a701fcf01f net: Do not skip the I2P network from GetNetworkNames() (Vasil Dimov)
0181e24439 net: recognize I2P from ParseNetwork() so that -onlynet=i2p works (Vasil Dimov)
b905363fa8 net: accept incoming I2P connections from CConnman (Vasil Dimov)
0635233a1e net: make outgoing I2P connections from CConnman (Vasil Dimov)
9559bd1404 net: add I2P to the reachability map (Vasil Dimov)
76c35c60f3 init: introduce I2P connectivity options (Vasil Dimov)
c22daa2ecf net: implement the necessary parts of the I2P SAM protocol (Vasil Dimov)
5bac7e45e1 net: extend Sock with a method to check whether connected (Vasil Dimov)
42c779f503 net: extend Sock with methods for robust send & read until terminator (Vasil Dimov)
ea1845315a net: extend Sock::Wait() to report a timeout (Vasil Dimov)
78fdfbea66 net: dedup MSG_NOSIGNAL and MSG_DONTWAIT definitions (Vasil Dimov)
34bcfab562 net: move the constant maxWait out of InterruptibleRecv() (Vasil Dimov)
cff65c4a27 net: extend CNetAddr::SetSpecial() to support I2P (Vasil Dimov)
f6c267db3b net: avoid unnecessary GetBindAddress() call (Vasil Dimov)
7c224fdac4 net: isolate the protocol-agnostic part of CConnman::AcceptConnection() (Vasil Dimov)
1f75a653dd net: get the bind address earlier in CConnman::AcceptConnection() (Vasil Dimov)
25605895af net: check for invalid socket earlier in CConnman::AcceptConnection() (Vasil Dimov)
545bc5f81d util: fix WriteBinaryFile() claiming success even if error occurred (Vasil Dimov)
8b6e4b3b23 util: fix ReadBinaryFile() returning partial contents (Vasil Dimov)
4cba2fdafa util: extract {Read,Write}BinaryFile() to its own files (Vasil Dimov)
Pull request description:
Add I2P support by using the [I2P SAM](https://geti2p.net/en/docs/api/samv3) protocol. Unlike Tor, for incoming connections we get the I2P address of the peer (and they also receive ours when we are the connection initiator).
Two new options are added:
```
-i2psam=<ip:port>
I2P SAM proxy to reach I2P peers and accept I2P connections (default:
none)
-i2pacceptincoming
If set and -i2psam is also set then incoming I2P connections are
accepted via the SAM proxy. If this is not set but -i2psam is set
then only outgoing connections will be made to the I2P network.
Ignored if -i2psam is not set. Notice that listening for incoming
I2P connections is done through the SAM proxy, not by binding to
a local address and port (default: true)
```
# Overview of the changes
## Make `ReadBinary()` and `WriteBinary()` reusable
We would need to dump the I2P private key to a file and read it back later. Move those two functions out of `torcontrol.cpp`.
```
util: extract {Read,Write}BinaryFile() to its own files
util: fix ReadBinaryFile() returning partial contents
util: fix WriteBinaryFile() claiming success even if error occurred
```
## Split `CConnman::AcceptConnection()`
Most of `CConnman::AcceptConnection()` is agnostic of how the socket was accepted. The other part of it deals with the details of the `accept(2)` system call. Split those so that the protocol-agnostic part can be reused if we accept a socket by other means.
```
net: check for invalid socket earlier in CConnman::AcceptConnection()
net: get the bind address earlier in CConnman::AcceptConnection()
net: isolate the protocol-agnostic part of CConnman::AcceptConnection()
net: avoid unnecessary GetBindAddress() call
```
## Implement the I2P [SAM](https://geti2p.net/en/docs/api/samv3) protocol (not all of it)
Just the parts that would enable us to make outgoing and accept incoming I2P connections.
```
net: extend CNetAddr::SetSpecial() to support I2P
net: move the constant maxWait out of InterruptibleRecv()
net: dedup MSG_NOSIGNAL and MSG_DONTWAIT definitions
net: extend Sock::Wait() to report a timeout
net: extend Sock with methods for robust send & read until terminator
net: extend Sock with a method to check whether connected
net: implement the necessary parts of the I2P SAM protocol
```
## Use I2P SAM to connect to and accept connections from I2P peers
Profit from all of the preceding commits.
