Using the zmq notifications to avoid excessive mempool polling can be difficult
given the current notifications available. It announces all transactions
being added to mempool or included in blocks, but announces no evictions
and gives no indication if the transaction is in the mempool or a block.
Block notifications for zmq are also substandard, in that it only announces
block tips, while all block transactions are still announced.
This commit adds a unified stream which can be used to closely track mempool:
1) getrawmempool to fill out mempool knowledge
2) if txhash is announced, add or remove from set
based on add/remove flag
3) if blockhash is announced, get block txn list,
remove from those transactions local view of mempool
4) if we drop a sequence number, go to (1)
The mempool sequence number starts at the value 1, and
increments each time a transaction enters the mempool,
or is evicted from the mempool for any reason, including
block inclusion. The mempool sequence number is published
via ZMQ for any transaction-related notification.
These features allow for ZMQ/RPC consumer to track mempool
state in a more exacting way, without unnecesarily polling
getrawmempool. See interface_zmq.py::test_mempool_sync for
example usage.
No longer create a default wallet. The default wallet will still be
loaded if it exists and not other wallets were specified (anywhere,
including settings.json, bitcoin.conf, and command line).
Tests are updated to be started with -wallet= if they need the default
wallet.
Added test to wallet_startup.py testing that no default wallet is
created and that it is loaded if it exists and no other wallets were
specified.
7bf6dfbb48 wallet: Remove path checking code from bitcoin-wallet tool (Russell Yanofsky)
77d5bb72b8 wallet: Remove path checking code from createwallet RPC (Russell Yanofsky)
a987438e9d wallet: Remove path checking code from loadwallet RPC (Russell Yanofsky)
8b5e7297c0 refactor: Pass wallet database into CWallet::Create (Russell Yanofsky)
3c815cfe54 wallet: Remove Verify and IsLoaded methods (Russell Yanofsky)
0d94e60625 refactor: Use DatabaseStatus and DatabaseOptions types (Russell Yanofsky)
b5b414151a wallet: Add MakeDatabase function (Russell Yanofsky)
288b4ffb6b Remove WalletLocation class (Russell Yanofsky)
Pull request description:
Get rid of file path handling in wallet application code and move it down to database layer.
There is no change in behavior except for some changed error messages.
Motivation for this change is to make code more understandable, but also to prepare for adding SQLite support in #19077 so SQLite implementation can be contained at the database layer and wallet loading code does not need to become more complicated.
ACKs for top commit:
achow101:
ACK 7bf6dfbb48
meshcollider:
Code re-review and functional test run ACK 7bf6dfbb48
Tree-SHA512: 23ad18324c9e8947f0cf88a3734c2e9fb25536b2cb4d552cf5d1a4ade320fbffb73bb2d1b3a99585c11630aa7092e0fcfc2dd4fe65b91e3a54161433a5cd13cb
This removes a source of complexity and indirection that makes it harder to
understand path checking code. Path checks will be simplified in upcoming
commits.
There is no change in behavior in this commit other than a slightly more
descriptive error message in `loadwallet` if the default "" wallet can't be
found. (The error message is improved more in upcoming commit "wallet: Remove
path checking code from loadwallet RPC".)
Enable the GUI to also use the load_on_startup feature.
Wallets loaded in the GUI always have load_on_startup=true.
When they are unloaded from the GUI, load_on_startup=false.
To facilitate this change, UpdateWalletSetting is moved into the wallet
module and called from within LoadWallet, RemoveWallet, and
Createwallet. This change does not actually touch the GUI code but
rather the wallet functions that are shared between the GUI and RPC.
Add WalletClient interface so node interface is cleaner and don't need
wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate
global wallet variables like ::vpwallets, because createWallet(), loadWallet(),
getWallets(), etc methods called by the GUI need a way to get a reference to
the list of open wallets if it is no longer a global variable.
Also tweaks splash screen registration for load wallet events to be delayed
until after wallet client is created.
Add AppInitInterfaces function so wallet chain and chain client interfaces are
created earlier during initialization. This is needed in the next commit to
allow the gui splash screen to be able to register for wallet events through a
dedicated WalletClient interface instead managing wallets indirectly through
the Node interface. This only works if the wallet client interface is created
before the splash screen needs to use it.
