232f96f5c8 doc: Add release notes for -avoidpartialspends (Karl-Johan Alm)
e00b4699cc clean-up: Remove no longer used ivars from CInputCoin (Karl-Johan Alm)
43e04d13b1 wallet: Remove deprecated OutputEligibleForSpending (Karl-Johan Alm)
0128121101 test: Add basic testing for wallet groups (Karl-Johan Alm)
59d6f7b4e2 wallet: Switch to using output groups instead of coins in coin selection (Karl-Johan Alm)
87ebce25d6 wallet: Add output grouping (Karl-Johan Alm)
bb629cb9dc Add -avoidpartialspends and m_avoid_partial_spends (Karl-Johan Alm)
65b3eda458 wallet: Add input bytes to CInputCoin (Karl-Johan Alm)
a443d7a0ca moveonly: CoinElegibilityFilter into coinselection.h (Karl-Johan Alm)
173e18a289 utils: Add insert() convenience templates (Karl-Johan Alm)
Pull request description:
This PR adds an optional (off by default) `-avoidpartialspends` flag, which changes coin select to use output groups rather than outputs, where each output group corresponds to all outputs with the same destination.
It is a privacy improvement, as each time you spend some output, any other output that is publicly associated with the destination (address) will also be spent at the same time, at the cost of fee increase for cases where coin select without group restriction would find a more optimal set of coins (see example below).
For regular use without address reuse, this PR should have no effect on the user experience whatsoever; it only affects users who, for some reason, have multiple outputs with the same destination (i.e. address reuse).
Nodes with this turned off will still try to avoid partial spending, if the fee of the resulting transaction is not greater than the fee of the original transaction.
Example: a node has four outputs linked to two addresses `A` and `B`:
* 1.0 btc to `A`
* 0.5 btc to `A`
* 1.0 btc to `B`
* 0.5 btc to `B`
The node sends 0.2 btc to `C`. Without `-avoidpartialspends`, the following coin selection will occur:
* 0.5 btc to `A` or `B` is picked
* 0.2 btc is output to `C`
* 0.3 - fee is output to (unique change address)
With `-avoidpartialspends`, the following will instead happen:
* Both of (0.5, 1.0) btc to `A` or `B` is picked (one or the other pair)
* 0.2 btc is output to `C`
* 1.3 - fee is output to (unique change address)
As noted, the pro here is that, assuming nobody sends to the address after you spend from it, you will only ever use one address once. The con is that the transaction becomes slightly larger in this case, because it is overpicking outputs to adhere to the no partial spending rule.
This complements #10386, in particular it addresses @luke-jr and @gmaxwell's concerns in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-300667926 and https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381.
Together with `-avoidreuse`, this fully addresses the concerns in #10065 I believe.
Tree-SHA512: 24687a4490ba59cf4198ed90052944ff4996653a4257833bb52ed24d058b3e924800c9b3790aeb6be6385b653b49e304453e5d7ff960e64c682fc23bfc447621
a3fa4d6a6a QA: Fix bug in -usecli logic that converts booleans to non-lowercase strings (Jonas Schnelli)
4704e5f074 [QA] add createwallet disableprivatekey test (Jonas Schnelli)
c7b8f343e9 [Qt] Disable creating receive addresses when private keys are disabled (Jonas Schnelli)
2f15c2bc20 Add disable privatekeys option to createwallet (Jonas Schnelli)
cebefba085 Add option to disable private keys during internal wallet creation (Jonas Schnelli)
9995a602a6 Add facility to store wallet flags (64 bits) (Jonas Schnelli)
Pull request description:
This mode ('createwallet {"disableprivatekeys": true}') is intended for a sane pure watch-only mode, ideal for a use-case where one likes to use Bitcoin-Core in conjunction with a hardware-wallet or another solutions for cold-storage.
Since we have support for custom change addresses in `fundrawtransaction`, pure watch-only wallets including coin-selection are possible and do make sense for some use cases.
