GetLocalAddrForPeer() is only called in one place. The checks inside that
function make more sense to be carried out be the caller:
- fSuccessfullyConnected is already checked at the top of
SendMessages(), so must be true when we call GetLocalAddrForPeer()
- fListen can go into the conditional before GetLocalAddrForPeer() is
called.
Gossiping addresses to peers is the responsibility of net processing.
Change AdvertiseLocal() in net to just return an (optional) address
for net processing to advertise. Update function name to reflect
new responsibility.
de6b389d5d tests: Test getaddressinfo parent_desc (Andrew Chow)
e4ac869a0a rpc: Add parent descriptor to getaddressinfo output (Andrew Chow)
bbe4a36152 wallet: Add GetDescriptorString to DescriptorScriptPubKeyMan (Andrew Chow)
9be1437c49 descriptors: Add ToNormalizedString and tests (Andrew Chow)
Pull request description:
Adds `parent_desc` field to the `getaddressinfo` RPC to export a public descriptor. Using the given address, `getaddressinfo` will look up which `DescriptorScriptPubKeyMan` can be used to produce that address. It will then return the descriptor for that `DescriptorScriptPubKeyMan` in the `parent_desc` field. The descriptor will be in a normalized form where the xpub at the last hardened step is derived so that the descriptor can be imported to other wallets. Tests are added to check that the correct descriptor is being returned for the wallet's addresses and that these descriptors can be imported and used in other wallets.
As part of this PR, a `ToNormalizedString` function is added to the descriptor classes. This really only has an effect on `BIP32PubkeyProvider`s that have hardened derivation steps. Tests are added to check that normalized descriptors are returned.
ACKs for top commit:
Sjors:
utACK de6b389d5d
S3RK:
Tested ACK de6b389
jonatack:
Tested ACK de6b389d5d modulo a few minor comments
fjahr:
Code review ACK de6b389d5d
meshcollider:
Tested ACK de6b389d5d
Tree-SHA512: a633e4a39f2abbd95afd7488484cfa66fdd2651dac59fe59f2b80a0940a2a4a13acf889c534a6948903d701484a2ba1218e3081feafe0b9a720dccfa9e43ca2b
84716b134e Add "index/blockfilterindex -> validation -> index/blockfilterindex" to expected circular dependencies (Jonas Schnelli)
ab3a0a2fb9 Add functional test for blockfilterindex in prune-mode (Jonas Schnelli)
c286a22f7b Add debug startup parameter -fastprune for more effective pruning tests (Jonas Schnelli)
5e112269c3 Avoid pruning below the blockfilterindex sync height (Jonas Schnelli)
00d57ff768 Avoid accessing nullpointer in BaseIndex::GetSummary() (Jonas Schnelli)
6abe9f5b11 Allow blockfilter in conjunction with prune (Jonas Schnelli)
Pull request description:
Maintaining the blockfilterindexes in prune mode is possible and may lead to efficient p2p based rescans of wallets (restore backups, import/sweep keys) beyond the prune height (rescans not part of that PR).
This PR allows running the blockfilterindex(es) in conjunction with pruning.
* Bitcoind/Qt will shutdown during startup when missing block data has been detected ([re]enable `-blockfilterindex` when we already have pruned)
* manual block pruning is disabled during blockfilterindex sync
* auto-pruning is delayed during blockfilterindex sync
ToDos:
* [x] Functional tests
ACKs for top commit:
fjahr:
Code review ACK 84716b1
ryanofsky:
Code review ACK 84716b134e. Only changes since last review were suggested new FindFilesToPrune argument and test.
benthecarman:
tACK 84716b134e
Tree-SHA512: 91d832c6c562c463f7ec7655c08956385413a99a896640b9737bda0183607fac530435d03d87c3c0e70c61ccdfe73fe8f3639bc7d26d33ca7e60925ebb97d77a
e829c9afbf refactor: replace sizeof(a)/sizeof(a[0]) by std::size (C++17) (Sebastian Falbesoner)
365539c846 refactor: init vectors via std::{begin,end} to avoid pointer arithmetic (Sebastian Falbesoner)
63d4ee1968 refactor: iterate arrays via C++11 range-based for loops if idx is not needed (Sebastian Falbesoner)
Pull request description:
This refactoring PR picks up the idea of #19626 and replaces all occurences of `sizeof(x)/sizeof(x[0])` (or `sizeof(x)/sizeof(*x)`, respectively) with the now-available C++17 [`std::size`](https://en.cppreference.com/w/cpp/iterator/size) (as [suggested by sipa](https://github.com/bitcoin/bitcoin/pull/19626#issuecomment-666487228)), making the macro `ARRAYLEN` obsolete.
As preparation for this, two other changes are done to eliminate `sizeof(x)/sizeof(x[0])` usage:
* all places where arrays are iterated via an index are changed to use C++11 range-based for loops If the index' only purpose is to access the array element (as [suggested by MarcoFalke](https://github.com/bitcoin/bitcoin/pull/19626#discussion_r463404541)).
* `std::vector` initializations are done via `std::begin` and `std::end` rather than using pointer arithmetic to calculate the end (also [suggested by MarcoFalke](https://github.com/bitcoin/bitcoin/pull/20429#discussion_r567418821)).
ACKs for top commit:
practicalswift:
cr ACK e829c9afbf: patch looks correct
fanquake:
ACK e829c9afbf
MarcoFalke:
review ACK e829c9afbf 🌩
Tree-SHA512: b01d32c04b9e04d562b7717cae00a651ec9a718645047a90761be6959e0cc2adbd67494e058fe894641076711bb09c3b47a047d0275c736f0b2218e1ce0d193d
Among the context menu actions for each transaction in the transactionview is the 'Edit Label' action.
While all other actions apply directly to the selected transaction, the 'Edit Label' action applies to the address of the selected transaction. This creates a confusing UX scenario where the outcome of the action is ambiguous. The action of Editing a Label should instead be reserved for the Send and Receive tabs.
This PR removes the 'Edit Label' action from the transactionview context menu. Since the 'Edit Label' action will no longer be utilized in the transactionview, the 'Edit Label' function logic is also removed.
9266f7497f util: Use std::chrono for time getters (MarcoFalke)
3c2e16be22 time: add runtime sanity check (Cory Fields)
Pull request description:
I have a followup that should remove the last of our `boost:posix_time` usage in `ParseISO8601DateTime`, but that will likely need more cross-platform testing/discussion, so have just split them up as this change is straight forward.
ACKs for top commit:
practicalswift:
Tested ACK 9266f7497f
laanwj:
Code review ACK 9266f7497f
Tree-SHA512: 5471a60e65e9fa8ef48320743ef637f1d162724e717e0f5509118e1e5732fc0844656a9c09d3d1300eb657dcc7a1e1e67305d8c9ef959c63be67393607dd4ceb
882ce25132 cli: Treat high detail levels as the maximum in -netinfo (Wladimir J. van der Laan)
Pull request description:
I somehow often type `-netinfo 5` which gets treated as `-netinfo 0`, after this change it's `-netinfo 4` which seems more convenient behavior.
ACKs for top commit:
jonatack:
ACK 882ce25132
theStack:
Tested ACK 882ce25132
Tree-SHA512: 5ed13213d00940c81f70c5fe5092f5fcc78c0184e1cc83b6c58a7bf24cf0f634816ce28f468aac588a4d202a6a7c1b411c0690099f1a8bf1999e662de4afcccd
1363b6c27d [doc / util] Use comments to clarify time unit for int64_t type. (Amiti Uttarwar)
47a7a1687d [util] Introduce a SetMockTime that takes chrono time (Amiti Uttarwar)
df6a5fc1df [util] Change GetMockTime to return chrono type instead of int (Amiti Uttarwar)
a2d908e1da [test] Throw error instead of segfaulting in failure scenario (Amiti Uttarwar)
9a3bbe8fc5 [test] Introduce a unit test helper to create a valid mempool transaction. (Amiti Uttarwar)
Pull request description:
Some miscellaneous improvements that came up when working on #21061
- The first commit is a helper to make valid mempool transactions & submit via ATMP. Introducing in this PR, using in #21061.
