b082f28101 rpc, wallet: use the same `next_index` in listdescriptors and importdescriptors (w0xlt)
Pull request description:
Currently `listdescriptors` RPC uses `next` key to represent `WalletDescriptor::next_index` while `importdescriptors` uses `next_index`. This creates two different descriptor formats.
This PR changes `listdescriptors` to use the same key as `importdescriptors`.
ACKs for top commit:
achow101:
ACK b082f28101
aureleoules:
reACK b082f28101
Tree-SHA512: c29ec59051878e614d749ed6dc85e5c14ad00db0e8fcbce3f5066d1aae85ef07ca70f02920299e48d191b7387024fe224b0054c4191a5951cb805106f7b8e37b
3e947d7117 doc: remove 'omitted...' doc for rpc getrawtransaction when verbose is 2 (dougEfish)
Pull request description:
Remove optional rpc doc for getrawtransaction when verbose is 2
ACKs for top commit:
stickies-v:
ACK 3e947d7117
Tree-SHA512: b9e970d6ef4a47ec7ca32f5ff1028cc901f1bfdc1571668208505d42f4160733530601b78e469de82a854d3b298a55a81d0a7916bc5db4a43ad6d6a299c55c9e
fa1b4e5c32 Use steady clock in FlushStateToDisk (MarcoFalke)
1111e2f8b4 Use steady clock in SeedStrengthen and FindBestImplementation (MarcoFalke)
Pull request description:
There may be a theoretical deadlock for the duration of the offset when the system clock is adjusted into a past time while executing `SeedStrengthen`.
Fix this by using steady clock.
Do the same in `FindBestImplementation`, which shouldn't be affected, because it discards outlier measurements. However, doing the same there for consistency seems fine.
Do the same in `FlushStateToDisk`, which should make the flushes more steady, if the system clock is adjusted by a large offset.
ACKs for top commit:
john-moffett:
ACK fa1b4e5c32
willcl-ark:
ACK fa1b4e5c3
Tree-SHA512: cc625e796b186accd53222bd64eb57d0512bc7e588312d254349b542bbc5e5daac348ff2b3b3f7dc5ae0bbbae2ec11fdbf3022cf2164211633765a4b0108e83e
2b373fe49d docs: update assumeutxo.md (James O'Beirne)
87a1108c81 test: add snapshot completion unittests (James O'Beirne)
d70919a88f refactor: make MempoolMutex() public (James O'Beirne)
7300ced9de log: add LoadBlockIndex() message for assumedvalid blocks (James O'Beirne)
d96c59cc5c validation: add ChainMan logic for completing UTXO snapshot validation (James O'Beirne)
f2a4f3376f move-only-ish: init: factor out chainstate initialization (James O'Beirne)
637a90b973 add Chainstate::HasCoinsViews() (James O'Beirne)
c29f26b47b validation: add CChainState::m_disabled and ChainMan::isUsable (James O'Beirne)
5ee22cdafd add ChainstateManager.GetSnapshot{BaseHeight,BaseBlock}() (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: https://github.com/bitcoin/bitcoin/pull/15606)
Part two of replacing https://github.com/bitcoin/bitcoin/pull/24232.
---
When a user activates a snapshot, the serialized UTXO set data is used to create an "assumed-valid" chainstate, which becomes active in an attempt to get the node to network tip as quickly as possible. Simultaneously in the background, the already-existing chainstate continues "conventional" IBD to both accumulate full block data and serve as a belt-and-suspenders to validate the assumed-valid chainstate.
Once the background chainstate's tip reaches the base block of the snapshot used, we set `m_stop_use` on that chainstate and immediately take the hash of its UTXO set; we verify that this matches the assumeutxo value in the source code. Note that while we ultimately want to remove this background chainstate, we don't do so until the following initialization process, when we again check the UTXO set hash of the background chainstate, and if it continues to match, we remove the (now unnecessary) background chainstate, and move the (previously) assumed-valid chainstate into its place. We then reinitialize the chainstate in the normal way.
