2cc8ca19f4 [test] Use deterministic addrman in addrman info tests (stratospher)
a897866109 [test] Restart a node with empty addrman (stratospher)
71c19915c0 [test] Use deterministic addrman in addpeeraddress test (stratospher)
7b868e6b67 Revert "test: avoid non-determinism in asmap-addrman test" (stratospher)
69e091f3e1 [init] Create deterministic addrman in tests using -test=addrman (stratospher)
be25ac3092 [init] Remove -addrmantest command line arg (stratospher)
802e6e128b [init] Add new command line arg for use only in functional tests (stratospher)
Pull request description:
An address is placed in a `[bucket,position]` in the addrman table (new table or tried table) using the `addpeeraddress` RPC. This `[bucket,position]` is calculated using `nKey`(and other metrics) for the addrman which is chosen randomly during every run.
Supposing there are 2 addresses to be placed in an addrman table. During every test run, a different `[bucket,position]` would be calculated for each address.These calculated `[bucket,position]` could even be the same for the 2 addresses in some test runs and result in collisions in the addrman. We wouldn't be able to predict when the collisions are going to happen because we can't predict the `nKey` value which is chosen at random. This can cause flaky tests.
Because of these non deterministic collisions, we are limited in what we can do to test addrman functionality. Currently in our tests don't add a second address to prevent these collisions from happening - we only keep 1 address in the new table and 1 address in the tried table. See https://github.com/bitcoin/bitcoin/pull/26988#discussion_r1091145647, https://github.com/bitcoin/bitcoin/pull/23084, [#22831(comment)](https://github.com/bitcoin/bitcoin/pull/22831/files#r708302639).
This PR lets us create a deterministic addrman with fixed `nKey` so that we can know the `[bucket,position]` collisions beforehand, safely add more addresses in an addrman table and write more extensive tests.
ACKs for top commit:
amitiuttarwar:
ACK 2cc8ca19f4
achow101:
ACK 2cc8ca19f4
0xB10C:
ACK 2cc8ca19f4
mzumsande:
Code Review ACK 2cc8ca19f4
Tree-SHA512: 8acd9bdfe7de1eb44d22373bf13533d8ecf602df966fdd5b8b78afcd8cc35a286c95d2712f67a89473a0d68dded7d38f5599f6e4bf95a6589475444545bfb189
Adds a new boolean parameter `wait_for_disconnect` to the
`add_outbound_p2p_connection` method. If set, the node under
test is checked to disconnect immediately after receiving the
version message (same logic as for feeler connections).
ecc036c5d6 ci: add --v2transport to an existing CI job (Martin Zumsande)
3a25a575f0 test: ignore --v2transport for older versions instead of asserting (Martin Zumsande)
547aacff08 test: add -v1transport option and use it in test_runner (Martin Zumsande)
Pull request description:
This suggests a strategy to run the functional tests with both v1 and v2 transport in the CI.
**Status Quo:**
There is both the global `--v2transport` option for the `test_runner.py` (not enabled by default), plus the possibility to specify `--v2transport` for particular tests, which is used for a handful of tests. Currently, when running `test_runner.py --v2transport`, these tests are run twice with the same `--v2transport` configuration, as has been noted in https://github.com/bitcoin/bitcoin/pull/29358#discussion_r1485626063, which is wasteful.
**Suggested Change:**
Fix this by adding a `--v1transport` option and using it in `test_runner.py`, so that irrespective of the global `--v2transport` flag, the tests that run twice use v1 in one run and v2 in the other.
Also add `--v2transport` to one CI task (`multiprocess, i686, DEBUG`).
This means, that for each CI task, the majority of functional tests will run once using the global `--v2transport` option if provided, while a few selected tests will always run two times, once with `v1` and once with `v2`.
**Rationale:**
A simpler alternative would have been to remove all test-specific `--v2transport` commands from `test_runner.py` and just enable `--v2transport` option for a few CI tasks. I didn't do that because it would have meant that v2 would never be running in the CI for some platforms, and also be run a lot less locally by users and devs (who would have to actively enable the `--v2transport` option).
