6b8d872 Protect SSE4 code behind a compile-time flag (Pieter Wuille)
fa9be90 Add selftest for SHA256 transform (Pieter Wuille)
c1ccb15 Add SSE4 based SHA256 (Pieter Wuille)
2991c91 Add SHA256 dispatcher (Pieter Wuille)
4d50f38 Support multi-block SHA256 transforms (Pieter Wuille)
Pull request description:
This adds an SSE4 assembly version of the SHA256 transform by Intel, and uses it at run time if SSE4 instructions are available, and use a fallback C++ implementation otherwise. Nearly every x86_64 CPU supports SSE4. The feature is only enabled when compiled with `--enable-experimental-asm`.
In order to avoid build dependencies and other complications, the original Intel YASM code was translated to GCC extended asm syntax.
This gives around a 50% speedup on the SHA256 benchmark for me.
It is based on an earlier patch by @laanwj, though only includes a single assembly version (for now), and removes the YASM dependency.
Tree-SHA512: d31c50695ceb45264291537b93c0d7497670be38edf021ca5402eaa7d4e1e0e1ae492326e28d4e93979d066168129e62d1825e0384b1b906d36f85d93dfcb43c
f4d00e6 Add a discard_rate (Alex Morcos)
b138585 Remove factor of 3 from definition of dust. (Alex Morcos)
Pull request description:
The definition of dust is redefined to remove the factor of 3.
Dust is redefined to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
A discard_rate is added which defaults to 10,000 sat/kB
Any change output which would be dust at the discard_rate you are
willing to discard completely and add to fee (as well as continuing to
pay the fee that would have been needed for creating the change)
This would be a nice addition for 0.15 and I think will remain useful for 0.16 with the new coin selection algorithms in discussion, but its not crucial.
It does add translation strings, but we could (should?) avoid that by hiding the option
Tree-SHA512: 5b6f655354d0ab6b8b6cac1e8d1fe3136d10beb15c6d948fb15bfb105155a9d03684c6240624039b3eed6428b7e60e54216cc8b2f90c4600701e39f646284a9b
Alternative to #10818, alternative solution to #10815.
After this change: All the AppInit steps before and inclusive
AppInitLockDataDirectory must not have Shutdown() called in case of
failure. Only when AppInitMain fails, Shutdown should be called.
Changes the GUI and bitcoind code to consistently do this.
This redefines dust to be the value of an output such that it would
cost that value in fees to (create and) spend the output at the dust
relay rate. The previous definition was that it would cost 1/3 of the
value. The default dust relay rate is correspondingly increased to
3000 sat/kB so the actual default dust output value of 546 satoshis
for a non-segwit output remains unchanged. This commit is a refactor
only unless a dustrelayfee is passed on the commandline in which case
that number now needs to be increased by a factor of 3 to get the same
behavior. -dustrelayfee is a hidden command line option.
Note: It's not exactly a refactor due to edge case changes in rounding
as evidenced by the required change to the unit test.
959dd8781 Avoid printing incorrect block indexing time due to uninitialized variable (practicalswift)
Tree-SHA512: a76e43c3ffa734ed5c7eadf363f345f268aa0e6ce775aba8f856fe3bbc82f240dc7c734c5ca3ac500a12eb41fae00623413e79f484d5acf809b6e400851d771d
Note that the CScheduler thread cant be running at this point,
it has already been stopped with the rest of the init threadgroup.
Thus, just calling any remaining loose callbacks during Shutdown()
is sane.
Fixes:
init.cpp: In function ‘bool AppInitMain(boost::thread_group&, CScheduler&)’:
init.cpp:1499:56: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
^
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
This requires that we not access pcoinsTip in InitBlockIndex's
FlushStateToDisk (so we just skip it until later in AppInitMain)
and the LoadChainTip in LoadBlockIndex (which there is already one
later in AppinitMain, after ReplayBlocks, so skipping it there is
fine).
Includes some simplifications by Suhas Daftuar and Pieter Wuille.
5a9b508 [trivial] Add end of namespace comments (practicalswift)
Tree-SHA512: 92b0fcae4d1d3f4da9e97569ae84ef2d6e09625a5815cd0e5f0eb6dd2ecba9852fa85c184c5ae9de5117050330ce995e9867b451fa8cd5512169025990541a2b
Part of a series of changes to clean up the instantiation of connman
by decoupling the command line arguments.
We also now abort with an error when explicit binds are set with
-listen=0.
cb24c85 Use rdrand as entropy source on supported platforms (Pieter Wuille)
Tree-SHA512: c42eaa01a14e6bc097c70b6bf8540d61854c2f76cb32be69c2a3c411a126f7b4bf4a4486e4493c4cc367cc689319abde0d4adb799d29a54fd3e81767ce0766fc
Use case: TryCreateDirectory(GetDataDir() / "blocks" / "index") would
fail if the blocks directory was not explicitly created before.
