c119ba3c9b [doc] clarify getdata limit after #14897 (Michael Polzer)
Pull request description:
GETDATA is limited to blocks and transactions now and can't be used for other non-block data
ACKs for top commit:
laanwj:
ACK c119ba3c9b
theStack:
ACK c119ba3c9b
benthecarman:
ACK c119ba3c9b
Tree-SHA512: d6e9c109bcce4ef004ec83a9ec591163279476524dec97ed5f5c34e322dca35af66a168f0878ff972bbcec79d81623903f3619fedf8f88cdced3f3f66a779173
-dropmessagestest is a command line option that causes 1 in n received
messages to be dropped. The Bitcoin P2P protocol is stateful and in
general cannot handle messages being dropped. Dropped
version/verack/ping/pong messages will cause the connection to time out
and be torn down. Other dropped messages may also cause the peer to
believe that the peer has stalled and tear down the connection.
It seems difficult to uncover any actual issues with -dropmessagestest,
and any coverage that could be generated would probably be easier to
trigger with fuzz testing.
BIP 130 (sendheaders) and BIP 152 (compact blocks) do not specify at
which stage the `sendheaders` or `sendcmpct` messages should be sent.
Therefore we should tolerate them being sent before the version-verack
handshake is complete.
7fabe0f359 net: don't relay to the address' originator (Vasil Dimov)
Pull request description:
For each address to be relayed we "randomly" pick 2 nodes to send the
address to (in `RelayAddress()`). However we do not take into
consideration that it does not make sense to relay the address back to
its originator (`CNode::PushAddress()` will do nothing in that case).
This means that if the originator is among the "randomly" picked nodes,
then we will relay to one node less than intended.
Fix this by skipping the originating node when choosing candidates to
relay to.
ACKs for top commit:
sdaftuar:
ACK 7fabe0f359 (this time I looked at the test, and verified the test breaks in expected ways if I break the code).
jnewbery:
utACK 7fabe0f359 (only net_processing changes. I haven't reviewed the test changes)
jonatack:
re-ACK 7fabe0f359 per `git range-diff b76abae fd897f8 7fabe0f`, change since last review is rebase and more readable Doxygen documentation
Tree-SHA512: c6a9d11c7afc97ab4e8960513f6416648d4a8c0c64b713c145a7482a7b9e54946f81386a3351e3ec0011e5594ba5ccff4d10c6f656bb80680d9f0d0a63366165
f6360088de [net processing] Clarify UpdatedBlockTip() (John Newbery)
94d2cc35be [net processing] Remove unnecesary nNewHeight variable in UpdatedBlockTip() (John Newbery)
8b57013473 [net processing] Remove nStartingHeight check from block relay (John Newbery)
Pull request description:
nStartingHeight was introduced in commit 7a47324c7 (Bitcoin version
0.2.9, P2P version 209) with the comment "better prevention of inventory
relaying during initial download". At that time, there was no function
to determine whether the node was still in Initial Block Download, so to
prevent syncing nodes from relaying old blocks to their peers, a check
was added to never relay a block to a peer where the height was lower
than 2000 less than the peer's best block. That check was updated
several times in later commits to ensure that we weren't relaying blocks
before the latest checkpoint if the peer didn't provide a
startingheight. The checkpoint comparison was changed to compare with an
estimate of the highest block in commit eae82d8e.
In commit 202e0194, all block relay was gated on being out of Initial
Block Download. In commit 0278fb5f, the comparison to nBlockEstimate was
removed since "we already checked IsIBD()".
We can remove the check against nStartingHeight entirely. If the node is
out of Initial Block Download, then its tip height must have been within
24 hours of current time, so should not be more than ~144 blocks behind
the most work tip.
This simplifies moving block inventory state into the `Peer` object (#19829).
ACKs for top commit:
Sjors:
utACK f636008
jonatack:
ACK f6360088de
MarcoFalke:
ACK f6360088de💽
ariard:
Code Review ACK f636008
Tree-SHA512: 4959cf35f1dcde46f34bffec1375729a157e1b2a1fd8a8ca33da9771c3c89a6c43e7050cdeeab8d90bb507b0795703db8c8bc304a1a5065ef00aae7a6992ca4f
4b7b58b3fe Update net_processing WTXID documentation per BIP339 (Jon Atack)
Pull request description:
BIP339 currently states:
*The wtxidrelay message MUST be sent in response to a version message from a peer whose protocol version is >= 70016 and prior to sending a verack. A wtxidrelay message received after a verack message MUST be ignored or treated as invalid.*
ACKs for top commit:
MarcoFalke:
ACK 4b7b58b3fe
practicalswift:
ACK 4b7b58b3fe
RiccardoMasutti:
ACK 4b7b58b
Tree-SHA512: 58ca6b197618cc73c70aa5de0a2d9d89a68b4cad9d5a708278ef17a9d6854d4362bcc384b6d29696642924977204a8fc120b31e91e2d97b6072b7b0d41c9f2dc
a33442fdc7 Remove m_is_manual_connection from CNodeState (Antoine Riard)
Pull request description:
Currently, this member is only used to exclude MANUAL peers from discouragement
in MaybePunishNodeForBlock(). Manual connections are already protected in
MaybeDiscourageAndDisconnect(), independently from their network
processing behaviors.
