Add simple interfaces::Echo IPC interface with one method that just takes and
returns a string, to test multiprocess framework and provide an example of how
it can be used to spawn and call between processes.
fa4e088cba wallet: Mark replaced tx to not be in the mempool anymore (MarcoFalke)
Pull request description:
The wallet does not mark the replaced tx as out-of-mempool. This causes failures in user scripts, because later RPCs may depend on this state change from `bumpfee`.
For example, the following might fail on current master:
```
txid = sendtoaddress(...)
bumpfee(txid)
abandontransaction(txid) # fails because txid is still marked as "in mempool"
```
Fixes#18831
ACKs for top commit:
meshcollider:
utACK fa4e088cba
ryanofsky:
Code review ACK fa4e088cba, and previous ACK faeedff5c87091fd83d2fb2b29eb49c948363f29 is also still valid in case there's a preference for the original fix
Tree-SHA512: 9858f40f5fb5a43a7b584b5c4268b6befa82e6a84583be5206fe721bcb6c255e8d35479d347d0b9aed72703df49887c02b14ab680e8efdd28b90dd6b93d9439a
Stop giving GUI access to destdata rows in database. Replace with narrow
API just for saving and reading receive request information.
This simplifies code and should prevent the GUI from interfering with
other destdata like address-used status.
Note: No user-visible behavior is changing in this commit. New
CWallet::SetAddressReceiveRequest() implementation avoids a bug in
CWallet::AddDestData() where a modification would leave the previous
value in memory while writing the new value to disk. But it doesn't
matter because the GUI doesn't currently expose the ability to modify
receive requests, only to add and erase them.
Using the zmq notifications to avoid excessive mempool polling can be difficult
given the current notifications available. It announces all transactions
being added to mempool or included in blocks, but announces no evictions
and gives no indication if the transaction is in the mempool or a block.
Block notifications for zmq are also substandard, in that it only announces
block tips, while all block transactions are still announced.
This commit adds a unified stream which can be used to closely track mempool:
1) getrawmempool to fill out mempool knowledge
2) if txhash is announced, add or remove from set
based on add/remove flag
3) if blockhash is announced, get block txn list,
remove from those transactions local view of mempool
4) if we drop a sequence number, go to (1)
The mempool sequence number starts at the value 1, and
increments each time a transaction enters the mempool,
or is evicted from the mempool for any reason, including
block inclusion. The mempool sequence number is published
via ZMQ for any transaction-related notification.
These features allow for ZMQ/RPC consumer to track mempool
state in a more exacting way, without unnecesarily polling
getrawmempool. See interface_zmq.py::test_mempool_sync for
example usage.
No longer create a default wallet. The default wallet will still be
loaded if it exists and not other wallets were specified (anywhere,
including settings.json, bitcoin.conf, and command line).
Tests are updated to be started with -wallet= if they need the default
wallet.
Added test to wallet_startup.py testing that no default wallet is
created and that it is loaded if it exists and no other wallets were
specified.
7bf6dfbb48 wallet: Remove path checking code from bitcoin-wallet tool (Russell Yanofsky)
77d5bb72b8 wallet: Remove path checking code from createwallet RPC (Russell Yanofsky)
a987438e9d wallet: Remove path checking code from loadwallet RPC (Russell Yanofsky)
8b5e7297c0 refactor: Pass wallet database into CWallet::Create (Russell Yanofsky)
3c815cfe54 wallet: Remove Verify and IsLoaded methods (Russell Yanofsky)
0d94e60625 refactor: Use DatabaseStatus and DatabaseOptions types (Russell Yanofsky)
b5b414151a wallet: Add MakeDatabase function (Russell Yanofsky)
288b4ffb6b Remove WalletLocation class (Russell Yanofsky)
Pull request description:
Get rid of file path handling in wallet application code and move it down to database layer.
There is no change in behavior except for some changed error messages.
