onionshare/docs/source/locale/zh_CN/LC_MESSAGES/tor.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) Micah Lee, et al.
# This file is distributed under the same license as the OnionShare package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
#
msgid ""
msgstr ""
"Project-Id-Version: OnionShare 2.3\n"
"Report-Msgid-Bugs-To: onionshare-dev@lists.riseup.net\n"
"POT-Creation-Date: 2023-06-06 13:07+0200\n"
"PO-Revision-Date: 2023-06-10 02:52+0000\n"
"Last-Translator: Chris Nolan <chrisnolan@tutanota.de>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Weblate 4.18-dev\n"
"Generated-By: Babel 2.9.0\n"

#: ../../source/tor.rst:2
msgid "Connecting to Tor"
msgstr "連接到 Tor"

#: ../../source/tor.rst:4
msgid ""
"When OnionShare starts, it will show you a screen asking you to connect to "
"the Tor network."
msgstr "当OnionShare启动时，它会显示一个屏幕，要求您连接到Tor网络。"

#: ../../source/tor.rst:8
msgid ""
"You can toggle on the switch \"Connect to Tor automatically\" before "
"clicking \"Connect to Tor\". This means that next time OnionShare starts, it "
"will automatically connect with its Tor connection settings from the last "
"session, instead of presenting you with the connection options. If the "
"connection fails, you can still try bridges or reconfigure Tor via the "
"\"Network Settings\" button."
msgstr ""
"您可以在点击\"Connect to Tor\"之前，打开\"Connect to Tor "
"automatically\"的开关。这意味着下次OnionShare启动时，它将自动使用上次会话的To"
"r连接设置进行连接，而不会呈现连接选项给您。如果连接失败，"
"您仍然可以尝试使用桥接或通过\"Network Settings\"按钮重新配置Tor。"

#: ../../source/tor.rst:11
msgid ""
"You can click \"Connect to Tor\" to begin the connection process. If there "
"are no problems with your network, including any attempts to block your "
"access to the Tor network, this should hopefully work the first time."
msgstr ""
"您可以点击\"Connect to Tor\"来开始连接。如果您的网络没有任何问题，包括任何试"
"图阻止您访问Tor网络的尝试，这应该能够在第一次尝试时成功。"

#: ../../source/tor.rst:13
msgid ""
"Or, if you want to manually configure Bridges or other Tor settings before "
"you connect, you can click \"Network Settings\"."
msgstr "或者，如果您希望在连接之前手动配置桥接或其他Tor设置，您可以点击\"Network "
"Settings\"。"

#: ../../source/tor.rst:16
msgid "Automatic censorship circumvention"
msgstr "自动绕过网络审查"

#: ../../source/tor.rst:18
msgid ""
"When you click \"Connect to Tor\", if OnionShare fails to connect, it might "
"be because Tor is censored in your country or on your local network."
msgstr "当您点击\"Connect to Tor\"时，如果OnionShare无法连接，可能是因为Tor在您所在的"
"国家或本地网络中受到审查限制。"

#: ../../source/tor.rst:20
msgid "If this occurs, you will have these choices:"
msgstr "如果出现这种情况，您将有以下选择："

#: ../../source/tor.rst:22
msgid "Try again without a bridge"
msgstr "请尝试在没有使用网桥的情况下再次连接"

#: ../../source/tor.rst:23
msgid ""
"Automatically determine my country from my IP address for bridge settings"
msgstr ""

#: ../../source/tor.rst:24
msgid "Manually select my country for bridge settings"
msgstr ""

#: ../../source/tor.rst:28
msgid ""
"If you choose the \"Try again without a bridge\" option, OnionShare will "
"retry connecting to Tor like normal, without attempting to bypass censorship."
msgstr ""

#: ../../source/tor.rst:30
msgid ""
"The other two options will attempt to automatically bypass censorship using "
"Tor bridges. If your network provider is blocking access to the Tor network, "
"you can hopefully still connect to a Tor bridge, which will then connect you "
"to the Tor network, circumventing the censorship. Both of these options use "
"the Tor Project's Censorship Circumvention API to provide you with bridge "
"settings that should work for you. OnionShare will temporarily use the `Meek "
"<https://gitlab.torproject.org/legacy/trac/-/wikis/doc/meek/>`_ domain-"
"fronting proxy to make a non-Tor connection from your computer to Tor's "
"Censorship Circumvention API. The Meek proxy hides the fact that you are "
"trying to find a way to connect to Tor."
msgstr ""

