull request description:
This is a subset of #21365, to aide review.
This adds support `tr(KEY)` or `tr(KEY,SCRIPT)` or `tr(KEY,{{S1,{{S2,S3},...}},...})` descriptors, describing Taproot outputs with specified internal key, and optionally any number of scripts, in nested groups of 2 inside `{`/`}` if there are more than one. While it permits importing `tr(KEY)`, anything beyond that is just laying foundations for more features later.
Missing:
* Signing support (see #21365)
* Support for more interesting scripts inside the tree (only `pk(KEY)` is supported for now). In particular, a multisig policy based on the new `OP_CHECKSIGADD` opcode would be very useful.
* Inferring `tr()` descriptors from outputs (given sufficient information).
* `getaddressinfo` support.
* MuSig support. Standardizing that is still an ongoing effort, and is generally kind of useless without corresponding PSBT support.
* Convenient ways of constructing descriptors without spendable internal key (especially ones that arent't trivially recognizable as such).
ACKs for top commit:
Sjors:
utACK 2667366 (based on https://github.com/bitcoin/bitcoin/pull/21365#issuecomment-846945215 review, plus the new functional test)
achow101:
Code Review ACK 2667366aaa
lsilva01:
Tested ACK 2667366aaa
meshcollider:
utACK 2667366aaa
Tree-SHA512: 61046fef22c561228338cb178422f0b782ef6587ec8208d3ce2bd07afcff29a664b54b35c6b01226eb70b6540b43f6dd245043d09aa6cb6db1381b6042667e75
5d82a57db4 contrib: remove torv2 seed nodes (Jon Atack)
5f7e086dac contrib: update generate-seeds.py to ignore torv2 addresses (Jon Atack)
8be56f0f8e p2p, refactor: extract OnionToString() from CNetAddr::ToStringIp() (Jon Atack)
5f9d3c09b4 p2p: remove torv2 from CNetAddr::ToStringIP() (Jon Atack)
3d39042144 p2p: remove torv2 in SetIP() and ADDR_TORV2_SIZE constant (Jon Atack)
cff5ec477a p2p: remove pre-addrv2 onions from SerializeV1Array() (Jon Atack)
4192a74413 p2p: ignore torv2-in-ipv6 addresses in SetLegacyIPv6() (Jon Atack)
1d631e956f p2p: remove BIP155Network::TORV2 from GetBIP155Network() (Jon Atack)
7d1769bc45 p2p: remove torv2 from SetNetFromBIP155Network() (Jon Atack)
eba9a94b9f fuzz: rename CNetAddr/CService deserialize targets (Jon Atack)
c56a1c9b18 p2p: drop onions from IsAddrV1Compatible(), no longer relay torv2 (Jon Atack)
f8e94002fc p2p: remove torv2/ADDR_TORV2_SIZE from SetTor() (Jon Atack)
0f1c58ae87 test: update feature_proxy to torv3 (Jon Atack)
Pull request description:
This patch removes support in Bitcoin Core for Tor v2 onions, which are already removed from the release of Tor 0.4.6.
- no longer serialize/deserialize and relay Tor v2 addresses
- ignore incoming Tor v2 addresses
- remove Tor v2 addresses from the addrman and peers.dat on node launch
- update generate-seeds.py to ignore Tor v2 addresses
- remove Tor v2 hard-coded seeds
Tested with tor-0.4.6.1-alpha (no v2 support) and 0.4.5.7 (v2 support). With the latest Tor (no v2 support), this removes all the warnings like those reported with current master in https://github.com/bitcoin/bitcoin/issues/21351
```
<bitcoind debug log>
Socks5() connect to […].onion:8333 failed: general failure
<tor log>
Invalid hostname [scrubbed]; rejecting
```
and the addrman no longer has Tor v2 addresses on launching bitcoind.
```rake
$ ./src/bitcoin-cli -addrinfo
{
"addresses_known": {
"ipv4": 44483,
"ipv6": 8467,
"torv2": 0,
"torv3": 2296,
"i2p": 6,
"total": 55252
}
}
```
After recompiling back to current master and restarting with either of the two Tor versions (0.4.5.7 or 0.4.6.1), -addrinfo initially returns 0 Tor v2 addresses and then begins finding them again.
Ran nodes on this patch over the past week on mainnet/testnet/signet/regtest after building with DEBUG_ADDRMAN.
Verified that this patch bootstraps an onlynet=onion node from the Tor v3 hardcoded fixed seeds on mainnet and testnet and connects to blocks and v3 onion peers: `rm ~/.bitcoin/testnet3/peers.dat ; ./src/bitcoind -testnet -dnsseed=0 -onlynet=onion`
Tested using `addnode`, `getaddednodeinfo`,`addpeeraddress`, `disconnectnode` and `-addrinfo` that a currently valid, connectable Tor v2 peer can no longer be added:
Thanks to Vasil Dimov, Carl Dong, and Wladimir J. van der Laan for their work on BIP155 and Tor v3 that got us here.
ACKs for top commit:
laanwj:
Code review ACK 5d82a57db4
Tree-SHA512: 590ff3d2f6ef682608596facb4b01f44fef69716d2ab3552ae1655aa225f4bf104f9ee08d6769abb9982a8031de93340df553279ce1f5023771f9f2b651178bb
44d05d0a69 test: remove sanitizer suppression for nanobench (Martin Ankerl)
e3c866e3ca test: update nanobench from release 4.0.0 to 4.3.4 (Martin Ankerl)
Pull request description:
This updates the third-party library nanobench with the latest release. It contains mostly minor bugfixes, a new pyperf output format, ability to suppress warnings with environment variable `NANOBENCH_SUPPRESS_WARNINGS`. Full changelog:
v4.0.2
* Changed `doNotOptimizeAway` to what google benchmark is doing. The old code did not work on some machines.
* fix: display correct "total" value
* minor Documentation updates
v4.1.0
* Updated link to new pyperf home
* Adds ability to configure console output time unit
* Add support for environment variable `NANOBENCH_SUPPRESS_WARNINGS`
* Nanobench is now usable with CMake's FetchContent (see documentation: https://nanobench.ankerl.com/tutorial.html#cmake-integration)
v4.2.0
* Ability to store and later compare results added, through `pyperf`.
* See https://nanobench.ankerl.com/tutorial.html#pyperf-python-pyperf-module-output
* Added lots of build targets to travis, similar to bitcoin's build.
* Some minor API & documentation improvements
v4.3.0
* `ankerl::nanobench::Rng` can now return the state with `std::vector<uint64_t> Rng::state()`, and this can also be used to initialize the Rng.
v4.3.1
* Minor cmake improvements when integrationg as a third-party library: add alias `nanobench::nanobench`, default to C++17
v4.3.2
* Fixed a MSVC 2015 build problem
* updates license to 2021.
* build should now work with very old linux headers
* Also disable UBSAN (bitcoin needed to add a suppression)
v4.3.3
* Do not use locale-dependent `std::to_string`
v4.3.4
* Add missing sanitizer suppression to `rotl`
ACKs for top commit:
MarcoFalke:
review ACK 44d05d0a69
Tree-SHA512: 3291c85057720cfc84a44bfaa305a7d0df4dc35779169d20de73d32e40d4cdbf3f005bf343f79710eca517441de2459e8118c195c5f5136f99d1f50ebd5dfd08
a3f0cbf82d test: run mempool_reorg.py even with wallet disabled (Darius Parvin)
Pull request description:
Run mempool_reorg.py test even when the wallet is disabled, as discussed in #20078.
As part of this PR I created a new method in `MiniWallet`, `create_self_transfer`, to return a raw tx (without broadcasting it) and its associated utxo.
ACKs for top commit:
MarcoFalke:
cr ACK a3f0cbf82d
Tree-SHA512: 316a38faffadcb87499c1d6eca21e9696cef65362bbffcf621788a9b771bb1fa2971b1c7835cbd34b952d7612ad83afbca824cd8be39ecd6b994e8963027f991
In #21738 an ASAN suppression for nanobench was added. This is not needed any more,as nanobench.h already includes the necessary suppressions for the relevant code.
The functions cltv_modify_tx(), cltv_invalidate() and cltv_validate()
all modify the passed transaction in-place, i.e. there is no need
to return a copy.
- run mempool_reorg.py even when the wallet is not compiled
- add `locktime` argument to `create_self_transfer` and `send_self_transfer`
- use more logs instead of comments
bfa9309ad6 Use COINBASE_MATURITY constant in functional tests. (Kiminuo)
525448df9d Move COINBASE_MATURITY from `feature_nulldummy` test to `blocktools`. (Kiminuo)
Pull request description:
`COINBASE_MATURITY` constant was added to `feature_nulldummy` test in #21373. This PR moves the constant to `blocktools.py` file and uses the constant in more tests as suggested [here](https://github.com/bitcoin/bitcoin/pull/21373#discussion_r605418462).
Edit: Goal of this PR is to replace integer constants with `COINBASE_MATURITY` but not necessarily in *all* cases because that would mean to read and fully understand all tests. That's out of my time constraints. Any reports where `COINBASE_MATURITY` should be used are welcome though!
ACKs for top commit:
theStack:
ACK bfa9309ad6🌇
Tree-SHA512: 01f04645f05a39028681f355cf3d42dd63ea3303f76d93c430e0fdce441934358a2d847a54e6068d61932f1b75e1d406f51859b057b3e4b569f7083915cb317f
2be3572506 test: Fix IPv6 check on BSD systems (nthumann)
Pull request description:
I noticed that `test_ipv6_local()` always returns `False` on macOS or FreeBSD, even though IPv6 is working perfectly fine. This causes `test/functional/rpc_bind.py --ipv6` and `test/functional/feature_proxy.py` to skip their run.
Apparently, there's a check if the port number is `0` (see [here](64881da478/sys/netinet6/udp6_usrreq.c (L248)) or [here](8f02f2a044/bsd/netinet6/udp6_usrreq.c (L282))), while Linux has no problem with this.
This is fixed by specifying any other port number than `0`, e.g. `1`. Still, because of `SOCK_DGRAM`, no actual connection is made.
ACKs for top commit:
fanquake:
ACK 2be3572506 - nice improvement. I checked that with this change ipv6 related tests in `feature_proxy.py` are being run.
theStack:
ACK 2be3572506
Tree-SHA512: 8417c2d3cf71050529f3fa409a03872040fe5d249eae4172f276e62156e505a20d375b963712a186c9ad7967d8a497b5900d327c74a9693f68c33063871d4691
c7bd5842e4 MOVEONLY: CWallet transaction code out of wallet.cpp/.h (Russell Yanofsky)
Pull request description:
This commit just moves function without making any changes. It can be reviewed with `git log -p -n1 --color-moved=dimmed_zebra`
Motivation for this change is to make `wallet.cpp/h` less monolithic and start to make wallet transaction state tracking comprehensible so bugs in https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Transaction-Conflict-Tracking can be fixed safely without introducing new problems.
This moves wallet classes and methods that deal with transactions out of `wallet.cpp/.h` into better organized files:
- `transaction.cpp/.h` - CWalletTx and CMerkleTx class definitions
- `receive.cpp/.h` - functions checking received transactions and computing balances
- `spend.cpp/.h` - functions creating transactions and finding spendable coins
After #20773, when loading is separated from syncing it will also be possible to move more `wallet.cpp/.h` functions to:
- `sync.cpp/.h` - functions handling chain notifications and rescanning
This commit arranges `receive.cpp` and `spend.cpp` functions in dependency order so it's possible to skim `receive.cpp` and get an idea of how computing balances works, and skim `spend.cpp` and get an idea of how transactions are created, without having to jump all over `wallet.cpp` where functions are not in order and there is a lot of unrelated code.
Followup commit "refactor: Detach wallet transaction methods" in https://github.com/bitcoin/bitcoin/pull/21206 follows up this PR and tweaks function names and arguments to reflect new locations. The two commits are split into separate PRs because this commit is more work to maintain and less work to review, while the other commit is less work to maintain and more work to review, so hopefully this commit can be merged earlier.
ACKs for top commit:
Sjors:
re-utACK c7bd5842e4
fjahr:
utACK c7bd5842e4
promag:
Code review ACK c7bd5842e4, verified move only claim.
meshcollider:
Dimmed-zebra-check and functional test run ACK c7bd5842e4
Tree-SHA512: 4981de6911cb1196774db375494355cc9af59b52456129c002d264a77cd9ed6175f8ecbb6b2f492a59a4d5a0def21a39d96fa79c9f4d99be0992985f553be32f
13650fe2e5 [policy] detect unsorted packages (glozow)
9ef643e21b [doc] add release note for package testmempoolaccept (glozow)
c4259f4b7e [test] functional test for packages in RPCs (glozow)
9ede34a6f2 [rpc] allow multiple txns in testmempoolaccept (glozow)
ae8e6df709 [policy] limit package sizes (glozow)
c9e1a26d1f [fuzz] add ProcessNewPackage call in tx_pool fuzzer (glozow)
363e3d916c [test] unit tests for ProcessNewPackage (glozow)
cd9a11ac96 [test] make submit optional in CreateValidMempoolTransaction (glozow)
2ef187941d [validation] package validation for test accepts (glozow)
578148ded6 [validation] explicit Success/Failure ctors for MempoolAcceptResult (glozow)
b88d77aec5 [policy] Define packages (glozow)
249f43f3cc [refactor] add option to disable RBF (glozow)
897e348f59 [coins/mempool] extend CCoinsViewMemPool to track temporary coins (glozow)
42cf8b25df [validation] make CheckSequenceLocks context-free (glozow)
Pull request description:
This PR enables validation dry-runs of packages through the `testmempoolaccept` RPC. The expectation is that the results returned from `testmempoolaccept` are what you'd get from test-then-submitting each transaction individually, in that order (this means the package is expected to be sorted in topological order, for now at least). The validation is also atomic: in the case of failure, it immediately halts and may return "unfinished" `MempoolAcceptResult`s for transactions that weren't fully validated. The API for 1 transaction stays the same.
**Motivation:**
- This allows you to test validity for transaction chains (e.g. with multiple spending paths and where you don't want to broadcast yet); closes#18480.
- It's also a first step towards package validation in a minimally invasive way.
- The RPC commit happens to close#21074 by clarifying the "allowed" key.
There are a few added restrictions on the packages, mostly to simplify the logic for areas that aren't critical to main package use cases:
- No package can have conflicts, i.e. none of them can spend the same inputs, even if it would be a valid BIP125 replacement.
- The package cannot conflict with the mempool, i.e. RBF is disabled.
- The total count of the package cannot exceed 25 (the default descendant count limit), and total size cannot exceed 101KvB (the default descendant size limit).
If you're looking for review comments and github isn't loading them, I have a gist compiling some topics of discussion [here](https://gist.github.com/glozow/c3acaf161c95bba491fce31585b2aaf7)
ACKs for top commit:
laanwj:
Code review re-ACK 13650fe2e5
jnewbery:
Code review ACK 13650fe2e5
ariard:
ACK 13650fe
Tree-SHA512: 8c5cbfa91a6c714e1c8710bb281d5ff1c5af36741872a7c5df6b24874d6272b4a09f816cb8a4c7de33ef8e1c2a2c252c0df5105b7802f70bc6ff821ed7cc1a2f
This commit just moves functions without making any changes. It can be
reviewed with `git log -p -n1 --color-moved=dimmed_zebra`
Motivation for this change is to make wallet.cpp/h less monolithic and
start to make wallet transaction state tracking comprehensible so bugs
in
https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Transaction-Conflict-Tracking
can be fixed safely without introducing new problems.
This commit moves wallet classes and methods that deal with transactions
out of wallet.cpp/.h into better organized files:
- transaction.cpp/.h - CWalletTx and CMerkleTx class definitions
- receive.cpp/.h - functions checking received transactions and computing balances
- spend.cpp/.h - functions creating transactions and finding spendable coins
After #20773, when loading is separated from syncing it will also be
possible to move more wallet.cpp/.h functions to:
- sync.cpp/.h - functions handling chain notifications and rescanning
This commit arranges receive.cpp and spend.cpp functions in dependency
order so it's possible to skim receive.cpp and get an idea of how
computing balances works, and skim spend.cpp and get an idea of how
transactions are created, without having to jump all over wallet.cpp
where functions are not in order and there is a lot of unrelated code.
Followup commit "refactor: Detach wallet transaction methods" in
https://github.com/bitcoin/bitcoin/pull/21206 follows up this PR and
tweaks function names and arguments to reflect new locations. The two
commits are split into separate PRs because this commit is more work to
maintain and less work to review, while the other commit is less work to
maintain and more work to review, so hopefully this commit can be merged
earlier.
e6fe1c37d0 rpc: Improve avoidpartialspends and avoid_reuse documentation (Fabian Jahr)
8f073076b1 wallet: Increase OUTPUT_GROUP_MAX_ENTRIES to 100 (Fabian Jahr)
Pull request description:
Follow-up to #17824.
This increases OUTPUT_GROUP_MAX_ENTRIES to 100 which means that OutputGroups will now be up to 100 outputs large, up from previously 10. The main motivation for this change is that during the PR review club on #17824 [several participants signaled](https://bitcoincore.reviews/17824.html#l-339) that 100 might be a better value here.
I think fees should be manageable for users but more importantly, users should know what they can expect when using the wallet with this configuration, so I also tried to clarify the documentation on `-avoidpartialspends` and `avoid_reuse` a bit. If there are other additional ways how or docs where users can be made aware of the potential consequences of using these parameters, please let me know. Another small upside is that [there seem to be a high number of batching transactions with 100 and 200 inputs](https://miro.medium.com/max/3628/1*sZ5eaBSbsJsHx-J9iztq2g.png)([source](https://medium.com/@hasufly/an-analysis-of-batching-in-bitcoin-9bdf81a394e0)) giving these transactions a bit of a larger anonymity set, although that is probably a very weak argument.
ACKs for top commit:
jnewbery:
ACK e6fe1c37d0
Xekyo:
retACK e6fe1c37d0
rajarshimaitra:
tACK `e6fe1c3`
achow101:
ACK e6fe1c37d0
glozow:
code review ACK e6fe1c37d0
Tree-SHA512: 79685c58bafa64ed8303b0ecd616fce50fc9a2b758aa79833e4ad9f15760e09ab60c007bc16ab4cbc4222e644cfd154f1fa494b0f3a5d86faede7af33a6f2826
Only allow "packages" with no conflicts, sorted in order of dependency,
and no more than 25 for now. Note that these groups of transactions
don't necessarily need to adhere to some strict definition of a package
or have any dependency relationships. Clients are free to pass in a
batch of 25 unrelated transactions if they want to.
For the MiniWallet constructor, the two boolean parameters
"raw_script" and "use_p2pk" are replaced by a single parameter of the
newly introduced type MiniWalletMode (derived by enum.Enum), which can
hold the following values:
- ADDRESS_OP_TRUE
- RAW_OP_TRUE
- RAW_P2PK
4bea301692 test: use P2PK-MiniWallet for feature_csv_activation.py (Sebastian Falbesoner)
dc7eb64e83 test: MiniWallet: add P2PK support (Sebastian Falbesoner)
Pull request description:
This PR adds support for creating and spending transactions with raw pubkey (P2PK) outputs to MiniWallet, [as suggested by MarcoFalke](https://github.com/bitcoin/bitcoin/pull/21900#discussion_r629524841). Using that mode in the test `feature_csv_activation.py`, all txs submitted to the mempool follow the standard policy, i.e. `-acceptnonstdtxn=1` can be removed.
Possible follow-ups:
* Improve MiniWallet constructor Interface; an enum-like parameter instead of two booleans would probably be better
* Look at other tests that could benefit from P2PK (e.g. feature_cltv.py?)