Motivation for this change is to make code more understandable, but also to prepare for adding SQLite support in #19077 so SQLite implementation can be contained at the database layer and wallet loading code does not need to become more complicated.
ACKs for top commit:
achow101:
ACK 7bf6dfbb48
meshcollider:
Code re-review and functional test run ACK 7bf6dfbb48
Tree-SHA512: 23ad18324c9e8947f0cf88a3734c2e9fb25536b2cb4d552cf5d1a4ade320fbffb73bb2d1b3a99585c11630aa7092e0fcfc2dd4fe65b91e3a54161433a5cd13cb
This removes a source of complexity and indirection that makes it harder to
understand path checking code. Path checks will be simplified in upcoming
commits.
There is no change in behavior in this commit other than a slightly more
descriptive error message in `loadwallet` if the default "" wallet can't be
found. (The error message is improved more in upcoming commit "wallet: Remove
path checking code from loadwallet RPC".)
Enable the GUI to also use the load_on_startup feature.
Wallets loaded in the GUI always have load_on_startup=true.
When they are unloaded from the GUI, load_on_startup=false.
To facilitate this change, UpdateWalletSetting is moved into the wallet
module and called from within LoadWallet, RemoveWallet, and
Createwallet. This change does not actually touch the GUI code but
rather the wallet functions that are shared between the GUI and RPC.
Add WalletClient interface so node interface is cleaner and don't need
wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate
global wallet variables like ::vpwallets, because createWallet(), loadWallet(),
getWallets(), etc methods called by the GUI need a way to get a reference to
the list of open wallets if it is no longer a global variable.
Also tweaks splash screen registration for load wallet events to be delayed
until after wallet client is created.
Add AppInitInterfaces function so wallet chain and chain client interfaces are
created earlier during initialization. This is needed in the next commit to
allow the gui splash screen to be able to register for wallet events through a
dedicated WalletClient interface instead managing wallets indirectly through
the Node interface. This only works if the wallet client interface is created
before the splash screen needs to use it.
Change gui code to use gArgs, Params() functions directly instead of going
through interfaces::Node.
Remotely accessing bitcoin-node ArgsManager from bitcoin-gui works fine in
https://github.com/bitcoin/bitcoin/pull/10102, when bitcoin-gui spawns a new
bitcoin-node process and controls its startup, but for bitcoin-gui to support
-ipcconnect option in https://github.com/bitcoin/bitcoin/pull/19461 and connect
to an existing bitcoin-node process, it needs ability to parse arguments itself
before connecting out.
This change also simplifies https://github.com/bitcoin/bitcoin/pull/10102 a
bit, by making the bitcoin-gui -> bitcoin-node startup sequence more similar to
the bitcoin-node -> bitcoin-wallet startup sequence where the parent process
parses arguments and passes them to the child process instead of the parent
process using the child process to parse arguments.
This maintains a persistent list of wallets stored in settings that will
automatically be loaded on startup. Being able to load a wallet automatically
on startup will be more useful in the GUI when the option to create wallets is
added in #15006, but it's reasonable to expose this feature by RPC as well.
edc316020e test: Remove duplicate NodeContext hacks (Russell Yanofsky)
Pull request description:
Qt tests currently are currently using two NodeContext structs at the same time, one in interfaces::NodeImpl::m_context, and the other in BasicTestingSetup::m_node, and the tests have hacks transferring state between them.
Fix this by getting rid of the NodeImpl::m_context struct and making it a pointer. This way a common BitcoinApplication object can be used for all qt tests, but they can still have their own testing setups.
Non-test code is changing but non-test behavior is still the same as before.
Motivation for this PR is to be able to remove the "std::move(test.m_node.connman)" and mempool hacks for swapping individual NodeContext members in Qt tests, because followup PR #19099 adds yet another member (wallet_client) that needs to be swapped. After this change, the whole NodeContext struct can be swapped instead of individual members, so the workarounds are less fragile and invasive.
