47c48b5f35 test: only use verbose for getrawmempool when necessary in functional tests (Michael Dietz)
77349713b1 test: use getmempoolentry instead of getrawmempool in functional tests when appropriate (Michael Dietz)
86dbd54ae8 test: improve mempool_updatefrom efficiency by using getmempoolentry for specific txns (Michael Dietz)
Pull request description:
I don't think this changes the intention of the test. But it does shave ~30 seconds off the time it takes to run. From what I've seen our CI `macOS 11 native [gui] [no depends]` runs `mempool_updatefrom.py` in ~135 seconds. After this PR it should run in ~105 seconds
I noticed this improvement should probably be made when testing performance/runtimes of https://github.com/bitcoin/bitcoin/pull/22698. But I wanted to separate this out from that PR so the affects of each is decoupled
Edit: The major change in this PR is improving mempool_updatefrom.py's runtime as this is a very long running test. Then made the same efficiency improvements across all the functional tests as it made since to do that here
ACKs for top commit:
theStack:
Tested ACK 47c48b5f35
Tree-SHA512: 40f553715f3d4649dc18c2738554eafaca9ea800c4b028c099217896cc1c466ff457ae814d59cf8564c782a8964d8fac3eda60c1b6ffb08bbee1439b2d34434b
e2ff385e13 test: check for invalid `-prune` parameters (Sebastian Falbesoner)
Pull request description:
This small PR adds missing test coverage for invalid `-prune` parameter values / combinations:
77e23ca945/src/init.cpp (L926-L928)77e23ca945/src/init.cpp (L935-L937)77e23ca945/src/init.cpp (L844-L849)
Not sure if the tests fit into `feature_config_args.py` or should rather be moved into `feature_pruning.py`; the latter though seems to be run less often due to being very memory-hungry.
ACKs for top commit:
laanwj:
Code review ACK e2ff385e13
Tree-SHA512: bb0db98090058ecac9f8a01301634e9dba9a65fd56b6a0b770f88da28c4f01e240e22b1225f0d231e28bdd4b5b51bff0e6853cccc46ed0190e91b84f7954a9db
92885c4f69 test: Test for ApproximateBestSubset edge case with too little fees (Andrew Chow)
d9262324e8 wallet: Assert that enough was selected to cover the fees (Andrew Chow)
2de222c401 wallet: Use GetSelectionAmount for target value calculations (Andrew Chow)
Pull request description:
The `m_value` used for the target calculation in `ApproximateBestSubset` is incorrect, it should be `GetSelectionAmount`. This causes a bug that is only apparent when the minimum relay fee is set to be very high.
A test case is added for this, in addition to an assert in `CreateTransactionInternal` that would have also caught this issue if someone were able to hit the edge case.
Fixes#22670
ACKs for top commit:
instagibbs:
utACK 92885c4f69
Tree-SHA512: bd61fa61ffb60873e097737eebea3afe8a42296ba429de9038b3a4706763b34de9409de6cdbab21ff7f51f4787b503f840873182d9c4a1d6e12a54b017953547
5fe8100ff3 Change the wallet_backup.py test to use the restorewallet RPC command instead of restoring wallets manually. (lsilva01)
ae23faba6f Add a new RPC command: restorewallet (lsilva01)
Pull request description:
As far as I know, there is no command to restore the wallet from a backup file.
The only way to do this is to replace the `wallet.dat` of a newly created wallet with the backup file, which is hardly an intuitive way.
This PR implements the `restorewallet` RPC command which restores the wallet from the backup file.
To test:
First create a backup file:
`$ bitcoin-cli -rpcwallet="wallet-01" backupwallet /home/Backups/wallet-01.bak`
Then restore it in another wallet:
`$ bitcoin-cli restorewallet "restored-wallet-01" /home/Backups/wallet-01.bak`
ACKs for top commit:
achow101:
re-ACK 5fe8100ff3
prayank23:
tACK 5fe8100ff3
meshcollider:
utACK 5fe8100ff3
Tree-SHA512: 9639df4d8ad32f255f5b868320dc69878bd9aceb3b471b49dfad500b67681e2d354292b5410982fbf18e25a44ed0c06fd4a0dd010e82807c2e00ff32e84047a1
d930c7f5b0 p2p, rpc, test: address rate-limiting follow-ups (Jon Atack)
Pull request description:
Incorporates review feedback in #22387.
Edit, could be considered separately: should a release note (or two) be added for 22.0? e.g. the new getpeerinfo fields in `Updated RPCs` and the rate-limiting itself in `P2P and network changes`.