* Check vsize also for P2PK txs (vsize varies due to signature, i.e. a range has to be asserted)
ACKs for top commit:
laanwj:
Code review ACK 4bea301692
Tree-SHA512: 9b428e6b7cfde59a8c7955d5096cea88af1384a5f49723f00052e9884d819d952d20a5ab39bb02f9d8b6073769c44462aa265d84a33e33da33c2d21670c488a6
Using the MiniWallet in P2PK mode, all transactions submitted to the
mempool are following the standard policy now, i.e. the node command
line parameter '-acceptnonstdtxn=1' is not needed anymore.
9c891b64ff net: initialize nMessageSize to max uint32_t instead of -1 (eugene)
Pull request description:
nMessageSize is uint32_t and is set to -1. This will warn with `-fsanitize=implicit-integer-sign-change` when V1TransportDeserializer calls into the ctor. This pull initializes nMessageSize to `numeric_limits<uint32_t>::max()` instead and removes the ubsan suppression.
ACKs for top commit:
laanwj:
Code review ACK 9c891b64ff
promag:
Code review ACK 9c891b64ff.
Tree-SHA512: f05173d9553a01d207a5a7f8ff113d9e11354c50b494a67d44d3931c151581599a9da4e28f40edd113f4698ea9115e6092b2a5b7329c841426726772076c1493
bd7f27d16d refactor: feature_csv_activation.py: move tx helper functions to methods (Sebastian Falbesoner)
2eca46b0aa test: use MiniWallet for feature_csv_activation.py (Sebastian Falbesoner)
Pull request description:
This PR enables one more of the non-wallet functional tests (feature_csv_activation.py) to be run even with the Bitcoin Core wallet disabled by using the new MiniWallet instead, as proposed in #20078.
Short reviewers guideline:
- Since we exclusively work with anyone-can-spend outputs here (raw scriptPubKey = OP_TRUE), signing is not needed anymore. The function `sign_transaction` and its calls are removed, after changing a tx (e.g. its scriptSig or nVersion) a simple `.rehash()` call is sufficient. Also, generating an address `self.nodeaddress` (and with that, passing it to the the various test tx creation/sending helper methods) is not needed anymore and removed.
- The test repeatedly uses the same input for creating different txs (e.g. with different txversions 1 and 2). To let `MiniWallet` create a tx with a specific input, we have to call `.get_utxo()` before which also marks the UTXO as spent. The method is changed to also support keeping the UTXO in its internal list (`mark_as_spent=False`). With the behaviour on master, the second call to `.get_utxo()` with the same input would fail.
- To keep the diff in the first commit short, the `miniwallet` is set as a global variable, to avoid passing it on every tx creation/spending helper. The global is eliminated in the second (refactoring) commit, where all the helpers are moved to the test class as methods. By that, we can use `self.nodes[0]` directly in the helpers and don't have to pass it again and again. I think there could still be a lot of improvements/refactoring done in the test, but that should hopefully serve as a good basis.
ACKs for top commit:
laanwj:
Code review ACK bd7f27d16d
MarcoFalke:
review ACK bd7f27d16d🐕
Tree-SHA512: 24fb6a0f7702bae40d5271d197119827067d4b597e954d182e4c1aa5d0fa870368eb3ffed469b26713fa8ff8eb3ecc06abc80b2449cd68156d5559e7ae8a2b11
11d6459b6e rpc: include_unsafe option for fundrawtransaction (t-bast)
Pull request description:
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning nodes using anchor outputs) are very limited if they can only use safe inputs.
I also added this option to `send` and `walletcreatefundedpsbt` who internally delegate to `fundrawtransaction`.
Fixes#21299
ACKs for top commit:
laanwj:
Code review ACK 11d6459b6e
Tree-SHA512: 5e542a4febcfd6f41cf784678ff02ec9282eae2082c274983f72c5ea87b7ebbe1bd5fdc6a020d7a9d5996157754eb4966b8aeb6c1ceebf0b1519f735579b8bac
847288df07 test: fee rate values that cannot be represented as sat/vB (Jon Atack)
06a90fa038 rpc: for sat/vB fee rates, limit ParseFixedPoint decimals to 3 (Jon Atack)
0742c7840f rpc: enable passing decimals to AmountFromValue, add doxygen (Jon Atack)
8ce3ef57a3 test: ParseFixedPoint with 3 decimals for sat/vB fee rates (Jon Atack)
b503327597 test: type error and out of range fee rates where missing (Jon Atack)
c5fd4344f7 test: explicit fee rates with invalid amounts (Jon Atack)
ea6f76b66e test: improve zero-value explicit fee rate coverage (Jon Atack)
Pull request description:
- Improve/close gaps in existing test coverage before making the change
- Enable passing `decimals` to `ParseFixedPoint()` when calling `AmountFromValue()`
- Limit explicit fee rates in sat/vB passed in by users to 3 decimals, and raise otherwise
- Add regression test coverage
Closes#20534.
ACKs for top commit:
MarcoFalke:
review ACK 847288df07🔷
Tree-SHA512: c539d07ae9b21c0d6c8ea460beb9c8dad5559445518aace560abc3c05c588907bae189b6fd7602b3b397de4a42356136c3ec6f960d3dcf2d5d16377aef4ab5a2
This allows to get rid of the global miniwallet variable and to specify
the used node self.nodes[0] at only one place, instead of passing it to
every tx creation/send method again and again.
Can be reviewed with --ignore-all-space --color-moved=dimmed-zebra
09205b33aa net: Clarify message header validation errors (W. J. van der Laan)
955eee7680 net: Sanitize message type for logging (W. J. van der Laan)
Pull request description:
- Use `SanitizeString` when logging message errors to make sure that the message type is sanitized. I have checked all logging in `net.cpp`.
- For the `MESSAGESTART` error don't inspect and log header details at all: receiving invalid start bytes makes it likely that the packet isn't even formatted as valid P2P message. Logging the four unexpected start bytes (as hex) should be enough.
- Update `p2p_invalid_messages.py` test to check this.
- Improve error messages in a second commit.
Issue reported by gmaxwell.
ACKs for top commit:
MarcoFalke:
re-ACK 09205b33aa only change is log message fixup 🔂
practicalswift:
re-ACK 09205b33aa
Tree-SHA512: 8fe5326af135cfcf39ea953d9074a8c966b9b85a810b06a2c45b8a745cf115de4f321e72fc769709d6bbecfc5953aab83176db6735b04c0bc6796f59272cadce
2227fc4e62 test: minor fixes & improvements for files linter test (windsok)
Pull request description:
Couple of minor fixes & improvements for files linter test added in #21740
- Use a context manager when opening files, so that files are closed are we are done with them
- Use the `-z` flag when shelling out to `git ls-files` so that we can catch newlines and other weird control characters in filenames.
From the `git ls-files` manpage:
```
-z \0 line termination on output and do not quote filenames. See OUTPUT below for more information.
Without the -z option, pathnames with "unusual" characters are quoted as explained for the configuration variable
core.quotePath (see git-config(1)). Using -z the filename is output verbatim and the line is terminated by a NUL byte.
```
ACKs for top commit:
MarcoFalke:
cr ACK 2227fc4e62
practicalswift:
cr ACK 2227fc4e62: patch looks correct
Tree-SHA512: af059a805f4a7614162de85dea856052a45ab531895cb0431087e7fc9e037513fa7501bb5eb2fe43238adf5f09e77712ebdbb15b1486983359ad3661a3da0c60
Updates the lint-files.py lint test:
* Use a context manager when opening files, so that files are closed.
* Use the -z flag when shelling out to git ls-files so that we can catch newlines
and other weird control characters in filenames
- Use `SanitizeString` when logging message errors to make sure that the
message type is sanitized.
- For the `MESSAGESTART` error don't inspect and log header details at
all: receiving invalid start bytes makes it likely that the packet isn't
even formatted as valid P2P message. Logging the four unexpected start
bytes should be enough.
- Update `p2p_invalid_messages.py` test to check this.
Issue reported by gmaxwell.
9f767e8438 test: use MiniWallet for p2p_blocksonly.py (Sebastian Falbesoner)
Pull request description:
This PR enables one more of the non-wallet functional tests (p2p_blocksonly.py) to be run even with the Bitcoin Core wallet disabled by using the new MiniWallet instead, as proposed in #20078.
Note that MiniWallet creates segwit transactions by default, i.e. txid and wtxid are not identical and we have to return both from `check_p2p_tx_violation(...)`: wtxid is needed to match an expected `"received getdata for: wtx ..."` debug output, whereas the txid is needed to wait for a certain tx via `wait_for_tx(...)`.
ACKs for top commit:
jonatack:
ACK 9f767e8438 tested with `--disable-wallet`
Tree-SHA512: f08001f02c3c310ccdf713af0ba17304368a36414f412749908bbe8c03ad1e902190b8768b79f3b4909855762f285e7ab1b627cc4f45c90b42bb097a43cb4318
fa03d0acd6 fuzz: Create a block template in tx_pool targets (MarcoFalke)
fa61ce5cf5 fuzz: Limit mocktime to MTP in tx_pool targets (MarcoFalke)
fab646b8ea fuzz: Use correct variant of ConsumeRandomLengthString instead of hardcoding a maximum size (MarcoFalke)
fae2c8bc54 fuzz: Allow to pass min/max to ConsumeTime (MarcoFalke)
Pull request description:
Relatively simple check to ensure a block can always be created from the mempool
ACKs for top commit:
practicalswift:
Tested ACK fa03d0acd6
Tree-SHA512: e613376ccc88591cbe594db14ea21ebc9b2b191f6325b3aa4ee0cd379695352ad3b480e286134ef6ee30f043d486cf9792a1bc7e44445c41045ac8c3b931c7ff
91d93aac4e validation: remove nchaintx from assumeutxo metadata (James O'Beirne)
931684b24a validation: fix ActivateSnapshot to use hardcoded nChainTx (James O'Beirne)
Pull request description:
This fixes an oversight from the move of nChainTx from the user-supplied
snapshot metadata into the hardcoded assumeutxo chainparams.
Since the nChainTx is now unused in the metadata, it should be removed
in a future commit.
See: https://github.com/bitcoin/bitcoin/pull/19806#discussion_r612165410
ACKs for top commit:
Sjors:
utACK 91d93aac4e
ryanofsky:
Code review ACK 91d93aac4e. No change to previous commit, just new commit removing now unused utxo snapshot field and updating tests.
Tree-SHA512: 445bdd738faf007451f40bbcf360dd1fb4675e17a4c96546e6818c12e33dd336dadd95cf8d4b5f8df1d6ccfbc4bf5496864bb5528e416cea894857b6b732140c
46b025e00d test: add new python linter to check file names and permissions (windsok)
6f6bb3ebc7 test: fix file permissions on various scripts (windsok)
Pull request description:
Adds a new python linter test which tests for correct filenames and file permissions in the repository.
Replaces the existing tests in the `test/lint/lint-filenames.sh` and `test/lint/lint-shebang.sh` linter tests, as well as adding some new and increased testing. This increased coverage is intended to catch issues such as in #21728 and https://github.com/bitcoin/bitcoin/pull/16807/files#r345547050
Summary of tests:
* Checks every file in the repository against an allowed regexp to make sure only lowercase or uppercase alphanumerics (a-zA-Z0-9), underscores (_), hyphens (-), at (@) and dots (.) are used in repository filenames.
* Checks only source files (*.cpp, *.h, *.py, *.sh) against a stricter allowed regexp to make sure only lowercase alphanumerics (a-z0-9), underscores (_), hyphens (-) and dots (.) are used in source code filenames. Additionally there is an exception regexp for directories or files which are excepted from matching this regexp (This should replicate the existing `test/lint/lint-filenames.sh` test)
* Checks all files in the repository match an allowed executable or non-executable file permission octal. Additionally checks that for executable files, the file contains a shebang line.
* Checks that for executable `.py` and `.sh` files, the shebang line used matches an allowable list of shebangs (This should replicate the existing `test/lint/lint-shebang.sh` test)
* Checks every file that contains a shebang line to ensure it has an executable permission
Additionally updates the permissions on various files to comply with the new tests.
Fixes#21729
ACKs for top commit:
practicalswift:
cr re-ACK 46b025e00d: patch still looks correct
kiminuo:
code review ACK 46b025e00d if `contrib/gitian-descriptors/assign_DISTNAME` permission change is deemed OK.
laanwj:
Code review ACK 46b025e00d
Tree-SHA512: 1c8201a2cee0d9cbce15652b68cec9a6458a8b493fcd5392f98560aca0b1a12e668baab65a47100f116f626dadc3f591deb47f7368468c6a46c6c712c2533455
f09e6b2585 test: fix off-by-ones in rpc_fundrawtransaction (Jon Atack)
Pull request description:
The variables in these assertions should be the same within each line.
ACKs for top commit:
laanwj:
ACK f09e6b2585
theStack:
ACK f09e6b2585
Tree-SHA512: 7ac754eaadd8cb00a725afa55bccbb8de7547dedac9350d79a9a470918245617e075c56a91adc36fb653bbe8a0a325d59b00443155a7e1a81ebf22e4e4cf56d9
fa066f1b66 test: Run feature_cltv with MiniWallet (MarcoFalke)
fa5591d38c test: Hide tx rehash in helper (MarcoFalke)
fa5f938cfe test: Remove new_tx reference (MarcoFalke)
Pull request description:
Allows to run the test even with no wallet compiled in
ACKs for top commit:
theStack:
ACK fa066f1b66💽
Tree-SHA512: 3f659a178ba3ee0baffd70fddf8b8a68e5551d85626c7f254b234d7f75e6a16430a32a7952037db358b579f045b4d296b46156f72e5d226f3e80334dc635ca10
ebd4be43cc doc: add release notes for 20867 (Antoine Poinsot)
5aa50ab9cc rpc/util: multisig: only check redeemScript size is <= 520 for P2SH (Antoine Poinsot)
063df9e897 test/functional: standardness sanity checks for P2(W)SH multisig (Antoine Poinsot)
ae0429d3af script: allow up to 20 keys in wsh() descriptors (Antoine Poinsot)
9fc68faf35 script: match multisigs with up to MAX_PUBKEYS_PER_MULTISIG keys (Antoine Poinsot)
Pull request description:
As described in https://github.com/bitcoin/bitcoin/issues/20620 multisigs are currently limited to 16 keys in descriptors and RPC helpers, even for P2WSH and P2SH-P2WSH.
This adds support for multisig with up to 20 keys (which are already standard) for Segwit v0 context for descriptors (`wsh()`, `sh(wsh())`) and RPC helpers.
Fixes https://github.com/bitcoin/bitcoin/issues/20620
ACKs for top commit:
meshcollider:
re-utACK ebd4be43cc
instagibbs:
re-ACK ebd4be43cc
Tree-SHA512: 36141f10a8288010d17d5c4fe8d24878bcd4533b88a8aba3a44fa8f74ceb3182d70fee01427e0ab7f53ce7fab46c88c1cd3ac3b18ab8a10bd4a6b8b74ed79e46
c5bb142817 test: resolve bug in test/functional/interface_bitcoin_cli.py - Test -getinfo with -rpcwallet=unloaded wallet returns no balances (klementtan)
Pull request description:
I think there is a bug in this test case where the new value of `cli_get_info` is not asserted.
ACKs for top commit:
jonatack:
ACK c5bb142817
Tree-SHA512: 50c0c2c8fe63c95f951dee892fbacedf92208f47efe5ed481fbb255f15137c799d9200fa3ff31a442df0691248d7ff04d899842722c3032cd7f35553622ba38c
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning
nodes using anchor outputs) are very limited if they can only use safe inputs.
Fixes#21299
5f96d7d22d rpc: gettxoutsetinfo rejects hash_serialized_2 for specific height (Fabian Jahr)
23fe50436b test: Add test for coinstatsindex behavior in reorgs (Fabian Jahr)
90c966b0f3 rpc: Allow gettxoutsetinfo and getblockstats for stale blocks (Fabian Jahr)
b9362392ae index, rpc: Add use_index option for gettxoutsetinfo (Fabian Jahr)
bb7788b121 test: Test coinstatsindex robustness across restarts (Fabian Jahr)
e0938c2909 test: Add tests for block_info in gettxoutsetinfo (Fabian Jahr)
2501576ecc rpc, index: Add verbose amounts tracking to Coinstats index (Fabian Jahr)
655d929836 test: add coinstatsindex getindexinfo coverage, improve current tests (Jon Atack)
ca01bb8d68 rpc: Add Coinstats index to getindexinfo (Fabian Jahr)
57a026c30f test: Add unit test for Coinstats index (Fabian Jahr)
6a4c0c09ab test: Add functional test for Coinstats index (Fabian Jahr)
3f166ecc12 rpc: gettxoutsetinfo can be requested for specific blockheights (Fabian Jahr)
3c914d58ff index: Coinstats index can be activated with command line flag (Fabian Jahr)
dd58a4de21 index: Add Coinstats index (Fabian Jahr)
a8a46c4b3c refactor: Simplify ApplyStats and ApplyHash (Fabian Jahr)
9c8a265fd2 refactor: Pass hash_type to CoinsStats in stats object (Fabian Jahr)
2e2648a902 crypto: Make MuHash Remove method efficient (Fabian Jahr)
Pull request description:
This is part of the coinstats index project tracked in #18000
While the review of the new UTXO set hash algorithm (MuHash) takes longer recently #19328 was merged which added the possibility to run `gettxoutsetinfo` with a specific hash type. As the first type it added `hash_type=none` which skips the hashing of the UTXO set altogether. This alone did not make `gettxoutsetinfo` much faster but it allows the use of an index for the remaining coin statistics even before a new hashing algorithm has been added. Credit to Sjors for the idea to take this intermediate step.
Features summary:
- Users can start their node with the option `-coinstatsindex` which syncs the index in the background
- After the index is synced the user can use `gettxoutsetinfo` with `hash_type=none` or `hash_type=muhash` and will get the response instantly out of the index
- The user can specify a height or block hash when calling `gettxoutsetinfo` to see coin statistics at a specific block height
ACKs for top commit:
Sjors:
re-tACK 5f96d7d22d
jonatack:
Code review re-ACK 5f96d7d22d per `git range-diff 13d27b4 07201d3 5f96d7d`
promag:
Tested ACK 5f96d7d22d. Light code review ACK 5f96d7d22d.
Tree-SHA512: cbca78bee8e9605c19da4fbcd184625fb280200718396c694a56c7daab6f44ad23ca9fb5456d09f245d8b8d9659fdc2b3f3ce5e953c1c6cf4003dbc74c0463c2
Replaces the existing tests in the test/lint/lint-filenames.sh and test/lint/lint-shebang.sh linter tests, as well as adding some new and increased testing.
Summary of tests:
- Checks every file in the repository against an allowed regexp to make sure only lowercase or uppercase alphanumerics (a-zA-Z0-9), underscores (_), hyphens (-), at (@) and dots (.) are used in repository filenames.
- Checks only source files (*.cpp, *.h, *.py, *.sh) against a stricter allowed regexp to make sure only lowercase alphanumerics (a-z0-9), underscores (_), hyphens (-) and dots (.) are used in source code filenames. Additionally there is an exception regexp for directories or files which are excepted from matching this regexp (This should replicate the existing test/lint/lint-filenames.sh test)
- Checks all files in the repository match an allowed executable or non-executable file permission octal. Additionally checks that for executable files, the file contains a shebang line.