ACKs for top commit:
MarcoFalke:
crACK edc316020e🌮
promag:
ACK edc316020e.
Tree-SHA512: c1650e4127f43a4020304ca7c13b5d9122fb5723aacd8fa1cf855d03c6052fcfb7685810aa2a5ef708561015f0022fecaacbad479295104ca45d2c17579466a4
9c69cfe4c5 Add <datadir>/settings.json persistent settings storage. (Russell Yanofsky)
eb682c5700 util: Add ReadSettings and WriteSettings functions (Russell Yanofsky)
Pull request description:
Persistent settings are used in followup PRs #15936 to unify gui settings between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to the loadwallet RPC and maintain a dynamic list of wallets that should be loaded on startup that also can be shared between bitcoind and bitcoin-qt.
ACKs for top commit:
MarcoFalke:
Approach re-ACK 9c69cfe4c5🌾
jnewbery:
utACK 9c69cfe4c5
Tree-SHA512: 39fcc6051717117c9141e934de1d0d3f739484be4685cdf97d54de967c8c816502b4fd0de12114433beaa5c5b7060c810fd8ae4e2b3ce7c371eb729ac01ba2e1
Qt tests currently are currently using two NodeContext structs at the same
time, one in interfaces::NodeImpl::m_context, and the other in
BasicTestingSetup::m_node, and the tests have hacks transferring state between
them.
Fix this by getting rid of the NodeImpl::m_context struct and making it a
pointer. This way a common BitcoinApplication object can be used for all qt
tests, but they can still have their own testing setups.
Non-test code is changing but non-test behavior is still the same as before.
Motivation for this PR is to be able to remove the
"std::move(test.m_node.connman)" and mempool hacks for swapping individual
NodeContext members in Qt tests, because followup PR #19099 adds yet another
member (wallet_client) that needs to be swapped. After this change, the whole
NodeContext struct can be swapped instead of individual members, so the
workarounds are less fragile and invasive.
Persistent settings are used in followup PRs #15936 to unify gui settings
between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to
the loadwallet RPC and maintain a dynamic list of wallets that should be loaded
on startup that also can be shared between bitcoind and bitcoin-qt.
fa927ff884 Enable Wswitch for OutputType (MarcoFalke)
faddad71f6 Remove confusing OutputType::CHANGE_AUTO (MarcoFalke)
fa2eb38352 interfaces: Remove unused getDefaultChangeType (MarcoFalke)
Pull request description:
`OutputType::CHANGE_AUTO` is problematic for several reasons:
* An output that is not change must never be described by `CHANGE_AUTO`. Simply allowing that option makes the code confusing and review harder than it needs to be.
* To make review even harder, `CHANGE_AUTO` requires `-Wswitch` to be disabled for `OutputType`
Fix both issues by removing `CHANGE_AUTO` and then enabling `-Wswitch` for `OutputType`
ACKs for top commit:
promag:
Code review ACK fa927ff884.
laanwj:
Code review ACK fa927ff884
Tree-SHA512: 24fd809757aa343866c94dafe9a7130b50cda4f77c97666d407f99b813f75b115a7d8e688a6bc2a737e87cba64ddd4e43f2b3c5538fd35fabb5845807bb39134
In FillPSBT, optionally report the number of inputs we successfully
signed, as an out parameter. If "sign" is false, instead report the
number of inputs for which GetSigningProvider does not return nullptr.
(This is a potentially overbroad estimate of inputs we could sign.)
fs.cpp:35:17: error: no member named 'strerror' in namespace 'std'
return std::strerror(errno);
~~~~~^
fs.cpp:49:9: error: use of undeclared identifier 'close'
close(fd);
^
2 errors generated.
./interfaces/chain.h:265:55: error: ‘std::function’ has not been declared
virtual void rpcRunLater(const std::string& name, std::function<void()> fn, int64_t seconds) = 0;
^~~
4a7253ab6c Remove g_rpc_chain global (Russell Yanofsky)
e783197bf0 refactor: replace RegisterWalletRPCCommands with GetWalletRPCCommands (Russell Yanofsky)
Pull request description:
Replace with RPC request reference to new WalletContext struct similar to the existing NodeContext struct and reference.
