Fixed sorting of listen addresses so that wildcard address is always at
the end. Failure to do so could result in several listen sockets to be
created instead of only one listening on wildcard address.
Reported by Roman Odaisky.
Fixed compile-time conditionals used to detect if X-Forwarded-For support
is needed.
Note: compatibility shims were added during merge to avoid possible
breakage of 3rd party modules. At least cache purge module was broken
by the original commit, as it used to rely on NGX_HTTP_PROXY define.
HP-UX needs _HPUX_ALT_XOPEN_SOCKET_API to be defined to be able to
use various POSIX versions of networking functions. Notably sendmsg()
resulted in "sendmsg() failed (9: Bad file number)" alerts without it.
See xopen_networking(7) for more details.
This fixes alignment problems observerd on ARMs, and likely also needed
for MIPSes. Unless we know alignment is not required just assume we
need 16, which appears to be safe default for all architectures.
See here for details:
http://mailman.nginx.org/pipermail/nginx/2012-June/034139.html
With previous code wildcard names were added to hash even if conflict
was detected. This resulted in identical names in hash and segfault
later in ngx_hash_wildcard_init().
*) Mp4: fixed non-keyframe seeks in some cases (ticket #175).
Number of entries in stsc atom was wrong if we've added an entry to
split a chunk.
Additionally, there is no need to add an entry if we are going to split
last chunk in an entry, it's enough to update the entry we already have.
Previously new entry was added and old one was left as is, resulting in
incorrect entry with zero chunks which might confuse some software.
*) Mp4: fixed streaming if moov atom is at buffer edge.
Contains response status code as a 3-digit integer
(with leading zeroes if necessary), or one of the following values:
000 - response status code has not yet been assigned
009 - HTTP/0.9 request is being processed
*) Fixed spelling of "endianness", and called it "byte ordering" in the
user visible part.
*) Fixed return type of ngx_strerror_init().
*) Fixed a harmless error in spelling of "Connection: close" when computing
the response header length.
*) Style.
*) Added code to look up Google perftools in /opt/local/, for MacPorts.
*) Resolver: fixed format specification.
Patch by Yichun Zhang (agentzh).
*) Support for IPv6 literals and an optional port in resolver.
*) Fixed crash in ngx_resolver_cleanup_tree().
If sending a DNS request fails with an error (e.g., when mistakenly
trying to send it to a local IP broadcast), such a request is not
deleted if there are clients waiting on it. However, it was still
erroneously removed from the queue. Later ngx_resolver_cleanup_tree()
attempted to remove it from the queue again that resulted in a NULL
pointer dereference.
*) When "resolver" is configured with a domain name, only the first
resolved address was used. Now all addresses will be used.
*) Fixed segfault with poll and resolver used.
Poll event method needs ngx_cycle->files to work, and use of
ngx_exit_cycle without files set caused null pointer dereference in
resolver's cleanup on udp socket close.
Fixed returned value handling from the cookie rewrite handler.
If the "proxy_cookie_domain" or "proxy_cookie_path" directive is used and there
are no matches in Set-Cookie header then ngx_http_proxy_rewrite_cookie() returns
NGX_DECLINED to indicate that the header was not rewritten. Returning this value
further from the upstream headers copy handler resulted in 500 error response.
See here for report:
http://mailman.nginx.org/pipermail/nginx/2012-May/033858.html
Fixed compilation with -DNGX_DEBUG_MALLOC on FreeBSD 10.
After jemalloc 3.0.0 import there is no _malloc_options symbol, it has
been replaced with the malloc_conf one with a different syntax.
Fixed core variables dynamic access after reconfiguration.
If variable was indexed in previous configuration but not in current
one, the NGX_HTTP_VAR_INDEXED flag was left set and confused
ngx_http_get_variable().
Patch by Yichun Zhang (agentzh), slightly modified.
*) Added syntax checking of the second parameter of the "split_clients"
directive.
*) Capped the status code that may be returned with "return" and
"try_files".
*) Zero padded the returned and logged HTTP status code, and fixed possible
buffer overrun in $status handling.
*) Win32: disallowed access to various non-canonical name variants.
This includes trailings dots and spaces, NTFS streams (and short names, as
previously checked). The checks are now also done in ngx_file_info(), thus
allowing to use the "try_files" directive to protect external scripts.
*) Win32: normalization of trailing dot inside uri.
Windows treats "/directory./" identical to "/directory/". Do the same
when working on Windows. Note that the behaviour is different from one
with last path component (where multiple spaces and dots are ignored by
Windows).
*) Win32: uris with ":$" are now rejected.
There are too many problems with special NTFS streams, notably "::$data",
"::$index_allocation" and ":$i30:$index_allocation".
For now we don't reject all URIs with ":" like Apache does as there are no
good reasons seen yet, and there are multiple programs using it in URLs
(e.g. MediaWiki).
*) Added IPv6 and UNIX-domain socket support in "debug_connection"
directive.
*) New function ngx_http_get_forwarded_addr() to look up real client
address.
On input it takes an original address, string in the X-Forwarded-For format
and its length, list of trusted proxies, and a flag indicating to perform
the recursive search. On output it returns NGX_OK and the "deepest" valid
address in a chain, or NGX_DECLINED. It supports AF_INET and AF_INET6.
Additionally, original address and/or proxy may be specified as AF_UNIX.
*) Realip: chains of trusted proxies and IPv6 support.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "real_ip_recursive"
directive (closes#2). It also gets full IPv6 support (closes#44)
and canonical value of the $client_addr variable on address change.
