Bitcoin core has a standardness rule for max satisfaction script sig size.
This PR adds to the policy header file so that it is documented along with
along policy rules. The initial reasoning that 1650 is an implicit
limit(would not reached assuming all other policy rules are being
followed) is outdated.
As we now know, bitcoin transactions can have spend conditions are more than
just signatures and there may exist p2sh transactions involving 100 byte
preimages that maybe non-standard because of this rule. Because this
rule is no longer implicit, we should explicitly document it in policy
header file
This adds a `TxoutType::WITNESS_V1_TAPROOT` for P2TR outputs, and permits spending
them in standardness rules. No corresponding `CTxDestination` is added for it,
as that isn't needed until we want wallet integration. The taproot validation flags
are also enabled for mempool transactions, and standardness rules are added
(stack item size limit, no annexes).
-BEGIN VERIFY SCRIPT-
# General rename helper: $1 -> $2
rename_global() { sed -i "s/\<$1\>/$2/g" $(git grep -l "$1"); }
# Helper to rename TxoutType $1
rename_value() {
sed -i "s/ TX_$1,/ $1,/g" src/script/standard.h; # First strip the prefix in the definition (header)
rename_global TX_$1 "TxoutType::$1"; # Then replace globally
}
# Change the type globally to bring it in line with the style-guide
# (clsses are UpperCamelCase)
rename_global 'enum txnouttype' 'enum class TxoutType'
rename_global 'txnouttype' 'TxoutType'
# Now rename each enum value
rename_value 'NONSTANDARD'
rename_value 'PUBKEY'
rename_value 'PUBKEYHASH'
rename_value 'SCRIPTHASH'
rename_value 'MULTISIG'
rename_value 'NULL_DATA'
rename_value 'WITNESS_V0_KEYHASH'
rename_value 'WITNESS_V0_SCRIPTHASH'
rename_value 'WITNESS_UNKNOWN'
-END VERIFY SCRIPT-
Remove last few instances of accesses to node global variables from wallet
code. Also remove accesses to node globals from code in policy/policy.cpp that
isn't actually called by wallet code, but does get linked into wallet code.
This is the last change needed to allow bitcoin-wallet tool to be linked
without depending on libbitcoin_server.a, to ensure wallet code doesn't access
node global state and avoid bugs like
https://github.com/bitcoin/bitcoin/pull/15557#discussion_r267735431
This moves the following policy settings functions and globals to a new
src/policy/settings unit in lib_server:
- `incrementalRelayFee`
- `dustRelayFee`
- `nBytesPerSigOp`
- `fIsBareMultisigStd`
These settings are only required by the node and should not be accessed
by other libraries.
A transaction with 1 segwit input and 1 P2WPHK output has non-witness size of 82 bytes. Anything smaller than this have unnecessary malloc overhead and are not relayed/mined.
This disables OP_CODESEPARATOR in non-segwit scripts (even in an unexecuted branch), and makes a positive FindAndDelete result invalid. This ensures that the scriptCode serialized in SignatureHash() is always the same as the script passing to the EvalScript.
b224a47a1 Add address_types test (Pieter Wuille)
7ee54fd7c Support downgrading after recovered keypool witness keys (Pieter Wuille)
940a21932 SegWit wallet support (Pieter Wuille)
f37c64e47 Implicitly know about P2WPKH redeemscripts (Pieter Wuille)
57273f2b3 [test] Serialize CTransaction with witness by default (Pieter Wuille)
cf2c0b6f5 Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)
37c03d3e0 Support P2WPKH addresses in create/addmultisig (Pieter Wuille)
3eaa003c8 Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)
30a27dc5b Expose method to find key for a single-key destination (Pieter Wuille)
985c79552 Improve witness destination types and use them more (Pieter Wuille)
cbe197470 [refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)
0c8ea6380 Abstract out IsSolvable from Witnessifier (Pieter Wuille)
Pull request description:
This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089.
Two new configuration options are added:
* `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`.
* `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used.
All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version.
The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key.
To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used:
* All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date.
* All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software.
* All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work.
These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented.
`dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now.
Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
No sensible user will ever keep the default settings here, so not
having sensible defaults only serves to screw users who are
paying less attention, which makes for terrible defaults.
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
Three categories of modifications:
1)
1 instance of 'The Bitcoin Core developers \n',
1 instance of 'the Bitcoin Core developers\n',
3 instances of 'Bitcoin Core Developers\n', and
12 instances of 'The Bitcoin developers\n'
are made uniform with the 443 instances of 'The Bitcoin Core developers\n'
2)
3 instances of 'BitPay, Inc\.\n' are made uniform with the other 6
instances of 'BitPay Inc\.\n'
3)
4 instances where there was no '(c)' between the 'Copyright' and the year
where it deviates from the style of the local directory.
c59c434 qa: Add test for standardness of segwit v0 outputs (Suhas Daftuar)
1ffaff2 Make witness v0 outputs non-standard before segwit activation (Johnson Lau)
- Replace NOP3 with CHECKSEQUENCEVERIFY (BIP112)
<nSequence> CHECKSEQUENCEVERIFY -> <nSequence>
- Fails if txin.nSequence < nSequence, allowing funds of a txout to be locked for a number of blocks or a duration of time after its inclusion in a block.
- Pull most of CheckLockTime() out into VerifyLockTime(), a local function that will be reused for CheckSequence()
- Add bitwise AND operator to CScriptNum
- Enable CHECKSEQUENCEVERIFY as a standard script verify flag
- Transactions that fail CSV verification will be rejected from the mempool, making it easy to test the feature. However blocks containing "invalid" CSV-using transactions will still be accepted; this is *not* the soft-fork required to actually enable CSV for production use.
SequenceLocks functions are used to evaluate sequence lock times or heights per BIP 68.
The majority of this code is copied from maaku in #6312
Further credit: btcdrak, sipa, NicolasDorier
Make RPC tests have a default block priority size of 50000 (the old default) so we can still use free transactions in RPC tests. When priority is eliminated, we will have to make a different change if we want to continue allowing free txs.