This PR is a followup to #18740 removing the g_rpc_node global.
Some later PRs will follow this up and move more wallet globals to the WalletContext struct.
ACKs for top commit:
MarcoFalke:
ACK 4a7253ab6c🎋
ariard:
Code Review ACK 4a7253a, feel free to ignore comment it's super nit.
Tree-SHA512: 5bb5561c89f81811ca5232a58bf450e230d4218e62471c03227d142395fd36131672e99cb88329b33b9680a235db01e8b9d1c1e2a18288349e57205528deabab
7eaf86d3bf trivial: Suggested cleanups to surrounding code (Russell Yanofsky)
b604c5c8b5 wallet: Minimal fix to restore conflicted transaction notifications (Russell Yanofsky)
Pull request description:
This fix is a based on the fix by Antoine Riard (ariard) in https://github.com/bitcoin/bitcoin/pull/18600.
Unlike that PR, which implements some new behavior, this just restores previous wallet notification and status behavior for transactions removed from the mempool because they conflict with transactions in a block. The behavior was accidentally changed in two `CWallet::BlockConnected` updates: a31be09bfd and 7e89994133 from https://github.com/bitcoin/bitcoin/pull/16624, causing issue https://github.com/bitcoin/bitcoin/issues/18325.
The change here could be improved and replaced with a more comprehensive cleanup, so it includes a detailed comment explaining future considerations.
Fixes#18325
Co-authored-by: Antoine Riard (ariard)
ACKs for top commit:
jonatack:
Re-ACK 7eaf86d3bf
ariard:
ACK 7eaf86d, reviewed, built and ran tests.
MarcoFalke:
ACK 7eaf86d3bf🍡
Tree-SHA512: 9a1efe975969bb522a9dd73c41064a9348887cb67883cd92c6571fd2df4321b9f4568363891abdaae14a3b9b168ef8142e95c373fc04677e46289b251fb84689
da73f1513a qt: Fix shutdown when waitfor* cmds are called from RPC console (Hennadii Stepanov)
Pull request description:
On master (7eed413e72), if the GUI has been started with`-server=1`, `bitcoin-qt` hangs on shutdown during calling any of the `waitfor*` commands in the GUI RPC console.
This PR suggests minimal changes to fix this bug.
Fix#17495
ACKs for top commit:
jonasschnelli:
utACK da73f1513a
Tree-SHA512: 469f5332945a5f2c57d19336cda5df79b123ccc494aea6d58a85eb1293be52708b2b9c5bb6bc2c402a90b7b4e9e8d7ab8fe84cf201cf7ce612c9290c57e43681
Replace with RPC request reference to new WalletContext struct similar to the
existing NodeContext struct and reference.
This PR is a followup to 25ad2c623ahttps://github.com/bitcoin/bitcoin/pull/18740 removing the g_rpc_node global.
Some later PRs will follow this up and move more wallet globals to the
WalletContext struct.
Co-authored-by: João Barbosa <joao.paulo.barbosa@gmail.com>
b3f7f375ef refactor: Remove g_rpc_node global (Russell Yanofsky)
ccb5059ee8 scripted-diff: Remove g_rpc_node references (Russell Yanofsky)
6fca33b2ed refactor: Pass NodeContext to RPC and REST methods through util::Ref (Russell Yanofsky)
691c817b34 Add util::Ref class as temporary alternative for c++17 std::any (Russell Yanofsky)
Pull request description:
This PR removes the `g_rpc_node` global, to get same benefits we see removing other globals and make RPC code more testable, modular, and reusable.
This uses a hybrid of the approaches suggested in #17548. Instead of using `std::any`, which isn't available in c++11, or `void*`, which isn't type safe, it uses a small new `util::Ref` helper class, which acts like a simplified `std::any` that only holds references, not values.