- Checks that for executable .py and .sh files, the shebang line used matches an allowable list of shebangs (This should replicate the existing test/lint/lint-shebang.sh test)
- Checks every file that contains a shebang line to ensure it has an executable permission
Fixes#21729
a33bdb52d1 [tests] Speed up p2p_segwit.py (John Newbery)
Pull request description:
Never sleep for more than 5 seconds when waiting for an
inv-getdata exchange to time out.
Shaves about 1 minute of the runtime of p2p_segwit.py.
ACKs for top commit:
MarcoFalke:
review ACK a33bdb52d1🐳
Tree-SHA512: 7bd892ed0b1b817579f88910ba4714519bd0d871241e1b9a67968d297de1ed63d558115abad2aae4d105ff176c35a7079a3a789f3053442aed30d6e1aefb5c4a
fa40eb5b6b test: Speed up mempool_spend_coinbase.py (MarcoFalke)
fa29382ab2 test: Fix test cache issue (MarcoFalke)
fa085b470a test: Create MiniWallet.create_self_transfer (MarcoFalke)
fa1bedb494 test: Add MiniWallet.sendrawtransaction (MarcoFalke)
Pull request description:
Locally the test will run 4 seconds faster with `--valgrind` (18s vs 14s)
ACKs for top commit:
mjdietzx:
crACK fa40eb5b6b
Tree-SHA512: ecfb60dda5ca5d7e6367bb9c6210390d95ebf6396ce657728901d118b75bb90c98f9351df3b01004d00682234448d6c6a13338d12097f7dced2cf7f1bd84d924
84934bf70e multiprocess: Add echoipc RPC method and test (Russell Yanofsky)
7d76cf667e multiprocess: Add comments and documentation (Russell Yanofsky)
ddf7ecc8df multiprocess: Add bitcoin-node process spawning support (Russell Yanofsky)
10afdf0280 multiprocess: Add Ipc interface implementation (Russell Yanofsky)
745c9cebd5 multiprocess: Add Ipc and Init interface definitions (Russell Yanofsky)
5d62d7f6cd Update libmultiprocess library (Russell Yanofsky)
Pull request description:
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
---
This PR adds basic process spawning and IPC method call support to `bitcoin-node` executables built with `--enable-multiprocess`[*].
These changes are used in https://github.com/bitcoin/bitcoin/pull/10102 to let node, gui, and wallet functionality run in different processes, and extended in https://github.com/bitcoin/bitcoin/pull/19460 and https://github.com/bitcoin/bitcoin/pull/19461 after that to allow gui and wallet processes to be started and stopped independently and connect to the node over a socket.
These changes can also be used to implement new functionality outside the `bitcoin-node` process like external indexes or pluggable transports (https://github.com/bitcoin/bitcoin/pull/18988). The `Ipc::spawnProcess` and `Ipc::serveProcess` methods added here are entry points for spawning a child process and serving a parent process, and being able to make bidirectional, multithreaded method calls between the processes. A simple example of this is implemented in commit "Add echoipc RPC method and test."
Changes in this PR aside from the echo test were originally part of #10102, but have been split and moved here for easier review, and so they can be used for other applications like external plugins.
Additional notes about this PR can be found at https://bitcoincore.reviews/19160
[*] Note: the `--enable-multiprocess` feature is still experimental, and not enabled by default, and not yet supported on windows. More information can be found in [doc/multiprocess.md](https://github.com/bitcoin/bitcoin/blob/master/doc/multiprocess.md)
ACKs for top commit:
fjahr:
re-ACK 84934bf70e
ariard:
ACK 84934bf. Changes since last ACK fixes the silent merge conflict about `EnsureAnyNodeContext()`. Rebuilt and checked again debug command `echoipc`.
Tree-SHA512: 52a948b5e18a26d7d7a09b83003eaae9b1ed2981978c36c959fe9a55abf70ae6a627c4ff913a3428be17400a3dace30c58b5057fa75c319662c3be98f19810c6
d831e711ca [validation] RewindBlockIndex no longer needed (Dhruv Mehta)
Pull request description:
Closes#17862
Context from [original comment](https://github.com/bitcoin/bitcoin/issues/17862#issuecomment-744285188) (minor edits):
`RewindBlockIndex()` is a mechanism to allow nodes to be upgraded after segwit activation, while still keeping their chainstate/datadir in a consistent state. It works as follows:
- A pre-segwit (i.e. v0.13.0 or older) node is running.
- Segwit activates. The pre-segwit node remains sync'ed to the tip, but is not enforcing the new segwit rules.
- The user upgrades the node to a segwit-aware version (v0.13.1 or newer).
- On startup, in `AppInitMain()`, `RewindBlockIndex()` is called. This walks the chain backwards from the tip, disconnecting and erasing blocks that from after segwit activation that weren't validated with segwit rules.
- those blocks are then redownloaded (with witness data) and validated with segwit rules.
This logic probably isn't required any more since:
- Segwit activated at height 481824, when the block chain was 130GB and the total number of txs was 250 million. Today, we're at height 667704, the blockchain is over 315GB and the total number of txs is over 600 million. Even if 20% of that added data is witness data (a high estimate), then around 150GB of transactions would need to be rewound to get back to segwit activation height. It'd probably be faster to simply validate from genesis, especially since we won't be validating any scripts before the assumevalid block. It's also unclear whether rewinding 150GB of transactions would even work. It's certainly never been tested.
- Bitcoin Core v0.13 is hardly used any more. https://luke.dashjr.org/programs/bitcoin/files/charts/software.html shows less than 50 nodes running it. The software was EOL on Aug 1st 2018. It's very unlikely that anyone is running 0.13 and will want to upgrade to 0.22.
This PR introduces `NeedsRedownload()` which merely checks for insufficiently validated segwit blocks and requests that the user restarts the node with `-reindex`. Reindexing the block files upon restart will make the node rebuild chain state and block index from the `blk*.dat` files on disk. The node won't be able to index the blocks with `BLOCK_OPT_WITNESS`, so they will be missing from the chain and be re-downloaded, with witness data.
Removing this code allows the following (done in follow-up #21090):
- removal of tests using `segwitheight=-1` in `p2p_segwit.py`.
- in turn, that allows us to drop support for `-segwitheight=-1`, which is only supported for that test.
- that allows us to always set `NODE_WITNESS` in our local services. The only reason we don't do that is to support `-segwitheight=-1`.
- that in turn allows us to drop all of the `GetLocalServices() & NODE_WITNESS` checks inside `net_processing.cpp`, since our local services would always include `NODE_WITNESS`
ACKs for top commit:
jnewbery:
utACK d831e711ca
jamesob:
ACK d831e711ca
laanwj:
Cursory code review ACK d831e711ca. Agree with the direction of the change, thanks for simplifying the logic here.
glozow:
utACK d831e711ca
Tree-SHA512: 3eddf5121ccd081ad7f15a5c6478ef867083edc8ba0bf1ee759e87bc070ee3d2f0698a3feba8db8dc087987c8452887b6f72cff05b3e178f41cb10a515fb8053
This value is no longer used and is instead specified statically
in chainparams. This change means that previously generated
snapshots will no longer be usable.
a732ee353c [test] Add tests for addr relay in -blocksonly mode (Amiti Uttarwar)
a6694eaed8 [test] Add address relay tests involving outbound peers (Martin Zumsande)
8188b77c17 [test] Add tests for getaddr behavior (Martin Zumsande)
d2dbfe6ff1 [test] Extract sending an addr message into a helper (Amiti Uttarwar)
c991943399 [test] Refactor the addr relay test to prepare for new tests (Amiti Uttarwar)
Pull request description:
This extends the functional test `p2p_addr_relay.py`.
It adds test coverage for address relay involving outbound peers, tests for both outgoing and incoming `GETADDR` requests and tests for `-blocksonly` mode.
The initial refactors and some of the new tests were taken from Amiti Uttarwar's PR #21528 - they are general test improvements not directly tied to the change proposed there.
ACKs for top commit:
amitiuttarwar:
re-ACK a732ee353c, small diff based on code review
MarcoFalke:
Concept ACK a732ee353c🌊
Tree-SHA512: e80d52683808ddd6b948a5134239f002f3fecf61b60e187877b07be6251721fde847104e495c75a1a5133a09c0b41a9255a0bec82932c0b304b516fa89bce33e
Add simple interfaces::Echo IPC interface with one method that just takes and
returns a string, to test multiprocess framework and provide an example of how
it can be used to spawn and call between processes.
b01cd9471f test: check that _all_ invalid-CLTV txs are rejected after BIP65 activation (Sebastian Falbesoner)
dbc1981474 test: check that _all_ invalid-CLTV txs are allowed in a block pre-BIP65 (Sebastian Falbesoner)
8d0ce50c48 test: prepare cltv_invalidate to test all failure reasons in feature_cltv.py (Sebastian Falbesoner)
ce994e1202 test: add tx modfication helper function in feature_cltv.py (Sebastian Falbesoner)
Pull request description:
The functional test for [BIP65](https://github.com/bitcoin/bips/blob/master/bip-0065.mediawiki) / `OP_CHECKLOCKTIMEVERIFY` (`feature_cltv.py`) currently only tests one out of five conditions that lead to failure of the op-code -- by prepending the script `OP_1NEGATE OP_CHECKLOCKTIMEVERIFY OP_DROP` to a tx's first input's scriptSig, the case of "_the top item on the stack is less than 0_" is checked:
f8462a6d27/test/functional/feature_cltv.py (L26-L35)
This PR adds the other cases (5 in total) by taking an integer argument to the function `cltv_invalidate` that is called in a loop instead of only once per testing scenario. Here is the full list of failure conditions and how they are tested (note that the scriptSig should still be valid before activation of BIP65, when `OP_CLTV` is simply a no-op):
* _the stack is empty_
➡️ prepending `OP_CHECKLOCKTIMEVERIFY` to scriptSig
* _the top item on the stack is less than 0_
➡️ prepending `OP_1NEGATE OP_CHECKLOCKTIMEVERIFY OP_DROP` to scriptSig
* _the lock-time type (height vs. timestamp) of the top stack item and the nLockTime field are not the same_
➡️ prepending `OPNum(1000) OP_CHECKLOCKTIMEVERIFY OP_DROP` to scriptSig
➡️ setting tx.vin[0].nSequence=0 and tx.nCheckTimeLock=1296688602 (genesis block timestamp)
* _the top stack item is greater than the transaction's nLockTime field_
➡️ prepending `OPNum(1000) OP_CHECKLOCKTIMEVERIFY OP_DROP` to scriptSig
➡️ setting tx.vin[0].nSequence=0 and tx.nCheckTimeLock=500
* _the nSequence field of the txin is 0xffffffff_
➡️ prepending `OPNum(500) OP_CHECKLOCKTIMEVERIFY OP_DROP` to scriptSig
➡️ setting tx.vin[0].nSequence=0xffffffff and tx.nCheckTimeLock=500
The first commit creates a helper function for the tx modification and also includes some tidying up like turning single-line to multi-line Python imports where necessary and cleaning up some PEP8 warnings. The second commit prepares the invalidation function `cltv_invalidate` and the third and the fourth use it and check for the expected reject reason strings ("Operation not valid with the current stack size", "Negative locktime" and "Locktime requirement not satisfied").
ACKs for top commit:
MarcoFalke:
review ACK b01cd9471f🐣
Tree-SHA512: dd82ae86e2bc4f3ab9bb1cfc9f04e4431b2b59c8aaf2a9f4b28654a1577e003fb43c500f99d76ff57e96262168e1cad7c1a0d71158e4b01063737e8f4be1e07d
9053b88b1c update docstring in feature_csv_activation.py (Pierre K)
Pull request description:
These changes in the test documentation reflect the changes introduced in #17921.
ACKs for top commit:
MarcoFalke:
review ACK 9053b88
Tree-SHA512: 17fb954baded8dab1c869dd48b76b516150bae616c792c573e4114d4adfdd40195745c56570aa3050cc0015ee496acd7ec178df8ba14831dd22f9722fda84da2
ffe33dfbd4 chainparams: drop versionbits threshold to 90% for mainnnet and signet (Anthony Towns)
f054f6bcd2 versionbits: simplify state transitions (Anthony Towns)
55ac5f568a versionbits: Add explicit NEVER_ACTIVE deployments (Anthony Towns)
dd07e6da48 fuzz: test versionbits delayed activation (Anthony Towns)
dd85d5411c tests: test versionbits delayed activation (Anthony Towns)
73d4a70639 versionbits: Add support for delayed activation (Anthony Towns)
9e6b65f6fa tests: clean up versionbits test (Anthony Towns)
5932744450 tests: test ComputeBlockVersion for all deployments (Anthony Towns)
63879f0a47 tests: pull ComputeBlockVersion test into its own function (Anthony Towns)
Pull request description:
BIP9-based implementation of "speedy trial" activation specification, see https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2021-March/018583.html
Edge cases are tested by fuzzing added in #21380.
ACKs for top commit:
instagibbs:
tACK ffe33dfbd4
jnewbery:
utACK ffe33dfbd4
MarcoFalke:
review ACK ffe33dfbd4💈
achow101:
re-ACK ffe33dfbd4
gmaxwell:
ACK ffe33dfbd4
benthecarman:
ACK ffe33dfbd4
Sjors:
ACK ffe33dfbd4
jonatack:
Initial approach ACK ffe33dfbd4 after a first pass of review, building and testing each commit, mostly looking at the changes and diffs. Will do a more high-level review iteration. A few minor comments follow to pick/choose/ignore.
ariard:
Code Review ACK ffe33df
Tree-SHA512: f79a7146b2450057ee92155cbbbcec12cd64334236d9239c6bd7d31b32eec145a9781c320f178da7b44ababdb8808b84d9d22a40e0851e229ba6d224e3be747c
41f891da50 tests: Skip SQLite fsyncs while testing (Andrew Chow)
Pull request description:
Since we want tests to run quickly, and since tests do a lot more db operations than expected we expect to see in actual usage, we disable sqlite's syncing behavior to make db operations run much faster. This syncing behavior is necessary for normal operation as it helps guarantee that data won't become lost or corrupted, but in tests, we don't care about that.
Fixes#21628
ACKs for top commit:
vasild:
ACK 41f891da50
Tree-SHA512: f36f969a182c622691ae5113573a3250e8d367437e83a1a9d3d2b55dd3a9cdf3c6474169a7bd271007bb9ce47f585aa7a6aeae6eebbaeb02d79409b02f47fd8b
fadcd3f78e doc: Remove irrelevant link to GitHub (MarcoFalke)
fa121b628d blockstorage: [refactor] Use chainman reference where possible (MarcoFalke)
fa0c7d9ad2 move-only: Move *Disk functions to blockstorage (MarcoFalke)
fa91b2b2b3 move-only: Move AbortNode to shutdown (MarcoFalke)
fa413f07a1 move-only: Move ThreadImport to blockstorage (MarcoFalke)
faf843c07f refactor: Move load block thread into ChainstateManager (MarcoFalke)
Pull request description:
This picks up the closed pull request #21030 and is the first step toward fixing #21220.
The basic idea is to move all disk access into a separate module with benefits:
* Breaking down the massive files init.cpp and validation.cpp into logical units
* Creating a standalone-module to reduce the mental complexity
* Pave the way to fix validation related circular dependencies
* Pave the way to mock disk access for testing, especially where it is performance critical (like fuzzing)
ACKs for top commit:
promag:
Code review ACK fadcd3f78e, checked (almost) moved only changes. This is a nice tidy up change and doesn't change behavior. Easily reviewed commit by commit.
jamesob:
ACK fadcd3f78e ([`jamesob/ackr/21575.1.MarcoFalke.refactor_create_blocksto`](https://github.com/jamesob/bitcoin/tree/ackr/21575.1.MarcoFalke.refactor_create_blocksto))
ryanofsky:
Code review ACK fadcd3f78e. New organization makes sense, moves extraneous things outside of validation.cpp. PR is also easy to review with helpfully split up moveonly commits.
Tree-SHA512: 917996592b6d8f9998289d8cb2b1b78b23d1fdb3b07216c9caec1380df33baa09dc2c1e706da669d440b497e79c9c62a01ca20dc202df5ad974a75f3ef7a143b
Since we want tests to run quickly, and since tests do a lot more db
operations than expected we expect to see in actual usage, we disable
sqlite's syncing behavior to make db operations run much faster. This
syncing behavior is necessary for normal operation as it helps guarantee
that data won't become lost or corrupted, but in tests, we don't care
about that.
This commit moves the ExternalSigner class and RPC methods out of the wallet module.
The enumeratesigners RPC can be used without a wallet since #21417.
With additional modifications external signers could be used without a wallet in general, e.g. via signrawtransaction.
The signerdisplayaddress RPC is ranamed to walletdisplayaddress because it requires wallet context.
A future displayaddress RPC call without wallet context could take a descriptor argument.
This commit fixes a rpc_help.py failure when configured with --disable-wallet.
5c446784b1 rpc: improve getnodeaddresses help (Jon Atack)
1b9189866a rpc: simplify/constify getnodeaddresses code (Jon Atack)
3bb6e7b655 rpc: add network field to rpc getnodeaddresses (Jon Atack)
Pull request description:
This patch adds a network field to RPC `getnodeaddresses`, which is useful on its own, particularly with the addition of new networks like I2P and others in the future, and which I also found helpful for adding a new CLI command as a follow-up to this pull that calls `getnodeaddresses` and needs to know the network of each address.
While here, also improve the `getnodeaddresses` code and help.
```
$ bitcoin-cli -signet getnodeaddresses 3
[
{
"time": 1611564659,
"services": 1033,
"address": "2600:1702:3c30:734f:8f2e:744b:2a51:dfa5",
"port": 38333,
"network": "ipv6"
},
{
"time": 1617531931,
"services": 1033,
"address": "153.126.143.201",
"port": 38333,
"network": "ipv4"
},
{
"time": 1617473058,
"services": 1033,
"address": "nsgyo7begau4yecc46ljfecaykyzszcseapxmtu6adrfagfrrzrlngyd.onion",
"port": 38333,
"network": "onion"
}
]
$ bitcoin-cli help getnodeaddresses
getnodeaddresses ( count )
Return known addresses, which can potentially be used to find new nodes in the network.
Arguments:
1. count (numeric, optional, default=1) The maximum number of addresses to return. Specify 0 to return all known addresses.
Result:
[ (json array)
{ (json object)
"time" : xxx, (numeric) The UNIX epoch time when the node was last seen
"services" : n, (numeric) The services offered by the node
"address" : "str", (string) The address of the node
"port" : n, (numeric) The port number of the node
"network" : "str" (string) The network (ipv4, ipv6, onion, i2p) the node connected through
},
...
]
```
Future idea: allow passing `getnodeaddresses` a network (or networks) as an argument to return only addresses in that network.
ACKs for top commit:
laanwj:
Tested ACK 5c446784b1
jarolrod:
re-ACK 5c446784b1
promag:
Code review ACK 5c446784b1.
Tree-SHA512: ab0101f50c76d98c3204133b9f2ab6b7b17193ada31455ef706ad11afbf48f472fa3deb33e96028682369b35710ccd07d81863d2fd55c1485f32432f2b75efa8
a97a9298ce Test that signrawtx works when a signed CSV and CLTV inputs are present (Andrew Chow)
6965456c10 Introduce DeferringSignatureChecker and inherit with SignatureExtractor (Andrew Chow)
Pull request description:
Previously SignatureExtractorChecker took a MutableTransactionSignatureChecker and passed through function calls to that. However not all functions were implemented so not everything passed through as it should have. To solve this, SignatureExctractorChecker now implements all of those functions via a new class - DeferredSignatureChecker. DeferredSignatureChecker is introduced to allow for future signature checkers which use another SignatureChecker but need to be able to do somethings outside of just the signature checking.