```
init: introduce I2P connectivity options
net: add I2P to the reachability map
net: make outgoing I2P connections from CConnman
net: accept incoming I2P connections from CConnman
net: recognize I2P from ParseNetwork() so that -onlynet=i2p works
net: Do not skip the I2P network from GetNetworkNames()
```
ACKs for top commit:
laanwj:
re-ACK a701fcf01f
jonatack:
re-ACK a701fcf01f reviewed diff per `git range-diff ad89812 2a7bb34 a701fcf`, debug built and launched bitcoind with i2pd v2.35 running a dual I2P+Torv3 service with the I2P config settings listed below (did not test `onlynet=i2p`); operation appears nominal (same as it has been these past weeks), and tested the bitcoind help outputs grepping for `-i i2p` and the rpc getpeerinfo and getnetworkinfo helps
Tree-SHA512: de42090c9c0bf23b43b5839f5b4fc4b3a2657bde1e45c796b5f3c7bf83cb8ec6ca4278f8a89e45108ece92f9b573cafea3b42a06bc09076b40a196c909b6610e
e3e0a2432c Add benchmark to write JSON into a string (Martin Ankerl)
Pull request description:
The benchmark `BlockToJsonVerbose` only tests generating (and destroying)
the JSON data structure, but serializing into a string is also a
performance critical aspect of the RPC calls.
Extracts test setup into a `struct TestBlockAndIndex`, and uses it in
both `BlockToJsonVerbose` and `BlockToJsonVerboseWrite`.
Also, use `ankerl::nanobench::doNotOptimizeAway` to make sure the compiler
can't optimize the result of the calls away.
Here are benchmark results on my Intel i7-8700:
| ns/op | op/s | err% | ins/op | cyc/op | IPC | bra/op | miss% | total | benchmark
|--------------------:|--------------------:|--------:|----------------:|----------------:|-------:|---------------:|--------:|----------:|:----------
| 71,807,017.00 | 13.93 | 0.4% | 555,782,961.00 | 220,788,645.00 | 2.517 | 102,279,341.00 | 0.4% | 0.80 | `BlockToJsonVerbose`
| 27,916,835.00 | 35.82 | 0.1% | 235,084,034.00 | 89,033,525.00 | 2.640 | 42,911,139.00 | 0.3% | 0.32 | `BlockToJsonVerboseWrite`
ACKs for top commit:
laanwj:
Code review ACK e3e0a2432c
Tree-SHA512: bc4d6d1588d47d4bd7af8e7908e44b8561bc391a2d73eccd7c0aa37fc40e8a9ce1fa1f3c29b416eef24a73c6bce3036839c0bbfe1b8dbd6d1bba3718b7ca5383
So that help texts include "i2p" in:
* `./bitcoind -help` (in `-onlynet` description)
* `getpeerinfo` RPC
* `getnetworkinfo` RPC
Co-authored-by: Jon Atack <jon@atack.com>
Introduce two new options to reach the I2P network:
* `-i2psam=<ip:port>` point to the I2P SAM proxy. If this is set then
the I2P network is considered reachable and we can make outgoing
connections to I2P peers via that proxy. We listen for and accept
incoming connections from I2P peers if the below is set in addition to
`-i2psam=<ip:port>`
* `-i2pacceptincoming` if this is set together with `-i2psam=<ip:port>`
then we accept incoming I2P connections via the I2P SAM proxy.
Implement the following commands from the I2P SAM protocol:
* HELLO: needed for all of the remaining ones
* DEST GENERATE: to generate our private key and destination
* NAMING LOOKUP: to convert .i2p addresses to destinations
* SESSION CREATE: needed for STREAM CONNECT and STREAM ACCEPT
* STREAM CONNECT: to make outgoing connections
* STREAM ACCEPT: to accept incoming connections
Introduce two high level, convenience methods in the `Sock` class:
* `SendComplete()`: keep trying to send the specified data until either
successfully sent all of it, timeout or interrupted.
* `RecvUntilTerminator()`: read until a terminator is encountered (never
after it), timeout or interrupted.
These will be convenient in the I2P SAM implementation.
`SendComplete()` can also be used in the SOCKS5 implementation instead
of calling `send()` directly.
Previously `Sock::Wait()` would not have signaled to the caller whether
a timeout or one of the requested events occurred since that was not
needed by any of the callers.
Such functionality will be needed in the I2P implementation, thus extend
the `Sock::Wait()` method.
Recognize also I2P addresses in the form `base32hashofpublickey.b32.i2p`
from `CNetAddr::SetSpecial()`.