Motivation for writing this was to provide an simpler alternative to #18647 by Harris Brakmić (brakmic) which avoids some shortcomings of that PR (https://github.com/bitcoin/bitcoin/pull/18647#issuecomment-617878826)
ACKs for top commit:
MarcoFalke:
re-ACK b3f7f375ef, only change is adding back const and more tests 🚾
ajtowns:
ACK b3f7f375ef
Tree-SHA512: 56292268a001bdbe34d641db1180c215351503966ff451e55cc96c9137f1d262225d7d7733de9c9da7ce7d7a4b34213a98c2476266b58c89dbbb0f3cb5aa5d70
d3a56be77a Revert "gui: Avoid Wallet::GetBalance in WalletModel::pollBalanceChanged" (Russell Yanofsky)
bf0a510981 gui: Avoid wallet tryGetBalances calls before TransactionChanged or BlockTip notifications (Russell Yanofsky)
2bc9b92ed8 Cancel wallet balance timer when shutdown requested (Russell Yanofsky)
83f69fab3a Switch transaction table to use wallet height not node height (Russell Yanofsky)
Pull request description:
Main commit `gui: Avoid wallet tryGetBalances calls` is one-line change to `WalletModel::pollBalanceChanged` that returns early if there hasn't been a new `TransactionChanged` or `BlockTip` notification since the previous poll call. This is the same behavior that was implemented in #18160, now implemented in a simpler way.
The other commits are a straight revert of #18160, and two tweaks to avoid relying on `WalletModel::m_client_model` lifetime which were causing travis failures with earlier versions of this PR.
Motivation for this change is to be able to revert #18160 and cut down on unnecessary cross-process calls that happen when #18160 is combined with #10102
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
ACKs for top commit:
jonasschnelli:
utACK d3a56be77a
Tree-SHA512: 3cd31ca515e77c3bd7160d3f1ea0dce5050d4038b2aa441b6f66b8599bd413d81ca5542a197806e773d6092dd1d26830932b1cecbc95298b1f1ab41099e2f12f
This fix is a based on the fix by Antoine Riard <ariard@student.42.fr> in
https://github.com/bitcoin/bitcoin/pull/18600.
Unlike that PR, which implements some new behavior, this just restores previous
wallet notification and status behavior for transactions removed from the
mempool because they conflict with transactions in a block. The behavior was
accidentally changed in two `CWallet::BlockConnected` updates:
a31be09bfd and
7e89994133 from
https://github.com/bitcoin/bitcoin/pull/16624, causing issue
https://github.com/bitcoin/bitcoin/issues/18325.
The change here could be improved and replaced with a more comprehensive
cleanup, so it includes a detailed comment explaining future considerations.
Fixes#18325
Co-authored-by: Antoine Riard <ariard@student.42.fr>
d044e0ec7d refactor: Remove override for final overriders (Hennadii Stepanov)
1551cea2d5 refactor: Use override for non-final overriders (Hennadii Stepanov)
Pull request description:
Two commits are split out from #16710 to make reviewing [easier](https://github.com/bitcoin/bitcoin/pull/16710#issuecomment-625760894).
From [C++ FAQ](https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines.html#c128-virtual-functions-should-specify-exactly-one-of-virtual-override-or-final):
> C.128: Virtual functions should specify exactly one of virtual, override, or final
> **Reason** Readability. Detection of mistakes. Writing explicit `virtual`, `override`, or `final` is self-documenting and enables the compiler to catch mismatch of types and/or names between base and derived classes. However, writing more than one of these three is both redundant and a potential source of errors.