As noted in previous comments, we could do the filesystem operations "inline" immediately when the background validation completes, but that's basically just an optimization that saves disk space until the next restart. It didn't strike me as worth the risk of moving chainstate data around on disk during runtime of the node, though maybe my concerns are overblown.
The final result of this completion process is a fully-validated chain, where the only evidence that the user synced using assumeutxo is the existence of a `base_blockhash` file in the `chainstate` directory.
ACKs for top commit:
achow101:
ACK 2b373fe49d
Tree-SHA512: a204e1d6e6932dd83c799af3606b01a9faf893f04e9ee1a36d63f2f1ccfa9118bdc1c107d86976aa0312814267e6a42074bf3e2bf1dead4b2513efc6d955e13d
Also adjusts the previous snapshot chainstate init tests
to account for the fact that the init process is now attempting to
validate and complete background chainstates whose tip is at the
snapshot base block. We use a DisconnectTip() hack to preserve the
nature of the test.
Trigger completion when a background validation chainstate reaches the
same height as a UTXO snapshot, and handle cleaning up the chainstate
on subsequent startup.
802cc1ef53 Deduplicate bitcoind and bitcoin-qt init code (Ryan Ofsky)
d172b5c671 Add InitError(error, details) overload (Ryan Ofsky)
3db2874bd7 Extend bilingual_str support for tinyformat (Ryan Ofsky)
c361df90b9 scripted-diff: Remove double newlines after some init errors (Ryan Ofsky)
Pull request description:
Add common InitConfig function to deduplicate bitcoind and bitcoin-qt code reading config files and creating the datadir.
Noticed the duplicate code while reviewing #27073 and want to remove it because difference in bitcoin-qt and bitcoind behavior make it hard to evaluate changes like #27073
There are a few minor changes in behavior:
- In bitcoin-qt, when there is a problem reading the configuration file, the GUI error text has changed from "Error: Cannot parse configuration file:" to "Error reading configuration file:" to be consistent with bitcoind.
- In bitcoind, when there is a problem reading the settings.json file, the error text has changed from "Failed loading settings file" to "Settings file could not be read" to be consistent with bitcoin-qt.
- In bitcoind, when there is a problem writing the settings.json file, the error text has changed from "Failed saving settings file" to "Settings file could not be written" to be consistent with bitcoin-qt.
- In bitcoin-qt, if there datadir is not accessible (e.g. no permission to read), there is an normal error dialog showing "Error: filesystem error: status: Permission denied [.../settings.json]", instead of an uncaught exception.
ACKs for top commit:
Sjors:
Light review ACK 802cc1ef53
TheCharlatan:
ACK 802cc1ef53
achow101:
ACK 802cc1ef53
Tree-SHA512: 9c78d277e9ed595fa8ce286b97d2806e1ec06ddbbe7bd3434bd9dd7b456faf8d989f71231e97311f36edb9caaec645a50c730bd7514b8e0fe6e6f7741b13d981
fa8481b05f util: Work around ParseHex gcc cross compiler bug (MarcoFalke)
Pull request description:
I fail to see how an explicit `ParseHex` template instantiation fails to also instantiate `TryParseHex`.
Nonetheless, to work around a compiler bug, change the explicit instantiation from `ParseHex` to `TryParseHex`. (`ParseHex` is inline anyway and will be instantiated by the compiler either way).