Fixes#21151
ACKs for top commit:
sipa:
utACK a97a9298ce
meshcollider:
Code review ACK a97a9298ce
instagibbs:
utACK a97a9298ce
Tree-SHA512: bca784c75c2fc3fcb74e81f4e3ff516699e8debaa2db81e12843abdfe9cf265dac11db8619751cb9b3e9bbe779805d029fabe5f3cbca5e86bfd72de3664b0b94
2e5f7def22 wallet, rpc: update listdescriptors response format (Ivan Metlushko)
Pull request description:
Update `listdescriptors` response format according to [RPC interface guidelines](https://github.com/bitcoin/bitcoin/blob/master/doc/developer-notes.md#rpc-interface-guidelines).
This is a follow up for #20226
**Before:**
```
Result:
[ (json array) Response is an array of descriptor objects
{ (json object)
"desc" : "str", (string) Descriptor string representation
"timestamp" : n, (numeric) The creation time of the descriptor
"active" : true|false, (boolean) Activeness flag
"internal" : true|false, (boolean, optional) Whether this is internal or external descriptor; defined only for active descriptors
"range" : [ (json array, optional) Defined only for ranged descriptors
n, (numeric) Range start inclusive
n (numeric) Range end inclusive
],
"next" : n (numeric, optional) The next index to generate addresses from; defined only for ranged descriptors
},
...
]
```
**After:**
```
Result:
{ (json object)
"wallet_name" : "str", (string) Name of wallet this operation was performed on
"descriptors" : [ (json array) Array of descriptor objects
{ (json object)
"desc" : "str", (string) Descriptor string representation
"timestamp" : n, (numeric) The creation time of the descriptor
"active" : true|false, (boolean) Activeness flag
"internal" : true|false, (boolean, optional) Whether this is internal or external descriptor; defined only for active descriptors
"range" : [ (json array, optional) Defined only for ranged descriptors
n, (numeric) Range start inclusive
n (numeric) Range end inclusive
],
"next" : n (numeric, optional) The next index to generate addresses from; defined only for ranged descriptors
},
...
]
}
```
ACKs for top commit:
achow101:
re-ACK 2e5f7def22
meshcollider:
utACK 2e5f7def22
jonatack:
re-ACK 2e5f7def22
Tree-SHA512: 49bf73e46e2a61003ce594a4bfc506eb9592ccb799c2909c43a1a527490a4b4009f78dc09f3d47b4e945d3d7bb3cd2632cf48c5ace5feed5066158cc010dddc1
ccd976dd3d test: use 327 fewer blocks in feature_nulldummy (Jon Atack)
68c280f197 test, refactor: abstract the feature_nulldummy blockheight values (Jon Atack)
Pull request description:
The resolved timeout issue seen in the CI can be reproduced locally by running `test/functional/feature_nulldummy.py --valgrind --loglevel=debug`
Speeds up the normal test runtime for me from 3.8 to 2.2 seconds (debug build). Thanks to Marco Falke for the approach suggestion.
ACKs for top commit:
AnthonyRonning:
reACK ccd976dd3d - ran a few times with the rest of the tests and still passing for me with just the fewer block change.
MarcoFalke:
review ACK ccd976dd3d 🏝
Tree-SHA512: 38339dca4276d1972e3a5a5ee436da64e9e58fd3b50b186e34b07ade9523ac4c03f6c3869c5f2a59c23b43c44f87e712f8297a01a8d83202049c081e3eeb4445
90ae3d8ca6 doc: Add release notes for -deprecatedrpc=addresses and bitcoin-tx (Michael Dietz)
085b3a7299 rpc: deprecate `addresses` and `reqSigs` from rpc outputs (Michael Dietz)
Pull request description:
Considering the limited applicability of `reqSigs` and the confusing output of `1` in all cases except bare multisig, the `addresses` and `reqSigs` outputs are removed for all rpc commands.
1) add a new sane "address" field (for outputs that have an identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact (with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely always.
Note: Some light refactoring done to allow us to very easily delete a few chunks of code (marked with TODOs) when we remove this deprecated behavior.
Using `IsDeprecatedRPCEnabled` in core_write.cpp caused some circular dependencies involving core_io
Circular dependencies were caused by rpc/util unnecessarily importing node/coinstats and node/transaction. Really what rpc/util needs are some fundamental type/helper-function definitions. So this was cleaned up to make more sense.
This fixes#20102.
ACKs for top commit:
MarcoFalke:
re-ACK 90ae3d8ca6📢
Tree-SHA512: 8ffb617053b5f4a8b055da17c06711fd19632e0037d71c4c8135e50c8cd7a19163989484e4e0f17a6cc48bd597f04ecbfd609aef54b7d1d1e76a784214fcf72a
beead33a21 [test] no send feefilters when txrelay is turned off (glozow)
18a9b27dd6 p2p: Don't send FEEFILTER in blocksonly mode (Martin Zumsande)
Pull request description:
The purpose of FEEFILTER messages (BIP 133) is to inform our peers that we do not want transactions below a specified fee rate.
In blocksonly mode, we do not want our peer to send us any transactions at all (and will disconnect if a peer still sends a transaction INV or TX).
Therefore, I don't think that it makes sense to send FEEFILTER messages every 10 minutes on average in blocksonly mode - this PR disables it.
Note that on block-relay-only connections, FEEFILTER is already disabled, just not in blocksonly mode.
ACKs for top commit:
glozow:
re ACK beead33a21🙂 thanks for adding the test!
amitiuttarwar:
reACK beead33a21
MarcoFalke:
review ACK beead33a21
jnewbery:
reACK beead33a21
Tree-SHA512: e748cd52fe23d647fa49008b020389956ac508e16ce9fd108d8afb773bff95788298ae229162bd70215d7246fc25c796484966dc05890b0b4ef601f9cd35628b
4f2653a890 test: Use deterministic chain in utxo set hash test (Fabian Jahr)
4973c5175c test: Remove wallet dependency of utxo set hash test (Fabian Jahr)
1a27af1d7b rpc: Improve gettxoutsetinfo help (Fabian Jahr)
Pull request description:
Follow-ups to #19145:
- Small improvement on the help text of RPC gettxoutsetinfo
- Using deterministic blockchain in the test `functional/feature_utxo_set_hash.py`
- Removing wallet dependency in the test `functional/feature_utxo_set_hash.py`
Split out of #19521.
ACKs for top commit:
MarcoFalke:
review ACK 4f2653a890👲
Tree-SHA512: 92927b3aa22b6324eb4fc9d346755313dec44d973aa69a0ebf80a8569b5f3a7cf3539721ebdba183737534b9e29b3e33f412515890f0d0b819878032a3bba8f9
39a9ec579f Unconditionally check for fRelay field in test framework (Troy Giorshev)
Pull request description:
picking up #20411 (rebased onto master)
There is a discrepancy in the implementation of our p2p protocol between
bitcoind and the testing framework. The fRelay field is an optional
field at the end of a version message as of protocol version 70001.
However, when deserializing a message in bitcoind, we don't check the
version to see if it should have an fRelay field or not. Instead, we
unconditionally attempt to deserialize into the field.
This commit brings the testing framework in line with the implementation
in core.
This matters for a version message with the following fields:
Version = 60000
fRelay = 1
Bitcoind would deserialize this into a version message with
Version=60000 and fRelay=1, whereas (before this commit) our testing
framework would deserialize this into a version message with
Version=60000 and fRelay=0.
ACKs for top commit:
jnewbery:
utACK 39a9ec579f
Tree-SHA512: 13a23f1180b7121ba41cb85baa38094b41f4607a7c88b3384775177cb116e76faf5514760624f98a4e8a830767407c46753a7e0285158c33e0c6ce395de8f15c
581791c620 test: add functional test for anchors.dat (bruno)
Pull request description:
This PR adds a functional test for anchors.dat.
It creates a node and adds 2 outbound block-relay-only connections and 5 inbound connections.
When the node is down, anchors.dat should contain the 2 addresses from the outbound block-relay-only connections.
ACKs for top commit:
MarcoFalke:
Concept ACK 581791c620
hebasto:
ACK 581791c620
Tree-SHA512: 77038b09e36ee5ae473a26d6f566c0ed283af258c34df8486706a24f72b05abab621a293ac886d03849bc45bc28be7336137252225b25aff393baa6b5238688c
There is a discrepancy in the implementation of our p2p protocol between
bitcoind and the testing framework. The fRelay field is an optional
field at the end of a version message as of protocol version 70001.
However, when deserializing a message in bitcoind, we don't check the
version to see if it should have an fRelay field or not. Instead we
unconditionally attempt to deserialize into the field.
This commit brings the testing framework in line with the implementation
in core.
This matters for a version message with the following fields:
Version = 60000
fRelay = 1
Bitcoind would deserialize this into a version message with
Version=60000 and fRelay=1, whereas (before this commit) our testing
framework would deserialize this into a version message with
Version=60000 and fRelay=0.
1) add a new sane "address" field (for outputs that have an
identifiable address, which doesn't include bare multisig)
2) with -deprecatedrpc: leave "reqSigs" and "addresses" intact
(with all weird/wrong behavior they have now)
3) without -deprecatedrpc: drop "reqSigs" and "addresses" entirely,
always.
8dd5946c0b add functional test (Larry Ruane)
b5a80fa7e4 util: Handle HTTP_SERVICE_UNAVAILABLE in bitcoin-cli (Hennadii Stepanov)
Pull request description:
If `bitcoind` is processing 16 RPC requests, attempting to submit another request using `bitcoin-cli` produces this less-than-helpful error message: `error: couldn't parse reply from server`. This PR changes the error to: `error: server response: Work queue depth exceeded`.
ACKs for top commit:
fjahr:
tACK 8dd5946c0b
luke-jr:
utACK 8dd5946c0b (no changes since previous utACK)
hebasto:
re-ACK 8dd5946c0b, only suggested changes since my [previous](https://github.com/bitcoin/bitcoin/pull/18335#pullrequestreview-460621350) review.
darosior:
ACK 8dd5946c0b
Tree-SHA512: 33e25f6ff05d9b56fae2bdb68b132557bb8e995f5438ac4fbbc53c304c5152a98aa43c43600c31d8a6a2830cbd48bf8ec7d89dce50190b29ec00a43830126913
d09120b7d1 test: give fundraw more time for test_transaction_too_large (Jon Atack)
Pull request description:
to hopefully fix timeouts from a new test added in 48a0319bab of #20536 merged March 8, 2021
seen locally when running via the test runner
```
File "/home/jon/projects/bitcoin/bitcoin/test/functional/rpc_fundrawtransaction.py", line 927, in test_transaction_too_large
raise JSONRPCException({
test_framework.authproxy.JSONRPCException: 'generatetoaddress' RPC took longer than 30.000000 seconds. Consider using larger timeout for calls that take longer to return. (-344)
```
and in the CI like https://bitcoinbuilds.org/index.php?ansilog=28537952-2c92-46f2-9871-8918e5ba2738.log#l2398
```
File "/home/ubuntu/src/test/functional/rpc_fundrawtransaction.py", line 927, in test_transaction_too_large
test_framework.authproxy.JSONRPCException: 'generatetoaddress' RPC took longer than 240.000000 seconds. Consider using larger timeout for calls that take longer to return. (-344)
```
Top commit has no ACKs.
Tree-SHA512: f11c923439014fe12420f986c640fd301a26282eb41516957d73b9c751087cbae3d0e316f9ccb49bcb424f488540266f70d3f97948633e77c62bd7935df90452
c62f9bc0e9 test: use fewer blocks in wallet_groups and move sync call (Jon Atack)
3a16b5ef95 test: add missing logging to wallet_groups.py (Jon Atack)
Pull request description:
- add logging (particularly useful as the tests are somewhat slow)
- generate 101 blocks instead of 110
- move `sync_all` call into the loop, so fewer blocks are synced on each call, to hopefully see fewer CI timeouts as in https://bitcoinbuilds.org/index.php?ansilog=88eee99e-1727-44ed-b778-3b9c75c33928.log
```
L2742 File "/home/ubuntu/src/test/functional/wallet_groups.py", line 162, in run_test
L2743 self.sync_all()
test_framework.authproxy.JSONRPCException: 'syncwithvalidationinterfacequeue' RPC took longer than 960.000000 seconds. Consider using larger timeout for calls that take longer to return. (-344)
```
ACKs for top commit:
MarcoFalke:
cr ACK c62f9bc0e9
Tree-SHA512: 711deafcd589cb8196cb207ff882e0f2ab6b70828a6abad91f83f535974cc430a56b9e8a960fd233d31d610932a0d48b49ee681aae564d145a3040288ecda8f8
fad0ae6bb8 doc: Rename fuzz seed_dir to corpus_dir (MarcoFalke)
Pull request description:
The fuzz corpus directory might contain hand-crafted seeds, but generally it is a set of test inputs. See also https://github.com/google/fuzzing/blob/master/docs/glossary.md#corpus
ACKs for top commit:
practicalswift:
cr ACK fad0ae6bb8: patch looks correct and "why not?" :)
fanquake:
ACK fad0ae6bb8 - did not test
Tree-SHA512: 38c952feb07aeeeb038b3261a12c824fab9ce5153d75f0ecf6d3f43db4f50998eeb2b14b11b7155f529189c93783fa2c11c81059021a04398c43f3505b31a2d4
48a0319bab Add a test that selects too large if BnB is used (Andrew Chow)
3e69939b78 Fail if maximum weight is too large (Andrew Chow)
51e2cd322c Have CalculateMaximumSignedTxSize also compute tx weight (Andrew Chow)
Pull request description:
Currently the `Transaction too large` is calculated on the transaction that is returned from `CreateTransaction`. This does not make sense for when `CreateTransaction` is being used for `fundrawtransaction` as no signing occurs so the final returned transaction is missing signatures. Thus users may successfully fund a transaction but fail to broadcast it after it has been fully signed.
So instead we should figure out whether the transaction we are funding will be too large after it is signed. We can do this by having `CalculateMaximumSignedTxSize` also return the transaction weight and then comparing that weight against the maximum weight.
ACKs for top commit:
instagibbs:
ACK 48a0319bab
meshcollider:
utACK 48a0319bab
Xekyo:
utACK with nits 48a0319bab
Tree-SHA512: 1700c60b07f67e2d5c591c5ccd131ac9f1861fab3def961c3c9c4b3281ec1063fe8e4f0f7f1038cac72692340856406bcee8fb45c8104d2ad34357a0ec878ac7
a061a29970 test: bring p2p_leak.py up to date. (Martin Zumsande)
Pull request description:
After the introduction of wtxidrelay and sendaddrv2 messages during version handshake, extend p2p_leak.py test to reflect this.
Also, some minor fixes and doc improvements.
I also added a test that peers not completing the version handshake will be disconnected for timeout, as suggested by MarcoFalke in https://github.com/bitcoin/bitcoin/pull/19723#issuecomment-699540294.
ACKs for top commit:
brunoerg:
Tested ACK a061a29970
theStack:
Tested ACK a061a29970
Tree-SHA512: 26c601491fa8710fc972d1b8f15da6b387a95b42bbfb629ec4c668769ad3824b6dd6a33d97363bca2171e403d8d1ce08abf3e5c9cab34f98d53e0109b1c7a0e5
6a0a6e7d05 Correction for VerifyTaprootCommitment comments (Russell O'Connor)
Pull request description:
According to BIP-341, 'p' is called the taproot *internal* key, not inner key.
ACKs for top commit:
sipa:
ACK 6a0a6e7d05
benthecarman:
ACK 6a0a6e7d05
theStack:
ACK 6a0a6e7d05
Tree-SHA512: 94f553476a8404bff4b2d5724a1a54c5f530b987a616cd00a3800095f245c06e3c7a9066c729976f32069a56029406859a70ba523151d333dc1ed874f242bce8
233a886b42 test: check that getblockfilter RPC fails without block filter index (Sebastian Falbesoner)
Pull request description:
If a node was started without compact block filter index (parameter `--blockfilterindex=0`), the `getblockfilter` RPC call should fail.
ACKs for top commit:
MarcoFalke:
review ACK 233a886b42
Tree-SHA512: c8824373fad7d1de2dcb43c1d9541d736b478235be243080d2b7479c2588eac0e5722337ec1307394b331e0002fbcabb368e4955c2dc98dd5fce76d8c089e8a1
After the introduction of wtxidrelay and sendaddrv2 messages during
version handshake, extend p2p_leak.py test to reflect this.
Also, some minor fixes and doc improvements.
a701fcf01f net: Do not skip the I2P network from GetNetworkNames() (Vasil Dimov)
0181e24439 net: recognize I2P from ParseNetwork() so that -onlynet=i2p works (Vasil Dimov)
b905363fa8 net: accept incoming I2P connections from CConnman (Vasil Dimov)
0635233a1e net: make outgoing I2P connections from CConnman (Vasil Dimov)
9559bd1404 net: add I2P to the reachability map (Vasil Dimov)
76c35c60f3 init: introduce I2P connectivity options (Vasil Dimov)
c22daa2ecf net: implement the necessary parts of the I2P SAM protocol (Vasil Dimov)
5bac7e45e1 net: extend Sock with a method to check whether connected (Vasil Dimov)
42c779f503 net: extend Sock with methods for robust send & read until terminator (Vasil Dimov)
ea1845315a net: extend Sock::Wait() to report a timeout (Vasil Dimov)
78fdfbea66 net: dedup MSG_NOSIGNAL and MSG_DONTWAIT definitions (Vasil Dimov)
34bcfab562 net: move the constant maxWait out of InterruptibleRecv() (Vasil Dimov)
cff65c4a27 net: extend CNetAddr::SetSpecial() to support I2P (Vasil Dimov)
f6c267db3b net: avoid unnecessary GetBindAddress() call (Vasil Dimov)
7c224fdac4 net: isolate the protocol-agnostic part of CConnman::AcceptConnection() (Vasil Dimov)
1f75a653dd net: get the bind address earlier in CConnman::AcceptConnection() (Vasil Dimov)
25605895af net: check for invalid socket earlier in CConnman::AcceptConnection() (Vasil Dimov)
545bc5f81d util: fix WriteBinaryFile() claiming success even if error occurred (Vasil Dimov)
8b6e4b3b23 util: fix ReadBinaryFile() returning partial contents (Vasil Dimov)
4cba2fdafa util: extract {Read,Write}BinaryFile() to its own files (Vasil Dimov)
Pull request description:
Add I2P support by using the [I2P SAM](https://geti2p.net/en/docs/api/samv3) protocol. Unlike Tor, for incoming connections we get the I2P address of the peer (and they also receive ours when we are the connection initiator).
Two new options are added:
```
-i2psam=<ip:port>
I2P SAM proxy to reach I2P peers and accept I2P connections (default:
none)
-i2pacceptincoming
If set and -i2psam is also set then incoming I2P connections are
accepted via the SAM proxy. If this is not set but -i2psam is set
then only outgoing connections will be made to the I2P network.
Ignored if -i2psam is not set. Notice that listening for incoming
I2P connections is done through the SAM proxy, not by binding to
a local address and port (default: true)
```
# Overview of the changes
## Make `ReadBinary()` and `WriteBinary()` reusable
We would need to dump the I2P private key to a file and read it back later. Move those two functions out of `torcontrol.cpp`.
```
util: extract {Read,Write}BinaryFile() to its own files
util: fix ReadBinaryFile() returning partial contents
util: fix WriteBinaryFile() claiming success even if error occurred
```
## Split `CConnman::AcceptConnection()`
Most of `CConnman::AcceptConnection()` is agnostic of how the socket was accepted. The other part of it deals with the details of the `accept(2)` system call. Split those so that the protocol-agnostic part can be reused if we accept a socket by other means.