ACKs for top commit:
practicalswift:
ACK d044e0ec7d: consistent use of `override` prevents bugs + patch looks correct + Travis happy
MarcoFalke:
ACK d044e0ec7d, based on my understanding that adding `override` or `final` to a function must always be correct, unless it doesn't compile!?
vasild:
ACK d044e0ec7
Tree-SHA512: 245fd9b99b8b5cbf8694061f892cb3435f3378c97ebed9f9401ce86d21890211f2234bcc39c9f0f79a4d2806cb31bf8ce41a0f9c2acef4f3a2ac5beca6b077cf
Also, mark feebumper bilingual_str as Untranslated
They are technical and have previously not been translated either.
It is questionable whether they can even appear in the GUI.
Common errors and warnings should be translated when displayed in the
GUI, but not translated when displayed elsewhere. The wallet method
CreateWalletFromFile does not know its caller, so this commit changes it
to return a bilingual_str to the caller.
This reverts commit 0933a37078 from
https://github.com/bitcoin/bitcoin/pull/18160 which no longer an optimization
since commit "gui: Avoid wallet tryGetBalances calls before TransactionChanged
or BlockTip notifications".
This change is intended to make the bitcoin node and its rpc, network
and gui interfaces more responsive while the wallet is in use. Currently
because the node's cs_main mutex is always locked before the wallet's
cs_wallet mutex (to prevent deadlocks), cs_main currently stays locked
while the wallet does relatively slow things like creating and listing
transactions.
This commit only remmove chain lock tacking in wallet code, and invert
lock order from cs_main, cs_wallet to cs_wallet, cs_main.
must happen at once to avoid any deadlock. Previous commit were only
removing Chain::Lock methods to Chain interface and enforcing they
take cs_main.
Remove LockChain method from CWallet and Chain::Lock interface.
48973402d8 wallet: Avoid use of Chain::Lock in CWallet::GetKeyBirthTimes (Russell Yanofsky)
e958ff9ab5 wallet: Avoid use of Chain::Lock in CWallet::CreateTransaction (Russell Yanofsky)
c0d07dc4cb wallet: Avoid use of Chain::Lock in CWallet::ScanForWalletTransactions (Russell Yanofsky)
1be8ff280c wallet: Avoid use of Chain::Lock in rescanblockchain (Russell Yanofsky)
3cb85ac594 wallet refactor: Avoid use of Chain::Lock in CWallet::RescanFromTime (Russell Yanofsky)
f7ba881bc6 wallet: Avoid use of Chain::Lock in listsinceblock (Russell Yanofsky)
bc96a9bfc6 wallet: Avoid use of Chain::Lock in importmulti (Russell Yanofsky)
25a9fcf9e5 wallet: Avoid use of Chain::Lock in importwallet and dumpwallet (Russell Yanofsky)
c1694ce6bb wallet: Avoid use of Chain::Lock in importprunedfunds (Russell Yanofsky)
ade5f87971 wallet refactor: Avoid use of Chain::Lock in qt wallettests (Russell Yanofsky)
f6da44ccce wallet: Avoid use of Chain::Lock in tryGetTxStatus and tryGetBalances (Russell Yanofsky)
bf30cd4922 refactor: Add interfaces::FoundBlock class to selectively return block data (Russell Yanofsky)
Pull request description:
This is a set of changes updating wallet code to make fewer calls to `Chain::Lock` methods, so the `Chain::Lock` class will be easier to remove in #16426 with fewer code changes and small changes to behavior.
ACKs for top commit:
MarcoFalke:
re-ACK 48973402d8, only change is fixing bug 📀
fjahr:
re-ACK 48973402d8, reviewed rebase and changes since last review, built and ran tests locally
ariard:
Coce Review ACK 4897340, only changes are one suggested by last review on more accurate variable naming, human-readable output, args comments in `findCommonAncestor`
Tree-SHA512: cfd2f559f976b6faaa032794c40c9659191d5597b013abcb6c7968d36b2abb2b14d4e596f8ed8b9a077e96522365261299a241a939b3111eaf729ba0c3ef519b
3ce16ad2f9 refactor: Use psbt forward declaration (Russell Yanofsky)
1dde238f2c Add ChainClient setMockTime, getWallets methods (Russell Yanofsky)
Pull request description:
This PR is part of the [process separation project](https://github.com/bitcoin/bitcoin/projects/10).