Fixes https://github.com/bitcoin/bitcoin/pull/25227#issuecomment-1456009757 :
```
CXXLD bitcoind
/usr/lib/gcc-cross/powerpc64le-linux-gnu/11/../../../../powerpc64le-linux-gnu/bin/ld: libbitcoin_node.a(libbitcoin_node_a-net_processing.o): in function `(anonymous namespace)::PeerManagerImpl::ProcessMessage(CNode&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, CDataStream&, std::chrono::duration<long, std::ratio<1l, 1000000l> >, std::atomic<bool> const&)':
net_processing.cpp:(.text+0x29660): undefined reference to `std::optional<std::vector<unsigned char, std::allocator<unsigned char> > > TryParseHex<unsigned char>(std::basic_string_view<char, std::char_traits<char> >)'
/usr/lib/gcc-cross/powerpc64le-linux-gnu/11/../../../../powerpc64le-linux-gnu/bin/ld: libbitcoin_node.a(libbitcoin_node_a-rest.o): in function `rest_getutxos(std::any const&, HTTPRequest*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)':
rest.cpp:(.text+0x83b4): undefined reference to `std::optional<std::vector<unsigned char, std::allocator<unsigned char> > > TryParseHex<unsigned char>(std::basic_string_view<char, std::char_traits<char> >)'
/usr/lib/gcc-cross/powerpc64le-linux-gnu/11/../../../../powerpc64le-linux-gnu/bin/ld: libbitcoin_node.a(libbitcoin_node_a-torcontrol.o): in function `std::vector<unsigned char, std::allocator<unsigned char> > ParseHex<unsigned char>(std::basic_string_view<char, std::char_traits<char> >)':
torcontrol.cpp:(.text._Z8ParseHexIhESt6vectorIT_SaIS1_EESt17basic_string_viewIcSt11char_traitsIcEE[_Z8ParseHexIhESt6vectorIT_SaIS1_EESt17basic_string_viewIcSt11char_traitsIcEE]+0x2c): undefined reference to `std::optional<std::vector<unsigned char, std::allocator<unsigned char> > > TryParseHex<unsigned char>(std::basic_string_view<char, std::char_traits<char> >)'
/usr/lib/gcc-cross/powerpc64le-linux-gnu/11/../../../../powerpc64le-linux-gnu/bin/ld: libbitcoin_common.a(libbitcoin_common_a-external_signer.o): in function `ExternalSigner::SignTransaction(PartiallySignedTransaction&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&)':
external_signer.cpp:(.text+0x8d84): undefined reference to `std::optional<std::vector<unsigned char, std::allocator<unsigned char> > > TryParseHex<unsigned char>(std::basic_string_view<char, std::char_traits<char> >)'
collect2: error: ld returned 1 exit status
ACKs for top commit:
gruve-p:
ACK fa8481b05f
hebasto:
ACK fa8481b05f, tested on Ubuntu 22.04, gcc 11.3 for the `riscv64-linux-gnu` host.,
Tree-SHA512: 53efa424e7e18d85a2c9ac2267b9370ae3594d9be73da5135a3a79bf07ab50fcc5357cbde09dc0b2a9eb78d78ec37beae0c9f876333b568e678b9d0067bc9e4e
60978c8080 test: Reduce extended timeout on abortnode test (Fabian Jahr)
660bdbf785 http: Release server before waiting for event base loop exit (João Barbosa)
8c6d007c80 http: Track active requests and wait for last to finish (João Barbosa)
Pull request description:
This revives #19420. Since promag is not so active at the moment, I can support this to finally get it merged.
The PR is rebased and comments by jonatack have been addressed.
Once this is merged, I will also reopen#19434.
ACKs for top commit:
achow101:
ACK 60978c8080
stickies-v:
re-ACK [60978c8](60978c8080)
hebasto:
ACK 60978c8080
Tree-SHA512: eef0fe1081e9331b95cfafc71d82f2398abd1d3439dac5b2fa5c6d9c0a3f63ef19adde1c38c88d3b4e7fb41ce7c097943f1815c10e33d165918ccbdec512fe1c
6a302d40df wallet: single output groups filtering and grouping process (furszy)
bd91ed1cb2 wallet: unify outputs grouping process (furszy)
55962001da test: coinselector_tests refactor, use CoinsResult instead of plain std::vector (furszy)
34f54a0a3a wallet: decouple outputs grouping process from each ChooseSelectionResult (furszy)
461f0821a2 refactor: make OutputGroup::m_outputs field a vector of shared_ptr (furszy)
d8e749bb84 test: wallet, add coverage for outputs grouping process (furszy)
06ec8f9928 wallet: make OutputGroup "positive_only" filter explicit (furszy)
Pull request description:
The idea originates from https://github.com/bitcoin/bitcoin/pull/24845#issuecomment-1130310321.
Note:
For clarity, it's recommended to start reviewing from the end result to understand the structure of the flow.