#: ../../source/tor.rst:36
msgid ""
"If you choose \"Automatically determine my country from my IP address for "
"bridge settings\", the Censorship Circumvention API will consider your IP "
"address (yes, your real IP address) to determine what country you might "
"reside in. Based on the country information, the API will try to "
"automatically find bridges that suit your location."
msgstr ""

#: ../../source/tor.rst:41
msgid ""
"If you choose \"Manually select my country for bridge settings\", the "
"Censorship API will find the bridges that suit the country that you "
"specified."
msgstr ""

#: ../../source/tor.rst:46
msgid "How automatic censorship circumvention works"
msgstr ""

#: ../../source/tor.rst:48
msgid ""
"If the Censorship Circumvention API finds bridges that it believes will suit "
"you, OnionShare will try to reconnect to Tor using those bridges. If the API "
"does not find any bridges for your location, OnionShare will ask the API for "
"\"fallback\" options, and then try to reconnect using those."
msgstr ""

#: ../../source/tor.rst:50
msgid ""
"If for some reason OnionShare fails to connect to the Censorship API itself, "
"or if the API returns an error message, OnionShare will attempt to use the "
"obfs4 built-in bridges."
msgstr ""

#: ../../source/tor.rst:52
msgid ""
"It's important to note that the requests to the Censorship Circumvention API "
"do not go over the Tor network (because if you could connect to Tor already, "
"you wouldn't need to connect to the API)."
msgstr ""

#: ../../source/tor.rst:54
msgid ""
"Even though it's hard for an adversary to discover where the Meek request is "
"going, this may still be risky for some users. Therefore, it is an opt-in "
"feature. The use of Meek and non-torified network requests are limited only "
"to making one or two requests to the Censorship Circumvention API. Then Meek "
"is stopped, and all further network requests happen over the Tor network."
msgstr ""

#: ../../source/tor.rst:56
msgid ""
"If you are uncomfortable with making a request that doesn't go over the Tor "
"network, you can click \"Network Settings\" (or the Settings icon in the "
"bottom right corner, followed by the Tor Settings tab in the screen that "
"appears), and manually configure bridges. After you save any bridge "
"settings, OnionShare will try to reconnect using those bridges."
msgstr ""

#: ../../source/tor.rst:59
msgid "Manually configure Tor settings"
msgstr ""

#: ../../source/tor.rst:61
msgid ""
"You can get to the Tor settings by clicking \"Network Settings\" on the "
"welcome screen, or by clicking the \"⚙\" icon in the bottom-right corner of "
"the application, and then switch to the Tor Settings tab in the screen that "
"appears."
msgstr ""

#: ../../source/tor.rst:65
msgid ""
"Here are the different ways you can configure OnionShare to connect to Tor:"
msgstr ""

#: ../../source/tor.rst:68
msgid "Use the Tor version built into OnionShare"
msgstr ""

#: ../../source/tor.rst:70
msgid ""
"This is the default, simplest and most reliable way that OnionShare connects "
"to Tor. For this reason, it's recommended for most users."
msgstr ""
"此预设是让 OnionShare 连上 Tor 最简单可靠的方法，因此推荐给大多数使用者。"

#: ../../source/tor.rst:73
msgid ""
"When you open OnionShare, it launches an already configured ``tor`` process "
"in the background for OnionShare to use. It doesn't interfere with other "
"``tor`` processes on your computer, so you can use the Tor Browser or the "
"system ``tor`` on their own."
msgstr ""
"打开 OnionShare 时会在启动后台已设置好的 ``tor``进程，这个进程不会介入电脑中"
"其它 tor 进程，所以Tor 浏览器或系统会使用自己的 tor 进程。"

#: ../../source/tor.rst:76
msgid "**Using bridges**"
msgstr ""

#: ../../source/tor.rst:78
msgid ""
"To use a bridge, you must select \"Use the Tor version built into OnionShare"
"\" and check the \"Use a bridge\" checkbox."
msgstr ""

#: ../../source/tor.rst:80
msgid ""
"Try using a built-in bridge first. Using `obfs4` or `snowflake` bridges is "
"recommended over using `meek-azure`."
msgstr ""