ACKs for top commit:
MarcoFalke:
cr ACK a33442fdc7
promag:
Code review ACK a33442fdc7.
jnewbery:
utACK a33442fdc7
amitiuttarwar:
code review ACK a33442fdc7
Tree-SHA512: cfe3f3dfa131373e3299002d34ae9e22ca6e1a966831bab32fcf06ff1d08f06095b4ab020cc4d267f3ec05ae23fbdc22373382ab828b999c0db11b8c842a4f0c
faaad1bbac p2p: Ignore version msgs after initial version msg (MarcoFalke)
fad68afcff p2p: Ignore non-version msgs before version msg (MarcoFalke)
Pull request description:
Handshake misbehaviour doesn't cost us more than any other unknown message, so it seems odd to treat it differently
ACKs for top commit:
jnewbery:
utACK faaad1bbac
practicalswift:
ACK faaad1bbac: patch looks correct
Tree-SHA512: 9f30c3b5c1f6604fd02cff878f10999956152419a3dd9825f8267cbdeff7d06787418b41c7fde8a00a5e557fe89204546e05d5689042dbf7b07fbb7eb95cddff
nStartingHeight was introduced in commit 7a47324c7 (Bitcoin version
0.2.9, P2P version 209) with the comment "better prevention of inventory
relaying during initial download". At that time, there was no function
to determine whether the node was still in Initial Block Download, so to
prevent syncing nodes from relaying old blocks to their peers, a check
was added to never relay a block to a peer where the height was lower
than 2000 less than the peer's best block. That check was updated
several times in later commits to ensure that we weren't relaying blocks
before the latest checkpoint if the peer didn't provide a
startingheight. The checkpoint comparison was changed to compare with an
estimate of the highest block in commit eae82d8e.
In commit 202e0194, all block relay was gated on being out of Initial
Block Download. In commit 0278fb5f, the comparison to nBlockEstimate was
removed since "we already checked IsIBD()".
We can remove the check against nStartingHeight entirely. If the node is
out of Initial Block Download, then its tip height must have been within
24 hours of current time, so should not be more than ~144 blocks behind
the most work tip.
Currently, this member is only used to exclude MANUAL peers from discouragement
in MaybePunishNodeForBlock(). Manual connections are already protected in
MaybeDiscourageAndDisconnect(), independently from their network
processing behaviors.
To make eclipse attacks more difficult, regularly initiate outbound connections
and stay connected long enough to sync headers and potentially learn of new
blocks. If we learn a new block, rotate out an existing block-relay peer in
favor of the new peer.
This augments the existing outbound peer rotation that exists -- currently we
make new full-relay connections when our tip is stale, which we disconnect
after waiting a small time to see if we learn a new block. As block-relay
connections use minimal bandwidth, we can make these connections regularly and
not just when our tip is stale.
Like feeler connections, these connections are not aggressive; whenever our
timer fires (once every 5 minutes on average), we'll try to initiate a new
block-relay connection as described, but if we fail to connect we just wait for
our timer to fire again before repeating with a new peer.
For each address to be relayed we "randomly" pick 2 nodes to send the
address to (in `RelayAddress()`). However we do not take into
consideration that it does not make sense to relay the address back to
its originator (`CNode::PushAddress()` will do nothing in that case).
This means that if the originator is among the "randomly" picked nodes,
then we will relay to one node less than intended.
Fix this by skipping the originating node when choosing candidates to
relay to.
343dc4760f test: add test for high-bandwidth mode states in getpeerinfo (Sebastian Falbesoner)
dab6583307 doc: release note for new getpeerinfo fields "bip152_hb_{from,to}" (Sebastian Falbesoner)
a7ed00f8bb rpc: expose high-bandwidth mode states via getpeerinfo (Sebastian Falbesoner)
30bc8fab68 net: save high-bandwidth mode states in CNodeStats (Sebastian Falbesoner)
Pull request description:
Fixes#19676, "_For every peer expose through getpeerinfo RPC whether or not we selected them as HB peers, and whether or not they selected us as HB peers._" See [BIP152](https://github.com/bitcoin/bips/blob/master/bip-0152.mediawiki), in particular the [protocol flow diagram](https://github.com/bitcoin/bips/raw/master/bip-0152/protocol-flow.png). The newly introduced states are changed on the following places in the code:
* on reception of a `SENDCMPCT` message with valid version, the field `m_highbandwidth_from` is changed depending on the first integer parameter in the message (1=high bandwidth, 0=low bandwidth), i.e. it just mirrors the field `CNodeState.fPreferHeaderAndIDs`.
* after adding a `SENDCMPCT` message to the send queue, the field `m_highbandwidth_to` is changed depending on how the first integer parameter is set (same as above)
Note that after receiving `VERACK`, the node also sends `SENDCMPCT`, but that is only to announce the preferred version and never selects high-bandwidth mode, hence there is no need to change the state variables there, which are initialized to `false` anyways.