#### GroupOutputs function rationale:
If "Avoid Partial Spends" is enabled, the function gathers outputs with the same script together inside a container. So Coin Selection can treats them as if them were just one possible input and either select them all or not select them.
#### How the Inputs Fetch + Selection process roughly works:
```
1. Fetch user’s manually selected inputs.
2. Fetch wallet available coins (walks through the entire wallet txes map) and insert them into a set of vectors (each vector store outputs from a single type).
3. Coin Selection Process:
Call `AttemptSelection` 8 times. Each of them expands the coin eligibility filter (accepting a larger subset of coins in the calculation) until it founds a solutions or completely fails if no solutions gets founds after the 8 rounds.
Each `AttemptSelection` call performs the following actions:
- For each output type supported by the wallet (P2SH, P2PK, P2WPKH, P2WSH and a combination of all of them):
Call ‘ChooseSelectionResult’ providing the respective, filtered by type, coins vector. Which:
I. Groups the outputs vector twice (one for positive only and a second one who includes the negative ones as well).
- GroupOutputs walks-through the entire inputted coins vector one time at least, + more if we are avoiding partial spends, to generate a vector of OutputGroups.
II. Then performs every coin selection algorithm using the recently created vector of OutputGroup: (1) BnB, (2) knapsack and (3) SRD.
III. Then returns the best solution out of them.
```
We perform the general operation of gathering outputs, with the same script, into a single container inside:
Each coins selection attempt (8 times —> each coin eligibility filter), for each of the outputs vector who were filtered by type (plus another one joining all the outputs as well if needed), twice (one for the positive only outputs effective value and a second one for all of them).
So, in the worst case scenario where no solution is found after the 8 Coin Selection attempts, the `GroupOutputs` function is called 80 times (8 * 5 * 2).
#### Improvements:
This proposal streamlines the process so that the output groups, filtered by coin eligibility and type, are created in a single loop outside of the Coin Selection Process.
The new process is as follows:
```
1. Fetch user’s manually selected inputs.
2. Fetch wallet available coins.
3. Group outputs by each coin eligibility filter and each different output type found.
4. Coin Selection Process:
Call AttemptSelection 8 times. Each of them expands the coin eligibility filter (accepting different output groups) until it founds a solutions or completely fails if no solutions gets founds after the 8 rounds.
Each ‘AttemptSelection’ call performs the following actions:
- For each output type supported by the wallet (P2SH, P2PK, P2WPKH, P2WSH and all of them):
A. Call ‘ChooseSelectionResult’ providing the respective, filtered by type, output group. Which:
I. Performs every coin selection algorithm using the provided vector of OutputGroup: (1) BnB, (2) knapsack and (3) SRD.
II. Then returns the best solution out of them.
```
Extra Note:
The next steps after this PR will be to:
1) Merge `AvailableCoins` and `GroupOutputs` processes.
2) Skip entire coin selection rounds if no new coins are added into the subsequent round.
3) Remove global feerates from the OutputGroup class.
4) Remove secondary "grouped" tx creation from `CreateTransactionInternal` by running Coin Selection results over the aps grouped outputs vs non-aps ones.
ACKs for top commit:
S3RK:
ReACK 6a302d4
achow101:
ACK 6a302d40df
theStack:
re-ACK 6a302d40df🥥
Tree-SHA512: dff849063be328e7d9c358ec80239a6db2cd6131963b511b83699b95b337d3106263507eaba0119eaac63e6ac21c6c42d187ae23d79d9220b90c323d44b01d24
e4ede64fe8 Expand scantxoutset help text to cover tr() and miniscript (Greg Sanders)
Pull request description:
ACKs for top commit:
achow101:
ACK e4ede64fe8
darosior:
webACK e4ede64fe8
Tree-SHA512: 6b5d9e7fccc8242f4534861c1b438ec40fb03fbf5968c5a4af5ddbced73df6d666812053c2e12a1e0a34057f6f4fe11987c8c59d8cdfa48ca7ab7d2720b51ef9
4163093d63 wallet: use Mutex for g_sqlite_mutex instead of GlobalMutex (Vasil Dimov)
Pull request description:
Using `Mutex` provides stronger guarantee than `GlobalMutex` wrt Clang's
thread safety analysis. Thus it is better to reduce the usage of
`GlobalMutex` in favor of `Mutex`.