ACKs for top commit:
MarcoFalke:
review ACK d930c7f5b0
theStack:
re-ACK d930c7f5b0🌮
Zero-1729:
crACK d930c7f
Tree-SHA512: b2101cad87f59c238603f38bd8e8df7a4d48929794e4de9e0e0ff2afa935a68475c2d369aa669d124a0bec2f50280fb47e8b980bde6ad812db08cf67b71c066a
ApproximateBestSubset had an edge case (due to not using
GetSelectionAmount) where it was possible for it to return success but
fail to select enough to cover transaction fees. A test is added that
could trigger this failure prior to the fix being implemented.
fafe896a0b test: Set regtest.BIP66Height = 102 to speed up tests (MarcoFalke)
Pull request description:
No need to waste time by forcing creation of more than 1000 blocks to get the benefits of being able to test BIP 66. Also, reducing the height makes it more likely that (third-party) tests are conforming to BIP 66, which is enforced on mainnet for all new blocks.
ACKs for top commit:
GeneFerneau:
Concept + code review ACK [fafe896](fafe896a0b)
0xB10C:
crACK fafe896a0b
laanwj:
ACK fafe896a0b
Zero-1729:
tACK fafe896
kristapsk:
ACK fafe896a0b. Full functional test suite showed few second speed incrase on my laptop (although I didn't do proper benchmarking with multiple runs, just single `time ./test/functional/test_runner.py` on current master vs this PR).
theStack:
Tested ACK fafe896a0b
hg333:
tACK fafe896a0b
Tree-SHA512: 4bbee3c8587d612e74a59fde49b6439c1296f2fc27d3a7cf59a35e920f729fdd581c930290bd04def618f81412236676ddb99b4ceb4d80dfb9fd610b128a04b1
accf3d5868 [test] mempool package ancestor/descendant limits (glozow)
2b6b26e57c [test] parameterizable fee for make_chain and create_child_with_parents (glozow)
313c09f7b7 [test] helper function to increase transaction weight (glozow)
f8253d69d6 extract/rename helper functions from rpc_packages.py (glozow)
3cd663a5d3 [policy] ancestor/descendant limits for packages (glozow)
c6e016aa13 [mempool] check ancestor/descendant limits for packages (glozow)
f551841d3e [refactor] pass size/count instead of entry to CalculateAncestorsAndCheckLimits (glozow)
97dd1c729d MOVEONLY: add helper function for calculating ancestors and checking limits (glozow)
f95bbf58aa misc package validation doc improvements (glozow)
Pull request description:
This PR implements a function to calculate mempool ancestors for a package and enforces ancestor/descendant limits on them as a whole. It reuses a portion of `CalculateMemPoolAncestors()`; there's also a small refactor to move the reused code into a generic helper function. Instead of calculating ancestors and descendants on every single transaction in the package and their ancestors, we use a "worst case" heuristic, treating every transaction in the package as each other's ancestor and descendant. This may overestimate everyone's counts, but is still pretty accurate in the our main package use cases, in which at least one of the transactions in the package is directly related to all the others (e.g. 1 parent + 1 child, multiple parents with 1 child, or chains).
Note on Terminology: While "package" is often used to describe groups of related transactions _within_ the mempool, here, I only use package to mean the group of not-in-mempool transactions we are currently validating.
#### Motivation
It would be a potential DoS vector to allow submission of packages to mempool without a proper guard for mempool ancestors/descendants. In general, the purpose of mempool ancestor/descendant limits is to limit the computational complexity of dealing with families during removals and additions. We want to be able to validate multiple transactions on top of the mempool, but also avoid these scenarios:
- We underestimate the ancestors/descendants during package validation and end up with extremely complex families in our mempool (potentially a DoS vector).
- We expend an unreasonable amount of resources calculating everyone's ancestors and descendants during package validation.
ACKs for top commit:
JeremyRubin:
utACK accf3d5
ariard:
ACK accf3d5.
Tree-SHA512: 0d18ce4b77398fe872e0b7c2cc66d3aac2135e561b64029584339e1f4de2a6a16ebab3dd5784f376e119cbafc4d50168b28d3bd95d0b3d01158714ade2e3624d
bb822a7af8 wallet, rpc: add listdescriptors private option (S3RK)
Pull request description:
Rationale: make it possible to backup your wallet with `listdescriptors` command
* The default behaviour is still to show public version
* For private version only the root xprv is returned
Example use-case:
```
> bitcoin-cli -regtest -named createwallet wallet_name=old descriptors=true
> bitcoin-cli -regtest -rpcwallet=old listdescriptors true | jq '.descriptors' > descriptors.txt
> bitcoin-cli -regtest -named createwallet wallet_name=new descriptors=true blank=true
> bitcoin-cli -regtest -rpcwallet=new importdescriptors "$(cat descriptors.txt)"
```
In case of watch-only wallet without private keys there will be following output:
```
error code: -4
error message:
Can't get descriptor string.