This new mode disables all forms of private key generation and ensure that no mix between hot and cold keys are possible.
Tree-SHA512: 3ebe7e8d54c4d4e5f790c348d4c292d456f573960a5b04d69ca5ef43a9217c7e7671761c6968cdc56f9a8bc235f3badd358576651af9f10855a0eb731f3fc508
cd3f4aa808 Decouple wallet version from client version (Andrew Chow)
Pull request description:
Instead of comparing version numbers in the wallet to the client version number, compare them to the latest supported wallet version in the client. This allows for wallet version numbers to be unrelated to the client version number.
Tree-SHA512: 69c3e1f45a40bde01d622d504a803fea32fc14e2e27b14b0729725349d8592d56ebca26fd06f117fd6f5164fb4ce980122751b6370f6e25f1a947dbdf4143ddd
89e70f9d7f Fix that CWallet::AbandonTransaction would only traverse one level (Ben Woosley)
Pull request description:
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input `hashTx`
rather than the current `now` tx.
Tree-SHA512: df068b49637d299ad73237c7244005fe5aa966d6beae57aff12e6948f173d9381e1b5d08533f7e3a1416991ed57f9f1f7b834057141d85c07dc60bb1f0872cea
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
702ae1e21a [RPC] [wallet] allow getbalance to use min_conf and watch_only without accounts. (John Newbery)
cf15761f6d [wallet] GetBalance can take a min_depth argument. (John Newbery)
0f3d6e9ab7 [wallet] factor out GetAvailableWatchOnlyBalance() (John Newbery)
7110c830f8 [wallet] deduplicate GetAvailableCredit logic (John Newbery)
ef7bc8893c [wallet] Factor out GetWatchOnlyBalance() (John Newbery)
4279da4785 [wallet] GetBalance can take an isminefilter filter. (John Newbery)
Pull request description:
#12953 inadvertently removed the functionality to call `getbalance "*" <int> <bool>` to get the wallet's balance with either minconfs or include_watchonly.
This restores that functionality (when `-deprecatedrpc=accounts`), and also makes it possible to call ``getbalance minconf=<int> include_watchonly=<bool>` when accounts are not being used.
Tree-SHA512: 67e84de9291ed6d34b23c626f4dc5988ba0ae6c99708d02b87dd3aaad3f4b6baa6202a66cc2dadd30dd993a39de8036ee920fcaa8cbb1c5dfe606e6fac183344
3c292cc19 ScanforWalletTransactions should mark input txns as dirty (Gregory Sanders)
Pull request description:
I'm hitting a corner case in my mainnet wallet where I load a restore a wallet, call `rescanblockchain` from RPC, and it's "double counting" an output I've sent to myself since currently it never marks input transactions as dirty. This is fixed by a restart of the wallet.
Note that this only happens with keys with birthdate *after* the blocks containing the spent funds which gets scanned on startup, so it's hard to test without a set seed function.
Tree-SHA512: ee1fa152bb054b57ab4c734e355df10d241181e0372c81d583be61678fffbabe5ae60b09b05dc1bbbcfb4838df9d8538791d4c1d80a09b84d78ad2f50dcb0a61
According to my understanding, it should not be possible for coinbase
transactions to be conflicting, thus it should not be possible for
GetDepthInMainChain to return a negative result. If it did, this would
also result in innacurate results for GetBlocksToMaturity due to the
math therein. asserting ensures accuracy.
Prior to this change, it would mark only the first layer of
child transactions abandoned, due to always following the input hashTx
rather than the current now tx.
I thought we had removed this a long time ago, TBH, its really
confusing feedback to users that we display whether a tx was
broadcast to immediate neighbor nodes, given that has little
indication of whether the tx propagated very far.
Makes AddAndGetDestinationForScript use a generic CKeyStore rather than
the wallet, and makes it always add the script to the keystore, rather
than only adding related (redeem) scripts.