Using `Mutex` for `g_sqlite_mutex` is ok because its usage is limited in
`wallet/sqlite.cpp` and it does not require propagating the negative
annotations to not relevant code.
ACKs for top commit:
achow101:
ACK 4163093d63
hebasto:
re-ACK 4163093d63
TheCharlatan:
ACK 4163093d63
Tree-SHA512: 4913bcb8437ecf0e6b6cb781d02a6d24ffb4bf3e2e1899fa60785eab41c4c65dbdd9600bcb696290c873661b873ad61e5a4c4f205b7e66fdef2ae17c676cd12f
Optimizes coin selection by performing the "group outputs"
procedure only once, outside the "attempt selection" process.
Avoiding the repeated execution of the 'GroupOutputs' operation
that occurs on each coin eligibility filters (up to 8 of them);
then for every coin vector type plus one for all the coins together.
This also let us not perform coin selection over coin eligibility
filtered groups that don't add new elements.
(because, if the previous round failed, and the subsequent one has
the same coins, then this new round will fail again).
The 'GroupOutputs()' function performs the same
calculations for only-positive and mixed groups,
the only difference is that when we look for
only-positive groups, we discard negative utxos.
So, instead of wasting resources calling GroupOutputs()
for positive-only first, then call it again to include
the negative ones in the result, we can execute
GroupOutputs() only once, including in the response
both group types (positive-only and mixed).
The following scenarios are covered:
1) 10 UTXO with the same script:
partial spends is enabled --> outputs must not be grouped.
2) 10 UTXO with the same script:
partial spends disabled --> outputs must be grouped.
3) 20 UTXO, 10 one from scriptA + 10 from scriptB:
a) if partial spends is enabled --> outputs must not be grouped.
b) if partial spends is not enabled --> 2 output groups expected (one per script).
3) Try to add a negative output (value - fee < 0):
a) if "positive_only" is enabled --> negative output must be skipped.
b) if "positive_only" is disabled --> negative output must be added.
4) Try to add a non-eligible UTXO (due not fulfilling the min depth target for
"not mine" UTXOs) --> it must not be added to any group
5) Try to add a non-eligible UTXO (due not fulfilling the min depth target for
"mine" UTXOs) --> it must not be added to any group
6) Surpass the 'OUTPUT_GROUP_MAX_ENTRIES' size and verify that a second partial
group gets created.
8847ce44e0 util: add missing include and fix function signature (Cory Fields)
Pull request description:
ping hebasto
Discovered while testing pre-compiled header support with CMake: https://github.com/theuni/bitcoin/commits/cmake-pch-poc. Compilation of that branch fails without this fix and succeeds with it.
Similar to the fix in #27144.
The problem of having a default argument in the definition was masked by the missing include. Using PCH forces that include, so we end up with the compiler error we should've been getting all along.
ACKs for top commit:
fanquake:
ACK 8847ce44e0
Tree-SHA512: 5eb9a6691ee37cbc5033a48aedcbf5c93af3b234614ae14c3fcc858f1ee505f630ad68f8bbb69ffa280080c8d0f91451362cb3819290b741ce906b2b3224a622
987f1bb41c Fixed a couple of typos in comments to make linter happy (hernanmarino)
Pull request description:
While working on a different PR, I stumbled upon a couple of typos being reported by the linter and fixed them.
ACKs for top commit:
kristapsk:
utACK 987f1bb41c
Tree-SHA512: bf53e150bb7c6b59a9dc270bdf748bf8fb0430f35d1d0a68ef70e9345d322470c4a0b5cd7f2c3cfc81ce087bb6624d820d5f4501f58aaa5806f358ddd4e0b551
And not hide it inside the `OutputGroup::Insert` method.
This method does not return anything if insertion fails.
We can know before calling `Insert` whether the coin
will be accepted or not.