ACKs for top commit:
tdb3:
ACK for ecc036c5d6.
achow101:
ACK ecc036c5d6
stratospher:
ACK ecc036c.
vasild:
ACK ecc036c5d6
Tree-SHA512: 375b2293d49991f2fbd8e1bb646c0034004a09cee36063bc32996b721323eb19a43d7b2f36b3f9a3fdca846d74f48d8f1387565c03ef5d34b3481d2a0fe1d328
a951dba3a9 wallet: default wallet migration, modify inconvenient backup filename (furszy)
Pull request description:
Fixes#29584
On default legacy wallets, the backup filename starts with an "-" due to the wallet name being empty. This is inconvenient for systems who treat what follows the initial "-" character as flags.
Note:
As the user can freely set the wallet name to anything, we could also guard the backup filename against other inconvenient characters in the future (we need to be careful here, because the wallet name could also be a path).
ACKs for top commit:
achow101:
ACK a951dba3a9
brunoerg:
utACK a951dba3a9
vasild:
ACK a951dba3a9
Tree-SHA512: 6347bb12cfb50526a4baad96e4f1df9d82b493f79f0a0f7e0a1c8335a86a1e8e147c7b7f95cec6ede6f4507506a7eaf7972bd35131a2d5ed4cbbf38d94f0a9ca
c5b5843d8f test: avoid requesting blocks beyond limited peer threshold (furszy)
2f6a05512f p2p: sync from limited peer, only request blocks below threshold (furszy)
73127722a2 refactor: Make FindNextBlocks friendlier (furszy)
Pull request description:
Even when the node believes it has IBD completed, need to avoid
requesting historical blocks from network-limited peers.
Otherwise, the limited peer will disconnect right away.
The simplest scenario could be a node that gets synced, drops
connections, and stays inactive for a while. Then, once it re-connects
(IBD stays completed), the node tries to fetch all the missing blocks
from any peer, getting disconnected by the limited ones.
Note:
Can verify the behavior by cherry-picking the test commit alone on
master. It will fail there.
ACKs for top commit:
achow101:
ACK c5b5843d8f
vasild:
ACK c5b5843d8f
mzumsande:
Code Review ACK c5b5843d8f
pinheadmz:
ACK c5b5843d8f
Tree-SHA512: 9e550698bc6e63cc587b2b988a87d0ab555a8fa188c91c3f33287f8201d77c28b373331845356ad86f17bb21c15950b6466bc1cafd0ce8139d70364cb71c2ad2
a3badf75f6 tests: Provide more helpful assert_equal errors (Anthony Towns)
Pull request description:
In the functional tests, we often compare dicts with assert_equal, but the output makes it very hard to tell exactly which entry in the dicts don't match when there are a lot of entries and only minor differences. Change the output to make it clearer.
ACKs for top commit:
achow101:
ACK a3badf75f6
vasild:
ACK a3badf75f6
brunoerg:
utACK a3badf75f6
josibake:
ACK a3badf75f6
BrandonOdiwuor:
Code Review ACK a3badf75f6
Tree-SHA512: 1d4b4a3b2e2e28ab09f10b41b04b52b37f64e0d8a54e2306f37de0c3eb3299a7ad4ba225b9efa67057a75e90d008a17385c810a32c9b212d240be280c2dcf2e5
5b358cdd1a i2p: log connection was refused due to arbitrary port (brunoerg)
Pull request description:
For I2P, we do not try to connect if port is != 0. However, we do not have anything that indicates it or any error when trying to connect with port != 0. This PR adds a log for it. Also, it improves the functional test. With this log we can ensure the reason we won't connect is the port, in the current test, we cannot ensure it.
ACKs for top commit:
jonatack:
ACK 5b358cdd1a
epiccurious:
re-ACK 5b358cdd1a.
achow101:
ACK 5b358cdd1a
kristapsk:
re-ACK 5b358cdd1a
vasild:
ACK 5b358cdd1a
Tree-SHA512: 027245afa771c9295fff0bfd17c251dca4a9f4c739e5773922de3c030a65ef05d96291edcbdeeaa50ba3add61f75f28d8c00be503e03fc33d3491d1956fc549f
On default legacy wallets, the backup filename starts with an "-" due
to the wallet name being empty. This is inconvenient for systems who
treat what follows the initial "-" character as flags.
Refactors the helper functions in the test to provide more
fine-grained control over RPC requests and responses than
the usual AuthProxy methods.