#: ../../source/tor.rst:84
msgid ""
"If using a built-in bridge doesn't work, you can request a bridge from "
"torproject.org. You will have to solve a CAPTCHA in order to request a "
"bridge. (This makes it more difficult for governments or ISPs to block "
"access to Tor bridges.)"
msgstr ""

#: ../../source/tor.rst:88
msgid ""
"You also have the option of using a bridge that you learned about from a "
"trusted source."
msgstr ""

#: ../../source/tor.rst:91
msgid "Attempt auto-configuration with Tor Browser"
msgstr "图试自定配置 Tor 浏览器"

#: ../../source/tor.rst:93
#, fuzzy
msgid ""
"If you have `downloaded the Tor Browser <https://www.torproject.org>`_ and "
"don't want two ``tor`` processes running, you can use the ``tor`` process "
"from the Tor Browser. Keep in mind you need to keep Tor Browser open in the "
"background while you're using OnionShare for this to work."
msgstr ""
"如已下载 Tor 浏览器 <https://www.torproject.org>`_ 不想要在系统中运行两个 "
"``tor`` 进程，可只用 Tor 浏览器的 ``tor`` 进程。但记住在使用 OnionShare 时，"
"必须打开 Tor 浏览器，OnionShare 才能运作。"

#: ../../source/tor.rst:97
msgid "Using a system ``tor`` in Windows"
msgstr "在 Windows 使用 ``tor`` 系统"

#: ../../source/tor.rst:99
msgid ""
"This is fairly advanced. You'll need to know how edit plaintext files and do "
"stuff as an administrator."
msgstr "这非常高端，需要会编辑纯文本文件与管理员工作权限。"

#: ../../source/tor.rst:101
#, fuzzy
#| msgid ""
#| "Download the Tor Windows Expert Bundle `from <https://www.torproject.org/"
#| "download/tor/>`_. Extract the compressed file and copy the extracted "
#| "folder to ``C:\\Program Files (x86)\\`` Rename the extracted folder with "
#| "``Data`` and ``Tor`` in it to ``tor-win32``."
msgid ""
"Download the Tor Windows Expert Bundle `from the Tor website <https://www."
"torproject.org/download/tor/>`_. Extract the compressed file and copy the "
"extracted folder to ``C:\\Program Files (x86)\\`` Rename the extracted "
"folder with ``Data`` and ``Tor`` in it to ``tor-win32``."
msgstr ""
"从 <https://www.torproject.org/download/tor/>`_下载 Tor Windows 专家包 `，解"
"压缩文件将其文件夹拷贝到``C:\\Program Files (x86)\\``底下， 将原文件夹名称为"
"``Data`` and ``Tor`` 重命名为 ``tor-win32``。"

#: ../../source/tor.rst:105
msgid ""
"Make up a control port password. (Using 7 words in a sequence like "
"``comprised stumble rummage work avenging construct volatile`` is a good "
"idea for a password.) Now open a command prompt (``cmd``) as an "
"administrator, and use ``tor.exe --hash-password`` to generate a hash of "
"your password. For example::"
msgstr ""
"設一个控制端密码 (例如使用7 个连续单字, 像``comprised stumble rummage work "
"avenging construct volatile``就是个好密码。)以管理员帐户打开命令行 "
"(``cmd``)，使用``tor.exe --hash-password`` 指令产生密码哈希，例如::"

#: ../../source/tor.rst:112
msgid ""
"The hashed password output is displayed after some warnings (which you can "
"ignore). In the case of the above example, it is "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."
msgstr ""
"在一串可忽视的警告之后，会出现哈希密码结果，例如在上述示范中密码为 "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."

#: ../../source/tor.rst:114
msgid ""
"Now create a new text file at ``C:\\Program Files (x86)\\tor-win32\\torrc`` "
"and put your hashed password output in it, replacing the "
"``HashedControlPassword`` with the one you just generated::"
msgstr ""
"在``C:\\Program Files (x86)\\tor-win32\\torrc`` 创建新文本档，存入新生成的哈"
"希密码並替换文件 ``HashedControlPassword`` ::"

#: ../../source/tor.rst:119
msgid ""
"In your administrator command prompt, install ``tor`` as a service using the "
"appropriate ``torrc`` file you just created (as described in `<https://2019."
"www.torproject.org/docs/faq.html.en#NTService>`_). Like this::"
msgstr ""
"在管理员命令行中 ，安装``tor``服务可利用新建的``torrc`` 予以适当指令 (介绍于"
"`<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_). 像这样::"

#: ../../source/tor.rst:123
msgid "You are now running a system ``tor`` process in Windows!"
msgstr "现已顺利在 Windows 运行``tor``进程!"