545ff924ab refactor: use string_view for RPC named argument values (stickies-v)
7727603e44 refactor: reduce unnecessary complexity in ParseNonRFCJSONValue (stickies-v)
1d02e59901 test: add cases to JSON parsing (stickies-v)
Pull request description:
Inspired by MarcoFalke's [comment](https://github.com/bitcoin/bitcoin/pull/26506#discussion_r1036149426). Main purpose of this PR is to minimize copying (potentially large) RPC named arguments when calling `.substr()` by using `std::string_view` instead of `std::string`. Furthermore, cleans up the code by removing unnecessary complexity in `ParseNonRFCJSONValue()` (done first to avoid refactoring required to concatenate `string` and `string_view`), updates some naming and adds a few test cases. Should not introduce any behaviour change.
## Questions
- ~Was there actually any merit to `ParseNonRFCJSONValue()` surrounding the value with brackets and then parsing it as an array? I don't see it, and the new approach doesn't fail any tests. Still a bit suspicious about it though.~
- Cleared up by https://github.com/bitcoin/bitcoin/pull/26506#pullrequestreview-1211984059
- If there are no objections to 7727603e44, I think we should follow up with a PR to rename `ParseNonRFCJSONValue()` to a local `Parse()` helper function (that throws if invalid), remove it from `client.h` and merge the test coverage we currently have on `ParseNonRFCJSONValue()` with the coverage we have on `UniValue::read()`.
ACKs for top commit:
ryanofsky:
Code review ACK 545ff924ab
MarcoFalke:
review ACK 545ff924ab📻
Tree-SHA512: b1c89fb010ac9c3054b023cac1acbba2a539a09cf39a7baffbd7f7571ee268d5a6d98701c7ac10d68a814526e8fd0fe96ac1d1fb072f272033e415b753f64a5c
9c371e50a2 doc: Update Transifex links and slug format in Release Process (Hennadii Stepanov)
Pull request description:
Reflected the recent changes in Transifex's [workflow](https://github.com/bitcoin/bitcoin/pull/26321) and on its website.
ACKs for top commit:
jarolrod:
ACK 9c371e50a2
Tree-SHA512: d11f2fa197bba2e3198ca255d80edd7178e8074dc84b03262054d01fa33c8160ca492a1358e9da1e7d32cec21a298593322d10e4cb045ef99ccec2cbe901cb63
2c9eb4afe1 guix: use cmake-minimal over cmake (fanquake)
1475515312 guix: use coreutils-minimal over coreutils (fanquake)
4445621415 guix: use bash-minimal over bash (fanquake)
Pull request description:
Minimal versions of the same packages, that should still be sufficient for our use:
> (define-public bash-minimal
;; A stripped-down Bash for non-interactive use.
> (define-public coreutils-minimal
;; Coreutils without its optional dependencies.
> ;;; This minimal variant of CMake does not include the documentation. It is
;;; used by the cmake-build-system.
(define-public cmake-minimal
ACKs for top commit:
TheCharlatan:
ACK 2c9eb4afe1
Sjors:
tACK 2c9eb4afe1
achow101:
ACK 2c9eb4afe1
hebasto:
ACK 2c9eb4afe1,
Tree-SHA512: f91ca9e088b8346b20c2affc80870c31640de3aedcfcc0fb98a5e82c77ef64537870b88552f26759d31d8d0956b1fd685e6c25d5acbc92f5feaececd1a7dd37e
Add common InitConfig function to deduplicate bitcoind and bitcoin-qt code
reading config files and creating the datadir.
There are a few minor changes in behavior:
- In bitcoin-qt, when there is a problem reading the configuration file, the
GUI error text has changed from "Error: Cannot parse configuration file:" to
"Error reading configuration file:" to be consistent with bitcoind.
- In bitcoind, when there is a problem reading the settings.json file, the
error text has changed from "Failed loading settings file" to "Settings
file could not be read" to be consistent with bitcoin-qt.
- In bitcoind, when there is a problem writing the settings.json file, the
error text has changed from "Failed saving settings file" to "Settings file
could not be written" to be consistent with bitcoin-qt.