No change in test behavior, the same RPC requests are made.
e67ab174c9 test: fix flaky wallet_send functional test (Max Edwards)
3c49e69670 test: fix weight estimates in functional tests (Max Edwards)
Pull request description:
Fixes: https://github.com/bitcoin/bitcoin/issues/25164
The wallet_send functional test has been flaky due to a slightly overestimated weight calculation. This PR makes the weight calculation more accurate, although occasionally, due to how ECDSA signatures can be different lengths it might slightly over estimate. The assertion in the test can handle this slight variation and so should continue passing.
Update:
Because the signature can be shorter that is used in the weight estimation or the final transaction the estimate could be both slightly smaller or slightly larger.
ACKs for top commit:
achow101:
ACK e67ab174c9
S3RK:
Code review ACK e67ab174c9
Tree-SHA512: 3bf73b355309dce860fa1520afb8461e94268e4bcf0e92a8273c279b41b058c44472cf59daafa15a515529b50bd665b5d498bbe4d934f2315dbe810a05bc73f9
Rather than asserting that the exact fees are the same, check the fee rate rounded to nearest interger. This will account for small differences in fees caused by variability in ECDSA signature lengths.
Updates the weight estimate to be more accurate by removing byte buffers and calculating the length of the count of scriptWitnesses rather than just using the count itself.
a8c3454ba1 test: speedup bip324_cipher.py unit test (Sebastian Falbesoner)
Pull request description:
Executing the unit tests for the bip324_cipher.py module currently takes quite long (>60 seconds on my older notebook). Most time here is spent in empty plaintext/ciphertext encryption/decryption loops in `test_fschacha20poly1305aead`:
9eeee7caa3/test/functional/test_framework/crypto/bip324_cipher.py (L193-L194)9eeee7caa3/test/functional/test_framework/crypto/bip324_cipher.py (L198-L199)
Their sole purpose is increasing the FSChaCha20Poly1305 packet counter in order to trigger rekeying, i.e. the actual encryption/decryption is not relevant, as the result is thrown away. This commit speeds up the tests by supporting to pass "None" as plaintext/ciphertext, indicating to the routines that no actual encryption/decryption should be done.
The approach here is a bit hacky, a cleaner alternative would probably be to introduce a special `seek`/`skip_packets` method and not touch the encrypt/decrypt routines, but that seemed overkill to me only for speeding up a unit test. Open for suggestions.
master branch:
```
$ python3 -m unittest ./test/functional/test_framework/crypto/bip324_cipher.py
..
----------------------------------------------------------------------
Ran 2 tests in 64.658s
```
PR branch:
```
$ python3 -m unittest ./test/functional/test_framework/crypto/bip324_cipher.py
..
----------------------------------------------------------------------
Ran 2 tests in 0.822s
```
ACKs for top commit:
delta1:
Concept ACK a8c3454
epiccurious:
Tested ACK a8c3454ba1.
achow101:
ACK a8c3454ba1
marcofleon:
ACK a8c3454ba1. The comments at the top of `bip324_cipher.py` specify that this should only be used for testing, so I think this optimization makes sense in that context.
cbergqvist:
ACK a8c3454!
stratospher:
ACK a8c3454. I think it's worth it because of the significant speedup in the unit test.
Tree-SHA512: 737dd805a850be6e035aa3c6d9e2c5b5b5e89ddc564f84a045c37e0238fef6419912de7c902139b64914abdd647c649fe02a694f1a5e1741d7d4459c041caccc
e073f1dfda test: make sure keypool sizes do not change on `getrawchangeaddress`/`getnewaddress` failures (UdjinM6)
367bb7a80c wallet: Avoid updating `ReserveDestination::nIndex` when `GetReservedDestination` fails (UdjinM6)
Pull request description:
I think the expected behaviour of `getrawchangeaddress` and `getnewaddress` RPCs is that their failure should not affect keypool in any way. At least that's how legacy wallets work, you can confirm this behaviour by running `wallet_keypool.py --legacy-wallet` on master with e073f1dfda applied on top. However running `wallet_keypool.py --descriptors` on the same commit results in the following failure:
```
File "/path/to/bitcoin/test/functional/test_framework/test_framework.py", line 131, in main
self.run_test()
File "/path/to/bitcoin/test/functional/wallet_keypool.py", line 114, in run_test
assert_equal(kp_size_before, kp_size_after)
File "/path/to/bitcoin/test/functional/test_framework/util.py", line 57, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not([18, 24] == [19, 24])
```
This happens because we pass `nIndex` (which is a class member) into `GetReservedDestination` and since it's passed by reference we get an updated value back, so `nIndex` won't be equal `-1` anymore, no matter if the function failed or succeeded. This means that `ReturnDestination` (called by dtor of `ReserveDestination`) will try to return something we did not actually reserve.