- The second commit is a small improvement in `miner_tests.cpp` that uses `BOOST_REQUIRE_EQUAL` to properly terminate the program instead of segfaulting in the failure scenario where the blocks do not include the expected number of transactions.
- The third commit changes the function signature of `GetMockTime()` to return a chrono type.
- The fourth & fifth commit overload `SetMockTime` to also accept chrono type, and adds documentation to indicate that the `int64_t` function signature is deprecated.
ACKs for top commit:
vasild:
ACK 1363b6c27d
Tree-SHA512: c72574d73668ea04ee4c33858f8de68b368780f445e05afb569aaf8564093f8112259b3afe93cf6dc2ee12a1ab5af1130ac73c16416132c1ba2851c054a67d78
fafddfadda scripted-diff: Remove shadowing lock annotations (MarcoFalke)
Pull request description:
Would be good to not redundantly copy the lock annotation from the class declaration to the member implementation. Otherwise it may not result in a compile failure if a new lock requirement is added to the member implementation, but not the class declaration.
ACKs for top commit:
amitiuttarwar:
ACK `fafddfadda`, confirmed that the annotations removed were all redundant. confirmed the claim of potential issue :)
hebasto:
ACK fafddfadda
jonatack:
Light utACK fafddfadda verified that the removed annotations in the definitions correspond to those in their respective declarations
Tree-SHA512: ea095c6d4e0bedd70d4e2d8a42b06cfd90c161ebfcaac13558c5dc065601a732e5f812f332104b7daa087aa57b8b0242b177799d22eef7628d77d4d87f443bf2
std::chrono::system_clock.time_since_epoch and time_t(0) are not guaranteed
to use the Unix epoch timestamp, but in practice they almost certainly will.
Any differing behavior will be assumed to be an error, unless certain
platforms prove to consistently deviate, at which point we'll cope with it
by adding offsets.
Do a quick runtime check to verify that
time_t(0) == std::chrono::system_clock's epoch time == unix epoch.
Co-authored-by: Anthony Towns <aj@erisian.com.au>
9cc8e30125 test: fix sign comparison warning in socket tests (fanquake)
Pull request description:
This fixes:
```bash
In file included from test/sock_tests.cpp:10:
In file included from /usr/local/include/boost/test/unit_test.hpp:18:
In file included from /usr/local/include/boost/test/test_tools.hpp:46:
/usr/local/include/boost/test/tools/old/impl.hpp:107:17: warning: comparison of integers of different signs: 'const long' and 'const unsigned long' [-Wsign-compare]
return left == right;
~~~~ ^ ~~~~~
```
which was introduced in #20788.
ACKs for top commit:
practicalswift:
cr ACK 9cc8e30125
vasild:
ACK 9cc8e30125
Tree-SHA512: 7069a4fde5cec01be03f8477fe396e53658f170efbf1d9ef3339d553bb90a2be9f4acd6b348127b14cd2f91426e0cd1fc35d2d3c9f201cf748c0cf50f47e46a5
If the miner code is faulty and does not include any transactions in a block,
the code segfaults when it tries to access block transactions. Instead, add a
check that safely aborts the process.
1afc0e4aa1 doc: remove potentially confusing ChainstateManager comment (James O'Beirne)
769a1ef9fd test: Add tests with maleated snapshot data (Fabian Jahr)
4d8de04f32 tests: add snapshot activation test (James O'Beirne)
31d225274f tests: add deterministic chain generation unittest fixture (James O'Beirne)
6606a4f8c6 move-onlyish: break out CreateUTXOSnapshot from dumptxoutset (James O'Beirne)
ad949ba449 txdb: don't reset during in-memory cache resize (James O'Beirne)
f6e2da5fb7 simplify ChainstateManager::SnapshotBlockhash() return semantics (James O'Beirne)
7a6c46b37e chainparams: add allowed assumeutxo values (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/master/proposal
---
This change proposes logic for activating UTXO snapshots, which is unused at the moment aside from an included unittest. There are a few moveonyish/refactoring commits to allow for halfway decent unittests.
Basic structure is included for specifying and checking the assumeutxo hash values used to validate activated snapshots. Initially I had specified a few height/hash pairs for mainnet in this change, but because of the security-critical nature of those parameters, I figured it was better to leave their inclusion to a future PR that includes only that change - my intent being that reviewers will be more likely to verify those parameters firsthand in a dedicated PR.
Aside from that and the snapshot activation logic, there are a few related changes:
- ~~allow caching the `nChainTx` value in the CCoinsViewDB; this is set during snapshot activation. Because we don't necessarily have access to the full chain at the time of snapshot load, this value is communicated through the snapshot metadata and must be cached within the chainstate to survive restarts.~~
- break out `CreateUTXOSnapshot()` from dumptxoutset. This is essentially a move-only change to allow the reuse of snapshot creation logic from within unittests.
- ...and a few other misc. changes that are solely related to unittests.
The move-onlyish commit is most easily reviewed with `--color-moved=zebra`.
ACKs for top commit:
fjahr:
Code review ACK 1afc0e4aa1
laanwj:
Code review ACK 1afc0e4aa1
Tree-SHA512: a4e4f0698f00a53ec298b5e8b7ef1c9fdf0185f95139d1b1f63cfdf6cbbd6d17b8c6e51bbf1de2e5f1a946bf49f8466232698ef55acce5a012c80b067da366ea
a5e15ae45c scripted-diff: rename ping members (John Newbery)
45dcf22661 [net processing] Move ping data fields to net processing (John Newbery)
dd2646d12c [net processing] Move ping timeout logic to net processing (John Newbery)
0b43b81f69 [net processing] Move send ping message logic into function (John Newbery)
1a07600b4b [net] Add RunInactivityChecks() (John Newbery)
f8b3058992 [net processing] Add Peer& arg to MaybeDiscourageAndDisconnect() (John Newbery)
Pull request description:
This continues the work of moving application layer data into net_processing, by moving all ping data into the new Peer object added in #19607.
For motivation, see #19398.
ACKs for top commit:
glozow:
reACK a5e15ae45c
MarcoFalke:
review ACK a5e15ae45c🥉
amitiuttarwar:
ACK a5e15ae45c
Tree-SHA512: fb84241613d6a6e1f2832fa5378030b5877a02e8308188f57ab545a6eaf2ab731a93abb7dcd3a7f7285bb66700f938096378a8e90cd6a3e6f3309f81d85a344e
ffff84a9cb fuzz: Remove expensive and redundant muhash from crypto fuzz target (MarcoFalke)
Pull request description:
Remove because it is redundant with `src/test/fuzz/muhash.cpp` and incredibly expensive
ACKs for top commit:
practicalswift:
Tested ACK ffff84a9cb
Tree-SHA512: c91ea2406db857127c789b9cdeb714a719d88b54132e9cef74fffd229532d874b6c043353793ec687504b5784afc74995f8982243d41f976b63d57454a5ed339
Moves the logic to prevent running inactivity checks until
the peer has been connected for -peertimeout time into its
own function. This will be reused by net_processing later.