- In bitcoin-qt, if there datadir is not accessible (e.g. no permission to read),
there is an normal error dialog showing "Error: filesystem error: status:
Permission denied [.../settings.json]", instead of an uncaught exception
56e37e71a2 Make miniscript fuzzers avoid script size limit (Pieter Wuille)
bcec5ab4ff Make miniscript fuzzers avoid ops limit (Pieter Wuille)
213fffa513 Enforce type consistency in miniscript_stable fuzz test (Pieter Wuille)
e1f30414c6 Simplify miniscript fuzzer NodeInfo struct (Pieter Wuille)
5abb0f5ac3 Do base type propagation in miniscript_stable fuzzer (Pieter Wuille)
Pull request description:
This adds a number of improvements to the miniscript fuzzers that all amount to rejecting invalid or overly big miniscripts early on:
* Base type propagation in the miniscript_stable fuzzers prevents constructing a large portion of miniscripts that would be illegal, with just a little bit of type logic in the fuzzer. The fuzzer input format is unchanged.
* Ops and script size tracking in GenNode means that too-large scripts (either due to script size limit or ops limit) will be detected on the fly during fuzz input processing, before actually constructing the scripts.
Closes#27147.
ACKs for top commit:
darosior:
re-ACK 56e37e71a2
dergoegge:
tACK 56e37e71a2
Tree-SHA512: 245584adf9a6644a35fe103bc81b619e5b4f5d467571a761b5809d08b1dec48f7ceaf4d8791ccd8208b45c6b309d2ccca23b3d1ec5399df76cd5bf88f2263280
This is only used in the current PR to avoid ugly
`strprintf(Untranslated("%s:\n%s"), str, MakeUnorderedList(details)`
boilerplate in init code. But in the future the function could be extended and
more widely used to include more details in GUI error messages or display them
in a more readable way, see code comment.
Previous bilingual_str tinyformat::format accepted bilingual format strings,
but not bilingual arguments. Extend it to accept both. This is useful when
embedding one translated string inside another translated string, for example:
`strprintf(_("Error: %s"), message)` which would fail previously if `message`
was a bilingual_str.
Some InitError calls had trailing \n characters, causing double newlines in
error output. After this change InitError calls consistently output one newline
instead of two. Appearance of messages in the GUI does not seem to be affected.
Can be tested with:
src/bitcoind -regtest -datadir=noexist
src/qt/bitcoin-qt -regtest -datadir=noexist
-BEGIN VERIFY SCRIPT-
git grep -l InitError src/ | xargs sed -i 's/\(InitError(.*\)\\n"/\1"/'
-END VERIFY SCRIPT-
29b62c01c8 valgrind: remove libsecp256k1 suppression (fanquake)
Pull request description:
I am no-longer been able to recreate this issue, atleast after the most recent libsecp256k1 changes. Can someone else confirm?
ACKs for top commit:
MarcoFalke:
lgtm ACK 29b62c01c8
sipa:
utACK 29b62c01c8
Tree-SHA512: e61e5b88ac2af3c779f23d999938bec4497f6433a029c07dd57a9481fe9cc104d8d8f63586910b29f41e66bbf0ed094bc7539c0df84754a1783c4b1b15af072e
75db62ba4c refactor: Move calculation logic out from `CheckSequenceLocksAtTip()` (Hennadii Stepanov)
3bc434f459 refactor: Add `CalculateLockPointsAtTip()` function (Hennadii Stepanov)
Pull request description:
This PR is follow up for bitcoin/bitcoin#22677 and bitcoin/bitcoin#23683.
On master (013daed9ac) it is not obvious that `CheckSequenceLocksAtTip()` function can modify its `LockPoints* lp` parameter which leads to https://github.com/bitcoin/bitcoin/pull/22677#discussion_r762040101.