The line that did so was in a weird location and could be removed as a
result.
3ff1fa8 Use override keyword on CCoinsView overrides (Russell Yanofsky)
24e44c3 Don't return stale data from CCoinsViewCache::Cursor() (Russell Yanofsky)
Tree-SHA512: 08699dae0925ffb9c018f02612ac6b7eaf73ec331e2f4f934f1fe25a2ce120735fa38596926e924897c203f7470e99f0a99cf70d2ce31ff428b105e16583a861
c237bd7 wallet: Update formatting (Luke Dashjr)
9cbe8c8 wallet: Forbid -salvagewallet, -zapwallettxes, and -upgradewallet with multiple wallets (Luke Dashjr)
a2a5f3f wallet: Base backup filenames on original wallet filename (Luke Dashjr)
b823a4c wallet: Include actual backup filename in recovery warning message (Luke Dashjr)
84dcb45 Bugfix: wallet: Fix warningStr, errorStr argument order (Luke Dashjr)
008c360 Wallet: Move multiwallet sanity checks to CWallet::Verify, and do other checks on all wallets (Luke Dashjr)
0f08575 Wallet: Support loading multiple wallets if -wallet used more than once (Luke Dashjr)
b124cf0 Wallet: Replace pwalletMain with a vector of wallet pointers (Luke Dashjr)
19b3648 CWalletDB: Store the update counter per wallet (Luke Dashjr)
74e8738 Bugfix: ForceSetArg should replace entr(ies) in mapMultiArgs, not append (Luke Dashjr)
23fb9ad wallet: Move nAccountingEntryNumber from static/global to CWallet (Luke Dashjr)
9d15d55 Bugfix: wallet: Increment "update counter" when modifying account stuff (Luke Dashjr)
f28eb80 Bugfix: wallet: Increment "update counter" only after actually making the applicable db changes to avoid potential races (Luke Dashjr)
Tree-SHA512: 23f5dda58477307bc07997010740f1dc729164cdddefd2f9a2c9c7a877111eb1516d3e2ad4f9b104621f0b7f17369c69fcef13d28b85cb6c01d35f09a8845f23
CCoinsViewCache doesn't actually support cursor iteration returning the
current contents of the cache, so raise an error when the cursor method is
called instead of returning a cursor that iterates over stale data.
Also update the gettxoutsetinfo RPC which was relying on the old behavior to be
explicit about which view it is returning data about.
This adds a new CuckooCache in validation, caching whether all of a
transaction's scripts were valid with a given set of script flags.
Unlike previous attempts at caching an entire transaction's
validity, which have nearly universally introduced consensus
failures, this only caches the validity of a transaction's
scriptSigs. As these are pure functions of the transaction and
data it commits to, this should be much safer.
This is somewhat duplicative with the sigcache, as entries in the
new cache will also have several entries in the sigcache. However,
the sigcache is kept both as ATMP relies on it and because it
prevents malleability-based DoS attacks on the new higher-level
cache. Instead, the -sigcachesize option is re-used - cutting the
sigcache size in half and using the newly freed memory for the
script execution cache.
Transactions which match the script execution cache never even have
entries in the script check thread's workqueue created.
Note that the cache is indexed only on the script execution flags
and the transaction's witness hash. While this is sufficient to
make the CScriptCheck() calls pure functions, this introduces
dependancies on the mempool calculating things such as the
PrecomputedTransactionData object, filling the CCoinsViewCache, etc
in the exact same way as ConnectBlock. I belive this is a reasonable
assumption, but should be noted carefully.
In a rather naive benchmark (reindex-chainstate up to block 284k
with cuckoocache always returning true for contains(),
-assumevalid=0 and a very large dbcache), this connected blocks
~1.7x faster.
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
This patch makes several related changes:
* Changes the CCoinsView virtual methods (GetCoins, HaveCoins, ...)
to be COutPoint/Coin-based rather than txid/CCoins-based.
* Changes the chainstate db to a new incompatible format that is also
COutPoint/Coin based.
* Implements reconstruction code for hash_serialized_2.
* Adapts the coins_tests unit tests (thanks to Russell Yanofsky).
A side effect of the new CCoinsView model is that we can no longer
use the (unreliable) test for transaction outputs in the UTXO set
to determine whether we already have a particular transaction.