This makes `Lookup()` support them, which in turn makes it possible to
manually connect to an I2P node by using
`-proxy=i2p_socks5_proxy:port -addnode=i2p_address.b32.i2p:port`
Co-authored-by: Lucas Ontivero <lucasontivero@gmail.com>
Our local (bind) address is already saved in `CNode::addrBind` and there
is no need to re-retrieve it again with `GetBindAddress()`.
Also, for I2P connections `CNode::addrBind` would contain our I2P
address, but `GetBindAddress()` would return something like
`127.0.0.1:RANDOM_PORT`.
Isolate the second half of `CConnman::AcceptConnection()` into a new
separate method, which could be reused if we accept incoming connections
by other means than `accept()` (first half of
`CConnman::AcceptConnection()`).
Call `GetBindAddress()` earlier in `CConnman::AcceptConnection()`. That
is specific to the TCP protocol and makes the code below it reusable for
other protocols, if the caller provides `addr_bind`, retrieved by other
means.
This check is related to an `accept()` failure. So do the check earlier,
closer to the `accept()` call.
This will allow to isolate the `accept()`-specific code at the beginning
of `CConnman::AcceptConnection()` and reuse the code that follows it.
`fclose()` is flushing any buffered data to disk, so if it fails then
that could mean that the data was not completely written to disk.
Thus, check if `fclose()` succeeds and only then claim success from
`WriteBinaryFile()`.
If an error occurs and `fread()` returns `0` (nothing was read) then the
code before this patch would have returned "success" with a partially
read contents of the file.
Extract `ReadBinaryFile()` and `WriteBinaryFile()` from `torcontrol.cpp`
to its own `readwritefile.{h,cpp}` files, so that it can be reused from
other modules.
faa06ecc9c build: Bump minimum Qt version to 5.9.5 (Hennadii Stepanov)
Pull request description:
Close#20104.
ACKs for top commit:
laanwj:
Code review ACK faa06ecc9c
jarolrod:
ACK faa06ecc9c
fanquake:
ACK faa06ecc9c - this should be ok to do now.
Tree-SHA512: 7295472b5fd37ffb30f044e88c39d375a5a5187d3f2d44d4e73d0eb0c7fd923cf9949c2ddab6cddd8c5da7e375fff38112b6ea9779da4fecce6f024d05ba9c08
70d3c5d0b9 gui: add "Last Block" (CNodeStats::nLastBlockTime) to peer details (Jon Atack)
a21be7c401 gui: add "Last Tx" (CNodeStats::nLastTXTime) to peer details (Jon Atack)
4dc2fd6c37 qt: add RPCConsole::TimeDurationField helper, call systime only once (Jon Atack)
Pull request description:
- add `RPCConsole::TimeDurationField` helper to replace repeated code and call system time only once in `RPCConsole::updateDetailWidget`
- add "Last Tx" (`CNodeStats::nLastTXTime`) field to peer details
- add "Last Block" (`CNodeStats::nLastBlockTime`) field to peer details
ACKs for top commit:
hebasto:
re-ACK 70d3c5d0b9
Tree-SHA512: 2611b71fd358ba9ffb6a6206275c08ecb5e683b6f87d022faaaba9802a15030430113afdb434814a9ae2681d04429aa733164bc110b64337ceaae12a0420f4f1
fae216a73d scripted-diff: Rename MakeFuzzingContext to MakeNoLogFileContext (MarcoFalke)
fa4fbec03e scripted-diff: Rename PROVIDE_MAIN_FUNCTION -> PROVIDE_FUZZ_MAIN_FUNCTION (MarcoFalke)
Pull request description:
Split out two renames from #21003:
* `PROVIDE_FUZZ_MAIN_FUNCTION`. *Reason*: This in only used by fuzzing, so the name should indicate that.
* `MakeNoLogFileContext`. *Reason*: Better reflects what the helper does. Also, prepares it to be used in non-fuzz tests in the future.
ACKs for top commit:
practicalswift:
cr ACK fae216a73d: scripted-diff looks correct
Tree-SHA512: e5d347746f5da72b0c86fd4f07ac2e4b3016e88e8c97a830c73bd79d0af6d0245fe7712487fc20344d6cc25958941716c1678124a123930407e3a437265b71df
5440c07457 qt: Rename "Edit label" to "Edit address label" (Wladimir J. van der Laan)
22664d6287 Revert "qt: Remove Transactionview Edit Label Action" (Wladimir J. van der Laan)
Pull request description:
This reverts PR #211.
