This moves the CBlockPolicyEstimator to the NodeContext, which get rids
of two globals and allows us to conditionally create the
CBlockPolicyEstimator (and to remove a circular dep).
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
f15e780b9e refactor: Clean up CTxMemPool initializer list (Elle Mouton)
e3310692d0 refactor: Make CTxMemPool::m_check_ratio a const and a constructor argument (Elle Mouton)
9d4b4b2c2c refactor: Avoid double to int cast for nCheckFrequency (Elle Mouton)
Pull request description:
This PR cleans up the CTxMemPool interface by including the ratio used to determine when a mempool sanity check should run in the constructor of CTxMempool instead of using nCheckFrequency which required a cast from a double to a uint32_t. Since nCheckFrequency (now called m_check_ratio) is set in the constructor and only every read from there after, it can be turned into a const and no longer needs to be guarded by the 'cs' lock.
Since nCheckFrequency/m_check_ratio no longer needs to lock the 'cs' mutux, mutex lock line in the "CTxMempool::check" function can be moved below where the m_check_ratio variable is checked. Since the variable is 0 by default (meaning that "CTxMempool::check" will most likely not run its logic) this saves us from unnecessarily grabbing the lock.
ACKs for top commit:
jnewbery:
utACK f15e780b9e
MarcoFalke:
ACK f15e780b9e👘
glozow:
utACK f15e780b9e
theStack:
Code Review ACK f15e780b9e
Tree-SHA512: d83f3b5311ca128847b621e5e999c7e1bf0f4e6261d4cc090fb13e229a0f7eecd66ad997f654f50a838baf708d1515740aa3bffc244909a001d01fd5ae398b68
ea93bbeb26 init: Fix incorrect warning "Reducing -maxconnections from N to N-1, because of system limitations" (practicalswift)
Pull request description:
Fix incorrect warning `Reducing -maxconnections from N to N-1, because of system limitations`.
Before this patch (only the first warning is correct):
```
$ src/bitcoind -maxconnections=10000000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 10000000 to 1048417, because of system limitations.
$ src/bitcoind -maxconnections=1000000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 1000000 to 999999, because of system limitations.
$ src/bitcoind -maxconnections=100000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 100000 to 99999, because of system limitations.
$ src/bitcoind -maxconnections=10000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 10000 to 9999, because of system limitations.
$ src/bitcoind -maxconnections=1000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 1000 to 999, because of system limitations.
$ src/bitcoind -maxconnections=100 | grep Warning
[no warning]
```
After this patch (no incorrect warnings):
```
$ src/bitcoind -maxconnections=10000000 | grep Warning
2020-09-26T01:23:45Z Warning: Reducing -maxconnections from 10000000 to 1048417, because of system limitations.
$ src/bitcoind -maxconnections=1000000 | grep Warning
[no warning]
$ src/bitcoind -maxconnections=100000 | grep Warning
[no warning]
$ src/bitcoind -maxconnections=10000 | grep Warning
[no warning]
$ src/bitcoind -maxconnections=1000 | grep Warning
[no warning]
$ src/bitcoind -maxconnections=100 | grep Warning
[no warning]
```
ACKs for top commit:
n-thumann:
tACK ea93bbeb26, Ran on other systems running Debian 10.5 (4.19.0-8-amd64) and Debian bullseye/sid (5.3.0-1-amd64) and was able to reproduce the issue exactly as you described above on both of them. After applying your patch the issue is fixed ✌️
laanwj:
Code review ACK ea93bbeb26
theStack:
tACK ea93bbeb26
Tree-SHA512: 9b0939a1a51fdf991d11024a5d20b4f39cab1a80320b799a1d24d0250aa059666bcb1ae6dd79c941c2f2686f07f59fc0f6618b5746aa8ca6011fdd202828a930
Since m_check_ratio is only set once and since the CTxMemPool object is
no longer a global variable, m_check_ratio can be passed into the
constructor of CTxMemPool. Since it is only read from after
initialization, m_check_ratio can also be made a const and hence no
longer needs to be guarded by the cs mutex.