The fix is to simply use a temporary variable instead of a class member and only update `nIndex` when `op_address` actually has value, basically do it the same way we do for other class members (`address` and `fInternal`) already.
ACKs for top commit:
achow101:
ACK e073f1dfda
josibake:
ACK e073f1dfda
Tree-SHA512: 1128288a60dd4d8f306ef6f7ac66cdfeae3c9cc35c66ecada2d78fa61ac759f2a757b70fc3976ba8b5081200942b58dfabc184c01ccf911af40ba8c145344651
0487f91a20 test: Fix intermittent failure in rpc_net.py --v2transport (stratospher)
Pull request description:
Fixes#29508.
Make sure that v2 handshake is complete before comparing getpeerinfo outputs so that `transport_protocol_type` isn't stuck at 'detecting'.
This is done by adding a wait_until statement till `transport_protocol_type = v2` so that bitcoind waits until the v2 handshake is complete. (on the python side, this is ensured by default since `wait_for_handshake = True` inside `add_p2p_connection()`)
ACKs for top commit:
Sjors:
ACK 0487f91a20
mzumsande:
Code Review ACK 0487f91a20
achow101:
ACK 0487f91a20
vasild:
ACK 0487f91a20
Tree-SHA512: 44dd646a61cd38da243f527df7321e22d1821c2b090be43673027746098caf450c6671708ed731ba257952df6b5886e64c9c2f9686a82f6ef0f25780b7a87d3d
This option beats the --v2transport option and is meant to be used in
test_runner.py.
It applies these to a few tests that are particulary interesting
in terms of the transport type.
This ensures that these tests arei always run with both v1 and v2, irrespective of
whether the global --v2transport test_runner option is set or not.
In the functional tests, we often compare dicts with assert_equal, but the
output makes it very hard to tell exactly which entry in the dicts don't
match when there are a lot of entries and only minor differences. Change
the output to make it clearer.
Make sure that v2 handshake is complete before comparing getpeerinfo
outputs so that `transport_protocol_type` isn't stuck at 'detecting'.
- on the python side, this is ensured by default
`wait_for_handshake = True` inside `add_p2p_connection()`.
- on the c++ side, add a wait_until statement till
`transport_protocol_type = v2` so that v2 handshake is complete.
Co-Authored-By: Martin Zumsande <mzumsande@gmail.com>
d8087adc7e [test] IsBlockMutated unit tests (dergoegge)
1ed2c98297 Add transaction_identifier::size to allow Span conversion (dergoegge)
1ec6bbeb8d [validation] Cache merkle root and witness commitment checks (dergoegge)
5bf4f5ba32 [test] Add regression test for #27608 (dergoegge)
49257c0304 [net processing] Don't process mutated blocks (dergoegge)
2d8495e080 [validation] Merkle root malleation should be caught by IsBlockMutated (dergoegge)
66abce1d98 [validation] Introduce IsBlockMutated (dergoegge)
e7669e1343 [refactor] Cleanup merkle root checks (dergoegge)
95bddb930a [validation] Isolate merkle root checks (dergoegge)
Pull request description:
This PR proposes to check for mutated blocks early as a defense-in-depth mitigation against attacks leveraging mutated blocks.
We introduce `IsBlockMutated` which catches all known forms of block malleation and use it to do an early mutation check whenever we receive a `block` message.
We have observed attacks that abused mutated blocks in the past, which could have been prevented by simply not processing mutated blocks (e.g. https://github.com/bitcoin/bitcoin/pull/27608 for which a regression test is included in this PR).