These changes are needed to set mock times, and get wallet interface pointers correctly when
wallet code is running in a different process from node code in #10102
ACKs for top commit:
MarcoFalke:
re-ACK 3ce16ad2f9🔙
promag:
Code review ACK 3ce16ad2f9.
Tree-SHA512: 6c093bfcd68adf5858a1aade4361cdb7fb015496673504ac7a93d0bd2595215047184551d6fd526baa27782331cd2819ce45c4cf923b205ce93ac29e485b5dd8
Previous versions assumed absence of an entry in mapAddressBook indicated change.
This no longer holds true (due to bugs) and will shortly be made intentional.
Renaming the field helps ensure that old code using mapAddressBook directly gets checked for necessary rebasing.
-BEGIN VERIFY SCRIPT-
sed -i -e 's/mapAddressBook/m_address_book/g' $(git grep -l 'mapAddressBook' ./src)
-END VERIFY SCRIPT-
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change only affects behavior in the case where wallet last block processed
falls behind the chain tip, where it will treat the last block processed as the
current tip.
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change affects behavior in a few small ways.
- If there's no max_height specified, percentage progress is measured ending at
wallet last processed block instead of node tip
- More consistent error reporting: Early check to see if start_block is on the
active chain is removed, so start_block is always read and the triggers an
error if it's unavailable
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change only affects behavior in the case where wallet last block processed
falls behind the chain tip. The rescanblockchain error height error checking
will just be stricter in this case and only accept values up to the last
processed height
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change only affects behavior in the case where wallet last block processed
falls behind the chain tip. Previously listsinceblock might not have returned
all transactions up to the claimed "lastblock" value in this case, resulting in
race conditions and potentially missing transactions in cases where
listsinceblock was called in a loop like
https://github.com/bitcoin/bitcoin/issues/14338#issuecomment-426706574
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change only affects behavior in the case where wallet last block processed
falls behind the chain tip, in which case it may use a more accurate rescan
time.
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
This change only affects behavior in the case where wallet last block processed
falls behind the chain tip, in which case the "Block not found in chain" error
will be stricter and not allow importing data from a blocks between the wallet
last processed tip and the current node tip.
This is a step toward removing the Chain::Lock class and reducing cs_main
locking.
It also helps ensure the GUI display stays up to date in the case where the
node chain height runs ahead of wallet last block processed height.
FoundBlock class allows interfaces::Chain::findBlock to return more block
information without having lots of optional output parameters. FoundBlock class
is also used by other chain methods in upcoming commits.
There is mostly no change in behavior. Only exception is
CWallet::RescanFromTime now throwing NonFatalCheckError instead of
std::logic_error.
41b0baf43c gui: Handle WalletModel::unload asynchronous (João Barbosa)
ab31b9d6fe Fix wallet unload race condition (Russell Yanofsky)
Pull request description:
This PR consists in two fixes. The first fixes a concurrency issues with `boost::signals2`. The second fixes a wallet model destruction while it's being used.
From boost signal documentation at https://www.boost.org/doc/libs/1_72_0/doc/html/signals2/thread-safety.html:
> When a signal is invoked by calling signal::operator(), the invocation first acquires a lock on the signal's mutex. Then it obtains a handle to the signal's slot list and combiner. Next it releases the signal's mutex, before invoking the combiner to iterate through the slot list.
This means that `UnregisterValidationInterface` doesn't prevent more calls to that interface. The fix consists in capturing the `shared_ptr<CValidationInterface>` in each internal slot.
The GUI bug is fixed by using a `Qt::QueuedConnection` in the `WalletModel::unload` connection.
ACKs for top commit:
ryanofsky:
Code review ACK 41b0baf43c. Only change is moving assert as suggested
hebasto:
ACK 41b0baf43c, tested on Linux Mint 19.3.