96571b3d4c doc: Update onion service target port numbers in tor.md (Hennadii Stepanov)
bb145c9050 net: Extend -bind config option with optional network type (Hennadii Stepanov)
92bd3c1da4 net, refactor: Move AddLocal call one level up (Hennadii Stepanov)
57f17e57c8 net: Pass onion service target to Tor controller (Hennadii Stepanov)
e3f07851f0 refactor: Rename TorController::target to m_tor_control_center (Hennadii Stepanov)
fdd3ae4d26 net, refactor: Refactor CBaseChainParams::RPCPort function (Hennadii Stepanov)
a5266d4546 net: Add alternative port for onion service (Hennadii Stepanov)
b3273cf403 net: Use network byte order for in_addr.s_addr (Hennadii Stepanov)
Pull request description:
This PR adds ability to label incoming Tor connections as different from normal localhost connections.
Closes#8973.
Closes#16693.
Default onion service target ports are:
- 8334 on mainnnet
- 18334 on testnet
- 38334 on signet
- 18445 on regtest
To set the onion service target socket manually the extended `-bind` config option could be used:
```
$ src/bitcoind -help | grep -A 6 -e '-bind'
-bind=<addr>[:<port>][=onion]
Bind to given address and always listen on it (default: 0.0.0.0). Use
[host]:port notation for IPv6. Append =onion to tag any incoming
connections to that address and port as incoming Tor connections
(default: 127.0.0.1:8334=onion, testnet: 127.0.0.1:18334=onion,
signet: 127.0.0.1:38334=onion, regtest: 127.0.0.1:18445=onion)
```
Since [pr19991.02 update](https://github.com/bitcoin/bitcoin/pull/19991#issuecomment-698882284) this PR is an alternative to #19043.
ACKs for top commit:
Sjors:
re-utACK 96571b3d4c
vasild:
ACK 96571b3d4
laanwj:
Re-ACK 96571b3d4c
Tree-SHA512: cb0eade80f4b3395f405f775e1b89c086a1f09d5a4464df6cb4faf808d9c2245474e1720b2b538f203f6c1996507f69b09f5a6e35ea42633c10e22bd733d4438
f22d6a1142 log: Remove static log message "Initializing chainstate Chainstate [ibd] @ height -1 (null)" (practicalswift)
Pull request description:
Remove static log message `Initializing chainstate Chainstate [ibd] @ height -1 (null)`.
AFAICT `chainstate->ToString()` will always equal `"Chainstate [ibd] @ height -1 (null)"` here which makes the log message neither relevant nor interesting :)
ACKs for top commit:
laanwj:
ACK f22d6a1142
promag:
ACK f22d6a1142, just get rid of it.
hebasto:
ACK f22d6a1142, I agree that the removed log message in its current state is cryptic and useless.
Tree-SHA512: 1a65c0d14c9a433afcdaadef9bfcdd5d63276d5d2caee1bf3c48ac477e54fa28138f64020e6e26ca5e67872954a1e7d93fa24a12accc7c7211bc6e7a6039051d
9b4fa0af40 net: Print error message if -proxy is specified without arguments (instead of continuing without proxy server) (practicalswift)
Pull request description:
Exit with error message if `-proxy` is specified without arguments (instead of continuing without proxy server).
Continuing without a proxy server when the end-user has specified `-proxy` may result in accidental loss of privacy. (The end-user might think he/she is using a proxy when he/she is not.)
Before this patch:
```
$ src/bitcoind -proxy
…
2020-09-23T00:24:33Z InitParameterInteraction: parameter interaction: -proxy set -> setting -listen=0
2020-09-23T00:24:33Z InitParameterInteraction: parameter interaction: -proxy set -> setting -upnp=0
2020-09-23T00:24:33Z InitParameterInteraction: parameter interaction: -proxy set -> setting -discover=0
2020-09-23T00:24:33Z InitParameterInteraction: parameter interaction: -listen=0 -> setting -listenonion=0
…
2020-09-23T00:24:33Z init message: Starting network threads...