Change gui code to use gArgs, Params() functions directly instead of going
through interfaces::Node.
Remotely accessing bitcoin-node ArgsManager from bitcoin-gui works fine in
https://github.com/bitcoin/bitcoin/pull/10102, when bitcoin-gui spawns a new
bitcoin-node process and controls its startup, but for bitcoin-gui to support
-ipcconnect option in https://github.com/bitcoin/bitcoin/pull/19461 and connect
to an existing bitcoin-node process, it needs ability to parse arguments itself
before connecting out.
This change also simplifies https://github.com/bitcoin/bitcoin/pull/10102 a
bit, by making the bitcoin-gui -> bitcoin-node startup sequence more similar to
the bitcoin-node -> bitcoin-wallet startup sequence where the parent process
parses arguments and passes them to the child process instead of the parent
process using the child process to parse arguments.
This maintains a persistent list of wallets stored in settings that will
automatically be loaded on startup. Being able to load a wallet automatically
on startup will be more useful in the GUI when the option to create wallets is
added in #15006, but it's reasonable to expose this feature by RPC as well.
edc316020e test: Remove duplicate NodeContext hacks (Russell Yanofsky)
Pull request description:
Qt tests currently are currently using two NodeContext structs at the same time, one in interfaces::NodeImpl::m_context, and the other in BasicTestingSetup::m_node, and the tests have hacks transferring state between them.
Fix this by getting rid of the NodeImpl::m_context struct and making it a pointer. This way a common BitcoinApplication object can be used for all qt tests, but they can still have their own testing setups.
Non-test code is changing but non-test behavior is still the same as before.
Motivation for this PR is to be able to remove the "std::move(test.m_node.connman)" and mempool hacks for swapping individual NodeContext members in Qt tests, because followup PR #19099 adds yet another member (wallet_client) that needs to be swapped. After this change, the whole NodeContext struct can be swapped instead of individual members, so the workarounds are less fragile and invasive.
ACKs for top commit:
MarcoFalke:
crACK edc316020e🌮
promag:
ACK edc316020e.
Tree-SHA512: c1650e4127f43a4020304ca7c13b5d9122fb5723aacd8fa1cf855d03c6052fcfb7685810aa2a5ef708561015f0022fecaacbad479295104ca45d2c17579466a4
9c69cfe4c5 Add <datadir>/settings.json persistent settings storage. (Russell Yanofsky)
eb682c5700 util: Add ReadSettings and WriteSettings functions (Russell Yanofsky)
Pull request description:
Persistent settings are used in followup PRs #15936 to unify gui settings between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to the loadwallet RPC and maintain a dynamic list of wallets that should be loaded on startup that also can be shared between bitcoind and bitcoin-qt.
ACKs for top commit:
MarcoFalke:
Approach re-ACK 9c69cfe4c5🌾
jnewbery:
utACK 9c69cfe4c5
Tree-SHA512: 39fcc6051717117c9141e934de1d0d3f739484be4685cdf97d54de967c8c816502b4fd0de12114433beaa5c5b7060c810fd8ae4e2b3ce7c371eb729ac01ba2e1
Qt tests currently are currently using two NodeContext structs at the same
time, one in interfaces::NodeImpl::m_context, and the other in
BasicTestingSetup::m_node, and the tests have hacks transferring state between
them.
Fix this by getting rid of the NodeImpl::m_context struct and making it a
pointer. This way a common BitcoinApplication object can be used for all qt
tests, but they can still have their own testing setups.
Non-test code is changing but non-test behavior is still the same as before.
Motivation for this PR is to be able to remove the
"std::move(test.m_node.connman)" and mempool hacks for swapping individual
NodeContext members in Qt tests, because followup PR #19099 adds yet another
member (wallet_client) that needs to be swapped. After this change, the whole
NodeContext struct can be swapped instead of individual members, so the
workarounds are less fragile and invasive.