```
net: check for invalid socket earlier in CConnman::AcceptConnection()
net: get the bind address earlier in CConnman::AcceptConnection()
net: isolate the protocol-agnostic part of CConnman::AcceptConnection()
net: avoid unnecessary GetBindAddress() call
```
## Implement the I2P [SAM](https://geti2p.net/en/docs/api/samv3) protocol (not all of it)
Just the parts that would enable us to make outgoing and accept incoming I2P connections.
```
net: extend CNetAddr::SetSpecial() to support I2P
net: move the constant maxWait out of InterruptibleRecv()
net: dedup MSG_NOSIGNAL and MSG_DONTWAIT definitions
net: extend Sock::Wait() to report a timeout
net: extend Sock with methods for robust send & read until terminator
net: extend Sock with a method to check whether connected
net: implement the necessary parts of the I2P SAM protocol
```
## Use I2P SAM to connect to and accept connections from I2P peers
Profit from all of the preceding commits.
```
init: introduce I2P connectivity options
net: add I2P to the reachability map
net: make outgoing I2P connections from CConnman
net: accept incoming I2P connections from CConnman
net: recognize I2P from ParseNetwork() so that -onlynet=i2p works
net: Do not skip the I2P network from GetNetworkNames()
```
ACKs for top commit:
laanwj:
re-ACK a701fcf01f
jonatack:
re-ACK a701fcf01f reviewed diff per `git range-diff ad89812 2a7bb34 a701fcf`, debug built and launched bitcoind with i2pd v2.35 running a dual I2P+Torv3 service with the I2P config settings listed below (did not test `onlynet=i2p`); operation appears nominal (same as it has been these past weeks), and tested the bitcoind help outputs grepping for `-i i2p` and the rpc getpeerinfo and getnetworkinfo helps
Tree-SHA512: de42090c9c0bf23b43b5839f5b4fc4b3a2657bde1e45c796b5f3c7bf83cb8ec6ca4278f8a89e45108ece92f9b573cafea3b42a06bc09076b40a196c909b6610e
8a8c6383f6 zmq test: fix sync-up by matching notification to generated block (Sebastian Falbesoner)
Pull request description:
This is a follow-up PR for #21008, fixes#21216.
In the course of investigating the problem with jnewbery (analyzing the Cirrus log https://cirrus-ci.com/task/4660108304056320), it turned out that the "sync up" procedure of repeatedly generating a block and waiting for a notification with timeout is too brittle in its current form, as the following scenario could happen:
- generate block A
- receive notification, timeout happens => repeat procedure
- generate block B
- node publishes block A notification
- receive notification, we receive the one caused by block A (!!!) => sync-up procedure is completed
- node publishes block B notification
- the actual test starts
- on the first notification reception, the one caused by block B is received, rather than the one actually caused by test code => assertion failure
This change in the PR ensures that after each test block generation, we wait for the notification that is actually caused by that block and ignore others from possibly earlier blocks. The matching is kind of ugly, it assumes that one out of four components in the block is contained in the notification: the block hash, the tx id, the raw block data or the raw transaction data. (Unfortunately we have to support all publisher topics.)
I'm aware that this is quite a lot of code now only for establishing a robust test setup. OTOH I wouldn't know of a better method right now, suggestions are very welcome.
Note for potential reviewers: for both reproducing the issue on master branch and verifying on PR branch, one can simply generate two blocks in the sync-up procedure rather than one.
ACKs for top commit:
MarcoFalke:
Concept ACK 8a8c6383f6
Tree-SHA512: a2eb78ba06dfd0fda7b1c111b6bbfb5dab4ab08500cc19c7ea02c3239495d5c74cc7d45250a8b3ecc78ca42d97ee6719bf73db8a137839e5e09a3cfcf08ed29e
So that help texts include "i2p" in:
* `./bitcoind -help` (in `-onlynet` description)
* `getpeerinfo` RPC
* `getnetworkinfo` RPC
Co-authored-by: Jon Atack <jon@atack.com>
Introduce two new options to reach the I2P network:
* `-i2psam=<ip:port>` point to the I2P SAM proxy. If this is set then
the I2P network is considered reachable and we can make outgoing
connections to I2P peers via that proxy. We listen for and accept
incoming connections from I2P peers if the below is set in addition to
`-i2psam=<ip:port>`
* `-i2pacceptincoming` if this is set together with `-i2psam=<ip:port>`
then we accept incoming I2P connections via the I2P SAM proxy.
It turned out that the "sync up" procedure of repeatedly generating a
block and waiting for a notification once with timeout is too naive in
its current form, as the following scenario could happen:
- generate block A
- receive notification, timeout happens -> repeat procedure
- generate block B
- node publishes block A notification
- receive notification, we receive the one caused by block A
-> sync-up procedure is completed
- node publishes block B
- the actual test starts
- on the first notification reception, one caused by block B is received,
rather than the one actually caused by test code, leading to failure
This change ensures that after each test block generation, we wait for
the notification that is actually caused by that block and ignore others
from possibly earlier blocks.
Co-authored-by: Jon Atack <jon@atack.com>
88c4b9b761 test: remove unneeded node from feature_blockfilterindex_prune.py (Jon Atack)
ace3f4cbdf test: improve assertions in feature_blockfilterindex_prune.py (Jon Atack)
Pull request description:
- improves the assertions
- removes an unneeded node, reducing from two to one, and some unneeded `extra_arg` code
ACKs for top commit:
MarcoFalke:
ACK 88c4b9b761
brunoerg:
Tested ACK 88c4b9b761
Tree-SHA512: 295700da3a5f583ee02ae2d184db93cce0e13aba69115d5db07f83e96a66b4b850adaff2c3725b6585799565b9ee654b1fee8a6245eaba8c21e1cb5ce524eb2b
Collects all the orphan handling globals into a single member var in
net_processing, and ensures access is encapuslated into the interface
functions. Also adds doxygen comments for methods.
fa730e9157 test: Avoid connecting to real network when running tests (MarcoFalke)
fa1b713941 test: Assume node is running in subtests (MarcoFalke)
Pull request description:
Introduced in #19884
ACKs for top commit:
Sjors:
ACK fa730e9157
Tree-SHA512: fe132a9ffe2fae1ab16857a3dec9839526fdf74d27a1ae794fbffca8356f639c4b916dc888b260281e9cc793916706c18d1687ebb5a076d4e1c481d218d308d3
fa560cc6c4 test: Intermittent issue in feature_blockfilterindex_prune (MarcoFalke)
Pull request description:
https://cirrus-ci.com/task/4962244553342976?command=ci#L5131
The index is built in a background thread, so we have to wait for it.
ACKs for top commit:
jonatack:
ACK fa560cc6c4
Tree-SHA512: e7a246fe43a28511581fe34b1f5a85303b1874b2535330afc0405269cce7306984ecc6af389791321e3aa4b224819e89d9b89dd5bc080d60baa20bd007412787
faa137eb9e test: Speed up rpc_blockchain.py by removing miniwallet.generate() (MarcoFalke)
fa1fe80c75 test: Change address type from P2PKH to P2WSH in rpc_blockchain (MarcoFalke)
fa4d8f3169 test: Cache 25 mature coins for ADDRESS_BCRT1_P2WSH_OP_TRUE (MarcoFalke)
fad25153f5 test: Remove unused bug workaround (MarcoFalke)
faabce7d07 test: Start only the number of nodes that are needed (MarcoFalke)
Pull request description:
Speed up various tests:
* Remove unused nodes, which only consume time on start/stop
* Remove unused "bug workarounds"
* Remove the need for `miniwallet.generate()` by adding `miniwallet.scan_blocks()`. (On my system, with valgrind, generating 105 blocks takes 3.31 seconds. Rescanning 5 blocks takes 0.11 seconds.)
ACKs for top commit:
laanwj:
Code review ACK faa137eb9e
Tree-SHA512: ead1988d5aaa748ef9f8520af1e0bf812cf1d72e281ad22fbd172b7306d850053040526f8adbcec0b9a971c697a0ee7ee8962684644d65b791663eedd505a025
ba7e17e073 rpc, test: document {previous,next}blockhash as optional (Sebastian Falbesoner)
Pull request description:
This PR updates the result help of the following RPCs w.r.t. the `previousblockhash` and `nextblockhash` fields:
- getblockheader
- getblock
Also adds trivial tests on genesis block (should not contain "previousblockhash") and best block (should not contain "nextblockhash").
Top commit has no ACKs.
Tree-SHA512: ef42c5c773fc436e1b4a67be14e2532e800e1e30e45e54a57431c6abb714d2c069c70d40ea4012d549293b823a1973b3f569484b3273679683b28ed40abf46bb
This option replaces --with-boost-process
This prepares external signer support to be disabled by default.
It adds a configure option to enable this feature and to check
if Boost::Process is present.
This also exposes ENABLE_EXTERNAL_SIGNER to the test suite via test/config.ini
Every (sub)test in the framework assumes the node is running, except for
the (sub)tests in this file. Remove that confusion by stopping the node
at the start of every subtest, instead of at the end.
fa24247d0f test: Fix NODE_NETWORK_LIMITED_MIN_BLOCKS disconnection (MarcoFalke)
fab6995629 test: Make test actually test something (MarcoFalke)
fae8f35df8 test: pep8 touched test (MarcoFalke)
Pull request description:
Fix several bugs. Also, fix#21227
ACKs for top commit:
jonasschnelli:
utACK fa24247d0f - thanks for fixing.
ryanofsky:
Code review ACK fa24247d0f with caveat above that I don't really understand the problem or fix. But the cleanups look good and the fix does seem perfectly safe. More description would be welcome!
Tree-SHA512: 67f6ec92f6493aa822ae3fa8a7426a5acdc684044b8bafc0c65b652f63ccce969d0a6f1d1f099d6a91d05f478724869345b70335f2cfcfd00df46aef05cc4f9e
6bfbc97d71 test: disallow sendtoaddress/sendmany when private keys disabled (Jon Atack)
0997019e76 Disallow sendtoaddress and sendmany when private keys disabled (Andrew Chow)
Pull request description:
Since `sendtoaddress` and `sendmany` (which use the `SendMoney` function) create and commit a transaction, they should not do anything when the wallet does not have private keys. Otherwise a valid transaction cannot be made.
Fixes#21104
ACKs for top commit:
jonatack:
ACK 6bfbc97d71
meshcollider:
utACK 6bfbc97d71
kristapsk:
ACK 6bfbc97d71. "Error: Private keys are disabled for this wallet" is definitely a better error message than "Insufficient funds" here. Hopefully change of error code from -6 to -4 doesn't break any software using Bitcoin JSON-RPC API.
Tree-SHA512: f277d6b5252e43942d568614032596f2c0827f00cd0cb71e44ffcb9822bfb15a71730a3e3688f31e59ba4eb7d275250c4e65ad4b6b3e96be6314c56a672432fb
b4511e2e2e log: Prefix log messages with function name if -logsourcelocations is set (practicalswift)
Pull request description:
Prefix log messages with function name if `-logfunctionnames` is set.
Yes, exactly like `-logthreadnames` but for function names instead of thread names :)
This is a small developer ergonomics improvement: I've found this to be a cheap/simple way to correlate log output and originating function.
For me it beats the ordinary cycle of 1.) try to figure out a regexp matching the static part of the dynamic log message, 2.) `git grep -E 'Using .* MiB out of .* requested for signature cache'`, 3.) `mcedit filename.cpp` (`openemacs filename.cpp` works too!) and 4.) search for log message and scroll up to find the function name :)
Without any logging parameters:
```
$ src/bitcoind -regtest
2020-08-25T03:29:04Z Using RdRand as an additional entropy source
2020-08-25T03:29:04Z Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements
2020-08-25T03:29:04Z Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements
2020-08-25T03:29:04Z Loaded best chain: hashBestChain=0fff88f13cb7b2c71f2a335e3a4fc328bf5beb436012afca590b1a11466e22ff height=0 date=2011-02-02T23:16:42Z progress=1.000000
2020-08-25T03:29:04Z block tree size = 1
2020-08-25T03:29:04Z nBestHeight = 0
2020-08-25T03:29:04Z Imported mempool transactions from disk: 0 succeeded, 0 failed, 0 expired, 0 already there, 0 waiting for initial broadcast
2020-08-25T03:29:04Z 0 addresses found from DNS seeds
```
With `-logthreadnames` and `-logfunctionnames`:
```
$ src/bitcoind -regtest -logthreadnames -logfunctionnames
2020-08-25T03:29:04Z [init] [ReportHardwareRand] Using RdRand as an additional entropy source
2020-08-25T03:29:04Z [init] [InitSignatureCache] Using 16 MiB out of 32/2 requested for signature cache, able to store 524288 elements
2020-08-25T03:29:04Z [init] [InitScriptExecutionCache] Using 16 MiB out of 32/2 requested for script execution cache, able to store 524288 elements
2020-08-25T03:29:04Z [init] [LoadChainTip] Loaded best chain: hashBestChain=0fff88f13cb7b2c71f2a335e3a4fc328bf5beb436012afca590b1a11466e22ff height=0 date=2011-02-02T23:16:42Z progress=1.000000
2020-08-25T03:29:04Z [init] [AppInitMain] block tree size = 1
2020-08-25T03:29:04Z [init] [AppInitMain] nBestHeight = 0
2020-08-25T03:29:04Z [loadblk] [LoadMempool] Imported mempool transactions from disk: 0 succeeded, 0 failed, 0 expired, 0 already there, 0 waiting for initial broadcast
2020-08-25T03:29:04Z [dnsseed] [ThreadDNSAddressSeed] 0 addresses found from DNS seeds
```
ACKs for top commit:
laanwj:
Code review ACK b4511e2e2e
MarcoFalke:
review ACK b4511e2e2e🌃
Tree-SHA512: d100f5364630c323f31d275259864c597f7725e462d5f4bdedcc7033ea616d7fc0d16ef1b2af557e692f4deea73c6773ccfc681589e7bf6ba970b9ec169040c7
9f21ed4037 [test] Check user agent string from test framework connections (John Newbery)
9ce4c3c4c1 [test] Add P2P_SERVICES to p2p.py (John Newbery)
010542614d [test] Move MY_RELAY to p2p.py (John Newbery)
9b4054cb7a [test] Move MY_SUBVERSION to p2p.py (John Newbery)
7e158a6910 [test] Move MY_VERSION to p2p.py (John Newbery)
652311165c [test] Move MIN_VERSION_SUPPORTED to p2p.py (John Newbery)
Pull request description:
The messages.py module should contain code and helpers for
[de]serializing p2p messages. Specific usage of those messages should
be in p2p.py. This PR moves test framework specific constants to p2p.py.
It also changes the SUBVERSION constant to be a string instead of a bytes object. That means that it needs to be explicitly converted to a bytes object to serialize into a version message. Failing to do so would cause an easy-to-spot bug. This should avoid silent failures like the one solved in #20522.
ACKs for top commit:
laanwj:
Code review ACK 9f21ed4037
Tree-SHA512: 41d46575ac0ec36ad074d6c6a5b9cef50b05eeb8ddd8ed0a8f0d0c4617cc7b8baa6580af5b83a668230ce1ac27bf0e56914d0361a48b1b05fd75e2e60350eeaf
de6b389d5d tests: Test getaddressinfo parent_desc (Andrew Chow)
e4ac869a0a rpc: Add parent descriptor to getaddressinfo output (Andrew Chow)
bbe4a36152 wallet: Add GetDescriptorString to DescriptorScriptPubKeyMan (Andrew Chow)
9be1437c49 descriptors: Add ToNormalizedString and tests (Andrew Chow)
Pull request description:
Adds `parent_desc` field to the `getaddressinfo` RPC to export a public descriptor. Using the given address, `getaddressinfo` will look up which `DescriptorScriptPubKeyMan` can be used to produce that address. It will then return the descriptor for that `DescriptorScriptPubKeyMan` in the `parent_desc` field. The descriptor will be in a normalized form where the xpub at the last hardened step is derived so that the descriptor can be imported to other wallets. Tests are added to check that the correct descriptor is being returned for the wallet's addresses and that these descriptors can be imported and used in other wallets.
As part of this PR, a `ToNormalizedString` function is added to the descriptor classes. This really only has an effect on `BIP32PubkeyProvider`s that have hardened derivation steps. Tests are added to check that normalized descriptors are returned.
ACKs for top commit:
Sjors:
utACK de6b389d5d
S3RK:
Tested ACK de6b389
jonatack:
Tested ACK de6b389d5d modulo a few minor comments
fjahr:
Code review ACK de6b389d5d
meshcollider:
Tested ACK de6b389d5d
Tree-SHA512: a633e4a39f2abbd95afd7488484cfa66fdd2651dac59fe59f2b80a0940a2a4a13acf889c534a6948903d701484a2ba1218e3081feafe0b9a720dccfa9e43ca2b
84716b134e Add "index/blockfilterindex -> validation -> index/blockfilterindex" to expected circular dependencies (Jonas Schnelli)
ab3a0a2fb9 Add functional test for blockfilterindex in prune-mode (Jonas Schnelli)
c286a22f7b Add debug startup parameter -fastprune for more effective pruning tests (Jonas Schnelli)
5e112269c3 Avoid pruning below the blockfilterindex sync height (Jonas Schnelli)
00d57ff768 Avoid accessing nullpointer in BaseIndex::GetSummary() (Jonas Schnelli)
6abe9f5b11 Allow blockfilter in conjunction with prune (Jonas Schnelli)
Pull request description:
Maintaining the blockfilterindexes in prune mode is possible and may lead to efficient p2p based rescans of wallets (restore backups, import/sweep keys) beyond the prune height (rescans not part of that PR).
This PR allows running the blockfilterindex(es) in conjunction with pruning.
* Bitcoind/Qt will shutdown during startup when missing block data has been detected ([re]enable `-blockfilterindex` when we already have pruned)
* manual block pruning is disabled during blockfilterindex sync
* auto-pruning is delayed during blockfilterindex sync
ToDos:
* [x] Functional tests
ACKs for top commit:
fjahr:
Code review ACK 84716b1
ryanofsky:
Code review ACK 84716b134e. Only changes since last review were suggested new FindFilesToPrune argument and test.
benthecarman:
tACK 84716b134e
Tree-SHA512: 91d832c6c562c463f7ec7655c08956385413a99a896640b9737bda0183607fac530435d03d87c3c0e70c61ccdfe73fe8f3639bc7d26d33ca7e60925ebb97d77a
Add a check that new connections from the test framework to the
node have the correct user agent string. This makes bugs easier
to detect if the user agent string ever changes.
The messages.py module should contain code and helpers for
[de]serializing p2p messages. Specific usage of those messages should
be in p2p.py. Therefore specify the nServices value in the calling code,
not in the messages.py module.
messages.py is for message and primitive data structures. Specifics
about the test framework's p2p implementation should be in p2p.py.
Also rename to P2P_VERSION_RELAY. Also rename msg_version.nRelay to
relay. In Bitcoin Core, this is referred to as fRelay, since it's a
bool, so this field has always been misnamed.
The messages.py module should contain code and helpers for
[de]serializing p2p messages. Specific usage of those messages should
be in p2p.py. Therefore move MY_SUBVERSION to p2p.py.
Also rename to P2P_SUBVERSION.
The messages.py module should contain code and helpers for
[de]serializing p2p messages. Specific usage of those messages should
be in p2p.py. Therefore move MY_VERSION to p2p.py.