96635e6177 init: use GetNetworkNames() in -onlynet help (Jon Atack)
0dbde700a6 rpc: use GetNetworkNames() in getnetworkinfo and getpeerinfo helps (Jon Atack)
1c3af37881 net: create GetNetworkNames() (Jon Atack)
b45eae4d53 net: update NET_UNROUTABLE to not_publicly_routable in GetNetworkName() (Jon Atack)
Pull request description:
per the IRC discussion today at http://www.erisian.com.au/bitcoin-core-dev/log-2021-01-19.html#l-87
- return a more helpful string name for `Network::NET_UNROUTABLE`: "not_publicly_routable" instead of "unroutable"
- update the RPC getpeerinfo "network" help, and automate it and the getnetworkinfo "network#name" and the -onlynet help doc generation
ACKs for top commit:
theStack:
re-ACK 96635e6177🌳
MarcoFalke:
review ACK 96635e6177🐗
Tree-SHA512: 511a7d987126b48a7a090739aa7c4964b6186a3ff8f5f7eec9233dd816c6b7a6dc91b3ea6b824aa68f218a8a3ebdc6ffd214e9a88af38f2bf23f3257c4284c3a
2ee4a7a9ec net: remove CNode::m_inbound_onion defaults for explicitness (Jon Atack)
24bda56c29 net: make CNode::m_inbound_onion public, drop getter, update tests (Jon Atack)
Pull request description:
Refactoring only, no change in behavior. This is a quick follow-up to #20210 to address these review comments:
- https://github.com/bitcoin/bitcoin/pull/20210#discussion_r528835313
- https://github.com/bitcoin/bitcoin/pull/20210#discussion_r550860416
- https://github.com/bitcoin/bitcoin/pull/20210#issuecomment-766093925
Changes:
- make the `CNode::m_inbound_onion class` member public, update the Doxygen comment, drop the getter, and update the tests
- remove the `CNode::m_inbound_onion` default value initialization in the ctor declaration and the member initializer in favor of always passing it explicitly to the ctor where we initialize it dynamically, to both clarify the caller code and to allow the compiler to warn if it is uninitialized in the ctor or omitted in the caller
ACKs for top commit:
MarcoFalke:
review ACK 2ee4a7a9ec🏀
vasild:
ACK 2ee4a7a9ec
Tree-SHA512: 72961c91168885a9d881756b10bad9d587f5ce297d5a6493c23e267b7178ff22b697bc6868e7761d6304e372d2781453d30011a020afd506b1e308b4ffa5feee
Can be reviewed with --word-diff-regex=.
-BEGIN VERIFY SCRIPT-
sed -i --regexp-extended 's/(PeerManagerImpl::.*\)).*LOCKS_.*\)/\1/g' ./src/net_processing.cpp
-END VERIFY SCRIPT-
6452190841 net_processing: simplify MaybeSetPeerAsAnnouncingHeaderAndIDs args (Anthony Towns)
39c2a69bc2 net_processing: move MaybeSetPeerAsAnnouncingHeadersAndIDs into PeerManagerImpl (Anthony Towns)
7b7117efd0 net_processing: simplify ProcessGetData and FindTxForGetData args (Anthony Towns)
34207b9004 net_processing: move FindTxForGetData and ProcessGetData to PeerManagerImpl (Anthony Towns)
d44084883a net_processing: simplify PeerManageImpl method args (Anthony Towns)
a490f0a056 net_processing: move MarkBlockAs*, TipMayBeStale, FindNextBlocksToDL to PeerManagerImpl (Anthony Towns)
052d9bc7e5 net_processing: simplify AlreadyHaveTx args (Anthony Towns)
eeac506250 net_processing: move AlreadyHaveTx into PeerManageImpl (Anthony Towns)
9781c08a33 net_processing: move some globals into PeerManagerImpl (Anthony Towns)
Pull request description:
Turns some globals into member variables, and simplifies the parameter list for some of net_processing's internal functions. Mostly just serves as a code cleanup at this point.
ACKs for top commit:
jnewbery:
Code review ACK 6452190841
ariard:
Code Review ACK 6452190, changes are pretty straightforward.
MarcoFalke:
Concept ACK 6452190841 I have not reviewed this, but I left a comment 🐡
Tree-SHA512: 381361f9dbfeb851a5522ead3165ce1447a0f212ddea4b483aa38975559ee5ed03a4ba69c24fd69f36847a1eddfef05785f5cbb2fcec5fe50f8b336e8047c3b1
5200929bfe depends: Include GUIX_ENVIRONMENT in id string (Carl Dong)
4c7d418588 depends: Improve id string robustness (Carl Dong)
b3bdff42b5 build: Proper quoting for var printing targets (Carl Dong)
Pull request description:
```
Environment variables and search paths can drastically effect the
operation of build tools.
Include these in our id string to mitigate against false cache hits.
```
Note to builders: This will invalidate all depends output caches in `BASE_CACHE`
ACKs for top commit:
laanwj:
re-ACK 5200929bfe
Tree-SHA512: e70c98da89cde90dc54bc3be89b925787cf94bbf246e27cc9345816b312073d78a02215448f731f21d8cf033c455234a2377ff1d66c00e1f3db69c9c9687d027
9305862f71 wallet: load flags before everything else (Sjors Provoost)
Pull request description:
Load and set wallet flags before processing other records. That way we can take them into account while processing those other records.
Suggested here:
https://github.com/bitcoin/bitcoin/pull/16546#discussion_r572334983
ACKs for top commit:
laanwj:
Code review ACK 9305862f71
gruve-p:
ACK 9305862f71
achow101:
ACK 9305862f71
Tree-SHA512: 7104523e369ce3c670571fe5e8b52c67b9ca92b8e36a2da5eb6f9f8bf8ed0544897007257204b68f6f371d682b3ef0d0635d36e6e8416ac74af1999d9fbc869c
We can't support a reset of the dbwrapper object when in-memory configuration is used
because it results in the permanent loss of coins. This only affects unittest
configurations (since that's the only place we use in-memory CCoinsViewDB instances).
Values for mainnet and testnet will be specified in a follow-up PR that can be
scrutinized accordingly. This structure is required for use in snapshot activation
logic.
fe3e993968 [p2p] No delay in adding fixed seeds if -dnsseed=0 and peers.dat is empty. Add -fixedseeds arg. (Dhruv Mehta)
Pull request description:
Closes#19795
Before PR: If `peers.dat` is empty and `-dnsseed=0`, bitcoind will fallback on to fixed seeds but only after a 60 seconds delay.
After PR: There's no 60 second delay.
To reproduce:
`rm ~/.bitcoin/peers.dat && src/bitcoind -dnsseed=0` without and with patch code
Other changes in the PR:
- `-fixedseeds` command line argument added: `-dnsseed=0 -fixedseeds=0 -addnode=X` provides a trusted peer only setup. `-dnsseed=0 -fixedseeds=0` allows for a `addnode` RPC to add a trusted peer without falling back to hardcoded seeds.
ACKs for top commit:
LarryRuane:
re-ACK fe3e993968
laanwj:
re-ACK fe3e993968
Tree-SHA512: 79449bf4e83a315be6dbac9bdd226de89d2a3f7f76d9c5640a2cb3572866e6b0e8ed67e65674c9824054cf13119dc01c7e1a33848daac6b6c34dbc158b6dba8f
060a2a64d4 ci: remove boost thread installation (fanquake)
06e1d7d81d build: don't build or use Boost Thread (fanquake)
7097add83c refactor: replace Boost shared_mutex with std shared_mutex in sigcache (fanquake)
8e55981ef8 refactor: replace Boost shared_mutex with std shared_mutex in cuckoocache tests (fanquake)
Pull request description:
This replaces `boost::shared_mutex` and `boost::unique_lock` with [`std::shared_mutex`](https://en.cppreference.com/w/cpp/thread/shared_mutex) & [`std::unique_lock`](https://en.cppreference.com/w/cpp/thread/unique_lock).