I disagree with this change, I use the functionality a lot, it was the primary way I used to organize and edit transactions labels and am sad to see this go.
> you can edit a sending address in the send tab Address Book
Using the address book should not be encouraged at all! A while ago it was even proposed to remove it. There's rarely need to scroll through all historical addresses used and unused. The transaction list does just fine for this.
> While all other actions apply directly to the selected transaction, the Edit Label action applies to the selected transaction's address.
**In practice** when bitcoin is used in the commonly advised way, generate a new address for each transaction, those are equivalent though.
I doubt I (and **luke-jr**) will be the only users that will stumblle on this. Further discussion here: https://github.com/bitcoin-core/gui/pull/211#issuecomment-784755998
ACKs for top commit:
hebasto:
ACK 5440c07457, verified that 22664d6287 is a clean revert of 8f9644890a.
Tree-SHA512: 3a86a730279bc454d0bd25d874dbfb6b1c0492480e66c3164e7c60d8658d622d4522de11bf8564876dc3ee056b53db71ecbe8a37281bf25d41a27e6e0d72ad8f
bb3da8fe41 qt: Disable requests context menu actions when appropriate (Jarol Rodriguez)
Pull request description:
The recent requests table will allow you to copy data points even if they do not exist. This PR implements checks to disable the `copy label`, `copy message`, and `copy amount` context menu actions if the respective fields are empty. This brings the recent requests table context menu behavior closer to the behavior seen in the transaction view.
On a payment request entry which does not have a value for label, message, or amount:
| Master | PR |
| ----------- | ----------- |
|<img width="169" alt="Screen Shot 2021-02-19 at 1 22 28 AM" src="https://user-images.githubusercontent.com/23396902/108466086-167adc00-7251-11eb-8bd6-13984042bdb3.png">| <img width="169" alt="Screen Shot 2021-02-19 at 1 21 49 AM" src="https://user-images.githubusercontent.com/23396902/108466185-3e6a3f80-7251-11eb-9dd8-492ed07fd638.png">|
`copy URI` never needs to be disabled as an entry in the recent requests table must have a URI even if it doesn't have a label, message, or amount. #213 will add a `copy address` context menu action. This also does not need a check as an entry must be associated with an address.
Below are some more examples of how this PR will behave:
**Has Label, Message, and Amount**
<img width="780" alt="Screen Shot 2021-02-19 at 12 05 38 AM" src="https://user-images.githubusercontent.com/23396902/108466507-c18b9580-7251-11eb-8875-f3aeb9c4c8e9.png">
**Has Label and Amount, but no Message**
<img width="780" alt="Screen Shot 2021-02-19 at 12 05 58 AM" src="https://user-images.githubusercontent.com/23396902/108466421-9b65f580-7251-11eb-97eb-a3bfaa21fa7d.png">
ACKs for top commit:
hebasto:
re-ACK bb3da8fe41
Tree-SHA512: d98f1a6e05ebf6d9d056bc5754aca78ca7ecda93f497dba88187b947ca4a261eb7dc5e8c872956315acaa0008cc39320fb5806e17117e0c873090ad917ca4a3d
ca5bd1c8e5 qt: Prevent the main window popup menu (Hennadii Stepanov)
Pull request description:
https://github.com/bitcoin/bitcoin/issues/11168 is not fixed by https://github.com/bitcoin/bitcoin/pull/11169 completely, as users are allowed to right click on the menu bar:
This PR moves the context menu prohibition from `QToolBar` instance to its parent `BitcoinGUI` instance, which is derived from `QMainWindow`.
ACKs for top commit:
jarolrod:
ACK ca5bd1c8e5, tested on Ubuntu 20.04 Qt 5.12. Confirming that I can replicate the behavior described on `master` and this `PR` fixes it.
leonardojobim:
tACK ca5bd1c8e5
Tree-SHA512: a654ecf7ee35bb271df039be77077c1e1f9514e332587ba8622cea18da6a5b3ae8a7eb421e404ec5993c31a2f4d028e0e456fcc01facdbf61a2bc3b1e8423982
fd6580e405 [refactor] txmempool: split epoch logic into class (Anthony Towns)
Pull request description:
Splits the epoch logic introduced in #17925 into a separate class.
Uses clang's thread safety annotations and encapsulates the data more strongly to reduce chances of bugs from API misuse.