Persistent settings are used in followup PRs #15936 to unify gui settings
between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to
the loadwallet RPC and maintain a dynamic list of wallets that should be loaded
on startup that also can be shared between bitcoind and bitcoin-qt.
fa927ff884 Enable Wswitch for OutputType (MarcoFalke)
faddad71f6 Remove confusing OutputType::CHANGE_AUTO (MarcoFalke)
fa2eb38352 interfaces: Remove unused getDefaultChangeType (MarcoFalke)
Pull request description:
`OutputType::CHANGE_AUTO` is problematic for several reasons:
* An output that is not change must never be described by `CHANGE_AUTO`. Simply allowing that option makes the code confusing and review harder than it needs to be.
* To make review even harder, `CHANGE_AUTO` requires `-Wswitch` to be disabled for `OutputType`
Fix both issues by removing `CHANGE_AUTO` and then enabling `-Wswitch` for `OutputType`
ACKs for top commit:
promag:
Code review ACK fa927ff884.
laanwj:
Code review ACK fa927ff884
Tree-SHA512: 24fd809757aa343866c94dafe9a7130b50cda4f77c97666d407f99b813f75b115a7d8e688a6bc2a737e87cba64ddd4e43f2b3c5538fd35fabb5845807bb39134
In FillPSBT, optionally report the number of inputs we successfully
signed, as an out parameter. If "sign" is false, instead report the
number of inputs for which GetSigningProvider does not return nullptr.
(This is a potentially overbroad estimate of inputs we could sign.)
fs.cpp:35:17: error: no member named 'strerror' in namespace 'std'
return std::strerror(errno);
~~~~~^
fs.cpp:49:9: error: use of undeclared identifier 'close'
close(fd);
^
2 errors generated.
./interfaces/chain.h:265:55: error: ‘std::function’ has not been declared
virtual void rpcRunLater(const std::string& name, std::function<void()> fn, int64_t seconds) = 0;
^~~
4a7253ab6c Remove g_rpc_chain global (Russell Yanofsky)
e783197bf0 refactor: replace RegisterWalletRPCCommands with GetWalletRPCCommands (Russell Yanofsky)
Pull request description:
Replace with RPC request reference to new WalletContext struct similar to the existing NodeContext struct and reference.
This PR is a followup to #18740 removing the g_rpc_node global.
Some later PRs will follow this up and move more wallet globals to the WalletContext struct.
ACKs for top commit:
MarcoFalke:
ACK 4a7253ab6c🎋
ariard:
Code Review ACK 4a7253a, feel free to ignore comment it's super nit.
Tree-SHA512: 5bb5561c89f81811ca5232a58bf450e230d4218e62471c03227d142395fd36131672e99cb88329b33b9680a235db01e8b9d1c1e2a18288349e57205528deabab
7eaf86d3bf trivial: Suggested cleanups to surrounding code (Russell Yanofsky)
b604c5c8b5 wallet: Minimal fix to restore conflicted transaction notifications (Russell Yanofsky)
Pull request description:
This fix is a based on the fix by Antoine Riard (ariard) in https://github.com/bitcoin/bitcoin/pull/18600.
Unlike that PR, which implements some new behavior, this just restores previous wallet notification and status behavior for transactions removed from the mempool because they conflict with transactions in a block. The behavior was accidentally changed in two `CWallet::BlockConnected` updates: a31be09bfd and 7e89994133 from https://github.com/bitcoin/bitcoin/pull/16624, causing issue https://github.com/bitcoin/bitcoin/issues/18325.
The change here could be improved and replaced with a more comprehensive cleanup, so it includes a detailed comment explaining future considerations.
Fixes#18325
Co-authored-by: Antoine Riard (ariard)
ACKs for top commit:
jonatack:
Re-ACK 7eaf86d3bf
ariard:
ACK 7eaf86d, reviewed, built and ran tests.
MarcoFalke:
ACK 7eaf86d3bf🍡
Tree-SHA512: 9a1efe975969bb522a9dd73c41064a9348887cb67883cd92c6571fd2df4321b9f4568363891abdaae14a3b9b168ef8142e95c373fc04677e46289b251fb84689
da73f1513a qt: Fix shutdown when waitfor* cmds are called from RPC console (Hennadii Stepanov)
Pull request description:
On master (7eed413e72), if the GUI has been started with`-server=1`, `bitcoin-qt` hangs on shutdown during calling any of the `waitfor*` commands in the GUI RPC console.
This PR suggests minimal changes to fix this bug.