Even though [some concerns were raised](https://github.com/bitcoin/bitcoin/issues/16684#issuecomment-726214696) in #16684 with regard to `std::shared_mutex` being unsafe to use across some glibc versions, I still think this change is an improvement. As I mentioned in #21022, I also think trying to restrict standard library feature usage based on bugs in glibc is not only hard to do, but it's not currently clear exactly how we do that in practice (does it also extend to patching out use in our dependencies, should we be implementing more runtime checks for features we are using, when do we consider an affected glibc "old enough" not to worry about? etc). If you take a look through the [glibc bug tracker](https://sourceware.org/bugzilla/describecomponents.cgi?product=glibc) you'll no doubt find plenty of (active) bug reports for standard library code we already using. Obviously not to say we shouldn't try and avoid buggy code where possible.
Two other points:
[Cory mentioned in #21022](https://github.com/bitcoin/bitcoin/pull/21022#issuecomment-769274179):
> It also seems reasonable to me to worry that boost hits the same underlying glibc bug, and we've just not happened to trigger the right conditions yet.
Moving away from Boost to the standard library also removes the potential for differences related to Boosts configuration. Boost has multiple versions of `shared_mutex`, and what you end up using, and what it's backed by depends on:
* The version of Boost.
* The platform you're building for.
* Which version of `BOOST_THREAD_VERSION` is defined: (2,3,4 or 5) default=2. (see [here](https://www.boost.org/doc/libs/1_70_0/doc/html/thread/build.html#thread.build.configuration) for some of the differences).
* Is `BOOST_THREAD_V2_SHARED_MUTEX` defined? (not by default). If so, you might get the ["less performant, but more robust"](https://github.com/boostorg/thread/issues/230#issuecomment-475937761) version of `shared_mutex`.
A lot of these factors are eliminated by our use of depends, but users will have varying configurations. It's also not inconceivable to think that a distro, or some package manager might start defining something like `BOOST_THREAD_VERSION=3`. Boost tried to change the default from 2 to 3 at one point.
With this change, we no longer use Boost Thread, so this PR also removes it from depends, the build system, CI etc.
Previous similar PRs were #19183 & #20922. The authors are included in the commits here.
Also related to #21022 - pthread sanity checking.
ACKs for top commit:
laanwj:
Code review ACK 060a2a64d4
vasild:
ACK 060a2a64d4
Tree-SHA512: 572d14d8c9de20bc434511f20d3f431836393ff915b2fe9de5a47a02dca76805ad5c3fc4cceecb4cd43f3ba939a0508178c4e60e62abdbaaa6b3e8db20b75b03
de4238f92f build: consolidate reduced export checks (fanquake)
012bdec1b7 build: add building libconsensus to end-of-configure output (fanquake)
8f360e349e build: remove ax_gcc_func_attribute macro (fanquake)
f054a089ec build: remove AX_GCC_FUNC_ATTRIBUTE test for dllimport (fanquake)
7cd0a69664 build: test for __declspec(dllexport) in configure (fanquake)
1624e17b54 build: remove duplicate visibility attribute detection (fanquake)
Pull request description:
Darwin targets do not have a `protected` visibility function attribute, see [LLVM explanation](8e9a505139/clang/lib/Basic/Targets/OSTargets.h (L131)). This means that the `AX_GCC_FUNC_ATTRIBUTE` check for `visibility` fails:
```bash
configure:24513: checking for __attribute__((visibility))
configure:24537: g++ -std=c++11 -o conftest -g -O2 -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -DMAC_OSX -DOBJC_OLD_DISPATCH_PROTOTYPES=0 -Wl,-headerpad_max_install_names conftest.cpp >&5
conftest.cpp:35:56: warning: target does not support 'protected' visibility; using 'default' [-Wunsupported-visibility]
int foo_pro( void ) __attribute__((visibility("protected")));
^
1 warning generated.
configure:24537: $? = 0
configure:24550: result: no
```
This leads to `EXPORT_SYMBOL` being [defined to nothing](f4de89edfa/src/script/bitcoinconsensus.h (L29)), as `HAVE_FUNC_ATTRIBUTE_VISIBILITY` is not defined, and when building with reduced exports, you end up with a libbitcoinconsensus.dylib that doesn't export any `_bitcoinconsensus_*` symbols.
```bash
➜ git:(master) nm -C src/.libs/libbitcoinconsensus.dylib | rg _bitcoinconsensus_
➜ git:(master)
```
We do have a [second check](f4de89edfa/configure.ac (L882)) for the `visibility` attribute, which works for Darwin as it's only testing for default visibility, however the result of this check isn't used at all. It was added in #4725, along with the `--enable-reduce-exports` option, however when libbitcoinconsensus was added in #5235, it used the results of the added `AX_GCC_FUNC_ATTRIBUTE` calls.
This PR removes our usage of the AX_GCC_FUNC_ATTRIBUTE macro entirely, in favour of our own checks in configure. This meant adding a check for `dllexport`, which I've tested as working with both [GCC](https://gcc.gnu.org/onlinedocs/gcc/Microsoft-Windows-Function-Attributes.html) and [Clang](https://releases.llvm.org/10.0.0/tools/clang/docs/AttributeReference.html#dllexport) when building for Windows. I haven't added an equivalent check for `dllimport`, as we weren't actually using the result of that check, we're just testing that `MSC_VER` was defined before using.
With these changes building a libbitcoinconsensus with reduced exports, when targeting Darwin, works as expected:
```bash
./autogen.sh
./configure --disable-tests --disable-bench --with-utils=no --with-daemon=no --with-gui=no --disable-wallet --with-libs=yes --enable-reduce-exports
make -j8
...
nm -C src/.libs/libbitcoinconsensus.dylib | rg _bitcoinconsensus_
000000000000a340 T _bitcoinconsensus_verify_script
00000000000097e0 T _bitcoinconsensus_verify_script_with_amount
000000000000a3c0 T _bitcoinconsensus_version
```
```python
>>> import ctypes
>>> consensus = ctypes.CDLL("src/.libs/libbitcoinconsensus.dylib")
>>> print(consensus.bitcoinconsensus_version())
1
>>> exit()
```
TODO: Modify a CI job to compile with --enable-reduce-exports and check for symbols in shared lib?
ACKs for top commit:
laanwj:
Code review ACK de4238f92f
Tree-SHA512: d148f3c55d14dac6e9e5b718cc65bb557bcf6f663218d24bc9044b86281bd5dd3d931ebea79c336a58e8ed50d683218c0a9e75494f2267b91097665043e252ae
e987ae5a55 test: Add test for deterministic UTXO set hash results (Fabian Jahr)
6ccc8fc067 test: Add test for gettxoutsetinfo RPC with MuHash (Fabian Jahr)
0d3b2f643d rpc: Add hash_type MUHASH to gettxoutsetinfo (Fabian Jahr)
2474645f3b refactor: Separate hash and stats calculation in coinstats (Fabian Jahr)
a1fcceac69 refactor: Improve encapsulation between MuHash3072 and Num3072 (Fabian Jahr)
Pull request description:
This is another Pr in the series PRs for Coinstatsindex (see overview in #18000). This PR adds the `hash_type` option `muhash` to `gettxoutsetinfo` through which the user can calculate the serialized muhash of the utxo set. This PR does not use the index yet.
ACKs for top commit:
Sjors:
tACK e987ae5
achow101:
ACK e987ae5a55
jonatack:
Tested re-ACK e987ae5a55 per `git diff 3506d90 e987ae5`, reviewed diff, debug built, ran gettxoutsetinfo -signet and help on this branch vs master, at height 23127 both returned `hash_serialized_2` of `2b72d65f3b6efb2311f58374ea2b939abf49684d44f4bafda45faa3b5452a454` and this branch returned `muhash` of `c9f1ff12d345ccf9939c6bbf087e6f7399b6115adee1569287e9c5c43dbb475c`
ryanofsky:
Code review ACK e987ae5a55. Looks very good. I left one suggestion to simplify code, but feel free to ignore it here and maybe consider it for later since PR has already had a lot of review.