#: ../../source/tor.rst:125
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor Settings "
"tab. Under \"How should OnionShare connect to Tor?\" choose \"Connect using "
"control port\", and set \"Control port\" to ``127.0.0.1`` and \"Port\" to "
"``9051``. Under \"Tor authentication settings\" choose \"Password\" and set "
"the password to the control port password you picked above. Click the \"Test "
"Connection to Tor\" button. If all goes well, you should see \"Connected to "
"the Tor controller\"."
msgstr ""

#: ../../source/tor.rst:134
msgid "Using a system ``tor`` in macOS"
msgstr "macOS 使用 ``tor``系统"

#: ../../source/tor.rst:136
msgid ""
"First, install `Homebrew <https://brew.sh/>`_ if you don't already have it, "
"and then install Tor::"
msgstr "如果没有`Homebrew <https://brew.sh/>`请先安装，再安装 Tor::"

#: ../../source/tor.rst:140
msgid "Now configure Tor to allow connections from OnionShare::"
msgstr "现在调配 Tor 以便让 OnionShare 可连接:"

#: ../../source/tor.rst:147
msgid "And start the system Tor service::"
msgstr "启动系统的 Tor 服务::"

#: ../../source/tor.rst:151
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor Settings "
"tab. Under \"How should OnionShare connect to Tor?\" choose \"Connect using "
"socket file\", and set the socket file to be ``/usr/local/var/run/tor/"
"control.socket``. Under \"Tor authentication settings\" choose \"No "
"authentication, or cookie authentication\". Click the \"Test Connection to "
"Tor\" button."
msgstr ""

#: ../../source/tor.rst:157 ../../source/tor.rst:177
msgid "If all goes well, you should see \"Connected to the Tor controller\"."
msgstr "如果一切顺利，会出现\"Connected to the Tor controller\"消息。"

#: ../../source/tor.rst:160
msgid "Using a system ``tor`` in Linux"
msgstr "Linux 使用 ``tor``系统"

#: ../../source/tor.rst:162
msgid ""
"First, install the ``tor`` package. If you're using Debian, Ubuntu, or a "
"similar Linux distro, It is recommended to use the Tor Project's `official "
"repository <https://support.torproject.org/apt/tor-deb-repo/>`_."
msgstr ""
"首先安装 ``tor``包。如果操作系统为 Debian, Ubuntu 或其它相似发行版，建议使用 "
"Tor Project 官方代码保存库 <https://support.torproject.org/apt/tor-deb-repo/"
">`_."

#: ../../source/tor.rst:164
msgid ""
"Next, add your user to the group that runs the ``tor`` process (in the case "
"of Debian and Ubuntu, ``debian-tor``) and configure OnionShare to connect to "
"your system ``tor``'s control socket file."
msgstr ""
"接着将用户加入可运行``tor``进程的群组(Debian/ Ubuntu 则使用 ``debian-tor``)，"
"设置 OnionShare 连接系统的``tor`` control socket 文档。"

#: ../../source/tor.rst:166
msgid ""
"Add your user to the ``debian-tor`` group by running this command (replace "
"``username`` with your actual username)::"
msgstr ""
"要将用户加到``debian-tor`` 群组请运行以下命令(请把 ``username`` 改成你的 "
"username)::"

#: ../../source/tor.rst:170
msgid ""
"Reboot your computer. After it boots up again, open OnionShare, click the \"⚙"
"\" icon in it, and switch to the Tor Settings tab. Under \"How should "
"OnionShare connect to Tor?\" choose \"Connect using socket file\". Set the "
"socket file to be ``/var/run/tor/control``. Under \"Tor authentication "
"settings\" choose \"No authentication, or cookie authentication\". Click the "
"\"Test Connection to Tor\" button."
msgstr ""