ACKs for top commit:
jonatack:
ACK fd6580e405 using clang thread safety annotations looks like a very good idea, and the encapsulation this change adds should improve robustness (and possible unit test-ability) of the code. Verified that changing some of the locking duly provoked build-time warnings with Clang 9 on Debian and that small changes in the new `Epoch` class were covered by failing functional test assertions in `mempool_updatefromblock.py`, `mempool_resurrect.py`, and `mempool_reorg.py`
hebasto:
re-ACK fd6580e405, since my [previous](https://github.com/bitcoin/bitcoin/pull/18017#pullrequestreview-569619362) review:
Tree-SHA512: 7004623faa02b56639aa05ab7a078320a6d8d54ec62d8022876221e33f350f47df51ddff056c0de5be798f8eb39b5c03c2d3f035698555d70abc218e950f2f8c
9bac71350d build: make HAVE_O_CLOEXEC available outside LevelDB (bugfix) (Sebastian Falbesoner)
584fd91d2d init: only use pipe2 if availabile, check in configure (Sebastian Falbesoner)
Pull request description:
The result of the O_CLOEXEC availability check is currently only set in the Makefile and passed to LevelDB (see `LEVELDB_CPPFLAGS_INT` in `src/Makefile.leveldb.include`), but not defined to be used in our codebase. This means that code within the preprocessor conditional `#if HAVE_O_CLOEXEC` was actually never compiled. On the master branch this is currently used for pipe creation in `src/shutdown.cpp`, PR #21007 moves this part to a new module (I found the issue while testing that PR).
The fix is similar to the one in #19803, which solved the same problem for HAVE_FDATASYNC.
In the course of working on the PR it turned out that pipe2 is not available an all platforms, hence a configure check and a corresponding define HAVE_PIPE2 is introduced and used.
The PR can be tested by anyone with a system that has pipe2 and O_CLOEXEC available by putting gibberish into the HAVE_O_CLOEXEC block: on master, everything should compile fine, on PR, the compiler should abort with an error. At least that's my naive way of testing preprocessor logic, happy to hear more sophisticated ways :-)
ACKs for top commit:
laanwj:
Code review ACK 9bac71350d
Tree-SHA512: aec89faf6ba52b6f014c610ebef7b725d9e967207d58b42a4a71afc9f1268fcb673ecc85b33a2a3debba8105a304dd7edaba4208c5373fcef2ab83e48a170051
ba7e17e073 rpc, test: document {previous,next}blockhash as optional (Sebastian Falbesoner)
Pull request description:
This PR updates the result help of the following RPCs w.r.t. the `previousblockhash` and `nextblockhash` fields:
- getblockheader
- getblock
Also adds trivial tests on genesis block (should not contain "previousblockhash") and best block (should not contain "nextblockhash").
Top commit has no ACKs.
Tree-SHA512: ef42c5c773fc436e1b4a67be14e2532e800e1e30e45e54a57431c6abb714d2c069c70d40ea4012d549293b823a1973b3f569484b3273679683b28ed40abf46bb
f75e0c1edd doc: add external-signer.md (Sjors Provoost)
d4b0107d68 rpc: send: support external signer (Sjors Provoost)
245b4457cf rpc: signerdisplayaddress (Sjors Provoost)
7ebc7c0215 wallet: ExternalSigner: add GetDescriptors method (Sjors Provoost)
fc5da520f5 wallet: add GetExternalSigner() (Sjors Provoost)
259f52cc33 test: external_signer wallet flag is immutable (Sjors Provoost)
2655197e1c rpc: add external_signer option to createwallet (Sjors Provoost)
2700f09c41 rpc: signer: add enumeratesigners to list external signers (Sjors Provoost)
07b7c940a7 rpc: add external signer RPC files (Sjors Provoost)
8ce7767071 wallet: add ExternalSignerScriptPubKeyMan (Sjors Provoost)
157ea7c614 wallet: add external_signer flag (Sjors Provoost)
f3e6ce78fb test: add external signer test (Sjors Provoost)
8cf543f96d wallet: add -signer argument for external signer command (Sjors Provoost)
f7eb7ecc67 test: framework: add skip_if_no_external_signer (Sjors Provoost)
87a97941f6 configure: add --enable-external-signer (Sjors Provoost)
Pull request description:
Big picture overview in [this gist](https://gist.github.com/Sjors/29d06728c685e6182828c1ce9b74483d).
This PR lets `bitcoind` call an arbitrary command `-signer=<cmd>`, e.g. a hardware wallet driver, where it can fetch public keys, ask to display an address, and sign a transaction (using PSBT under the hood).