Tree-SHA512: 9a739ce375e73749fa69a467262b60d3e5314ef384e2d7150b3bbc8e4125cd9fd1db95306623bb9a632fcbaf5d9d2bf2f5cc43bf717d4ff5e2c9c4b52dd9296c
This fixes:
```bash
In file included from test/sock_tests.cpp:10:
In file included from /usr/local/include/boost/test/unit_test.hpp:18:
In file included from /usr/local/include/boost/test/test_tools.hpp:46:
/usr/local/include/boost/test/tools/old/impl.hpp:107:17: warning: comparison of integers of different signs: 'const long' and 'const unsigned long' [-Wsign-compare]
return left == right;
~~~~ ^ ~~~~~
```
which was introduced in #20788.
We are already testing for this, and our test works correctly with a Darwin
target, where the macro does not. Darwin targets do not support "protected"
visibility.
25f899cc23 log: Move "Pre-allocating up to position 0x[...] in [...].dat" log message to debug category (practicalswift)
acd7980b37 log: Move "Leaving block file [...]: [...]" log message to debug category (practicalswift)
Pull request description:
Move `Pre-allocating up to position 0x[…] in […].dat` log message to debug category.
After the cleanup of `-debug=net` log messages PR (#20724) was merged recently the console log now has very high signal to noise ratio. That's great! :)
This PR increases the signal to noise ratio slightly more by moving the most common remaining implementation detail log message (`Pre-allocating up to position 0x[…] in […].dat`) to the debug category where it belongs :)
Expected standard output from `bitcoind` (when in steady state) before this patch:
```
$ src/bitcoind
…
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z Pre-allocating up to position 0x0000000 in blk00000.dat
0000-00-00T00:00:00Z Pre-allocating up to position 0x000000 in rev00000.dat
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
```
Expected standard output from `bitcoind` (when in steady state) after this patch:
```
$ src/bitcoind
…
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
0000-00-00T00:00:00Z UpdateTip: new best=0000000000000000000000000000000000000000000000000000000000000000 height=000000 version=0x00000000 log0_work=00.000000 tx=000000000 date='0000-00-00T00:00:00Z' progress=0.000000 cache=000.0MiB(0000000txo)
```
I find the latter alternative much easier to visually scan for anomalies (and more aesthetically pleasing TBH!).
Non-GUI users deserve nice interfaces too :)
ACKs for top commit:
laanwj:
ACK 25f899cc23
Tree-SHA512: 5970798c41b041527ebdcbd843c5e136c257c28c3b21fc74102da8970406ca5c0c7e406305c5e6e67de5c1708dc1858af07a77a2e05f44159b7103423e8ab32f
fabce459bb fuzz: version handshake (MarcoFalke)
Pull request description:
Not fuzzing the version handshake will limit fuzz coverage
ACKs for top commit:
practicalswift:
cr ACK fabce459bb: patch looks very much correct
Tree-SHA512: 4091d27d39edee781d033e471b352084bb54df250d0890e4821a325926a44dff9b26a2614d67dd0529f73bd366b075d7a0a1a570c2837de286a1b93a59a8fb91
53e716ea11 [refactor] improve style for touched code (gzhao408)
174cb5330a [refactor] const ATMPArgs and non-const Workspace (gzhao408)
f82baf0762 [refactor] return MempoolAcceptResult (gzhao408)
9db10a5506 [refactor] clean up logic in testmempoolaccept (gzhao408)
Pull request description:
This is the first 4 commits of #20833, and does refactoring only. It should be relatively simple to review, and offers a few nice things:
- It makes accessing values that don't make sense (e.g. fee) when the tx is invalid an error.
- Returning `MempoolAcceptResult` from ATMP makes the interface cleaner. The caller can get a const instead of passing in a mutable "out" param.
- We don't have to be iterating through a bunch of lists for package validation, we can just return a `std::vector<MempoolAcceptResult>`.
- We don't have to refactor all ATMP call sites again if/when we want to return more stuff from it.
ACKs for top commit:
MarcoFalke:
ACK 53e716ea11💿
jnewbery:
Code review ACK 53e716ea11
ariard:
Code Review ACK 53e716e, I did tweak a bit the touched paths to see if we had good test coverage. Didn't find holes.
Tree-SHA512: fa6ec324a08ad9e6e55948615cda324cba176255708bf0a0a0f37cedb7a75311aa334ac6f223be7d8df3c7379502b1081102b9589f9a9afa1713ad3d9ab3c24f
615ba0eb96 test: add Sock unit tests (Vasil Dimov)
7bd21ce1ef style: rename hSocket to sock (Vasil Dimov)
04ae846904 net: use Sock in InterruptibleRecv() and Socks5() (Vasil Dimov)
ba9d73268f net: add RAII socket and use it instead of bare SOCKET (Vasil Dimov)
dec9b5e850 net: move CloseSocket() from netbase to util/sock (Vasil Dimov)
aa17a44551 net: move MillisToTimeval() from netbase to util/time (Vasil Dimov)
Pull request description:
Introduce a class to manage the lifetime of a socket - when the object
that contains the socket goes out of scope, the underlying socket will
be closed.
In addition, the new `Sock` class has a `Send()`, `Recv()` and `Wait()`
methods that can be overridden by unit tests to mock the socket
operations.
The `Wait()` method also hides the
`#ifdef USE_POLL poll() #else select() #endif` technique from higher
level code.
ACKs for top commit:
laanwj:
Re-ACK 615ba0eb96
jonatack:
re-ACK 615ba0eb96
Tree-SHA512: 3003e6bc0259295ca0265ccdeb1522ee25b4abe66d32e6ceaa51b55e0a999df7ddee765f86ce558a788c1953ee2009bfa149b09d494593f7d799c0d7d930bee8
3ddbf22ed1 util: Disallow negative mocktime (MarcoFalke)
f5f2f97168 net: Avoid UBSan warning in ProcessMessage(...) (practicalswift)
Pull request description:
Avoid UBSan warning in `ProcessMessage(...)`.
Context: https://github.com/bitcoin/bitcoin/pull/20380#issuecomment-770427182 (thanks Crypt-iQ!)
ACKs for top commit:
MarcoFalke:
re-ACK 3ddbf22ed1 only change is adding patch written by me
ajtowns:
ACK 3ddbf22ed1 -- code review only
Tree-SHA512: e8d7af0457ca86872b75a4e406c0a93aafd841c2962e244e147e748cc7ca118c56be0fdafe53765f4b291410030b2c3cc8f76f733b37a955d34fc885ab6037b9
fa650ca7f1 Use -Wswitch for TxoutType where possible (MarcoFalke)
fa59e0b5bd test: Add missing script_standard_Solver_success cases (MarcoFalke)
Pull request description:
This removes unused `default:` cases for all `switch` statements on `TxoutType` and adds the cases (`MULTISIG`, `NULL_DATA`, `NONSTANDARD`) to `ExtractDestination` for clarity.
Also, the compiler is now able to use `-Wswitch`.
ACKs for top commit:
practicalswift:
cr ACK fa650ca7f1: patch looks correct and `assert(false);` is better than UB :)
hebasto:
ACK fa650ca7f1, I have reviewed the code and it looks OK, I agree it can be merged.
Tree-SHA512: 282458b6523bd8923a0c0f5c423d1db2dce2a2d1b1d1dae455415c6fc995bb41ce82c1f9b0a1c0dcc6d874d171e04c30eca585f147582f52c7048c140358630a
fac726b1b8 doc: Fixup docs in fuzz/script_assets_test_minimizer.cpp (MarcoFalke)
fafca47adc fuzz: Hide script_assets_test_minimizer (MarcoFalke)
Pull request description:
This is not an actual fuzz target. It is a hack to exploit the built-in capability of fuzz engines to measure coverage.
