This improves the error message of the getblock and getblockstats rpc and prevents calls to
ReadRawBlockFromDisk(), which are unnecessary if we know
from the header nStatus field that the block is not available.
61560d5e93 test: makes timeout a forced named argument in tests methods that use it (Sergi Delgado Segura)
Pull request description:
This makes calls to such methods more explicit and less error-prone.
Motivated by https://github.com/bitcoin/bitcoin/pull/29736#discussion_r1540654057
ACKs for top commit:
maflcko:
lgtm ACK 61560d5e93
brunoerg:
ACK 61560d5e93
BrandonOdiwuor:
crACK 61560d5e93
AngusP:
ACK 61560d5e93
stratospher:
tested ACK 61560d5.
Tree-SHA512: 8d6ec3fe1076c868ddbd3050f3c242dbd83cc123f560db3d3b0ed74968e6050dc9ebf4e7c716af9cc1b290c97d736c2fc2ac936b0b69ebdbceed934dae7d55d9
The `next()` call throws an exception if the default parameter is omitted and the iterator is exhausted.
Fix it by providing a default value.
The failure can be tested by commenting out lines 90 and 91 in the test (the `self.connect_nodes(2, 0)``).
Since there is no connection, the node in question retrieves a single element in the 'getchaintips()' call.
This scenario without the fix, aborts the test right away, throwing an StopIteration exception, and with
the fix, the test properly waits until the timeout (wait_until() call).
2cc8ca19f4 [test] Use deterministic addrman in addrman info tests (stratospher)
a897866109 [test] Restart a node with empty addrman (stratospher)
71c19915c0 [test] Use deterministic addrman in addpeeraddress test (stratospher)
7b868e6b67 Revert "test: avoid non-determinism in asmap-addrman test" (stratospher)
69e091f3e1 [init] Create deterministic addrman in tests using -test=addrman (stratospher)
be25ac3092 [init] Remove -addrmantest command line arg (stratospher)
802e6e128b [init] Add new command line arg for use only in functional tests (stratospher)
Pull request description:
An address is placed in a `[bucket,position]` in the addrman table (new table or tried table) using the `addpeeraddress` RPC. This `[bucket,position]` is calculated using `nKey`(and other metrics) for the addrman which is chosen randomly during every run.
Supposing there are 2 addresses to be placed in an addrman table. During every test run, a different `[bucket,position]` would be calculated for each address.These calculated `[bucket,position]` could even be the same for the 2 addresses in some test runs and result in collisions in the addrman. We wouldn't be able to predict when the collisions are going to happen because we can't predict the `nKey` value which is chosen at random. This can cause flaky tests.
Because of these non deterministic collisions, we are limited in what we can do to test addrman functionality. Currently in our tests don't add a second address to prevent these collisions from happening - we only keep 1 address in the new table and 1 address in the tried table. See https://github.com/bitcoin/bitcoin/pull/26988#discussion_r1091145647, https://github.com/bitcoin/bitcoin/pull/23084, [#22831(comment)](https://github.com/bitcoin/bitcoin/pull/22831/files#r708302639).
This PR lets us create a deterministic addrman with fixed `nKey` so that we can know the `[bucket,position]` collisions beforehand, safely add more addresses in an addrman table and write more extensive tests.
ACKs for top commit:
amitiuttarwar:
ACK 2cc8ca19f4
achow101:
ACK 2cc8ca19f4
0xB10C:
ACK 2cc8ca19f4
mzumsande:
Code Review ACK 2cc8ca19f4
Tree-SHA512: 8acd9bdfe7de1eb44d22373bf13533d8ecf602df966fdd5b8b78afcd8cc35a286c95d2712f67a89473a0d68dded7d38f5599f6e4bf95a6589475444545bfb189
Even when the node believes it completed IBD, need to avoid
requesting historical blocks from network-limited peers.
Otherwise, the limited peer will disconnect right away.
-addrmantest is only used in `p2p_node_network_limited.py` test to
test if the node self-advertises a hard-coded local address
(which wouldn't be advertised in the tests because it's unroutable
without the test-only code path) to check pruning-related services
are correct in that addr.
Remove -addrmantest because the self advertisement happens because
of hard coded test path logic, and expected services are nominal
due to how easily the test-only code could diverge from mainnet
logic. It's also being used only in 1 test.
The previous diff touched most files in ./test/, so bump the headers to
avoid having to touch them again for a bump later.
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./test/
-END VERIFY SCRIPT-
-BEGIN VERIFY SCRIPT-
# max-depth=0 excludes test/functional/test_framework/...
FILES=$(git grep -l --max-depth 0 "connect_nodes" test/functional)
# Replace (dis)?connect_nodes(self.nodes[a], b) with self.(dis)?connect_nodes(a, b)
sed -i 's/\b\(dis\)\?connect_nodes(self\.nodes\[\(.*\)\]/self.\1connect_nodes(\2/g' $FILES
# Remove imports in the middle of a line
sed -i 's/\(dis\)\?connect_nodes, //g' $FILES
sed -i 's/, \(dis\)\?connect_nodes//g' $FILES
# Remove imports on a line by themselves
sed -i '/^\s*\(dis\)\?connect_nodes,\?$/d' $FILES
sed -i '/^from test_framework\.util import connect_nodes$/d' $FILES
-END VERIFY SCRIPT-
Co-authored-by: Elliott Jin <elliott.jin@gmail.com>
34e641a564 test: Remove unnecessary disconnect_nodes call in rpc_psbt.py (Danny Lee)
e6e7abd51a test: remove redundant two-way disconnect_nodes calls (Danny Lee)
a9bd1f9adf test: warn if nodes not connected before disconnect_nodes (Danny Lee)
Pull request description:
There's no harm in calling `disconnect_nodes` for nodes that weren't connected (in this case it's a no-op). However, detecting this case and logging a warning can help ensure that tests are behaving as expected.
In addition, since `disconnect_nodes` works bidirectionally, I removed all instances of this pattern:
```
disconnect_nodes(self.nodes[0], 1)
disconnect_nodes(self.nodes[1], 0)
```
ACKs for top commit:
MarcoFalke:
review ACK 34e641a564👔
amitiuttarwar:
ACK 34e641a564. Thanks for this test improvement!
Tree-SHA512: 344855ceb46c012d43c13d7c09f44d32dcb7645706d10ae1e4645d9edca54c6c6c13fee26b79480755cdfcdf39b4b5770b36bb03ce71ba002d5be8a27fe008af
BIP 37 bloom filters have been well-known to be a significant DoS
target for some time. However, in order to provide continuity for
SPV clients relying on it, the NODE_BLOOM service flag was added,
and left as a default, to ensure sufficient nodes exist with such a
flag.
NODE_BLOOM is, at this point, well-established and, as long as
there exist 0.18 nodes with default config (which I'd anticipate
will be true for many years), will be available from some peers. By
that time, the continued slowdown of BIP 37-based filtering will
likely have rendered it useless (though this is already largely the
case). Further, BIP 37 was deliberately never updated to support
witness-based filtering as newer wallets are expected to migrate to
some yet-to-be-network-exposed filters.
This requires a small changes to a few tests, but means that
deterministic addresses will always be imported (unless setup_nodes
behaviour is explicitly overridden).
fa5587fe71 qa: wait_for_verack by default (MarcoFalke)
Pull request description:
This removes the need to do so manually every time a connection is added.
Tree-SHA512: a46c92cb4df41e30778b42b9fd3dcbd8d2d82aa7503d1213cb1c1165034f648d8caee01c292e2d87d05b0f71696996eef5be8a753f35ab49e5f66b0e3bf29f21