Also rename to P2P_VERSION to distinguish it from
other versioning used in Bitcoin/Bitcoin Core.
Also always set the nVersion field in CBlockLocator to 0 and ignore the
field in deserialized messages. The field is not currently used for
anything in Bitcoin Core.
The messages.py module should contain code and helpers for
[de]serializing p2p messages. Specific usage of those messages should
be in p2p.py. Therefore move MIN_VERSION_SUPPORTED to p2p.py.
Also rename to MIN_P2P_VERSION_SUPPORTED to distinguish it from
other versioning used in Bitcoin/Bitcoin Core.
de85af5cce test: store subversion (user agent) as string in msg_version (Sebastian Falbesoner)
Pull request description:
It seems more natural to treat the "subversion" field (=user agent string, see [BIP 14](https://github.com/bitcoin/bips/blob/master/bip-0014.mediawiki#Proposal)) of a node as pure string rather than a bytestring within the test framework. This is also suggested with the naming prefix in `msg_version.strSubVer`: one probably wouldn't expect a field starting with "str" to be a bytestring that needs further decoding to be useful. This PR moves the encoding/decoding parts to the serialization/deserialization routines so that the user doesn't have to bother with that anymore.
Note that currently, in the master branch the `msg_version.strSubVer` is never read (only in `msg_version.__repr__`); However, one issue that is solved by this PR came up while testing #19509 (not merged yet): A decoding script for binary message capture files takes use of the functional test framework convert it into JSON format. Bytestrings will be convered to hexstrings, while pure strings will (surprise surprise) end up without modification in the file.
So without this patch, we get:
```
$ jq . out.json | grep -m5 strSubVer
"strSubVer": "2f5361746f7368693a32312e39392e302f"
"strSubVer": "2f5361746f7368693a302e32302e312f"
"strSubVer": "2f5361746f7368693a32312e39392e302f"
"strSubVer": "2f5361746f7368693a302e32302e312f"
"strSubVer": "2f5361746f7368693a32312e39392e302f"
```
After this patch:
```
$ jq . out2.json | grep -m5 strSubVer
"strSubVer": "/Satoshi:21.99.0/"
"strSubVer": "/Satoshi:0.20.1/"
"strSubVer": "/Satoshi:21.99.0/"
"strSubVer": "/Satoshi:0.20.1/"
"strSubVer": "/Satoshi:21.99.0/"
```
ACKs for top commit:
jnewbery:
utACK de85af5cce
Tree-SHA512: ff23642705c858e8387a625537dfec82e6b8a15da6d99b8d12152560e52d243ba17431b602b26f60996d897e00e3f37dcf8dc8a303ffb1d544df29a5937080f9
1afc0e4aa1 doc: remove potentially confusing ChainstateManager comment (James O'Beirne)
769a1ef9fd test: Add tests with maleated snapshot data (Fabian Jahr)
4d8de04f32 tests: add snapshot activation test (James O'Beirne)
31d225274f tests: add deterministic chain generation unittest fixture (James O'Beirne)
6606a4f8c6 move-onlyish: break out CreateUTXOSnapshot from dumptxoutset (James O'Beirne)
ad949ba449 txdb: don't reset during in-memory cache resize (James O'Beirne)
f6e2da5fb7 simplify ChainstateManager::SnapshotBlockhash() return semantics (James O'Beirne)
7a6c46b37e chainparams: add allowed assumeutxo values (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/master/proposal
---
This change proposes logic for activating UTXO snapshots, which is unused at the moment aside from an included unittest. There are a few moveonyish/refactoring commits to allow for halfway decent unittests.
Basic structure is included for specifying and checking the assumeutxo hash values used to validate activated snapshots. Initially I had specified a few height/hash pairs for mainnet in this change, but because of the security-critical nature of those parameters, I figured it was better to leave their inclusion to a future PR that includes only that change - my intent being that reviewers will be more likely to verify those parameters firsthand in a dedicated PR.
Aside from that and the snapshot activation logic, there are a few related changes:
- ~~allow caching the `nChainTx` value in the CCoinsViewDB; this is set during snapshot activation. Because we don't necessarily have access to the full chain at the time of snapshot load, this value is communicated through the snapshot metadata and must be cached within the chainstate to survive restarts.~~
- break out `CreateUTXOSnapshot()` from dumptxoutset. This is essentially a move-only change to allow the reuse of snapshot creation logic from within unittests.
- ...and a few other misc. changes that are solely related to unittests.
The move-onlyish commit is most easily reviewed with `--color-moved=zebra`.
ACKs for top commit:
fjahr:
Code review ACK 1afc0e4aa1
laanwj:
Code review ACK 1afc0e4aa1
Tree-SHA512: a4e4f0698f00a53ec298b5e8b7ef1c9fdf0185f95139d1b1f63cfdf6cbbd6d17b8c6e51bbf1de2e5f1a946bf49f8466232698ef55acce5a012c80b067da366ea
ef21fb7313 zmq test: speedup test by whitelisting peers (immediate tx relay) (Sebastian Falbesoner)
5c6546362d zmq test: fix flakiness by using more robust sync method (Sebastian Falbesoner)
8666033630 zmq test: accept arbitrary sequence start number in ZMQSubscriber (Sebastian Falbesoner)
6014d6e1b5 zmq test: dedup message reception handling in ZMQSubscriber (Sebastian Falbesoner)
Pull request description:
Fixes#20934 by using the "sync up" method described in https://github.com/bitcoin/bitcoin/issues/20538#issuecomment-738791868.
After improving robustness with this approach (commits 1-3), it turned out that there were still some fails, but those were unrelated to zmq: Out of 500 runs, 3 times `sync_mempool()` or `sync_blocks()` timed out, which can happen because the trickle relay time has no upper bound -- hence in rare cases, it takes longer than 60s. This is fixed by enabling immediate tx relay on node1 (commit 4), which as a nice side-effect also gives us a rough 2x speedup for the test.
For further details, also see the explanations in the commit messages.
There is no guarantee that the test is still not flaky, but it would help if potential reviewers would run the following script locally and report how many runs failed (feel free to do less than 1000 runs, as this takes quite a long if ran with `--valgrind`):
```
#!/bin/sh
OUTPUT_FILE=./zmq_results
echo ===== repeated zmq test ===== > $OUTPUT_FILE
for i in `seq 1000`; do
echo ------------------------
echo ----- test run $i -----
echo ------------------------
echo --- $i --- >> $OUTPUT_FILE
./test/functional/interface_zmq.py --valgrind
if [ $? -ne 0 ]; then
echo "FAILED. /o\\" >> $OUTPUT_FILE
else
echo "PASSED. \\o/" >> $OUTPUT_FILE
fi
done
echo Failed test runs:
grep FAILED $OUTPUT_FILE | wc -l
```
ACKs for top commit:
jonatack:
Light ACK ef21fb7313 with the caveat that I was unable to make the test fail with valgrind both here and on master, so I can't vouch that it actually fixes the CI flakiness. The test does run ~2x faster with this.
Tree-SHA512: 7a1e7592fbbd98e69e1e1294486b91253e589c72b3c6bbb7f587028ec07cca59b7d984e4ebf256c4bc3e8a529ec77d31842f3dd874038aea0b684abfea50306a
96635e6177 init: use GetNetworkNames() in -onlynet help (Jon Atack)
0dbde700a6 rpc: use GetNetworkNames() in getnetworkinfo and getpeerinfo helps (Jon Atack)
1c3af37881 net: create GetNetworkNames() (Jon Atack)
b45eae4d53 net: update NET_UNROUTABLE to not_publicly_routable in GetNetworkName() (Jon Atack)
Pull request description:
per the IRC discussion today at http://www.erisian.com.au/bitcoin-core-dev/log-2021-01-19.html#l-87
- return a more helpful string name for `Network::NET_UNROUTABLE`: "not_publicly_routable" instead of "unroutable"
- update the RPC getpeerinfo "network" help, and automate it and the getnetworkinfo "network#name" and the -onlynet help doc generation
ACKs for top commit:
theStack:
re-ACK 96635e6177🌳
MarcoFalke:
review ACK 96635e6177🐗
Tree-SHA512: 511a7d987126b48a7a090739aa7c4964b6186a3ff8f5f7eec9233dd816c6b7a6dc91b3ea6b824aa68f218a8a3ebdc6ffd214e9a88af38f2bf23f3257c4284c3a
3f8776a139 Re-add dead code detection (flack)
Pull request description:
This re-adds unreachable code detection for Python based on `vulture`.
Effectively, this reverts f4beb4996d. The difference to the previous version is that this runs with the `--min-confidence 100` setting. From https://pypi.org/project/vulture/:
> Use `--min-confidence 100` to only report code that is guaranteed to be unused within the analyzed files.
So this should avoid the previous issues where static analysis had wrong positives due to the dynamic nature of Python code by only reporting things that are unambiguous (such as code after a `return` statement). As such, there is not suppressions list.
My motivation was mainly #21081 which would have been caught by this (as can be seen by the CI run failing). This is still marked as draft because #21081 is needed to get the linter to pass. Also, there is a second problem that this found (see https://github.com/bitcoin/bitcoin/pull/19509/files#r571454691). From what I can tell, this is a spurious type comment that could just be removed (or if that line has no side effects it could also be deleted altogether?). I could add a commit here to fix it, but I wanted to see if there is interest in having this linter again in the first place
ACKs for top commit:
practicalswift:
ACK 3f8776a139
Tree-SHA512: 52314ad4f627d969de1eb15375ca677ed86a2e816fe773756a1ce22421214ba407b5a09a4bf701a3aab1a10c7b336f548e4cef3327edf154acba55e987db21f6
f64adc1eed test: remove unused function xor_bytes (Sebastian Falbesoner)
Pull request description:
The function `xor_bytes` was introduced in commit 3c226639eb (#19953, BIP340-342 validation), even [code-reviewed](https://github.com/bitcoin/bitcoin/pull/19953/files#r509383731), but actually never used. The [default signing algorithm in BIP340](https://github.com/bitcoin/bips/blob/master/bip-0340.mediawiki#Default_Signing) needs a xor operation, but this step is currently done by a single xor operation on large integer operands:
```
t = (sec ^ int.from_bytes(TaggedHash("BIP0340/aux", aux), 'big')).to_bytes(32, 'big')
```
Alternatively, we could keep the function and as well use it:
```diff
--- a/test/functional/test_framework/key.py
+++ b/test/functional/test_framework/key.py
@@ -492,7 +492,7 @@ def sign_schnorr(key, msg, aux=None, flip_p=False, flip_r=False):
P = SECP256K1.affine(SECP256K1.mul([(SECP256K1_G, sec)]))
if SECP256K1.has_even_y(P) == flip_p:
sec = SECP256K1_ORDER - sec
- t = (sec ^ int.from_bytes(TaggedHash("BIP0340/aux", aux), 'big')).to_bytes(32, 'big')
+ t = xor_bytes(sec.to_bytes(32, 'big'), TaggedHash("BIP0340/aux", aux))
kp = int.from_bytes(TaggedHash("BIP0340/nonce", t + P[0].to_bytes(32, 'big') + msg), 'big') % SECP256K1_ORDER
assert kp != 0
R = SECP256K1.affine(SECP256K1.mul([(SECP256K1_G, kp)]))
```
ACKs for top commit:
practicalswift:
cr ACK f64adc1eed: untested unused code should be removed
Tree-SHA512: e9afae303488f19c6f6f44874d3537ed1c8164a197490e2b4e34853db886b858825b719648fa1a30b95177dcee9cf241f94ee9b835f0a2cae07024ce38a8c090
fe3e993968 [p2p] No delay in adding fixed seeds if -dnsseed=0 and peers.dat is empty. Add -fixedseeds arg. (Dhruv Mehta)
Pull request description:
Closes#19795
Before PR: If `peers.dat` is empty and `-dnsseed=0`, bitcoind will fallback on to fixed seeds but only after a 60 seconds delay.
After PR: There's no 60 second delay.
To reproduce:
`rm ~/.bitcoin/peers.dat && src/bitcoind -dnsseed=0` without and with patch code
Other changes in the PR:
- `-fixedseeds` command line argument added: `-dnsseed=0 -fixedseeds=0 -addnode=X` provides a trusted peer only setup. `-dnsseed=0 -fixedseeds=0` allows for a `addnode` RPC to add a trusted peer without falling back to hardcoded seeds.
ACKs for top commit:
LarryRuane:
re-ACK fe3e993968
laanwj:
re-ACK fe3e993968
Tree-SHA512: 79449bf4e83a315be6dbac9bdd226de89d2a3f7f76d9c5640a2cb3572866e6b0e8ed67e65674c9824054cf13119dc01c7e1a33848daac6b6c34dbc158b6dba8f
060a2a64d4 ci: remove boost thread installation (fanquake)
06e1d7d81d build: don't build or use Boost Thread (fanquake)
7097add83c refactor: replace Boost shared_mutex with std shared_mutex in sigcache (fanquake)
8e55981ef8 refactor: replace Boost shared_mutex with std shared_mutex in cuckoocache tests (fanquake)
Pull request description:
This replaces `boost::shared_mutex` and `boost::unique_lock` with [`std::shared_mutex`](https://en.cppreference.com/w/cpp/thread/shared_mutex) & [`std::unique_lock`](https://en.cppreference.com/w/cpp/thread/unique_lock).
Even though [some concerns were raised](https://github.com/bitcoin/bitcoin/issues/16684#issuecomment-726214696) in #16684 with regard to `std::shared_mutex` being unsafe to use across some glibc versions, I still think this change is an improvement. As I mentioned in #21022, I also think trying to restrict standard library feature usage based on bugs in glibc is not only hard to do, but it's not currently clear exactly how we do that in practice (does it also extend to patching out use in our dependencies, should we be implementing more runtime checks for features we are using, when do we consider an affected glibc "old enough" not to worry about? etc). If you take a look through the [glibc bug tracker](https://sourceware.org/bugzilla/describecomponents.cgi?product=glibc) you'll no doubt find plenty of (active) bug reports for standard library code we already using. Obviously not to say we shouldn't try and avoid buggy code where possible.
Two other points:
[Cory mentioned in #21022](https://github.com/bitcoin/bitcoin/pull/21022#issuecomment-769274179):
> It also seems reasonable to me to worry that boost hits the same underlying glibc bug, and we've just not happened to trigger the right conditions yet.
Moving away from Boost to the standard library also removes the potential for differences related to Boosts configuration. Boost has multiple versions of `shared_mutex`, and what you end up using, and what it's backed by depends on:
* The version of Boost.
* The platform you're building for.
* Which version of `BOOST_THREAD_VERSION` is defined: (2,3,4 or 5) default=2. (see [here](https://www.boost.org/doc/libs/1_70_0/doc/html/thread/build.html#thread.build.configuration) for some of the differences).
* Is `BOOST_THREAD_V2_SHARED_MUTEX` defined? (not by default). If so, you might get the ["less performant, but more robust"](https://github.com/boostorg/thread/issues/230#issuecomment-475937761) version of `shared_mutex`.
A lot of these factors are eliminated by our use of depends, but users will have varying configurations. It's also not inconceivable to think that a distro, or some package manager might start defining something like `BOOST_THREAD_VERSION=3`. Boost tried to change the default from 2 to 3 at one point.
With this change, we no longer use Boost Thread, so this PR also removes it from depends, the build system, CI etc.
Previous similar PRs were #19183 & #20922. The authors are included in the commits here.
Also related to #21022 - pthread sanity checking.
ACKs for top commit:
laanwj:
Code review ACK 060a2a64d4
vasild:
ACK 060a2a64d4
Tree-SHA512: 572d14d8c9de20bc434511f20d3f431836393ff915b2fe9de5a47a02dca76805ad5c3fc4cceecb4cd43f3ba939a0508178c4e60e62abdbaaa6b3e8db20b75b03
e987ae5a55 test: Add test for deterministic UTXO set hash results (Fabian Jahr)
6ccc8fc067 test: Add test for gettxoutsetinfo RPC with MuHash (Fabian Jahr)
0d3b2f643d rpc: Add hash_type MUHASH to gettxoutsetinfo (Fabian Jahr)
2474645f3b refactor: Separate hash and stats calculation in coinstats (Fabian Jahr)
a1fcceac69 refactor: Improve encapsulation between MuHash3072 and Num3072 (Fabian Jahr)
Pull request description:
This is another Pr in the series PRs for Coinstatsindex (see overview in #18000). This PR adds the `hash_type` option `muhash` to `gettxoutsetinfo` through which the user can calculate the serialized muhash of the utxo set. This PR does not use the index yet.
ACKs for top commit:
Sjors:
tACK e987ae5
achow101:
ACK e987ae5a55
jonatack:
Tested re-ACK e987ae5a55 per `git diff 3506d90 e987ae5`, reviewed diff, debug built, ran gettxoutsetinfo -signet and help on this branch vs master, at height 23127 both returned `hash_serialized_2` of `2b72d65f3b6efb2311f58374ea2b939abf49684d44f4bafda45faa3b5452a454` and this branch returned `muhash` of `c9f1ff12d345ccf9939c6bbf087e6f7399b6115adee1569287e9c5c43dbb475c`
ryanofsky:
Code review ACK e987ae5a55. Looks very good. I left one suggestion to simplify code, but feel free to ignore it here and maybe consider it for later since PR has already had a lot of review.
Tree-SHA512: 9a739ce375e73749fa69a467262b60d3e5314ef384e2d7150b3bbc8e4125cd9fd1db95306623bb9a632fcbaf5d9d2bf2f5cc43bf717d4ff5e2c9c4b52dd9296c
3ddbf22ed1 util: Disallow negative mocktime (MarcoFalke)
f5f2f97168 net: Avoid UBSan warning in ProcessMessage(...) (practicalswift)
Pull request description:
Avoid UBSan warning in `ProcessMessage(...)`.
Context: https://github.com/bitcoin/bitcoin/pull/20380#issuecomment-770427182 (thanks Crypt-iQ!)
ACKs for top commit:
MarcoFalke:
re-ACK 3ddbf22ed1 only change is adding patch written by me
ajtowns:
ACK 3ddbf22ed1 -- code review only
Tree-SHA512: e8d7af0457ca86872b75a4e406c0a93aafd841c2962e244e147e748cc7ca118c56be0fdafe53765f4b291410030b2c3cc8f76f733b37a955d34fc885ab6037b9
fabeb5b9c7 fuzz: Disable shuffle when merge=1 (MarcoFalke)
Pull request description:
This should hopefully help make the deletion of fuzz inputs more deterministic.
My tests (N=1) revealed that without this patch 7000 files differ (https://github.com/bitcoin-core/qa-assets/pull/44#issuecomment-768841467). With this patch, "only" 2000 files differ.
ACKs for top commit:
practicalswift:
cr ACK fabeb5b9c7: `-shuffle=0` and `-prefer_small=1` make sense
Tree-SHA512: 21a701f52450d402a91dd6e0b33d564c63a9c3b919738eb9a80c24d48fc5b964088e325470738f39af0d595612c844acc7bf0941590cc2dc8c6f6ee4cb69c861
Speeds up the zmq test roughly by a factor of 2x (~20 sec. instead of
~40 sec.) and also avoids timeouts on the synchronization methods
(sync_mempool() / sync_blocks()) that happened with a slight chance.
This is due to the fact that there is no upper bound on the trickle
relay time, so even the default of 60s is sometimes too low. Fixed by
enabling immediate tx relay on node1.
After connecting the subscriber sockets to the node, there is no
guarantee that the node's zmq publisher interfaces are ready yet, which
means that potentially the first expected notification messages could
get lost and the test fails. Currently this is handled by just waiting
for a short period of time (200ms), which works most of the time but is
still problematic, as in some rare cases the setup time takes much
longer, even in the range of multiple seconds.