2f1a30c63 Fix MAX_STANDARD_TX_WEIGHT check (Johnson Lau)
Pull request description:
As suggested by the constant name and its comment in policy.h, a transaction with a weight of exactly MAX_STANDARD_TX_WEIGHT should be allowed. Users could be confused.
Tree-SHA512: af417de1c6a2e6796ebbb39aa0caad8764302ded155cb1bbfbe457e4567c199cc53256189832b17d4aeec369e190b3edd4c6116d5f0b8cf0ede6dfb4ed83bdd3
1fabd59e7 Break circular dependency: init -> * -> init by extracting shutdown.h (Ben Woosley)
e62fdfeea Drop unused init.h includes (Ben Woosley)
Pull request description:
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown api functions, including the new `CancelShutdown` for setting it to `false`.
Tree-SHA512: df42f75dfbba163576710e9a67cf1228531fd99d70a2f187bfba0bcc476d6749cf88180a97e66a81bb5b6c3c7f0917de7402d26039ba7b644cb7509b02f7e267
bb582a59c Add P2WSH destination helper and use it instead of manual hashing (Pieter Wuille)
eaba1c111 Add additional unit tests for invalid IsMine combinations (Pieter Wuille)
e6b9730c4 Do not expose invalidity from IsMine (Pieter Wuille)
Pull request description:
This improves the handling of INVALID in IsMine:
* Extra INVALID conditions were added to `IsMine` (following https://github.com/bitcoin/bitcoin/pull/13142/files#r185349057), but these were untested. Add unit tests for them.
* In https://github.com/bitcoin/bitcoin/pull/13142#issuecomment-386396975 it was suggested to merge `isInvalid` into the return status. This PR takes a different approach, and removes the `isInvalid` entirely. It was only ever used inside tests, as normal users of IsMine don't care about the reason for non-mine-ness, only whether it is or not. As the unit tests are extensive enough, it seems sufficient to have a black box text (with tests for both compressed and uncompressed keys).
Some addition code simplification is done as well.
Tree-SHA512: 3267f8846f3fa4e994f57504b155b0e1bbdf13808c4c04dab7c6886c2c0b88716169cee9c5b350513297e0ca2a00812e3401acf30ac9cde5d892f9fb59ad7fef
Most includers just wanted to react to pending shutdown.
This isolates access to `fRequestShutdown` and limits access to the shutdown
api functions, including the new `AbortShutdown` for setting it to `false`.
Note I originally called `AbortShutdown` `CancelShutdown` but that name was
already taken by winuser.h
https://travis-ci.org/bitcoin/bitcoin/jobs/386913329
This change also triggered a build error in bench. Fixing it required moving LIBBITCOIN_SERVER after LIBBITCOIN_WALLET in bench_bench_bitcoin_LDADD To make
server definitions in src/net.cpp available to wallet methods in
src/wallet/wallet.cpp. Specifically, solving:
libbitcoin_wallet.a(libbitcoin_wallet_a-wallet.o): In function `CWalletTx::RelayWalletTransaction(CConnman*)':
wallet.cpp:(.text+0x3f0e): undefined reference to `CConnman::NodeFullyConnected(CNode const*)'
collect2: error: ld returned 1 exit status
https://travis-ci.org/bitcoin/bitcoin/jobs/392133581
Need for remaining init.h includes confirmed via a thorough search with a more
specific regex:
\bInterrupt\(\)|\bShutdown\(\)|\bInitLogging\(\)|\bInitParameterInteraction\(\)|\bAppInitBasicSetup\(\)|\bAppInitParameterInteraction\(\)|\bAppInitSanityChecks\(\)|\bAppInitLockDataDirectory\(\)|\bAppInitMain\(\)|\bSetupServerArgs\(\)|\bLicenseInfo\(\)|g_wallet_init_interface|init.h
Instead of comparing version numbers in the wallet to the client
version number, compare them to the latest supported wallet version
in the client. This allows for wallet version numbers to be unrelated
to the client version number.
faa18ca046 wallet: Erase wtxOrderd wtx pointer on removeprunedfunds (MarcoFalke)
Pull request description:
This prevents segfaults, when reading from the freed memory.