Example:
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.0/8;
set_real_ip_from ::1;
set_real_ip_from unix:;
real_ip_recursive on;
*) Geo: chains of trusted proxies and partial IPv6 support.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "proxy_recursive"
directive in the "geo" block. It also gets partial IPv6 support:
now proxies may be specified with IPv6 addresses.
Example:
geo $test {
...
proxy 127.0.0.1;
proxy ::1;
proxy_recursive;
}
There's also a slight change in behavior. When original client
address (as specified by the "geo" directive) is one of the
trusted proxies, and the value of the X-Forwarded-For request
header cannot not be parsed as a valid address, an original client
address will be used for lookup. Previously, 255.255.255.255 was
used in this case.
*) Geoip: trusted proxies support and partial IPv6 support.
The module now supports recursive search of client address through the
chain of trusted proxies (closes#100), in the same scope as the geo
module. Proxies are listed by the "geoip_proxy" directive, recursive
search is enabled by the "geoip_proxy_recursive" directive. IPv6 is
partially supported: proxies may be specified with IPv6 addresses.
Example:
geoip_country .../GeoIP.dat;
geoip_proxy 127.0.0.1;
geoip_proxy ::1;
geoip_proxy 10.0.0.0/8;
geoip_proxy_recursive on;
*) Upstream: smooth weighted round-robin balancing.
For edge case weights like { 5, 1, 1 } we now produce { a, a, b, a, c, a, a }
sequence instead of { c, b, a, a, a, a, a } produced previously.
Algorithm is as follows: on each peer selection we increase current_weight
of each eligible peer by its weight, select peer with greatest current_weight
and reduce its current_weight by total number of weight points distributed
among peers.
In case of { 5, 1, 1 } weights this gives the following sequence of
current_weight's:
a b c
0 0 0 (initial state)
5 1 1 (a selected)
-2 1 1
3 2 2 (a selected)
-4 2 2
1 3 3 (b selected)
1 -4 3
6 -3 4 (a selected)
-1 -3 4
4 -2 5 (c selected)
4 -2 -2
9 -1 -1 (a selected)
2 -1 -1
7 0 0 (a selected)
0 0 0
To preserve weight reduction in case of failures the effective_weight
variable was introduced, which usually matches peer's weight, but is
reduced temporarily on peer failures.
This change also fixes loop with backup servers and proxy_next_upstream
http_404 (ticket #47), and skipping alive upstreams in some cases if there
are multiple dead ones (ticket #64).
*) Upstream: fixed ip_hash rebalancing with the "down" flag.
Due to weight being set to 0 for down peers, order of peers after sorting
wasn't the same as without the "down" flag (with down peers at the end),
resulting in client rebalancing for clients on other servers. The only
rebalancing which should happen after adding "down" to a server is one
for clients on the server.
The problem was introduced in r1377 (which fixed endless loop by setting
weight to 0 for down servers). The loop is no longer possible with new
smooth algorithm, so preserving original weight is safe.
*) Fixed possible request hang with filter finalization.
With r->filter_finalize set the ngx_http_finalize_connection() wasn't
called from ngx_http_finalize_request() called with NGX_OK, resulting in
r->main->count not being decremented, thus causing request hang in some
rare situations.
Patch by Yichun Zhang (agentzh).
*) Fixed segfault with filter_finalize introduced in r4621 (1.3.0).
See the following thread for more details:
http://mailman.nginx.org/pipermail/nginx-devel/2012-May/002190.html
In case of EMFILE/ENFILE returned from accept() we disable accept events,
and (in case of no accept mutex used) arm timer to re-enable them later.
With accept mutex we just drop it, and rely on normal accept mutex handling
to re-enable accept events once it's acquired again.
As we now handle errors in question, logging level was changed to "crit"
(instead of "alert" used for unknown errors).
Note: the code might call ngx_enable_accept_events() multiple times if
there are many listen sockets. The ngx_enable_accept_events() function was
modified to check if connection is already active (via c->read->active) and
skip it then, thus making multiple calls safe.
The following code resulted in incorrect escaping of uri and possible
segfault:
location / {
rewrite ^(.*) $1?c=$1;
return 200 "$uri";
}
If there were arguments in a rewrite's replacement string, and length was
actually calculated (due to duplicate captures as in the example above,
or variables present), the is_args flag was set and incorrectly copied
after length calculation. This resulted in escaping applied to the uri part
of the replacement, resulting in incorrect escaping. Additionally, buffer
was allocated without escaping expected, thus this also resulted in buffer
overrun and possible segfault.
Fastcgi: fixed padding handling on fixed-size records.
Padding was incorrectly ignored on end request, empty stdout and stderr
fastcgi records. This resulted in protocol desynchronization if fastcgi
application used these records with padding for some reason.
Reported by Ilia Vinokurov.
Added r->state reset on fastcgi/scgi/uwsgi request start.
Failing to do so results in problems if 400 or 414 requests are
redirected to fastcgi/scgi/uwsgi upstream, as well as after invalid
headers got from upstream. This was already fixed for proxy in r3478,
but fastcgi (the only affected protocol at that time) was missed.
Reported by Matthieu Tourne.
On internal redirects this happens via ngx_http_handler() call, which is
not called on named location redirect. As a result incorrect write handler
remained (if previously set) and this might cause incorrect behaviour (likely
request hang).
Patch by Yichun Zhang (agentzh).