The solution in this commit approaches the problem by using a more
robust method of syncing up, originally proposed by instagibbs:
1. Generate a block on the node
2. Try to receive a notification on all subscribers
3. If all subscribers get a message within the timeout (1 second),
we are done, otherwise repeat starting from step 1
The ZMQSubscriber reception methods currently assert that the first
received publisher message has a sequence number of zero. In order to
fix the current test flakiness via "syncing up" to nodes in the setup
phase, we have to cope with the situation that messages get lost and the
first actual received message has a sequence number larger than zero.
fa0a4d6c60 test: remove assert_blockchain_height (MarcoFalke)
Pull request description:
This simplifies the code and solves intermittent timeouts caused by commit 0d39b5848a.
E.g. https://cirrus-ci.com/task/5196092369272832?command=ci#L3126
```
test 2021-02-08T12:27:56.275000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/tmp/cirrus-ci-build/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 127, in main
self.run_test()
File "/tmp/cirrus-ci-build/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/test/functional/feature_assumevalid.py", line 180, in run_test
self.assert_blockchain_height(self.nodes[0], 101)
File "/tmp/cirrus-ci-build/ci/scratch/build/bitcoin-x86_64-pc-linux-gnu/test/functional/feature_assumevalid.py", line 92, in assert_blockchain_height
assert False, "blockchain too short after timeout: %d" % current_height
AssertionError: blockchain too short after timeout: 101
ACKs for top commit:
glozow:
ACK fa0a4d6c60
Tree-SHA512: 3859b0c1581c21f03c775f119204cc3a219e5d86346883634886f6da46feaf254b9c6c49c1ec4581ffe409cdf05f6e91ec38c3976c3daf4a9e67f96ddc1e0dce
fa362064e3 rpc: Return total fee in mempool (MarcoFalke)
Pull request description:
This avoids having to loop over the whole mempool to query each entry's fee
ACKs for top commit:
achow101:
ACK fa362064e3
glozow:
ACK fa362064e3🧸
jnewbery:
ACK fa362064e3
Tree-SHA512: e2fa1664df39c9e187f9229fc35764ccf436f6f75889c5a206d34fff473fc21efbf2bb143f4ca7895c27659218c22884d0ec4195e7a536a5a96973fc9dd82d08
9913419cc9 test: remove type: comments in favour of actual annotations (fanquake)
Pull request description:
Now that we require Python 3.6+, we should be using variable type
annotations directly rather than `# type:` comments.
Also takes care of the discarded value issue in p2p_message_capture.py.
See: https://github.com/bitcoin/bitcoin/pull/19509/files#r571674446.
ACKs for top commit:
MarcoFalke:
review ACK 9913419cc9
jnewbery:
Code review ACK 9913419cc9
Tree-SHA512: 63aba5eef6c1320578f66cf8a6d85ac9dbab9d30b0d21e6e966be8216e63606de12321320c2958c67933bf68d10f2e76e9c43928e5989614cea34dde4187aad8
Now that we require Python 3.6+, we should be using variable type
annotations directly rather than # type: comments.
Also takes care of the discarded value issue in p2p_message_capture.py.
See: https://github.com/bitcoin/bitcoin/pull/19509/files#r571674446.
5e0cd25e29 fix the unreachable code at feature_taproot (Bruno Garcia)
Pull request description:
This PR removes the unnecessary return statement at the beginning of the function that makes the rest of the function unreachable.
ACKs for top commit:
practicalswift:
cr ACK 5e0cd25e29: patch looks correct!
sipa:
ACK 5e0cd25e29.
theStack:
Tested ACK 5e0cd25e29🏔️
sanket1729:
tACK 5e0cd25e29. I noted this a while ago while fixing feature_taproot.py for elements. Verified that the extreme ranges of CScriptNum are correct and the overflow case for `CHECKSIGADD` works as intended. Adding 1 to 2^31 - 1 results in an overflow, but the interpreter puts a `vch` of corresponding to 2^31 on stack. Even though it cannot be converted to CscriptNum(restricted to 4 bytes), it's result can still be compared by OP_EQUAL.
Tree-SHA512: fff9be3be94f4b3f3ccf24bf588d96e84d14806f82692dccd31631b0e5c79a7575a96c308cb5a4f610ab02e2f854b899f374437c33ecf6d52055d333f2de9b27
49797c3ccf tests: Disable bdb dump test when no bdb (Andrew Chow)
1194cf9269 Fix wallet_send.py wallet setup to work with descriptors (Andrew Chow)
fbaea7bfe4 Require legacy wallet for wallet_upgradewallet.py (Andrew Chow)
b1b679e0ab Explicitly mark legacy wallet tests as such (Andrew Chow)
09514e1bef Setup wallets for interface_zmq.py (Andrew Chow)
4d03ef9a73 Use MiniWallet in rpc_net.py (Andrew Chow)
4de23824b0 Setup wallets for interface_bitcoin_cli.py (Andrew Chow)
7c71c627d2 Setup wallets with descriptors for feature_notifications (Andrew Chow)
1f1bef8dba Have feature_filelock.py test both bdb and sqlite, depending on compiled (Andrew Chow)
c77975abc0 Disable upgrades tests that require BDB if BDB is not compiled (Andrew Chow)
1f20cac9d4 Disable wallet_descriptor.py bdb format check if BDB is not compiled (Andrew Chow)
3641597d7e tests: Don't make any wallets unless wallet is required (Andrew Chow)
b9b88f57a9 Skip legacy wallet reliant tests if BDB is not compiled (Andrew Chow)
6f36242389 tests: Set descriptors default based on compilation (Andrew Chow)
Pull request description:
This PR fixes tests for when BDB is not compiled. Tests which rely on or test legacy wallet behavior are disabled and skipped when BDB is not compiled. For the components of some tests that are for legacy wallet things, those parts of the tests are skipped.
For the majority of tests, changes are made so that they can be run with either legacy wallets or descriptor wallets without materially effecting the test. Most tests only need the wallet for balance and transactions, so the type of wallet is not an important part of those tests. Additionally, some tests are wallet agnostic and modified to instead use the test framework's MiniWallet.
ACKs for top commit:
laanwj:
ACK 49797c3ccf
ryanofsky:
Code review ACK 49797c3ccf. Only change since last review is dropping last commit. Previous review w/ suggestions for future followup is https://github.com/bitcoin/bitcoin/pull/20267#pullrequestreview-581508843
Tree-SHA512: 69659f8a81fb437ecbca962f4082c12835282dbf1fba7d9952f727a49e01981d749af9b09feda1c8ca737516c7d7a08ef17e782795df3fa69892d5021b41c1ed
590bda79e8 scripted-diff: Remove setup_clean_chain if default is not changed (Fabian Jahr)
98892f39e3 doc: Improve setup_clean_chain documentation (Fabian Jahr)
Pull request description:
The first commit improves documentation on setup_clean_chain which is misunderstood quite frequently. Most importantly it fixes the TestShell docs which are simply incorrect.
The second commit removes the instances of `setup_clean_clain` in functional tests where it is not changing the default.
This used to be part of #19168 which also sought to rename`setup_clean_chain`.
ACKs for top commit:
jonatack:
ACK 590bda79e8
Tree-SHA512: a7881186e65d31160b8f84107fb185973b37c6e50f190a85c6e2906a13a7472bb4efa9440bd37fe0a9ac5cd2d1e8559870a7e4380632d9a249eca8980b945f3e
fa61b9d1a6 util: Add ArgsManager::GetCommand() and use it in bitcoin-wallet (MarcoFalke)
7777105a24 refactor: Move all command dependend checks to ExecuteWalletToolFunc (MarcoFalke)
fa06bce4ac test: Add tests (MarcoFalke)
fac05ccdad wallet: [refactor] Pass ArgsManager to WalletAppInit (MarcoFalke)
Pull request description:
This not only moves the parsing responsibility out from the wallet tool, but it also makes it easier to implement bitcoin-util #19937Fixes: #20902
ACKs for top commit:
ajtowns:
ACK fa61b9d1a6
fjahr:
Code review ACK fa61b9d1a6
Tree-SHA512: 79622b806e8bf9dcd0dc24a8a6687345710df57720992e83a41cd8d6762a6dc112044ebc58fcf6e8fbf45de29a79b04873c5b8c2494a1eaaf902a2884703e47b
bff7c66e67 Add documentation to contrib folder (Troy Giorshev)
381f77be85 Add Message Capture Test (Troy Giorshev)
e4f378a505 Add capture parser (Troy Giorshev)
4d1a582549 Call CaptureMessage at appropriate locations (Troy Giorshev)
f2a77ff97b Add CaptureMessage (Troy Giorshev)
dbf779d5de Clean PushMessage and ProcessMessages (Troy Giorshev)
Pull request description:
This PR introduces per-peer message capture into Bitcoin Core. 📓
## Purpose
The purpose and scope of this feature is intentionally limited. It answers a question anyone new to Bitcoin's P2P protocol has had: "Can I see what messages my node is sending and receiving?".
## Functionality
When a new debug-only command line argument `capturemessages` is set, any message that the node receives or sends is captured. The capture occurs in the MessageHandler thread. When receiving a message, it is captured as soon as the MessageHandler thread takes the message off of the vProcessMsg queue. When sending, the message is captured just before the message is pushed onto the vSendMsg queue.
The message capture is as minimal as possible to reduce the performance impact on the node. Messages are captured to a new `message_capture` folder in the datadir. Each node has their own subfolder named with their IP address and port. Inside, received and sent messages are captured into two binary files, msgs_recv.dat and msgs_sent.dat, like so:
```
message_capture/203.0.113.7:56072/msgs_recv.dat
message_capture/203.0.113.7:56072/msgs_sent.dat
```
Because the messages are raw binary dumps, included in this PR is a Python parsing tool to convert the binary files into human-readable JSON. This script has been placed on its own and out of the way in the new `contrib/message-capture` folder. Its usage is simple and easily discovered by the autogenerated `-h` option.
## Future Maintenance
I sympathize greatly with anyone who says "the best code is no code".
The future maintenance of this feature will be minimal. The logic to deserialize the payload of the p2p messages exists in our testing framework. As long as our testing framework works, so will this tool.
Additionally, I hope that the simplicity of this tool will mean that it gets used frequently, so that problems will be discovered and solved when they are small.
## FAQ
"Why not just use Wireshark"
Yes, Wireshark has the ability to filter and decode Bitcoin messages. However, the purpose of the message capture added in this PR is to assist with debugging, primarily for new developers looking to improve their knowledge of the Bitcoin Protocol. This drives the design in a different direction than Wireshark, in two different ways. First, this tool must be convenient and simple to use. Using an external tool, like Wireshark, requires setup and interpretation of the results. To a new user who doesn't necessarily know what to expect, this is unnecessary difficulty. This tool, on the other hand, "just works". Turn on the command line flag, run your node, run the script, read the JSON. Second, because this tool is being used for debugging, we want it to be as close to the true behavior of the node as possible. A lot can happen in the SocketHandler thread that would be missed by Wireshark.
Additionally, if we are to use Wireshark, we are at the mercy of whoever it maintaining the protocol in Wireshark, both as to it being accurate and recent. As can be seen by the **many** previous attempts to include Bitcoin in Wireshark (google "bitcoin dissector") this is easier said than done.
Lastly, I truly believe that this tool will be used significantly more by being included in the codebase. It's just that much more discoverable.
ACKs for top commit:
MarcoFalke:
re-ACK bff7c66e67 only some minor changes: 👚
jnewbery:
utACK bff7c66e67
theStack:
re-ACK bff7c66e67
Tree-SHA512: e59e3160422269221f70f98720b47842775781c247c064071d546c24fa7a35a0e5534e8baa4b4591a750d7eb16de6b4ecf54cbee6d193b261f4f104e28c15f47
dc8be12510 refactor: remove boost::thread_group usage (fanquake)
Pull request description:
Post #18710, there isn't much left using `boost::thread_group`, so should just be able to replace it with the standard library. This also removes the last use of `boost::thread_interrupted`.
After this change, last piece of Boost Thread we'd be using is `boost::shared_mutex`. See the commentary [here](https://github.com/bitcoin/bitcoin/issues/16684#issuecomment-726214696) as to why it may be non-trivial to swap that for `std::shared_mutex` in the near future.
Closes#17307
ACKs for top commit:
laanwj:
Code review re-ACK dc8be12510
MarcoFalke:
review ACK dc8be12510🔁
jonatack:
Non-expert code review ACK dc8be12510, also checked range-diff since last review and that local debug build is clean with gcc 10.2.1-6 on Debian
Tree-SHA512: 5510e2d760cce824234207dc86b1551ca8f21cbf3a2ce753c0254a0d03ffd83c94e449aec202fb7bd76e6fc64df783a6b70a736b0add9ece3734bb9c8ce8fc2f
5353b0c64d Change type definitions for "chain" and "setup_clean_chain" from type comments to Python 3.6+ types. Additionally, set type for "nodes". (Kiminuo)
Pull request description:
### Motivation
When I wanted to understand better https://github.com/bitcoin/bitcoin/pull/19145/files#diff-4bebbd3b112dc222ea7e75ef051838ceffcee63b9e9234a98a4cc7251d34451b test, I noticed that navigation in PyCharm/VS Code did not work for `nodes` variable. I think this is frustrating, especially for newcomers.
### Summary
* This PR modifies Python 3.5 [type comments](https://mypy.readthedocs.io/en/stable/cheat_sheet_py3.html#variables) to Python 3.6+ types and adds a proper type for `nodes` [instance attribute](https://mypy.readthedocs.io/en/stable/class_basics.html#instance-and-class-attributes).
* This PR does not change behavior.
* This PR is intentionally very small, if the concept is accepted, a follow-up PRs can be more ambitious.
### End result
1. Open `test/functional/feature_abortnode.py`
2. Move your caret to: `self.nodes[0].generate[caret here](3)`
3. Use "Go to definition" [F12] should work now.
I have tested this on PyCharm (Windows, Ubuntu) and VS Code (Windows, Ubuntu).
Note: Some `TestNode` methods (e.g. `self.nodes[0].getblock(...)` ) use `__call__` mechanism and navigation does not work for them even with this PR.
ACKs for top commit:
laanwj:
ACK 5353b0c64d
theStack:
ACK 5353b0c64d
Tree-SHA512: 821773f052ab9b2889dc357d38c59407a4af09e3b86d7134fcca7d78e5edf3a5ede9bfb37595ea97caf9ebfcbda372bcf73763b7f89b0677670f21b3e396a12b
48c8a9b964 net_processing: log txrelay flag from version message (Anthony Towns)
98fab37ca0 net: use peer=N instead of from=N in debug log (Anthony Towns)
12302105bb net_processing: additional debug logging for ignored messages (Anthony Towns)
f7edea3b7c net: make debug logging conditional on -debug=net (Anthony Towns)
a410ae8cb0 net, net_processing: log disconnect reasons with -debug=net (Anthony Towns)
Pull request description:
A few changes to -debug=net logging:
* always log when disconnecting a peer
* only log various connection errors when -debug=net is enabled, since errors from random untrusted peers is completely expected
* log when ignoring a message due to violating protocol (primarily to make it easier to debug other implementations)
* use "peer=123" rather than "from 123" to make grepping logs a bit easier
* log the value of the bip-37 `fRelay` field in version messages both when sending and receiving a version message
ACKs for top commit:
jnewbery:
ACK 48c8a9b964
MarcoFalke:
re-ACK 48c8a9b964 only change is rebase 🚓
practicalswift:
re-ACK 48c8a9b964
Tree-SHA512: 6ac530d883dffc4fd7fe20b1dc5ebb5394374c9b499aa7a253eb4a3a660d8901edd72e5ad21ce4a2bf71df25e8f142087755f9756f3497f564ef453a7e9246c1
faff3991a9 ci: Fuzz with integer sanitizer (MarcoFalke)
Pull request description:
Otherwise the suppressions file will go out of sync
ACKs for top commit:
practicalswift:
cr ACK faff3991a9: patch looks correct
Tree-SHA512: 349216d071a2c5ccf24565fe0c52d7a570ec148d515d085616a284f1ab9992ce10ff82eb17962dddbcda765bbd3a9b15e8b25f34bdbed99fc36922d4161d307c
Affects the following RPCs:
- getblockheader
- getblock
Also adds trivial tests on genesis block (should not contain
"previousblockhash") and best block (should not contain
"nextblockhash").
647b81b709 wallet, rpc: add listdescriptors command (Ivan Metlushko)
Pull request description:
Looking for concept ACKs
**Rationale**: allow users to inspect the contents of their newly created descriptor wallets.
Currently the command only returns xpubs which is not very useful in itself, but there are multiples ways to extend it:
* add an option to export xprv
* with #19136 it'll be possible to return normalised descriptors suitable for a watch-only purposes
The output is compatible with `importdescriptors` command so it could be easily used for backup/recover purposes.
**Output example:**
```json
[
{
"desc": "wpkh(tpubD6NzVbkrYhZ4WW6E2ZETFyNfq2hfF23SKxqSGFvUpPAY58jmmuBybwqwFihAyQPk9KnwTt5516NDZRJ7k5QPeKjy7wuVd5WvXNxwwAs5tUD/*)#nhavpr5h",
"timestamp": 1296688602,
"active": false,
"range": [
0,
999
],
"next": 0
}
]
```
ACKs for top commit:
jonatack:
re-ACK 647b81b709 rebased to master, debug builds cleanly, reviewed diff since last review, tested with a descriptor wallet (and with a legacy wallet)
achow101:
re-ACK 647b81b
Tree-SHA512: 51a3620bb17c836c52cecb066d4fa9d5ff418af56809046eaee0528c4dc240a4e90fff5711ba96e399c6664e00b9ee8194e33852b1b9e75af18061296e19a8a7
Determines whether descriptors should be used based on whether the
--descriptor or --legacy-wallet option is set,
and the compiled support. If no option is set and both BDB and SQLite
are available, it defaults to legacy.
This is used to switch descriptor agnostic tests between descriptors and
legacy wallet.
a6739cc868 rpc: Add specific error code for "wallet already loaded" (Wladimir J. van der Laan)
Pull request description:
Add a separate RPC error code for "wallet already loaded" to avoid having to match on message to detect this.
Requested by shesek for rust-bitcoinrpc.
If concept ACKed needs:
- [ ] Release note
- [x] A functional test (updated the existing test to make it pass, I think this is enough)
ACKs for top commit:
jonasschnelli:
Code Review ACK a6739cc868
promag:
Code review ACK a6739cc868.
Tree-SHA512: 9091872e6ea148aec733705d6af330f72a02f23b936b892ac28f9023da7430af6332418048adbee6014305b812316391812039e9180f7f3362d11f206c13b7d0
f0f8b1a076 fuzz: Add UBSan suppressions needed for fuzz tests to not warn under -fsanitize=integer (practicalswift)
58232e3ffb fuzz: Avoid -fsanitize=integer warnings in fuzzing harnesses (practicalswift)
Pull request description:
Add UBSan suppressions needed for fuzz tests to not warn under `-fsanitize=integer`.
Avoid `-fsanitize=integer` warnings in fuzzing harnesses.