Tree-SHA512: 04f8190dea7901cf1cc298d5db98c83b02858f27114c5ef4da738accd176d6647d6b81f3dc39f3d5912b1a981cf0599370fd391c4154ffbde97afc1fac389123
The ::value_type of the std::map/std::multimap/std::unordered_map containers is
std::pair<const Key, T>. Dropping the const results in an unnecessary copy,
for example in C++11 range-based loops.
For this I started with a more general scripted diff, then narrowed it down
based on the inspection showing that all actual map/multimap/unordered_map
variables used in loops start with m or have map in the name.
-BEGIN VERIFY SCRIPT-
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : m/for (\1std::pair<const \2\3 : m/' src/*.cpp src/**/*.cpp
sed -i -E 's/for \(([^<]*)std::pair<([^c])(.+) : (.*)map/for (\1std::pair<const \2\3 : \4map/' src/*.cpp src/**/*.cpp
-END VERIFY SCRIPT-
Instead of combining the -limitancestorcount and -limitdescendantcount into a nMaxChainLength, this commit uses each one separately in the coin eligibility filters.
TransactionWithinChainLimits would take a 'limit' and check it against ascendants and descendants. This is changed to take an explicit
max ancestors and max descendants value, and to test the corresponding value against its corresponding max.
6aa33feadb Drop UpdateTransaction in favor of UpdateInput (Ben Woosley)
Pull request description:
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the call
(and, often, the enclosing loop).
In most cases, this input is already immediately available and need not be
looked up.
Tree-SHA512: 8c7914a8b7ae975d8ad0e9d760e3c5da65776a5f79d060b8ffb6b3ff7a32235f71ad705f2185b368d9263742d7796bb562395d22b806d90e8502d8c496011e57
6b8b63af14 Generic TransactionSignatureCreator works with both CTransaction and CMutableTransaction (Martin Ankerl)
Pull request description:
Refactored `TransactionSignatureCreator` into a templated `GenericTransactionSignatureCreator` that works with both `CMutableTransaction` and `CTransaction`.
The advantage is that now in `SignSignature`, the `MutableTransactionSignatureCreator` can now operate directly with the `CMutableTransaction` without the need to copy the data into a `CTransaction`.
Running all unit tests brings a very noticable speedup on my machine:
48.4 sec before this change
36.4 sec with this change
--------
12.0 seconds saved
running only `--run_test=transaction_tests/test_big_witness_transaction`:
16.7 sec before this change
5.9 sec with this change
--------
10.8 seconds saved
This relates to my first attempt with the const_cast hack #13202, and to the slow unit test issue #10026.
Also see #13050 which modifies the tests but not the production code (like this PR) to get a speedup.
Tree-SHA512: 2cff0e9699f484f26120a40e431a24c8bc8f9e780fd89cb0ecf20c5be3eab6c43f9c359cde244abd9f3620d06c7c354e3b9dd3da41fa2ca1ac1e09386fea25fb
4b62bdf513 Wallet: Refactor ReserveKeyFromKeyPool for safety (Ben Woosley)
Pull request description:
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
Tree-SHA512: 753f057ad13bd4c28d121f426bf0967ed72b827d97fb24582f9326ec60072abc5482e3db69ccada7c5fc66de9957fc59098432dd223fc4116991cab44c6d7aef
Templated version so that no copying of CMutableTransaction into a CTransaction is
necessary. This speeds up the test case transaction_tests/test_big_witness_transaction
from 7.9 seconds to 3.1 seconds on my machine.