```
`bitcoind` is now running *without* a proxy server (`GetProxy(…, …) == false`, `HaveNameProxy() == false`, etc.).
Note that the "-proxy set" log messages above which the end-user might interpret as "good, my traffic is now routed via the proxy".
After this patch:
```
$ src/bitcoind -proxy
Error: No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>.
$ echo $?
1
```
ACKs for top commit:
laanwj:
re-ACK 9b4fa0af40
kristapsk:
ACK 9b4fa0af40, I have tested the code.
hebasto:
re-ACK 9b4fa0af40
Tree-SHA512: 4ba7a011991699a54b5bb87ec68367c681231bf5dcd36f8c89ff9ddc2e8d29df453817b7e362597e652ad6b341a22b7274be0fd78d435e5f0fd8058e5221c4ce
090530cc24 feature: Added ability for users to add a startup command (Ben Carman)
Pull request description:
Thoughts for adding the feature is for users to be able to add things like electrum-personal-server or lnd to run whenever Bitcoin Core is running. Open to feedback about the feature.
ACKs for top commit:
MarcoFalke:
re-ACK 090530cc24
dongcarl:
tACK 090530c
Tree-SHA512: ba514d2fc8b4fb12b781c1a9c89845a25fce0b80ba7c907761cde4abb81edd03fa643682edc895986dc20b273ac3b95769508806db7fbd99ec28623f85c41e67
72a1d5c6f3 validation: Remove review-only comments + assertions (Carl Dong)
3756853b15 docs: Move FindFilesToPrune{,Manual} doxygen comment (Carl Dong)
485899a93c style: Make FindFilesToPrune{,Manual} match style guide (Carl Dong)
3f5b5f3f6d validation: Move FindFilesToPrune{,Manual} to BlockManager (Carl Dong)
f8d4975ab3 validation: Move PruneOneBlockFile to BlockManager (Carl Dong)
74f73c783d validation: Pass in chainman to UnloadBlockIndex (Carl Dong)
4668ded6d6 validation: Move ~CMainCleanup logic to ~BlockManager (Carl Dong)
Pull request description:
This PR paves the way for de-globalizing `g_chainman` entirely by removing the usage of `g_chainman` in the following functions/methods:
- `~CMainCleanup`
- `CChainState::FlushStateToDisk`
- `UnloadBlockIndex`
The remaining direct uses of `g_chainman` are as follows:
1. In initialization codepaths:
- `AppTests`
- `AppInitMain`
- `TestingSetup::TestingSetup`
2. `::ChainstateActive`
3. `LookupBlockIndex`
- Note: `LookupBlockIndex` is used extensively throughout the codebase and require a much larger set of changes, therefore I've left it out of this initial PR
ACKs for top commit:
MarcoFalke:
re-ACK 72a1d5c6f3👚
jnewbery:
utACK 72a1d5c6f3
Tree-SHA512: 944a4fa8405eecf39706ff944375d6824373aaeea849d11473f08181eff26b12f70043a8348a5b08e6e9021b243b481842fbdfbc7c3140ca795fce3688b7f5c3
Using the zmq notifications to avoid excessive mempool polling can be difficult
given the current notifications available. It announces all transactions
being added to mempool or included in blocks, but announces no evictions
and gives no indication if the transaction is in the mempool or a block.
Block notifications for zmq are also substandard, in that it only announces
block tips, while all block transactions are still announced.
This commit adds a unified stream which can be used to closely track mempool:
1) getrawmempool to fill out mempool knowledge
2) if txhash is announced, add or remove from set
based on add/remove flag
3) if blockhash is announced, get block txn list,
remove from those transactions local view of mempool
4) if we drop a sequence number, go to (1)
The mempool sequence number starts at the value 1, and
increments each time a transaction enters the mempool,
or is evicted from the mempool for any reason, including
block inclusion. The mempool sequence number is published
via ZMQ for any transaction-related notification.