ACKs for top commit:
practicalswift:
cr ACK fac726b1b8: patch looks correct and touches only `src/test/fuzz/`
Tree-SHA512: 0652dd8d9e95746b0906be4044467435d8204a34a30366ae9bdb75b9cb0788d429db7cedf2760fd543565d9d4f7ee206873ed10a29dd715a792a26337f65b53c
fa2c521115 Deduplicate some block-to-JSON code. (Daniel Kraft)
Pull request description:
Some of the logic converting blocks and block headers to JSON for the blockchain RPC methods (`getblock`, `getlockheader`) was duplicated. Instead of that, the `blockToJSON` RPC method now calls `blockheaderToJSON` first, and then fills in the missing, block-specific bits explicitly.
ACKs for top commit:
laanwj:
Code review ACK fa2c521115
Tree-SHA512: 1b9b269e251d9c8c1056f253cfc2a795170d609f4c26ecc85b1ff9cdd567095a673dd89564e0d587b32dfc152ea01b2682169b018f2c9c3004c511a9998d772e
In the arguments of `InterruptibleRecv()`, `Socks5()` and
`ConnectThroughProxy()` the variable `hSocket` was previously of type
`SOCKET`, but has been changed to `Sock`. Thus rename it to `sock` to
imply its type, to distinguish from other `SOCKET` variables and to
abide to the coding style wrt variables' names.
Use the `Sock` class instead of `SOCKET` for `InterruptibleRecv()` and
`Socks5()`.
This way the `Socks5()` function can be tested by giving it a mocked
instance of a socket.
Co-authored-by: practicalswift <practicalswift@users.noreply.github.com>
Introduce a class to manage the lifetime of a socket - when the object
that contains the socket goes out of scope, the underlying socket will
be closed.
In addition, the new `Sock` class has a `Send()`, `Recv()` and `Wait()`
methods that can be overridden by unit tests to mock the socket
operations.
The `Wait()` method also hides the
`#ifdef USE_POLL poll() #else select() #endif` technique from higher
level code.
Move `CloseSocket()` (and `NetworkErrorString()` which it uses) from
`netbase.{h,cpp}` to newly added `src/util/sock.{h,cpp}`.
This is necessary in order to use `CloseSocket()` from a newly
introduced Sock class (which will live in `src/util/sock.{h,cpp}`).
`sock.{h,cpp}` cannot depend on netbase because netbase will depend
on it.
Move `MillisToTimeval()` from `netbase.{h,cpp}` to
`src/util/system.{h,cpp}`.
This is necessary in order to use `MillisToTimeval()` from a newly
introduced `src/util/sock.{h,cpp}` which cannot depend on netbase
because netbase will depend on it.
059e8ccc1e Change BOOST_CHECK to BOOST_CHECK_EQUAL to see mismatched values when a check fails. (Kiminuo)
Pull request description:
This is useful to see mismatched values when a check fails as specified in the [Boost documentation](https://www.boost.org/doc/libs/1_71_0/libs/test/doc/html/boost_test/utf_reference/testing_tool_ref/assertion_boost_level.html).
This PR would make #20744 PR's diff smaller by a bit.
ACKs for top commit:
MarcoFalke:
review ACK 059e8ccc1e
theStack:
Code Review ACK 059e8ccc1e
Tree-SHA512: 82359ef38e0d1926f12a34aeff6fde6d1d307c703a080547749b908f873c2a2f894f6f094c33470b32987c229e3a1f17f7d1e877663c53293c023bde0e7272c1
Some of the logic converting blocks and block headers to JSON for
the blockchain RPC methods (getblock, getlockheader) was duplicated.
Instead of that, the blockToJSON RPC method now calls blockheaderToJSON
first, and then fills in the missing, block-specific bits explicitly.
1bca2aa694 Introduce GetUniquePath(base) helper method to replace boost::filesystem::unique_path() which is not available in std::filesystem. (Kiminuo)
Pull request description:
This PR makes it easier in #20744 to remove our dependency on the `boost::filesystem::unique_path()` function which does not have a direct equivalent in C++17.
This PR attempts to re-implement `boost::filesystem::unique_path()` as `GetUniquePath(path)` but the implementations are not meant to be the same.
Note:
* Boost 1.75.0 implementation of `unique_path`: 9cab675b71/src/unique_path.cpp (L235)
* In the previous implementation, I attempted to add:
```cpp
fs::path GetUniquePath(const fs::path& base)
{
FastRandomContext rnd;
fs::path tmpFile = base / HexStr(rnd.randbytes(8));
return tmpFile;
}
```
to `fs.cpp` but this leads to a circular dependency: "fs -> random -> logging -> fs". That is why the modified implementation adds a new file.
ACKs for top commit:
laanwj:
Code review ACK 1bca2aa694
ryanofsky:
Code review ACK 1bca2aa694. It's a simple change and extra test coverage is nice
Tree-SHA512: f324bdf0e254160c616b5033c3ece33d87db23eb0135acee99346ade7b5cf0d30f3ceefe359a25a8e9b53ba8e4419f459c2bdd369e10fc0152ce95031d1f221c
This creates a cleaner interface with ATMP, allows us to make results const,
and makes accessing values that don't make sense (e.g. fee when tx is
invalid) an error.
4676a4fb5b [addrman] Don't repeat "Bucketing method was updated" log multiple times (John Newbery)
436292367c [addrman] Improve serialization comments (John Newbery)
ac3547eddd [addrman] Improve variable naming/code style of touched code. (John Newbery)
a5c9b04959 [addrman] Don't rebucket new table entries unnecessarily (John Newbery)
8062d928ce [addrman] Rename asmap version to asmap checksum (John Newbery)
009b8e0fdf [addrman] Improve variable naming/code style of touched code. (John Newbery)
b4c5fda417 [addrman] Fix new table bucketing during unserialization (John Newbery)
Pull request description:
This fixes three issues in addrman unserialization.
1. An addrman entry can appear in up to 8 new table buckets. We store this entry->bucket indexing during shutdown so that on restart we can restore the entries to their correct buckets. Commit ec45646de9 broke the deserialization code so that each entry could only be put in up to one new bucket.
2. Unserialization may result in an entry appearing in a 9th bucket. If the entry already appears in 8 buckets don't try to place it in another bucket.
3. We unnecessarily rebucket when reading a peers.dat with file version 1. Don't do that.
ACKs for top commit:
vasild:
ACK 4676a4fb5b
glozow:
re-ACK 4676a4fb5b, changes were a rename, comments, and removing repeat-logging.
naumenkogs:
ACK 4676a4f
laanwj:
Code review ACK 4676a4fb5b
dhruv:
ACK 4676a4fb5b
ryanofsky:
Code review ACK 4676a4fb5b. I'm not previously familiar with this code but all the changes here do make sense and seem like improvements. Left some notes and comments, but they aren't important so feel to ignore.