c004ffc9b4 Make handling of invalid in IsMine more uniform (Pieter Wuille)
a53f0feff8 Add some checks for invalid recursion in IsMine (Pieter Wuille)
b5802a9f5f Simplify IsMine logic (Pieter Wuille)
4e91820531 Make IsMine stop distinguishing solvable/unsolvable (Pieter Wuille)
6d714c3419 Make coincontrol use IsSolvable to determine solvability (Pieter Wuille)
Pull request description:
Our current `IsMine` logic does several things with outputs:
* Determine "spendability" (roughly corresponding to "could we sign for this")
* Determine "watching" (is this an output directly or indirectly a watched script)
* Determine invalidity (is this output definitely not legally spendable, detecting accidental uncompressed pubkeys in witnesses)
* Determine "solvability" (would we be able to sign for this ignoring the fact that we may be missing some private keys).
The last item (solvability) is mostly unrelated and only rarely needed (there is just one instance, inside the wallet's coin control logic). This PR changes that instance to use the separate `IsSolvable` function, and stop `IsMine` from distinguishing between solvable and unsolvable.
As an extra, this also simplifies the `IsMine` logic and adds some extra checks (which wouldn't be hit unless someone adds already invalid scripts to their wallet).
Tree-SHA512: 95a6ef75fbf2eedc5ed938c48a8e5d77dcf09c933372acdd0333129fb7301994a78498f9aacce2c8db74275e19260549dd67a83738e187d40b5090cc04f33adf
80b4910f7d wallet: Use shared pointer to retain wallet instance (João Barbosa)
Pull request description:
Currently there are 3 places where it makes sense to retain a wallet shared pointer:
- `vpwallets`;
- `interfaces::Wallet` interface instance - used by the UI;
- wallet RPC functions - given by `GetWalletForJSONRPCRequest`.
The way it is now it is possible to have, for instance, listunspent RPC and in parallel unload the wallet (once #13111 is merged) without blocking. Once the RPC finishes, the shared pointer will release the wallet.
It is also possible to get all existing wallets without blocking because the caller keeps a local list of shared pointers.
This is mostly relevant for wallet unloading.
This PR replaces #11402.
Tree-SHA512: b7e37c7e1ab56626085afe2d40b1628e8d4f0dbda08df01b7e618ecd2d894ce9b83d4219443f444ba889096286eff002f163cb0a48f37063b62e9ba4ccfa6cce
fac1223a56 Cache witness hash in CTransaction (MarcoFalke)
faab55fbb1 Make CMutableTransaction constructor explicit (MarcoFalke)
Pull request description:
This speeds up:
* compactblocks (v2)
* ATMP
* validation and miner (via `BlockWitnessMerkleRoot`)
* sigcache (see also unrelated #13204)
* rpc and rest (nice, but irrelevant)
This presumably slows down rescan, which uses a `CTransaction` and its `GetHash`, but never uses the `GetWitnessHash`. The slow down is proportional to the number of witness transactions in the rescan window. I.e. early in the chain there should be no measurable slow down. Later in the chain, there should be a slow down, but acceptable given the speedups in the modules mentioned above.
Tree-SHA512: 443e86acfcceb5af2163e68840c581d44159af3fd1fce266cab3504b29fcd74c50812b69a00d41582e7e1c5ea292f420ce5e892cdfab691da9c24ed1c44536c7
Updating the input explicitly requires the caller to present a mutable
input, which more clearly communicates the effects and intent of the method.
In most cases, this input is already immediately available and need not be
looked up.
ReserveKeyFromKeyPool's previous behaviour is to set nIndex to -1 if the keypool is
empty, OR throw an exception for technical failures. Instead, we now return false
if the keypool is empty, true if the operation succeeded.
This is to make failure more easily detectable by calling code.
Pass an error message back from CWallet::Verify(), and call
InitError/InitWarning from WalletInit::Verify().
This means that we can call CWallet::Verify() independently from
WalletInit and not have InitErrors printed to stdout. It also means that
the error can be reported to the user if dynamic wallet load fails.