It's design to work with https://github.com/bitcoin-core/HWI, which supports multiple hardware wallets. Any command with the same arguments and return values will work. It simplifies the manual procedure described [here](https://github.com/bitcoin-core/HWI/blob/master/docs/bitcoin-core-usage.md).
Usage is documented in [doc/external-signer.md](
https://github.com/Sjors/bitcoin/blob/2019/08/hww-box2/doc/external-signer.md), which also describes what protocol a different signer binary should conform to.
Use `--enable-external-signer` to opt in, requires Boost::Process:
```
Options used to compile and link:
with wallet = yes
with gui / qt = no
external signer = yes
```
It adds the following RPC methods:
* `enumeratesigners`: asks <cmd> for a list of signers (e.g. devices) and their master key fingerprint
* `signerdisplayaddress <address>`: asks <cmd> to display an address
It enhances the following RPC methods:
* `createwallet`: takes an additional `external_signer` argument and fetches keys from device
* `send`: automatically sends transaction to device and waits
Usage TL&DR:
* clone HWI repo somewhere and launch `bitcoind -signer=../HWI/hwi.py`
* check if you can see your hardware device: `bitcoin-cli enumeratesigners`
* create wallet and auto import keys `bitcoin-cli createwallet "hww" true true "" true true true`
* display address on device: `bitcoin-cli signerdisplayaddress ...`
* to spend, use `send` RPC and approve transaction on device
Prerequisites:
- [x] #21127 load wallet flags before everything else
- [x] #21182 remove mostly pointless BOOST_PROCESS macro
Potentially useful followups:
- GUI support: bitcoin-core/gui#4
- bumpfee support
- (automatically) verify (a subset of) keys on the device after import, through message signing
ACKs for top commit:
laanwj:
re-ACK f75e0c1edd
Tree-SHA512: 7db8afd54762295c1424c3f01d8c587ec256a72f34bd5256e04b21832dabd5dc212be8ab975ae3b67de75259fd569a561491945750492f417111dc7b6641e77f
The recent requests table will allow you to copy data points even if they do not exist.
This PR implements checks to disable the 'copy label', 'copy message', and 'copy amount' context menu action if the respective fields are empty.
faf48f20f1 log: Clarify log message when file does not exist (MarcoFalke)
Pull request description:
Shorter and broader alternative to #21181
Rendered diff:
```diff
@@ -1,4 +1,4 @@
-Bitcoin Core version v21.99.0-db656db2ed5a (release build)
+Bitcoin Core version v21.99.0-faf48f20f196 (release build)
Qt 5.15.2 (dynamic), plugin=wayland (dynamic)
No static plugins.
Style: adwaita / Adwaita::Style
@@ -24,8 +24,8 @@ scheduler thread start
Using wallet directory /tmp/test_001/regtest/wallets
init message: Verifying wallet(s)...
init message: Loading banlist...
-ERROR: DeserializeFileDB: Failed to open file /tmp/test_001/regtest/banlist.dat
-Invalid or missing banlist.dat; recreating
+Missing or invalid file /tmp/test_001/regtest/banlist.dat
+Recreating banlist.dat
SetNetworkActive: true
Failed to read fee estimates from /tmp/test_001/regtest/fee_estimates.dat. Continue anyway.
Using /16 prefix for IP bucketing
@@ -63,9 +63,9 @@ Bound to [::]:18444
Bound to 0.0.0.0:18444
Bound to 127.0.0.1:18445
init message: Loading P2P addresses...
-ERROR: DeserializeFileDB: Failed to open file /tmp/test_001/regtest/peers.dat
-Invalid or missing peers.dat; recreating
-ERROR: DeserializeFileDB: Failed to open file /tmp/test_001/regtest/anchors.dat
+Missing or invalid file /tmp/test_001/regtest/peers.dat
+Recreating peers.dat
+Missing or invalid file /tmp/test_001/regtest/anchors.dat
0 block-relay-only anchors will be tried for connections.
init message: Starting network threads...
net thread start
ACKs for top commit:
jnewbery:
utACK faf48f20f1
amitiuttarwar:
utACK faf48f20f1, 👍 for consistency. also checked where we create / load other `.dat` files, looks good to me.
practicalswift:
cr ACK faf48f20f1
Tree-SHA512: 697a728ef2b9f203363ac00b03eaf23ddf80bee043ecd3719265a0d884e8cfe88cd39afe946c86ab849edd1c836f05ec51125f052bdc14fe184b84447567756f