Tree-SHA512: b228984f6dec5910be23c3740ae20258da33bcf66ceb7edb10e5a53163450f743bab349e47f09808b7e8d40f27143119ec3e0981d7e678aa494d8559a1c99c23
723eb4326b test: Fix Windows cross build (Hennadii Stepanov)
Pull request description:
On master (e51f6c4dee, after #20936 merge), Windows cross compiling fails:
```
$ make > /dev/null
In file included from ./policy/fees.h:12,
from policy/fees.cpp:6:
policy/fees.cpp: In member function ‘unsigned int CBlockPolicyEstimator::HighestTargetTracked(FeeEstimateHorizon) const’:
./sync.h:232:104: warning: control reaches end of non-void function [-Wreturn-type]
232 | #define LOCK(cs) DebugLock<decltype(cs)> PASTE2(criticalblock, __COUNTER__)(cs, #cs, __FILE__, __LINE__)
| ^
policy/fees.cpp:680:5: note: in expansion of macro ‘LOCK’
680 | LOCK(m_cs_fee_estimator);
| ^~~~
test/fuzz/netaddress.cpp:12:10: fatal error: netinet/in.h: No such file or directory
12 | #include <netinet/in.h>
| ^~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [Makefile:13039: test/fuzz/fuzz-netaddress.o] Error 1
make[2]: *** Waiting for unfinished jobs....
libtool: warning: undefined symbols not allowed in x86_64-w64-mingw32 shared libraries; building static only
test/fuzz/string.cpp: In function ‘void string_fuzz_target(FuzzBufferType)’:
test/fuzz/string.cpp:81:11: error: ‘ShellEscape’ was not declared in this scope
81 | (void)ShellEscape(random_string_1);
| ^~~~~~~~~~~
make[2]: *** [Makefile:13543: test/fuzz/fuzz-string.o] Error 1
make[1]: *** [Makefile:15078: all-recursive] Error 1
make: *** [Makefile:812: all-recursive] Error 1
```
This PR fixes both of errors.
ACKs for top commit:
MarcoFalke:
cr ACK 723eb4326b
Tree-SHA512: 5d2fba5ca806e64bf92011786d1f868c6624f786bfa753a10316feab7a802a28ec27a4bd25fc26dc289a399895a521c3878ffa1efeff0e540c7245cdb8e4942c
fa362064e3 rpc: Return total fee in mempool (MarcoFalke)
Pull request description:
This avoids having to loop over the whole mempool to query each entry's fee
ACKs for top commit:
achow101:
ACK fa362064e3
glozow:
ACK fa362064e3🧸
jnewbery:
ACK fa362064e3
Tree-SHA512: e2fa1664df39c9e187f9229fc35764ccf436f6f75889c5a206d34fff473fc21efbf2bb143f4ca7895c27659218c22884d0ec4195e7a536a5a96973fc9dd82d08
This fixes issue #19388. The changes are as follows:
- Add a new flag to configure, --enable-fuzz-binary, which allows building test/fuzz/fuzz regardless of whether we are building to do actual fuzzing
- Set -DPROVIDE_MAIN_FUNCTION whenever --enable-fuzz is no
- Add the following libraries to FUZZ_SUITE_LD_COMMON:
- LIBBITCOIN_WALLET
- SQLLITE_LIBS
- BDB_LIBS
- if necessary, some or all of:
- NATPMP_LIBS
- MINIUPNPC_LIBS
- LIBBITCOIN_ZMQ / ZMQ_LIBS
506e6585a5 gui: display plain "Inbound" in peer details (Jon Atack)
Pull request description:
Alternative version to #201.
ACKs for top commit:
MarcoFalke:
ACK 506e6585a5
jonasschnelli:
utACK 506e6585a5
Tree-SHA512: 88d141b14684c1dcdff47f7ba241e5a7c42c14da3d9aaa89f1649235a64fd26bc5a6055707dc07992cd9d8c05d143754f6dd51ccee69fd4309336dd07c52e61c
faf7d7418c fuzz: Avoid extraneous copy of input data, using Span<> (MarcoFalke)
Pull request description:
Seeing speedup here in the fuzz framework part (non-fuzz-target part). Speedup is only visible for input data larger than 100kB.
ACKs for top commit:
practicalswift:
cr ACK faf7d7418c: patch looks correct :)
laanwj:
Code review ACK faf7d7418c
Tree-SHA512: 41af7118846e0dfee237a6d5269a6c7cfbc775d7bd1cc2a85814cb60f6c2b37fe7fd35f1a788d4f08e6e0202c48b71054b67d2931160c445c79fc59e5347dadf
747cb5b994 netinfo: display only outbound block relay counts (Jon Atack)
76d198a5c1 netinfo: add i2p network (Jon Atack)
9d6aeca2c5 netinfo: add bip152 high-bandwidth to/from fields (Jon Atack)
5de7a6cf63 netinfo: display manual peers count (Jon Atack)
d3cca3be63 netinfo: update to use peer connection types (Jon Atack)
62bf5b7850 netinfo: add ConnectionTypeForNetinfo member helper function (Jon Atack)
Pull request description:
Merry Bitcoin Christmas! Ho ho ho 🎄✨
This PR updates `-netinfo` to:
- use the getpeerinfo `connection_type` field (and no longer use getpeerinfo `relaytxes` for block-relay detection)
- display manual peers count, if any, in the outbound row
- display the block relay counts in the outbound row only
- display high-bandwidth BIP152 compact block relay peers (`hb` column, to `.` and from `*`)
- add support for displaying I2P network peers, if any are present
Testing and review welcome! How to test:
- to run the full live dashboard (on Linux): `$ watch --interval 1 --no-title ./src/bitcoin-cli -netinfo 4`
- to run the full dashboard: ``$ ./src/bitcoin-cli -netinfo 4``
- to see the help: `$ ./src/bitcoin-cli -netinfo help`
- to see the help summary: `$ ./src/bitcoin-cli -help | grep -A4 netinfo`
ACKs for top commit:
laanwj:
re-ACK 747cb5b994
michaelfolkson:
ACK 747cb5b994
jonasschnelli:
Tested ACK 747cb5b994 - works nicely. Great that this PR only changes bitcoin-cli.
Tree-SHA512: 48fe23dddf3005a039190fcbc84167cd25b0a63489617fe14ea5db9a641a829b46b6e8dc7924aab6577d82a13909d157e82f715bd2ed3a8a15071957c35c19f3
e1e6714832 doc: refer to BIPs 339/155 in feature negotiation (Jon Atack)
Pull request description:
of `wtxidrelay` and `addrv2`/`sendaddrv2`, and add `fSuccessfullyConnected` doxygen documentation to clarify that it is set to true on VERACK.
ACKs for top commit:
laanwj:
re-ACK e1e6714832
Tree-SHA512: 3e6af5b246e4ee1ec68ee34db525746717871bc986ad4840f5a8edce55740768389f6fd0ec69046eda2fb4c69939440a96571f79d36e6cbff4fd3b7f2ebc74c0
eecb7ab105 [doc] clarify -peertimeout and -timeout descriptions (gzhao408)
Pull request description:
The debug-only option `-peertimeout` is used to delay `InactivityCheck()`, whereas the `-timeout` option specifies socket timeouts (`nConnectTimeout`). The current descriptions are a bit misleading and hard to tell apart. I think it would save dev/review time to update them 🤷
ACKs for top commit:
MarcoFalke:
ACK eecb7ab105 nice doc fixup
jnewbery:
ACK eecb7ab105
Tree-SHA512: 71d2e6c31664b9f7f0b053ecf3be21c6c55472553fa7478d8526ba3be8d54979bceafca63d87b8b2488c11f409c332ac795da613ff8101546b18d9cd8bcceb50
20677ffa22 validation: Guard all chainstates with cs_main (Carl Dong)
Pull request description:
```
This avoids a potential race-condition where a thread is reading the
ChainstateManager::m_active_chainstate pointer while another one is
writing to it. There is no portable guarantee that reading/writing the
pointer is thread-safe.
This is also done in way that mimics ::ChainstateActive(), so the
transition from that function to this method is easy.