This allows a single wallet to be verified. Prior to this commit, all
wallets were verified together by the WalletInit::Verify() function at
start-up.
Individual wallet verification will be done when loading wallets
dynamically at runtime.
WalletInit::Start calls postInitProcess() for each wallet. Previously
each call to postInitProcess() would attempt to schedule wallet
background flushing.
Just start wallet background flushing once from WalletInit::Start().
a8da482 Bump wallet version for pre split keypool (Andrew Chow)
dfcd9f3 Use a keypool of presplit keys after upgrading to hd chain split (Andrew Chow)
5c50e93 Allow -upgradewallet to upgradewallets to HD (Andrew Chow)
2bcf2b5 Test sethdseed (Andrew Chow)
b5ba01a Add 'sethdseed' RPC to initialize or replace HD seed (Chris Moore)
dd3c07a Separate HaveKey function that checks whether a key is in a keystore (Andrew Chow)
Pull request description:
Revival/rebase of #11085
Adds a new command `sethdseed` which allows you to either set or generate a new HD seed to be used. A new keypool can be generated or the original one kept and new keys added to the keypool will come from the new HD seed.
Wallets that are not HD will be upgraded to be version FEATURE_HD_SPLIT when the `sethdseed` RPC command is used.
I have also add some tests for this.
Additionally `-upgradewallet` can now be used to upgrade a wallet from non-HD to HD. When it is used for such an upgrade, the keypool will be regenerated.
Tree-SHA512: e56c792e150590429ac4a1061e8d6f7b20cca06366e184eb9bbade4cd6ae82699a28fe84f87031eadba97ad2c1606517a105f00fb7b45779c979243020071adb
Bump the wallet version to indicate support for the pre split keypool.
Also prevents any wallets from upgrading to versions between HD_SPLIT
and PRE_SPLIT_KEYPOOL.
After upgrading to HD chain split, we want to continue to use keys
from the old keypool. To do this, before we generate any new keys after
upgrading, we mark all of the keypool entries as being pre-chain
split and move them to a separate pre chain split keypool. Keys are
fetched from that keypool until it is emptied. Only then are the new
internal and external keypools used.
Changes the maximum upgradewallet version to the latest wallet version
number, 159900. Non-HD wallets will be upgraded to use HD derivation.
Non HD chain split wallets will be upgraded to HD chain split.
If a non-HD wallet is upgraded to HD, the keypool will be entirely
regenerated.
Since upgradewallet is effectively run during a first run, all of the
first run initial setup stuff is combined with the upgrade to HD
CWallet::ScanForWalletTransactions did not previously take into account
pindexStop when calculating progress.
Renamed progress vars to progress_*.
rescanblockchain is the only rpc that uses this parameter.
1e46d8a Get rid of ambiguous OutputType::NONE value (Russell Yanofsky)
Pull request description:
Based on suggestion by @sipa https://github.com/bitcoin/bitcoin/pull/12119#issuecomment-357982763
After #12119, the NONE output type was overloaded to refer to either an output type that couldn't be parsed, or to an automatic change output mode. This change drops the NONE enum and uses a simple bool to indicate parse failure, and a new CHANGE_AUTO enum to refer the change output type.
This change is almost a pure refactoring except it makes RPCs reject empty string ("") address types instead of treating them like they were unset. This simplifies the parsing code a little bit and could prevent RPC usage mistakes. It's noted in the release notes.
Follows up #12408 by @MarcoFalke
Followups for future PRs:
- [ ] Add explicit support for specifying "auto" in `ParseOutputType` as suggested by promag and sipa: https://github.com/bitcoin/bitcoin/pull/12729#issuecomment-374799567 and https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969481
- [ ] Add wallet `AddressChangeType` method to complement `TransactionChangeType`: https://github.com/bitcoin/bitcoin/pull/12729#discussion_r175969618.