These features allow for ZMQ/RPC consumer to track mempool
state in a more exacting way, without unnecesarily polling
getrawmempool. See interface_zmq.py::test_mempool_sync for
example usage.
916d3596c4 help: Generate checkpoint height from chainparams (Luke Dashjr)
Pull request description:
Not sure if this is worth putting in Core, but might as well until checkpoints are removed entirely.
ACKs for top commit:
laanwj:
re-ACK 916d3596c4
Tree-SHA512: d8eb26b570ee730fdd75ca916507134db5f2f68987a911e33544b7f1c9ccfd1c76b9c9db63056971956b6daf16910f17ecfc197481c2f7b0773afdfbf7d381cf
-BEGIN VERIFY SCRIPT-
sed -i 's/PeerLogicValidation/PeerManager/g' $(git grep -l PeerLogicValidation ./src ./test)
sed -i 's/peer_logic/peerman/g' $(git grep -l peer_logic ./src ./test)
-END VERIFY SCRIPT-
PeerLogicValidation was originally net_processing's implementation to
the validation interface. It has since grown to contain much of
net_processing's logic. Therefore rename it to reflect its
responsibilities.
Suggested in
https://github.com/bitcoin/bitcoin/pull/10756#pullrequestreview-53892618.
Keep a references to chainparams, rather than calling the global
Params() function every time it's needed. This is fine, since
globalChainParams does not get updated once it's been set, and it's
available at the point of constructing the PeerLogicValidation object.
24bf17602c gui refactor: Inline SplashScreen::ConnectWallet (Russell Yanofsky)
e4f4350471 refactor: Move wallet methods out of chain.h and node.h (Russell Yanofsky)
b266b3e0bf refactor: Create interfaces earlier during initialization (Russell Yanofsky)
Pull request description:
Add WalletClient interface so node interface is cleaner and don't need wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate global wallet variables like ::vpwallets in #19101, because createWallet(), loadWallet(), getWallets(), etc methods called by the GUI need a way to get a reference to the list of open wallets if it is no longer a global variable.
ACKs for top commit:
promag:
Code review ACK 24bf17602c.
MarcoFalke:
ACK 24bf17602c🐚
Tree-SHA512: a70d3776cd6723093db8912028c50075ec5fa0a48b961cb1a945f922658f5363754f8380dbb8378ed128c8c858913024f8264740905b8121a35c0d63bfaed7cf
Add AppInitInterfaces function so wallet chain and chain client interfaces are
created earlier during initialization. This is needed in the next commit to
allow the gui splash screen to be able to register for wallet events through a
dedicated WalletClient interface instead managing wallets indirectly through
the Node interface. This only works if the wallet client interface is created
before the splash screen needs to use it.
fa9d5902f7 scripted-diff: gArgs -> args (MarcoFalke)
fa33bc2dab init: Capture copy of blocknotify setting for BlockNotifyCallback (MarcoFalke)
fa40017706 init: Pass reference to ArgsManager around instead of relying on global (MarcoFalke)
Pull request description:
The gArgs global has several issues:
* gArgs is used by each process (bitcoind, bitcoin-qt, bitcoin-wallet, bitcoin-cli, bitcoin-tx, ...), but it is hard to determine which arguments are actually used by each process. For example arguments that have never been registered, but are still used, will always return the fallback value.
* Tests may run several sub-tests, which need different settings. So globals will have to be overwritten, but that is fragile on its own: e.g. https://github.com/bitcoin/bitcoin/pull/19704#issuecomment-678259092 or #19511
The goal is to remove gArgs, but as a first step in that direction this pull will change gArgs in init to use a passed-in reference instead.