ACKs for top commit:
achow101:
ACK d8087adc7e
maflcko:
ACK d8087adc7e🏄
fjahr:
Code review ACK d8087adc7e
sr-gi:
Code review ACK d8087adc7e
Tree-SHA512: 618ff4ea7f168e10f07504d3651290efbb1bb2ab3b838ffff3527c028caf6c52dedad18d04d3dbc627977479710930e200f2dfae18a08f627efe7e64a57e535f
bf5662c678 test: enable v2 for python p2p depending on global --v2transport flag (Martin Zumsande)
6e9e39da43 test: Don't use v2transport when it's too slow. (Martin Zumsande)
87549c8f89 test: enable p2p_invalid_messages.py with v2transport (Martin Zumsande)
5fc9db504b test: enable p2p_sendtxrcncl.py with v2transport (Martin Zumsande)
Pull request description:
#24748 added v2 transport to the python `P2PConnection`, but so far each test that wants to make use of it needs to enable it on an individual basis.
This PR changes it so that if the test suite is run with `--v2transport` option, v2 is used in each test by default, not only for connections between two bitcoind instances as before, but also wherever `P2PConnection` is used. Individual tests can override this global option.
To do that, a few tests need to be adjusted.
In addition, I added a commit to always use v1 in a few select subtests that send a large number of large messages (e.g. large reorgs). These tests don't have a fundamental problem with v2 but become very slow due to the unoptimised python ChaCha20 implementation (~30 minutes on my computer, so probably not suitable to be run in the CI).
As a result, `python3 test_runner.py --v2transport` should succeed and use `v2` everywhere (unless v1 is chosen explicitly).
[Edit]: To make the "test each commit" CI pass, several test fixes were squashed into the last commit, which actually enables v2 p2p for `P2PConnection`. I have an unsquashed version at https://github.com/mzumsande/bitcoin/tree/202401_bip324_alltests_unsquashed, in case that helps with review.
ACKs for top commit:
fjahr:
tACK bf5662c678
vasild:
ACK bf5662c678
stratospher:
reACK bf5662c6.
theStack:
Tested ACK bf5662c678
Tree-SHA512: 4f5a08248ba8a755f7d0f48deb2b79bef03292345cacb7deef01be955481093800e4e56ff218ea56734eef5de1fb3ab0f04657447ea27d393bb536539d7b289d
Adds test in mempool_accept to check if a negative maxfeerate is inputed
into check_mempool_result, asserts "Amount out of range" error message
and -3 error code
8d20602e55 test, assumeutxo: Add test to ensure failure when mempool not empty (Hernan Marino)
Pull request description:
Add a test to ensure that loadtxoutset fails when the node's mempool is not empty, as suggested by maflcko here: https://github.com/bitcoin/bitcoin/pull/27596#discussion_r1344713537
ACKs for top commit:
maflcko:
re-ACK 8d20602e55
BrandonOdiwuor:
ACK 8d20602e55
Tree-SHA512: 97c9668c0f38897934bf0d326515d898d4e682ff219deba9d751b35125b5cf33d51c9df116a74117ecf0394f28995a3d0cae1266b1e5acb4365ff4f309ce3f6c
44d11532f8 test: fix intermittent failure in wallet_reorgrestore.py (Martin Zumsande)
Pull request description:
By adding a missing `sync_blocks` call.
There was a race at `node2` between connecting the block produced by `node0`, and using `-generate` to create new blocks itself. In the failed run, block generation started before connecting the block, resulting in a final block height that was smaller by 1 than expected.
See https://github.com/bitcoin/bitcoin/issues/29392#issuecomment-1939541603 for a more detailed analysis of the failed run.
Can be reproduced by adding a sleep to [this spot](6ff0aa089c/src/validation.cpp (L4217)) in `ChainstateManager::ProcessNewBlock()`:
```
if (util::ThreadGetInternalName() == "msghand") {
std::this_thread::sleep_for(0.2s);
}
```
which fails for me on master and succeeds with the fix.
Fixes#29392
ACKs for top commit:
maflcko:
lgtm ACK 44d11532f8
Tree-SHA512: c08699e5ae348d4c0626022b519449d052f511d3f44601bcd8dac836a130a3f67fca149532e1e3690367ebfdcbcdd32e527170d039209c1f599ce861136ae29f
...by adding a missing sync_blocks call.
There was a race at node2 between connecting the block
produced by node 0, and using -generate to create new blocks
itself. In the failed run, the latter happened first,
resulting in a final block height that was smaller by 1 than
expected.