Tree-SHA512: 8b08b272bcb177a0a9e556dcd965840a7fe601ef83ca97938b879c9b1a33b5b3f96939e1bceef11ba7c644ac21bfd6c1dbc6ca715cd1da4ace50475240e4ee48
9cb6cdc Simplify semantics of ChainStateFlushed callback (Matt Corallo)
50b6533 scripted-diff: Rename SetBestChain callback ChainStateFlushed (Matt Corallo)
Pull request description:
Previously, ChainStateFlushed would fire either if a full flush
completed (which can happen due to memory limits, forced flush, or
on its own DATABASE_WRITE_INTERVAL timer) *or* on a
ChainStateFlushed-specific DATABASE_WRITE_INTERVAL timer. This is
both less clear for clients (as there are no guarantees about a
flush having actually happened prior to the call), and reults in
extra flushes not clearly intended by the code. We drop the second
case, providing a strong guarantee without removing the periodit
timer-based flushing.
This is a follow-up to discussion in #11857.
Tree-SHA512: 22ba3a0954d265d28413dbf87040790ca5b439820ee7bbadab14028295ec190de82ce5cd664426c82e58b706dc84278868026fa8d066702eb6e6962c9ace1f8e
This much more accurately captures the meaning of the callback.
-BEGIN VERIFY SCRIPT-
sed -i 's/SetBestChain/ChainStateFlushed/g' src/validationinterface.h src/validationinterface.cpp src/wallet/wallet.h src/wallet/wallet.cpp src/validation.cpp src/index/txindex.h src/index/txindex.cpp
-END VERIFY SCRIPT-
be67831 Make DummySignatureCreator a singleton (Pieter Wuille)
190b8d2 Make BaseSignatureCreator a pure interface (Pieter Wuille)
Pull request description:
* Removes the `m_provider` field from `BaseSignatureCreator`. Instead both a `SigningProvider` (which provides keys and scripts) and a `BaseSignatureCreator` (which implements the transaction-specific (or other) signing logic) are passed into and down in `ProduceSignature`, making the two concepts orthogonal.
* Makes `BaseSignatureCreator` a pure interface without constructor, making it easier to implement new derivations of it (for example for message signing).
* As `DummySignatureCreator` now becomes a stateless object, turn it into a singleton `DUMMY_SIGNATURE_CREATOR`.
Tree-SHA512: 5f1f4512e4ea7d02a31df7b9ede55008efa716c5b74a2630ca1c2fc6599584d8bf5f5641487266127f4b3788033803539fbd22b03ef1219c83c10da2d3da3dcd
cab0824 Logprint the start of a rescan (Jonas Schnelli)
Pull request description:
Right now, there is no log entry when a rescan starts which is confusing especially when a "still rescanning" log entry appears after the log-update timeout of 60s or when user manually aborts the rescan.
This PR adds a log entry when a rescan starts.
Tree-SHA512: 8712605af6fd60950bf3904cfb586da6022e44b3da6f3155fe4f02aae16df6044bc504b3d48945ea6d7fe768f0c6cb3282a2e2251d14bf3b7f1dcbd12568b05e
Add label API to wallet RPC.
This is one step towards #3816 ("Remove bolt-on account system") although it doesn't
actually remove anything yet.
These initially mirror the account functions, with the following differences:
- These functions aren't DEPRECATED in the help
- Help mentions 'label' instead of accounts. In the language used, labels are
associated with addresses, instead of addresses associated with labels. (unlike
with accounts.)
- Labels have no balance
- No balances in `listlabels`
- `listlabels` has no minconf or watchonly argument
- Like in the GUI, labels can be set on any address, not just receiving addreses
- Unlike accounts, labels can be deleted.
Being unable to delete them is a common annoyance (see #1231).
Currently only by reassigning all addresses using `setlabel`, but an explicit
call `deletelabel` which assigns all address to the default label may make
sense.
Thanks to Pierre Rochard for test fixes.