```
ACKs for top commit:
achow101:
re-ACK bb822a7af8
Rspigler:
tACK bb822a7af8
jonatack:
ACK bb822a7af8 per `git diff 2854ddc bb822a7`
prayank23:
tACK bb822a7af8
meshcollider:
Code review ACK bb822a7af8
Tree-SHA512: f6dddc72a74e5667071ccd77f8dce578382e8e29e7ed6a0834ac2e114a6d3918b59c2f194f4079b3259e13d9ba3b4f405619940c3ecb7a1a0344615aed47c43d
5a1bef60a0 test: refactor: remove binascii from test_framework (Zero-1729)
Pull request description:
This PR continues the work started in PR #22593, regarding using the `bytes` built-in module. In this PR specifically, instances of `binascii`'s methods `hexlify`, `unhexlify`, and `a2b_hex` have been replaced with the build-in `bytes` module's `hex` and `fromhex` methods where appropriate to make bytes <-> hex-string conversions consistent across the functional test files and test_framework.
Additionally, certain changes made are based on the following assumption:
```
bytes.hex(data) == binascii.hexlify(data).decode()
bytes.hex(data).encode() == binascii.hexlify(data)
```
Ran the functional tests to ensure behaviour is still consistent and changes didn't break existing tests.
closes#22605
ACKs for top commit:
theStack:
Code-review ACK 5a1bef60a0🔢
Tree-SHA512: 8f28076cf0580a0d02a156f3e1e94c9badd3d41c3fbdfb2b87cd8a761dde2c94faa5f4c448d6747b1ccc9111c3ef1a1d7b42a11c806b241fa0410b7529e2445f
222290f543 test: Set BIP34Height = 2 for regtest (MarcoFalke)
fac90c55be test: Create all blocks with version 4 or higher (MarcoFalke)
Pull request description:
BIP34 is active on the current tip of mainnet, so all miners must obey it. It would be nice if it also was active in fresh regtest instances from the earliest time possible.
I changed the BIP34 height to `2`, so that the block at height=1 may be used to mine a duplicate coinbase. (Needed to test mainnet behaviour)
This pull is done in two commits:
* test: Create all blocks with version 4 or higher:
Now that BIP34 is activated earlier, we need to create blocks with a higher version number. Just bump it to 4 instead of 2 to avoid having to bump it again later.
* test: Set BIP34Height = 2 for regtest:
This fixes the BIP34 implementation in the tests (to match the one of the Core codebase) and updates the tests where needed
ACKs for top commit:
ajtowns:
ACK 222290f543
jonatack:
ACK 222290f543 tested and reviewed rebased to current master 5e213822f8
theStack:
Tested ACK 222290f543
Tree-SHA512: d69c637a62a64b8e87de8c7f0b305823d8f4d115c1852514b923625dbbcf9a4854b5bb3771ff41702ebf47c4c182a4442c6d7c0b9f282c95a34b83e56a73939b
82b6f89819 [style] Small style improvements to DNS parameters (Amiti Uttarwar)
4c89e24f64 [test] Test the delay before querying DNS seeds (Amiti Uttarwar)
6395c8ed56 [test] Test the interactions between -forcednsseed and -dnsseed (Amiti Uttarwar)
6f6b7df6bd [init] Disallow starting up with conflicting paramters for -dnsseed and -forcednsseed (Amiti Uttarwar)
26d0ffe4f2 [test] Test -forcednsseed causes querying DNS seeds (Amiti Uttarwar)
35851450a9 [test] Test the interactions between -connect and -dnsseed (Amiti Uttarwar)
75c05af361 [test] Test logic to query DNS seeds with block-relay-only connections (Amiti Uttarwar)
9c08719778 [test] Introduce test logic to query DNS seeds (Amiti Uttarwar)
Pull request description:
This PR adds a DNS seed to the regtest chain params to enable testing the DNS seed querying logic of `CConnman::ThreadDNSAddressSeed` and relevant startup parameters. Adds coverage for the changes in #22013 (and then some).
The main behavioral change to bitcoind is that this PR disallows starting up with conflicting parameters for `-dnsseed` and `-forcednsseed`.
The tests include:
* parameter interactions of different combinations of `-connect`, `-dnsseed` and `-forcednsseed`
* the delay before querying DNS seeds depending on how many addresses are in the addrman
* the behavior of `-forcednsseed`
* skipping DNS querying if we have outbound full relay connections & not block-relay-only connections
Huge props to mzumsande for identifying the timing technique for testing successful connections before running `ThreadDNSAddressSeed` 🙌🏽
ACKs for top commit:
mzumsande:
ACK 82b6f89819
jnewbery:
reACK 82b6f89819
Tree-SHA512: 9f0c29bfbf99426727e79c0a25606ae09deab91a92e3c5cee7f84c3ca7503a8ac9ab85a85c51841d40b164ef8c991326070f0b2f41d075fb7985df26f6e95d6d