This PR:
- separates the lockpoint calculate logic from `CheckSequenceLocksAtTip()` function into a new `CalculateLockPointsAtTip()` one
- cleans up the `CheckSequenceLocksAtTip()` function interface
- makes code easier to reason about (hopefully)
ACKs for top commit:
achow101:
ACK 75db62ba4c
stickies-v:
re-ACK 75db62b
Tree-SHA512: 072c3fd9cd1e1b0e0bfc8960a67b01c80a9f16d6778f374b6944ade03a020415ce8b8ab2593b0f5e787059c8cf90af798290b4c826785d41955092f6e12e7486
9a9d5da11f refactor: Stop using gArgs global in system.cpp (Ryan Ofsky)
b20b34f5b3 refactor: Use new GetConfigFilePath function (Ryan Ofsky)
Pull request description:
Most of the code in `util/system.cpp` that was hardcoded to use the global `ArgsManager` instance `gArgs` has been changed to stop using it (for example in https://github.com/bitcoin/bitcoin/pull/20092). But a few hardcoded references to `gArgs` remain. This commit removes the last ones so these functions aren't reading or writing global state.
Noticed these `gArgs` references while reviewing #27073
ACKs for top commit:
achow101:
ACK 9a9d5da11f
stickies-v:
ACK 9a9d5da11
willcl-ark:
tACK 9a9d5da11
Tree-SHA512: 2c74b0d5fc83e9ed2ec6562eb26ec735512f75db8876a11a5d5f04e6cdbe0cd8beec19894091aa2cbf29319194d2429ccbf8036f5520ecc394f6fe89a0079a7b
a984beeca1 [ci] change lint to bookworm for git v2.38 (glozow)
Pull request description:
Since 5497c14, verify-commits.py uses `git merge-tree` which requires git v2.38 or later. Fix the lint jobs on master (e.g. https://cirrus-ci.com/task/4971007513985024).
ACKs for top commit:
achow101:
ACK a984beeca1
hebasto:
re-ACK a984beeca1
Tree-SHA512: dd50598aefb6f9c86cf221dea27fcc521e335cb182f7a3abcb3215d3991794354085be3e07c133ab74ca8b957e3a6acc43722899165957b3d898867d6253ebdc
fb0dbe9423 docs: GetDataDirNet and GetDataDirBase don't create datadir (stickies-v)
Pull request description:
Since #27073, the behaviour of `GetDataDir()` [changed](https://github.com/bitcoin/bitcoin/pull/27073/files#diff-19427b0dd1a791adc728c82e88f267751ba4f1c751e19262cac03cccd2822216L435-L443) to only return the datadir path, but not create it if non-existent. This also changed the behaviour of `GetDataDirNet()` and `GetDataDirBase()` but the docs do not yet reflect that.
ACKs for top commit:
TheCharlatan:
ACK fb0dbe9423
theStack:
ACK fb0dbe9423
willcl-ark:
ACK fb0dbe942
Tree-SHA512: 3f10f4871df59882f3649c6d3b2362cae2f8a01ad0bd0c636c5608b0d177d279a2e8712930b819d6d3912e91fa6447b9e54507c33d8afe427f7f39002b013bfb
3141eab9c6 test: add functional test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
e252909e56 test: add unit test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
77557dda4a prune: scan and unlink already pruned block files on startup (Andrew Toth)
Pull request description:
There are a few cases where we can mark a block and undo file as pruned in our block index, but not actually remove the files from disk.
1. If we call `FindFilesToPrune` or `FindFilesToPruneManual` and crash before `UnlinkPrunedFiles`.
2. If on Windows there is an open file handle to the file somewhere else when calling `fs::remove` in `UnlinkPrunedFiles` (https://en.cppreference.com/w/cpp/filesystem/remove, https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-deletefilew#remarks). This could be from another process, or if we are calling `ReadBlockFromDisk`/`ReadRawBlockFromDisk` without having a lock on `cs_main` (which has been allowed since ccd8ef65f9).
This PR mitigates this by scanning all pruned block files on startup after `LoadBlockIndexDB` and unlinking them again.
ACKs for top commit:
achow101:
ACK 3141eab9c6
pablomartin4btc:
re-ACK with added functional test 3141eab9c6.
furszy:
Code review ACK 3141eab9
theStack:
Code-review ACK 3141eab9c6
Tree-SHA512: 6c73bc57838ad1b7e5d441af3c4d6bf4c61c4382e2b86485e57fbb74a61240710c0ceeceb8b4834e610ecfa3175c6955c81ea4b2285fee11ca6383f472979d8d