Tree-SHA512: 4f712d8de65bc1214411831250de5dc0a9fd505fb84da5baf9f2cc4d551bc3abffc061616f00afe43dba7525af2cd96c9b54aeead9383145e3b8801f25d85f50
0933a37078 gui: Avoid Wallet::GetBalance in WalletModel::pollBalanceChanged (João Barbosa)
Pull request description:
Each 250ms the slot `WalletModel::pollBalanceChanged` is called which, at worst case, calls `Wallet::GetBalance`. This is a waste of resources since most of the time there aren't new transactions or new blocks. Fix this by early checking if cache is dirty or not.
The actual balance computation can still hang the GUI thread but that is tracked in #16874 and should be fixed with a solution similar to #17135.
ACKs for top commit:
hebasto:
ACK 0933a37078, I have not tested the code, but I have reviewed it and it looks OK, I agree it can be merged.
jonasschnelli:
utACK 0933a37078
instagibbs:
ACK 0933a37078
ryanofsky:
Code review ACK 0933a37078, but I would prefer (not strongly) for #17905 to be merged first. This PR can be simpler if it is based on #17905, so tryGetBalances can just be left alone instead of changing into to a more complicated tryGetBalancesIfNeeded function, and then getting changed back later when we want to optimize it out.
jonatack:
ACK 0933a37078 based primarily on code review, despite a lot of manual testing with a large 177MB wallet.
Tree-SHA512: 18db35bf33a7577666658c8cb0b57308c8474baa5ea95bf1468cd8531a69857d8915584f6ac505874717aa6aabeb1b506ac77630f8acdb6651afab89275e38a1
ff9c671b11 refactor: Work around GCC 9 `-Wredundant-move` warning (Russell Yanofsky)
b837b334db net: Fail instead of truncate command name in CMessageHeader (Wladimir J. van der Laan)
Pull request description:
Fixes all 3 from #16992 (see commits)
- net: Fail instead of truncate command name in CMessageHeader
- refactor: Use std::move workaround for unique_ptr upcast only when necessary
ACKs for top commit:
practicalswift:
ACK ff9c671b11 -- patch looks correct
sipa:
utACK ff9c671b11
ryanofsky:
Code review ACK ff9c671b11. Looks good and seems to pass travis, modulo a timeout on one build
hebasto:
ACK ff9c671b11, tested on Fedora 31:
Tree-SHA512: 52d8c13aaf0d56f9bc546a98d7f853eae21f7e325b202fdeb2286b19a9a0ee308634c644b039f60ad8043421e382381cbf1bce58d9f807547f928621c7d245d0
Currently it's possible for ReleaseWallet to delete the CWallet pointer while
it is processing BlockConnected, etc chain notifications.
To fix this, unregister from notifications earlier in UnloadWallet instead of
ReleaseWallet, and use a new RegisterSharedValidationInterface function to
prevent the CValidationInterface shared_ptr from being deleted until the last
notification is actually finished.
c3857c5fcb wallet: remove CreateTotalBumpTransaction() (Jon Atack)
4a0b27bb01 wallet: remove totalfee from createBumpTransaction() (Jon Atack)
e347cfa9a7 rpc: remove deprecated totalFee arg from RPC bumpfee (Jon Atack)
bd05f96d79 test: delete wallet_bumpfee_totalfee_deprecation.py (Jon Atack)
a6d1ab8caa test: update bumpfee testing from totalFee to fee_rate (Jon Atack)
Pull request description:
Since 0.19, fee-bumping using `totalFee` was deprecated in #15996 and replaced by `fee_rate` in #16727. This changeset removes it.
ACKs for top commit:
laanwj:
ACK c3857c5fcb
Tree-SHA512: c1bb15d664baf4d2dea06981f36384af02057d125c51fcbc8640b9d5563532187c7b84aa952f7b575255a88ce383ed4d7495bec920a47b05b6fc0d432dce1f00