ACKs for top commit:
ryanofsky:
Code review ACK fa9d5902f7. Looks good. Nice day to remove some globals, and add some lambdas 👍
fanquake:
ACK fa9d5902f7 - I'm not as familiar with the settings & argument handling code, but this make sense, and is a step in the right direction towards a reduction in the usage of globals. Not a huge fan of the clang-formatting in the scripted diff.
jonasschnelli:
Concept ACK fa9d5902f7
Tree-SHA512: ed00db5f826566c7e3b4d0b3d2ee0fc1a49a6e748e04e5c93bdd694ac7da5598749e73937047d5fce86150d764a067d2ca344ba4ae3eb2704cc5c4fa0d20940f
daed542a12 [net_processing] Move ProcessMessage to PeerLogicValidation (John Newbery)
c556770b5e [net_processing] Change PeerLogicValidation to hold a connman reference (John Newbery)
Pull request description:
Rather than ProcessMessage() being a static function in net_processing.cpp, make it a private member function of PeerLogicValidation. This is the start of moving static functions and global variables into PeerLogicValidation to make it better encapsulated.
ACKs for top commit:
jonatack:
ACK daed542a12 code review and debug tested
promag:
Code review ACK daed542a12.
MarcoFalke:
re-ACK daed542a12, only change is removing second commit 🎴
theStack:
Code Review ACK daed542a12
Tree-SHA512: ddebf410d114d9ad5a9e536950018ff333a347c035d74fcc101fb4a3f20a281782c7eac2b7d1bd1c8f6bc7e59f5b5630fb52c2e1b4c32df454fa584673bd021e
f5c003d3ea [test] Add test for NODE_COMPACT_FILTER. (Jim Posen)
132b30d9c8 [net] Signal NODE_COMPACT_FILTERS if we're serving compact filters. (Jim Posen)
b3fbc94d4f Apply cfilters review fixups (John Newbery)
Pull request description:
If -peerblockfilters is configured, signal the `NODE_COMPACT_FILTERS` service bit to indicate that we are able to serve compact block filters, headers and checkpoints.
ACKs for top commit:
MarcoFalke:
re-review and Concept ACK f5c003d3ea
fjahr:
Code review ACK f5c003d3ea
clarkmoody:
Concept ACK f5c003d3ea
ariard:
Concept and Code Review ACK f5c003d
jonatack:
ACK f5c003d3e
Tree-SHA512: 34d1c153530a0e55d09046fe548c9dc37344b5d6d50e00af1b4e1de1e7b49de770fca8471346a17c151de9fe164776296bb3dd5af331977f0c3ef1e6fc906f85
Hold a reference to connman rather than a pointer because:
- PeerLogicValidation can't run without a connman
- The pointer never gets reseated
The alternative is to always assert that the pointer is non-null before
dereferencing.
Change the name from connman to m_connman at the same time to conform
with current style guidelines.
For a couple of years, Tor documentation has made
the term hidden service obsolete, in favor of onion
service.
This PR updates all the references in the code base.
fae8c28dae Pass mempool pointer to GetCoinsCacheSizeState (MarcoFalke)
fac674db20 Pass mempool pointer to UnloadBlockIndex (MarcoFalke)
faec851b6e test: Simplify cs_main locks (MarcoFalke)
Pull request description:
Split out from #19556
Instead of relying on the implicit mempool global, pass a mempool pointer (which can be `0`). This helps with testing, code clarity and unlocks the features described in #19556.
ACKs for top commit:
jnewbery:
code review ACK fae8c28dae
fjahr:
Code review ACK fae8c28dae
darosior:
Tested ACK fae8c28dae
jamesob:
ACK fae8c28dae ([`jamesob/ackr/19604.1.MarcoFalke.pass_mempool_pointer_to`](https://github.com/jamesob/bitcoin/tree/ackr/19604.1.MarcoFalke.pass_mempool_pointer_to))
Tree-SHA512: fa687518c8cda4a095bdbdfe56e01fae2fb16c13d51efbb1312cd6dc007611fc47f53f475602e4a843e3973c9410e6af5a81d6847bd2399f8262ca7205975728