More discussion:
1. https://github.com/bitcoin/bitcoin/pull/20749#discussion_r559544027
2. https://github.com/bitcoin/bitcoin/pull/19806#discussion_r561023961
3. https://github.com/bitcoin/bitcoin/pull/19806#issuecomment-768946522
4. https://github.com/bitcoin/bitcoin/pull/19806#issuecomment-768955695
```
Basically this PR removes the loaded-but-unfired footgun, which:
- Is multiplied (but still unshot) in the chainman deglobalization PRs (#20158)
- Is shot in the test framework in the au.activate PR (#19806)
ACKs for top commit:
jnewbery:
code review ACK 20677ffa22. I've verified by eye that neither of these members are accessed without cs_main.
ryanofsky:
Code review ACK 20677ffa22. It is safer to have these new `GUARDED_BY` annotations and locks than not to have them, but in the longer run I think every `LOCK(cs_main)` added here and added earlier in f92dc6557a from #20749 should be removed and replaced with `EXCLUSIVE_LOCKS_REQUIRED(cs_main)` on the accessor methods instead. `cs_main` is a high level lock that should be explicitly acquired at a high level to prevent the chain state from changing. It shouldn't be acquired recursively in low-level methods just to read pointer values atomically.
Tree-SHA512: 68a3a46d79a407b774eab77e1d682a97e95f1672db0a5fcb877572e188bec09f3a7b47c5d0cc1f2769ea276896dcbe97cb35c861acf7d8e3e513e955dc773f89
fa61b9d1a6 util: Add ArgsManager::GetCommand() and use it in bitcoin-wallet (MarcoFalke)
7777105a24 refactor: Move all command dependend checks to ExecuteWalletToolFunc (MarcoFalke)
fa06bce4ac test: Add tests (MarcoFalke)
fac05ccdad wallet: [refactor] Pass ArgsManager to WalletAppInit (MarcoFalke)
Pull request description:
This not only moves the parsing responsibility out from the wallet tool, but it also makes it easier to implement bitcoin-util #19937Fixes: #20902
ACKs for top commit:
ajtowns:
ACK fa61b9d1a6
fjahr:
Code review ACK fa61b9d1a6
Tree-SHA512: 79622b806e8bf9dcd0dc24a8a6687345710df57720992e83a41cd8d6762a6dc112044ebc58fcf6e8fbf45de29a79b04873c5b8c2494a1eaaf902a2884703e47b
the i2p peer counts column is displayed iff the node is connected
to at least one i2p peer, so this doesn't add clutter for users
who are not running an i2p service
572fd0f738 doc: More precise -debug and -debugexclude doc (wodry)
Pull request description:
I wondered how one could enable debug logging with `-debug=<category>` for multiple categories. Found out solution is to specify that option multiple times for each wanted category.
This PR documents this behavior and uses the same wording for the same behavior of `-debugexclude=<category>` to make that also clear and stringent.
ACKs for top commit:
laanwj:
ACK 572fd0f738
MarcoFalke:
ACK 572fd0f738
theStack:
ACK 572fd0f738
Tree-SHA512: 8d93db37602fd5ff4247e7c11478e55b99c0e3d47eaa2bb901937805d8f2a466b3a198b713b760981c5411576b74c52e2909c46c6d3f2e0e04215fd521b65cf7
bff7c66e67 Add documentation to contrib folder (Troy Giorshev)
381f77be85 Add Message Capture Test (Troy Giorshev)
e4f378a505 Add capture parser (Troy Giorshev)
4d1a582549 Call CaptureMessage at appropriate locations (Troy Giorshev)
f2a77ff97b Add CaptureMessage (Troy Giorshev)
dbf779d5de Clean PushMessage and ProcessMessages (Troy Giorshev)
Pull request description:
This PR introduces per-peer message capture into Bitcoin Core. 📓
## Purpose
The purpose and scope of this feature is intentionally limited. It answers a question anyone new to Bitcoin's P2P protocol has had: "Can I see what messages my node is sending and receiving?".
## Functionality
When a new debug-only command line argument `capturemessages` is set, any message that the node receives or sends is captured. The capture occurs in the MessageHandler thread. When receiving a message, it is captured as soon as the MessageHandler thread takes the message off of the vProcessMsg queue. When sending, the message is captured just before the message is pushed onto the vSendMsg queue.
The message capture is as minimal as possible to reduce the performance impact on the node. Messages are captured to a new `message_capture` folder in the datadir. Each node has their own subfolder named with their IP address and port. Inside, received and sent messages are captured into two binary files, msgs_recv.dat and msgs_sent.dat, like so:
```
message_capture/203.0.113.7:56072/msgs_recv.dat
message_capture/203.0.113.7:56072/msgs_sent.dat
```
Because the messages are raw binary dumps, included in this PR is a Python parsing tool to convert the binary files into human-readable JSON. This script has been placed on its own and out of the way in the new `contrib/message-capture` folder. Its usage is simple and easily discovered by the autogenerated `-h` option.
## Future Maintenance
I sympathize greatly with anyone who says "the best code is no code".
The future maintenance of this feature will be minimal. The logic to deserialize the payload of the p2p messages exists in our testing framework. As long as our testing framework works, so will this tool.
Additionally, I hope that the simplicity of this tool will mean that it gets used frequently, so that problems will be discovered and solved when they are small.
## FAQ
"Why not just use Wireshark"
Yes, Wireshark has the ability to filter and decode Bitcoin messages. However, the purpose of the message capture added in this PR is to assist with debugging, primarily for new developers looking to improve their knowledge of the Bitcoin Protocol. This drives the design in a different direction than Wireshark, in two different ways. First, this tool must be convenient and simple to use. Using an external tool, like Wireshark, requires setup and interpretation of the results. To a new user who doesn't necessarily know what to expect, this is unnecessary difficulty. This tool, on the other hand, "just works". Turn on the command line flag, run your node, run the script, read the JSON. Second, because this tool is being used for debugging, we want it to be as close to the true behavior of the node as possible. A lot can happen in the SocketHandler thread that would be missed by Wireshark.
Additionally, if we are to use Wireshark, we are at the mercy of whoever it maintaining the protocol in Wireshark, both as to it being accurate and recent. As can be seen by the **many** previous attempts to include Bitcoin in Wireshark (google "bitcoin dissector") this is easier said than done.
Lastly, I truly believe that this tool will be used significantly more by being included in the codebase. It's just that much more discoverable.
ACKs for top commit:
MarcoFalke:
re-ACK bff7c66e67 only some minor changes: 👚
jnewbery:
utACK bff7c66e67
theStack:
re-ACK bff7c66e67
Tree-SHA512: e59e3160422269221f70f98720b47842775781c247c064071d546c24fa7a35a0e5534e8baa4b4591a750d7eb16de6b4ecf54cbee6d193b261f4f104e28c15f47
Since these chainstates are:
1. Also vulnerable to the race condition described in the previous
commit
2. Documented as having similar semantics as m_active_chainstate
we should also protect them with ::cs_main.
b6aadcd5b4 build: Add -Werror=mismatched-tags (Hennadii Stepanov)
1485124291 Fix -Wmismatched-tags warnings (Hennadii Stepanov)
Pull request description:
Warnings were introduced in #20749:
```
./validation.h:43:1: warning: class 'CCheckpointData' was previously declared as a struct; this is valid, but may result in linker errors under the Microsoft C++ ABI [-Wmismatched-tags]
class CCheckpointData;
^
./chainparams.h:24:8: note: previous use is here
struct CCheckpointData {
^
./validation.h:43:1: note: did you mean struct here?
class CCheckpointData;
^~~~~
struct
1 warning generated.
```
This change fixes AppVeyor build: https://ci.appveyor.com/project/DrahtBot/bitcoin/builds/37547435
ACKs for top commit:
glozow:
utACK b6aadcd5b4🚗
practicalswift:
cr ACK b6aadcd5b4: patch looks correct
Tree-SHA512: 3ac887ebdbf9a1ae33c1fd5381b3b8d83388ad557ddeb55013acd42bb9752a5bd009e3a0eed52644a023a7a0dda1c159277981af82f58fb0abfe60b84e01bf29
I wondered how one could enable debug logging with `-debug=<category>` for multiple categories. Found out solution is to specify that option multiple times for each wanted category.
This PR documents this behavior and uses the same wording for the same behavior of `-debugexclude=<category>` to make that also clear and stringent.