ACKs for top commit:
naumenkogs:
reACK 343dc4760f
jonatack:
re-ACK 343dc4760f per `git range-diff 7ea6499 4df1d12 343dc47`
Tree-SHA512: f4999e6a935266812c2259a9b5dc459710037d3c9e938006d282557cc225e56128f72965faffb207fc60c6531fab1206db976dd8729a69e8ca29d4835317b99f
fa11110bff util: Allow use of C++14 chrono literals (MarcoFalke)
Pull request description:
I think we should allow the use of chrono literals for new code to make it less verbose. Obviously old code can stay as-is.
This patch pulls in the needed namespace and replaces some lines for illustrative purposes.
ACKs for top commit:
vasild:
ACK fa11110bff
jonatack:
ACK fa11110bff
Tree-SHA512: ee2b72c8f28dee07b33b9a8ee8f7c87c0bc43b05c56a17b786cf9803ef204c7628e01b02de1af1a4eb01f5cdf6fc336f69c2833e17acd606ebda20ac6917e6bb
3025ca9e77 [net processing] Add RemovePeer() (John Newbery)
a20ab22786 [net processing] Make GetPeerRef const (John Newbery)
ed7e469cee [net_processing] Move peer_map to PeerManager (John Newbery)
a529fd3e3f [net processing] Move GetNodeStateStats into PeerManager (John Newbery)
Pull request description:
This moves `g_peer_map` from a global in net_processing.cpp's unnamed namespace to being a member `m_peer_map` of `PeerManager`.
ACKs for top commit:
theuni:
Re-ACK 3025ca9e77.
dongcarl:
Re-ACK 3025ca9
hebasto:
re-ACK 3025ca9e77, since my [previous](https://github.com/bitcoin/bitcoin/pull/19910#pullrequestreview-545574237) review only reverted the change that introduced NRVO in `PeerManager::GetPeerRef`, and comments are fixed in the proper commits.
Tree-SHA512: 6369eb3c688ac5b84f89f7674115f78ff02edbed76063ac2ebb1759894c9e973883e10821a35dab92bd3d738280acc095bd5368f552a060b83cd309330387d47
1583498fb6 Send and require SENDADDRV2 before VERACK (Pieter Wuille)
c5a8919660 Don't send 'sendaddrv2' to pre-70016 software (Pieter Wuille)
Pull request description:
BIP155 defines addrv2 and sendaddrv2 for all protocol versions, but some implementations reject messages they don't know. As a courtesy, don't send it to nodes with a version before 70016, as no software is known to support BIP155 that doesn't announce at least that protocol version number.
Also move the sending of sendaddrv2 earlier (before sending verack), as proposed in https://github.com/bitcoin/bips/pull/1043. This has the side effect that local address broadcast of torv3 will work (as it'll only trigger after we know whether or not the peer supports addrv2).
ACKs for top commit:
MarcoFalke:
ACK 1583498fb6
jnewbery:
ACK 1583498fb6
jonatack:
ACK 1583498fb6
vasild:
ACK 1583498
Tree-SHA512: 3bd5833fa8c8567b6dedd99e4a9b6bb71c127aa66d5284b217503c86d597dc59aa7382c41f3a4bf561bb658b89db81d1a7703a700eef4ffc17cb916660e23a82
65273fa0e7 Clear m_addr_known before our periodic self-advertisement (Suhas Daftuar)
Pull request description:
We use a rolling bloom filter to track which addresses we've previously sent a peer, but after #7125 we no longer clear it every day before our own announcement. This looks to me like an oversight which has the effect of reducing the frequency with which we actually self-announce our own address, so this reintroduces resetting that filter.
ACKs for top commit:
naumenkogs:
ACK 65273fa0e7
laanwj:
Code review ACK 65273fa0e7
sipa:
utACK 65273fa0e7
Tree-SHA512: 602c155fb6d2249b054fcb6f1c0dd17143605ceb87132286bbd90babf26d258ff6c41f9925482c17e2be41805d33f9b83926cb447f394969ffecd4bccfa0a64f
as BIP339 currently states:
"The wtxidrelay message MUST be sent in response to a version
message from a peer whose protocol version is >= 70016 and
prior to sending a verack. A wtxidrelay message received after
a verack message MUST be ignored or treated as invalid."
1816327e53 p2p: Put disconnecting logs into BCLog::NET category (Hennadii Stepanov)
Pull request description:
It's too noisy:
```
$ cat debug.log | wc -l
28529
$ cat debug.log | grep "Disconnecting and discouraging peer" | wc -l
10177
```
ACKs for top commit:
MarcoFalke:
noban, addnode and local peers are still unconditionally logged (as they should), but this one can go into a category, so cr-ACK 1816327e53
practicalswift:
ACK 1816327e53 for the reasons MarcoFalke gave above.
ajtowns:
ACK 1816327e53
Tree-SHA512: c312c1009090840659b2cb1364d8ad9b6ab8e742fc462aef169996d93c76c248507639a00257ed9d73a6916c01176b1793491b2305e92fdded5f9de0935b6ba6