Fix#17495
ACKs for top commit:
jonasschnelli:
utACK da73f1513a
Tree-SHA512: 469f5332945a5f2c57d19336cda5df79b123ccc494aea6d58a85eb1293be52708b2b9c5bb6bc2c402a90b7b4e9e8d7ab8fe84cf201cf7ce612c9290c57e43681
Replace with RPC request reference to new WalletContext struct similar to the
existing NodeContext struct and reference.
This PR is a followup to 25ad2c623ahttps://github.com/bitcoin/bitcoin/pull/18740 removing the g_rpc_node global.
Some later PRs will follow this up and move more wallet globals to the
WalletContext struct.
Co-authored-by: João Barbosa <joao.paulo.barbosa@gmail.com>
b3f7f375ef refactor: Remove g_rpc_node global (Russell Yanofsky)
ccb5059ee8 scripted-diff: Remove g_rpc_node references (Russell Yanofsky)
6fca33b2ed refactor: Pass NodeContext to RPC and REST methods through util::Ref (Russell Yanofsky)
691c817b34 Add util::Ref class as temporary alternative for c++17 std::any (Russell Yanofsky)
Pull request description:
This PR removes the `g_rpc_node` global, to get same benefits we see removing other globals and make RPC code more testable, modular, and reusable.
This uses a hybrid of the approaches suggested in #17548. Instead of using `std::any`, which isn't available in c++11, or `void*`, which isn't type safe, it uses a small new `util::Ref` helper class, which acts like a simplified `std::any` that only holds references, not values.
Motivation for writing this was to provide an simpler alternative to #18647 by Harris Brakmić (brakmic) which avoids some shortcomings of that PR (https://github.com/bitcoin/bitcoin/pull/18647#issuecomment-617878826)
ACKs for top commit:
MarcoFalke:
re-ACK b3f7f375ef, only change is adding back const and more tests 🚾
ajtowns:
ACK b3f7f375ef
Tree-SHA512: 56292268a001bdbe34d641db1180c215351503966ff451e55cc96c9137f1d262225d7d7733de9c9da7ce7d7a4b34213a98c2476266b58c89dbbb0f3cb5aa5d70
d3a56be77a Revert "gui: Avoid Wallet::GetBalance in WalletModel::pollBalanceChanged" (Russell Yanofsky)
bf0a510981 gui: Avoid wallet tryGetBalances calls before TransactionChanged or BlockTip notifications (Russell Yanofsky)
2bc9b92ed8 Cancel wallet balance timer when shutdown requested (Russell Yanofsky)
83f69fab3a Switch transaction table to use wallet height not node height (Russell Yanofsky)
Pull request description:
Main commit `gui: Avoid wallet tryGetBalances calls` is one-line change to `WalletModel::pollBalanceChanged` that returns early if there hasn't been a new `TransactionChanged` or `BlockTip` notification since the previous poll call. This is the same behavior that was implemented in #18160, now implemented in a simpler way.
The other commits are a straight revert of #18160, and two tweaks to avoid relying on `WalletModel::m_client_model` lifetime which were causing travis failures with earlier versions of this PR.
Motivation for this change is to be able to revert #18160 and cut down on unnecessary cross-process calls that happen when #18160 is combined with #10102
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
ACKs for top commit:
jonasschnelli:
utACK d3a56be77a
Tree-SHA512: 3cd31ca515e77c3bd7160d3f1ea0dce5050d4038b2aa441b6f66b8599bd413d81ca5542a197806e773d6092dd1d26830932b1cecbc95298b1f1ab41099e2f12f
This fix is a based on the fix by Antoine Riard <ariard@student.42.fr> in
https://github.com/bitcoin/bitcoin/pull/18600.
Unlike that PR, which implements some new behavior, this just restores previous
wallet notification and status behavior for transactions removed from the
mempool because they conflict with transactions in a block. The behavior was
accidentally changed in two `CWallet::BlockConnected` updates:
a31be09bfd and
7e89994133 from
https://github.com/bitcoin/bitcoin/pull/16624, causing issue
https://github.com/bitcoin/bitcoin/issues/18325.
The change here could be improved and replaced with a more comprehensive
cleanup, so it includes a detailed comment explaining future considerations.
Fixes#18325
Co-authored-by: Antoine Riard <ariard@student.42.fr>