Suppressed warnings (excluding warnings from `src/crypto/` and `src/test/`):
```
addrman.cpp:306:24: runtime error: implicit conversion from type 'long' of value 5190149478 (64-bit, signed) to type 'uint32_t' (aka 'unsigned int') changed the value to 895182182 (32-bit, unsigned)
addrman.h:446:43: runtime error: implicit conversion from type 'int' of value -22 (32-bit, signed) to type 'const uint8_t' (aka 'const unsigned char') changed the value to 234 (8-bit, unsigned)
arith_uint256.cpp:32:35: runtime error: left shift of 1712128 by 24 places cannot be represented in type 'uint32_t' (aka 'unsigned int')
arith_uint256.cpp:47:39: runtime error: left shift of 4294966784 by 31 places cannot be represented in type 'uint32_t' (aka 'unsigned int')
chain.cpp:151:12: runtime error: implicit conversion from type 'int' of value -1 (32-bit, signed) to type 'unsigned long' changed the value to 18446744073709551615 (64-bit, unsigned)
coins.cpp:114:22: runtime error: unsigned integer overflow: 0 - 96 cannot be represented in type 'unsigned long'
compressor.cpp:162:33: runtime error: unsigned integer overflow: 15617702637291228364 * 10 cannot be represented in type 'unsigned long'
compressor.cpp:188:11: runtime error: unsigned integer overflow: 2265760372865400000 * 10 cannot be represented in type 'unsigned long'
hash.cpp:13:15: runtime error: left shift of 1692305888 by 15 places cannot be represented in type 'uint32_t' (aka 'unsigned int')
pubkey.h:152:23: runtime error: unsigned integer overflow: 0 - 1 cannot be represented in type 'unsigned int'
streams.h:570:31: runtime error: left shift of 350879 by 52 places cannot be represented in type 'uint64_t' (aka 'unsigned long')
util/bip32.cpp:57:36: runtime error: left shift of 3241096244 by 1 places cannot be represented in type 'unsigned int'
util/strencodings.cpp:562:38: runtime error: implicit conversion from type 'unsigned char' of value 255 (8-bit, unsigned) to type 'char' changed the value to -1 (8-bit, signed)
util/strencodings.h:164:24: runtime error: implicit conversion from type 'int' of value -74 (32-bit, signed) to type 'unsigned long' changed the value to 18446744073709551542 (64-bit, unsigned)
```
The warnings above happen here:
32b191fb66/src/addrman.cpp (L306)32b191fb66/src/addrman.h (L446)32b191fb66/src/arith_uint256.cpp (L32)32b191fb66/src/arith_uint256.cpp (L47)32b191fb66/src/chain.cpp (L151)32b191fb66/src/coins.cpp (L114)32b191fb66/src/compressor.cpp (L162)32b191fb66/src/compressor.cpp (L188)32b191fb66/src/hash.cpp (L13)32b191fb66/src/pubkey.h (L152)32b191fb66/src/streams.h (L570)32b191fb66/src/util/bip32.cpp (L57)32b191fb66/src/util/strencodings.cpp (L562)32b191fb66/src/util/strencodings.h (L164)
ACKs for top commit:
MarcoFalke:
review ACK f0f8b1a076🤚
Tree-SHA512: a8f04f7cc055d03653161de1d9d14d106a6280cea1e86a1243abcd57cf8e61dcf5f731d0ab0da5b390790e816022ff7a70759a641463bc7e3303076b8667009f
fa39c8a3e8 test: Work around libFuzzer deadlock (MarcoFalke)
Pull request description:
Only required part is `symbolize=0`, but the other changes shouldn't hurt
ACKs for top commit:
practicalswift:
cr ACK fa39c8a3e8: patch looks correct
Tree-SHA512: 9cddf1de46ad12aea9b8be2c1acb86ba0e07ffdb52f8155d943edf970955551c7cb049a3a6c027846b45dab0dc0966dec42999476ebde50aa761a08dbb751eae
8f0b64fb51 Better error messages for invalid addresses (Bezdrighin)
Pull request description:
This PR addresses #20809.
We add more detailed error messages in case an invalid address is provided inside the 'validateaddress' and 'getaddressinfo' RPC calls. This also covers the case when a user provides an address from a wrong network.
We also add a functional test to test the new error messages.
ACKs for top commit:
kristapsk:
ACK 8f0b64fb51
meshcollider:
Code review ACK 8f0b64fb51
Tree-SHA512: ca0f806ab573e96b79e98d9f8c810b81fa99c638d9b5e4d99dc18c8bd2568e6a802ec305fdfb2983574a97a19a46fd53b77645f8078fb77e9deb24ad2a22cf93
bb6fcc75d1 refactor: Drop boost::thread stuff in CCheckQueue (Hennadii Stepanov)
6784ac471b bench: Use CCheckQueue local thread pool (Hennadii Stepanov)
dba30695fc test: Use CCheckQueue local thread pool (Hennadii Stepanov)
01511776ac Add local thread pool to CCheckQueue (Hennadii Stepanov)
0ef938685b refactor: Use member initializers in CCheckQueue (Hennadii Stepanov)
Pull request description:
This PR:
- gets rid of `boost::thread_group` in the `CCheckQueue` class
- allows thread safety annotation usage in the `CCheckQueue` class
- is alternative to #14464 (https://github.com/bitcoin/bitcoin/pull/18710#issuecomment-616618525, https://github.com/bitcoin/bitcoin/pull/18710#issuecomment-617291612)
Also, with this PR (I hope) it could be easier to resurrect a bunch of brilliant ideas from #9938.
Related: #17307
ACKs for top commit:
laanwj:
Code review ACK bb6fcc75d1
LarryRuane:
ACK bb6fcc75d1
jonatack:
Code review ACK bb6fcc75d1 and verified rebase to master builds cleanly with unit/functional tests green
Tree-SHA512: fddeb720d5a391b48bb4c6fa58ed34ccc3f57862fdb8e641745c021841c8340e35c5126338271446cbd98f40bd5484f27926aa6c3e76fa478ba1efafe72e73c1
This commit addresses #20809.
We add an additional 'error' property in the result of 'validateaddress' in case the address is not valid that gives a short description of why the address in invalid. We also change the error message returned by 'getaddressinfo' in case the address is invalid.
Add a functional test for CaptureMessage. This connects and then
disconnects a peer so that the handshake can be used to check if capture
is being done correctly.
Included in a docstring in the test is the following:
From the data file we'll only check the structure.
We won't care about things like:
- Deserializing the payload of the message
- This is managed by the deserialize methods in
test_framework.messages
- The order of the messages
- There's no reason why we can't, say, change the order of the
messages in the handshake
- Message Type
- We can add new message types
We're ignoring these because they're simply too brittle to test here.
This commit adds contrib/message-capture/message-capture-parser.py, a python
script to be used alongside -capturemessages to parse the captured
messages.
It is complete with arguments and will parse any file given, sorting the
messages in the files when creating the output. If an output file is
specified with -o or --output, it will dump the messages in json format
to that file, otherwise it will print to stdout.
The small change to the unused msg_generic is to bring it in line with
the other message classes, purely to avoid a bug in the future.
ff44cae279 test: Change feature_config_args.py not to rely on strange regtest=0 behavior (Russell Yanofsky)
Pull request description:
Update test to simply generate a normal mainnet configuration file instead of using a crazy setup where a regtest=1 config file using an includeconf in the [regtest] section includes another config file that specifies regtest=0, retroactively switching the network to mainnet.
This setup was fragile and only worked because the triggered InitError happened early enough that none of the ignored [regtest] options mattered (only affecting log output).
This change was originally made as part of #17493
Top commit has no ACKs.
Tree-SHA512: 3f77305454f04438493dfc2abd78a00434b30869454d1c3f54587b9c1f63239c49c90fb3b4d3a777ad130f2184e0f2dac87cee4cd23c50f1b3496a375943da01
4efb6c2d3b zmq test: deduplicate test setup code (node restart, topics subscription) (Sebastian Falbesoner)
Pull request description:
This PR deduplicates common setup code for the ZMQ functional test. The following steps, previously duplicated in each sub-test, are put into a new method `setup_zmq_test(...)`:
- create subscriber sockets (`zmq.SUB`) for each topic with the specified timeout (default 60s)
- restart node0 with specified zmq notifications enabled (`-zmqpub...=tcp://127.0.0.1:...`...)
- if desired, connect node0 with node1 (note done by default)
- connect all susbcriber sockets to publisher (running on node0)
- wait a bit (currently 200ms), to _"Relax so that the subscribers are ready before publishing zmq messages"_
Note that the last point should be repaced by a more robust method, as this test is still flaky, see #20934 (also #20590 and #20538).
ACKs for top commit:
instagibbs:
ACK 4efb6c2d3b
laanwj:
Code review ACK 4efb6c2d3b
Tree-SHA512: d49626756a9c669f1133f1b73ce273994b58c760ce0d6a4bdaa384f043a74149dc2b9fa66fe990413d9105f9c3b6ea973e099669e8e02f2902a5b84fa995028c
1fca9811e1 lint: Skip whitespace lint for guix patches (Carl Dong)
a91c46c57d guix: Make nsis reproducible by respecting SOURCE-DATE-EPOCH (Carl Dong)
Pull request description:
```
When building nsis, if VERSION is not specified, it defaults to
cvs_version which is non-deterministic as it includes the current date.
This patches nsis to default to SOURCE_DATE_EPOCH if it exists so that
nsis is reproducible.
Upstream change: https://github.com/kichik/nsis/pull/13
```
Sidenote: also a good demonstration of how Guix allows us to flexibly patch our tools!
Note to reviewers: if you want to compare hashes, please build after Jan 16th 2021 without my substitute server enabled!
ACKs for top commit:
fanquake:
ACK 1fca9811e1
Tree-SHA512: b800e0ce5f73827ad353739effb9167ec3a6bdb362c725ae20dd3f025ce78660f85c70ce1d75cd0896facf1e8fe38a9e058459ed13dec71ab3a2fe41e20eaa5d
ea0a7ec949 Remove deprecated bumpfee behavior (Andrew Chow)
Pull request description:
Removes the deprecation message, behavior, and test.
This was marked for removal in 22.0.
ACKs for top commit:
promag:
ACK ea0a7ec949, maybe add need release notes tag.
Tree-SHA512: d1626906849f6ee37213c32e5f8c1433ad8fb7beabcd88f5801b1964b322171a2341bdfbd9a3a5ab39b2fd9d9c6a05f73298583423a73cab1275653105c03e8e
fa0aa87071 rpc: Return wtxid from testmempoolaccept (MarcoFalke)
Pull request description:
It would be nice if `testmempoolaccept` returned the unique wtxid directly to avoid a costly `decoderawtransaction` roundtrip
ACKs for top commit:
mjdietzx:
utACK fa0aa87071
stackman27:
utACK [`fa0aa87`](fa0aa87071)
glozow:
cr ACK fa0aa87071
Tree-SHA512: 05dbaf46d93e47e9eedb725c2f57175e6d4e1722da0531fe4f80e74fc2518911da87634f25f61fa2bc8d87a3017e82fd0684b09a0a9706d71deed970035c2e7a
b4dd2ef800 [test] Test the add_outbound_p2p_connection functionality (Amiti Uttarwar)
602e69e427 [test] P2PBlocksOnly - Test block-relay-only connections. (Amiti Uttarwar)
8bb6beacb1 [test/refactor] P2PBlocksOnly - Extract transaction violation test into helper. (Amiti Uttarwar)
99791e7560 [test/refactor] P2PBlocksOnly - simplify transaction creation using blocktool helper. (Amiti Uttarwar)
3997ab9154 [test] Add test framework support to create outbound connections. (Amiti Uttarwar)
5bc04e8837 [rpc/net] Introduce addconnection to test outbounds & blockrelay (Amiti Uttarwar)
Pull request description:
The existing functional test framework uses the `addnode` RPC to spin up manual connections between bitcoind nodes. This limits our ability to add integration tests for our networking code, which often executes different code paths for different connection types.
**This PR enables creating `outbound` & `block-relay-only` P2P connections in the functional tests.** This allows us to increase our p2p test coverage, since we can now verify expectations around these connection types.
This builds out the [prototype](https://github.com/bitcoin/bitcoin/issues/14210#issuecomment-527421978) proposed by ajtowns in #14210. 🙌🏽
An overview of this branch:
- introduces a new test-only RPC function `addconnection` which initiates opening an `outbound` or `block-relay-only` connection. (conceptually similar to `addnode` but for different connection types & restricted to regtest)
- adds `test_framework` support so a mininode can open an `outbound`/`block-relay-only` connection to a `P2PInterface`/`P2PConnection`.
- updates `p2p_blocksonly` tests to create a `block-relay-only` connection & verify expectations around transaction relay.
- introduces `p2p_add_connections` test that checks the behaviors of the newly introduced `add_outbound_p2p_connection` test framework function.
With these changes, there are many more behaviors that we can add integration tests for. The blocksonly updates is just one example.
Huge props to ajtowns for conceiving the approach & providing me feedback as I've built out this branch. Also thank you to jnewbery for lots of thoughtful input along the way.
ACKs for top commit:
troygiorshev:
reACK b4dd2ef800
jnewbery:
utACK b4dd2ef800
MarcoFalke:
Approach ACK b4dd2ef800🍢
Tree-SHA512: d1cba768c19c9c80e6a38b1c340cc86a90701b14772c4a0791c458f9097f6a4574b4a4acc7d13d6790c7b1f1f197e2c3d87996270f177402145f084ef8519a6b
39b43298d9 test: add test for banning of non-IP addresses (Vasil Dimov)
94d335da7f net: allow CSubNet of non-IP networks (Vasil Dimov)
Pull request description:
Allow creation of valid `CSubNet` objects of non-IP networks and only
match the single address they were created from (like /32 for IPv4 or
/128 for IPv6).
This fixes a deficiency in `CConnman::DisconnectNode(const CNetAddr& addr)`
and in `BanMan` which assume that creating a subnet from any address
using the `CSubNet(CNetAddr)` constructor would later match that address
only. Before this change a non-IP subnet would be invalid and would not
match any address.
ACKs for top commit:
jonatack:
Code review re-ACK 39b43298d9 per `git diff 5e95ce6 39b4329`; only change since last review is improvements to the functional test; verified the test fails on master @ 616eace0 where expected (`assert(self.is_banned(node, tor_addr))` fails and unban unfails)
laanwj:
code review ACK 39b43298d9
Tree-SHA512: 3239b26d0f2fa2d1388b4fdbc1d05ce4ac1980be699c6ec46049409baefcb2006b1e72b889871e2210e897f6725c48e873f68457eea7e6e4958ab4f959d20297
faabc26a61 test: Replace getmempoolentry with testmempoolaccept in MiniWallet (MarcoFalke)
Pull request description:
This is a refactor to not use the return value of `sendrawtransaction` and `getmempoolentry` with the goal that submitting the tx to the mempool will become optional.
ACKs for top commit:
mjdietzx:
ACK faabc26a61
Tree-SHA512: 4260a59e65fed1c807530dad23f1996ba6e881bcce91995f5b498a0be6001f67b3e0251507c8801750fe105410147c68bb2f393ebe678c6a3a4d045e5d72fc19
faa8f68943 Replace boost::variant with std::variant (MarcoFalke)
Pull request description:
Now that we can use std::variant from the vanilla standard library, drop the third-party boost variant dependency
ACKs for top commit:
fjahr:
Code review ACK faa8f68943
fanquake:
ACK faa8f68943
Tree-SHA512: 6e3aecd33b00c2e31a763f999247944d5b2ce5e3018f1965c516c1000cd08ff6703a8d50fb0be64883153da2925ae72986b8a6b96586db74057bd05d6f4986e6
a7599c80eb test: run mempool_compatibility.py even with wallet disabled (Michael Dietz)
Pull request description:
Another functional test rewritten as proposed in https://github.com/bitcoin/bitcoin/issues/20078
ACKs for top commit:
MarcoFalke:
review ACK a7599c80eb didn't test
Tree-SHA512: cc7a617e5489ed27bbdbdee85a82fa08525375061f7f4524577a6b8ecb340396adac88419b51f513be22ca53edd0a3bd5d572d9f43ffc2c18550b0ef9069d238
a191e23b8e doc: Add release notes (Hennadii Stepanov)
ae749d12dd doc: Add libnatpmp stuff (Hennadii Stepanov)
e28f9be87a ci: Add libnatpmp-dev package to some builds (Hennadii Stepanov)
5a0185b6c9 gui: Add NAT-PMP network option (Hennadii Stepanov)
a39f7336a3 net: Add -natpmp command line option (Hennadii Stepanov)
28acffd9d5 net: Add NAT-PMP to port mapping loop (Hennadii Stepanov)
a8d9f275d0 net: Add libnatpmp support (Hennadii Stepanov)
58e8364dcd gui: Apply port mapping changes on dialog exit (Hennadii Stepanov)
cf151cc68c scripted-diff: Rename UPnP stuff (Hennadii Stepanov)
4e91b1e24d net: Add flags for port mapping protocols (Hennadii Stepanov)
8b50d1b5bb net: Keep trying to use UPnP when -upnp=1 (Hennadii Stepanov)
28e2961fd6 refactor: Replace magic number with named constant (Hennadii Stepanov)
02ccf69dd6 refactor: Move port mapping code to its own module (Hennadii Stepanov)
Pull request description:
Close#11902
This PR is an alternative to:
- #12288
- #15717
To compile with NAT-PMP support on Ubuntu [`libnatpmp-dev`](https://packages.ubuntu.com/source/bionic/libnatpmp) should be available.
Log excerpt:
```
2020-02-05T20:12:28Z [mapport] NAT-PMP: public address = 95.164.65.194
2020-02-05T20:12:28Z [mapport] AddLocal(95.164.65.194:18333,3)
2020-02-05T20:12:28Z [mapport] NAT-PMP: port mapping successful.
```
See: [`libnatpmp`](https://miniupnp.tuxfamily.org/libnatpmp.html)
---
Some follow-ups are out of this PR's scope:
- mention NAT-PMP library in the version message
- ~integrate NAT-PMP into the GUI~ (already [added](https://github.com/bitcoin/bitcoin/pull/18077#issuecomment-589405068))
ACKs for top commit:
laanwj:
Tested and code review ACK a191e23b8e
Tree-SHA512: 10e19267c21bf30f20ff1abfc882d526049f0e790b95e12f109dc2bed7c0aef45de03eaf967f4e667e7509be04f1873a5c508087393d947205f3aab2ad6d7cf1
Open max number of full-relay and block-relay-only connections from a
functional test with different sorts of behaviors to ensure it behaves as
expected.
In the interest of increasing our P2P test coverage, add support to create
full-relay or block-relay-only connections. To support this, a P2P connection
spins up a listening thread & uses a callback to trigger the node initiating
the connection.
Co-authored-by: Anthony Towns <aj@erisian.com.au>
9815332d51 test: Change MuHash Python implementation to match cpp version again (Fabian Jahr)
01297fb3ca fuzz: Add MuHash consistency fuzz test (Fabian Jahr)
b111410914 test: Add MuHash3072 fuzz test (Fabian Jahr)
c122527385 bench: Add Muhash benchmarks (Fabian Jahr)
7b1242229d test: Add MuHash3072 unit tests (Fabian Jahr)
adc708c98d crypto: Add MuHash3072 implementation (Fabian Jahr)
0b4d290bf5 crypto: Add Num3072 implementation (Fabian Jahr)
589f958662 build: Check for 128 bit integer support (Fabian Jahr)
Pull request description:
This is the first split of #18000 which implements the Muhash algorithm and uses it to calculate the UTXO set hash in `gettxoutsetinfo`.
ACKs for top commit:
laanwj:
Code review ACK 9815332d51
Tree-SHA512: 4bc090738f0e3d80b74bdd8122e24a8ce80121120fd37c7e4335a73e7ba4fcd7643f2a2d559e2eebf54b8e3a3bd5f12cfb27ba61ded135fda210a07a233eae45