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
c1082a7 Chainparams: Use the factory for pow tests (Jorge Timón)
2351a06 Chainparams: Get rid of CChainParams& Params(std::string) (Jorge Timón)
f87f362 Chainparams: Use a regular factory for creating chainparams (Jorge Timón)
Tree-SHA512: 359c8a2a1bc9d02db7856d02810240ada28048ac088f878b575597a7255cdb0ffdd1a647085ee67a34c6a7e7ed9e6cfdb61240cf6e75139619b640dbb096072c
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
f110272 Remove `namespace fs=fs` (Wladimir J. van der Laan)
75594bd torcontrol: Use fs::path instead of std::string for private key path (Wladimir J. van der Laan)
2a5f574 Use fsbridge for fopen and freopen (Wladimir J. van der Laan)
bac5c9c Replace uses of boost::filesystem with fs (Wladimir J. van der Laan)
7d5172d Replace includes of boost/filesystem.h with fs.h (Wladimir J. van der Laan)
19e36bb Add fs.cpp/h (Wladimir J. van der Laan)
Tree-SHA512: 2c34f059dfa6850b9323f3389e9090a6b5f839a457a2960d182c2ecfafd9883c956f5928bb796613402d3aad68ebc78259796a7a313f4a6cfa98aaf507a66842
cd7f394 initialize flag variable to 0 (and continue if GetLogCategory() fails) (John Newbery)
Tree-SHA512: d0f2653bd0e71ed763220cb08d3a5335c5bdfe2f54ff7f9302d97f3265d7aa7f57606fe416a61aaac1535dbb046d0fb40a61f5a9d5cf234b042268e00ee7679d
This changes the logging categories to boolean flags instead of strings.
This simplifies the acceptance testing by avoiding accessing a scoped
static thread local pointer to a thread local set of strings. It
eliminates the only use of boost::thread_specific_ptr outside of
lockorder debugging.
This change allows log entries to be directed to multiple categories
and makes it easy to change the logging flags at runtime (e.g. via
an RPC, though that isn't done by this commit.)
It also eliminates the fDebug global.
Configuration of unknown logging categories now produces a warning.
f885b67 refactor: Make rest.cpp dependency on `*toJSON` in `blockchain.cpp` explicit (Wladimir J. van der Laan)
8d8f28d refactor: Move RPCNotifyBlockChange out of `rpc/server.h` (Wladimir J. van der Laan)
e6dcfee refactor: Move GetDifficulty out of `rpc/server.h` (Wladimir J. van der Laan)
Tree-SHA512: fc2656611d18442f2fddba5ac1554d958151f6785c2039afdfc36735d7e71592d9686ff6cc7b2ad95180071d7514470e62c52d697c5a1e88f851bddaf5942edb
0fb2887 Move several relay options into the Relay help group (Jameson Lopp)
Tree-SHA512: 31fdfd8c741adb6fe6806a28955f0fbbc9360b1d8c3d8a28684794822f1b3231fffab93357357d986b81a4532c9eeabb79e5ede9378ff3ad8930ceb6588d9eb6
Mempool persistence was added in
3f78562df5, and is always on. This commit
introduces a command-line parameter -persistmempool, which defaults to
true. When set to false:
- mempool.dat is not loaded when the node starts.
- mempool.dat is not written when the node stops.
Setting minrelaytxfee to 0 will allow all transactions regardless of fee to enter your mempool until it reaches its size limit. However now that mempool limiting is governed by a separate incrementalrelay fee, it is an unnecessary restriction to prevent a minrelaytxfee of 0.
Remove -limitfreerelay and always enforce minRelayTxFee in the mempool (except from disconnected blocks)
Remove -relaypriority, the option was only used for the ability to allow free transactions to be relayed regardless of their priority. Both notions no longer apply.
7e6dcd9 random: Add fallback if getrandom syscall not available (Wladimir J. van der Laan)
7cad849 sanity: Move OS random to sanity check function (Wladimir J. van der Laan)
aa09ccb squashme: comment that NUM_OS_RANDOM_BYTES should not be changed lightly (Wladimir J. van der Laan)
224e6eb util: Specific GetOSRandom for Linux/FreeBSD/OpenBSD (Wladimir J. van der Laan)
Tree-SHA512: 9fd408b1316c69de86674f342339b2f89192fd317c8c036b5df4320f828fa263c7966146bfc1904c51137ee4a26e4cb0f560b2cd05e18cde4d808b9b92ad15c4
An effort to reduce the size of AppInitMain().
The removed code upgrades the location of the block files when
upgrading to 0.8. 0.8 seems to be the oldest version still in use.
Move the OS random test to a sanity check function that is called every
time bitcoind is initialized.
Keep `src/test/random_tests.cpp` for the case that later random tests
are added, and keep a rudimentary test that just calls the sanity check.
* Extends -dns parameter (via fNameLookup) to control these two new
parameters in addition to -addnode, -connect, and -seednode
* Moves fNameLookup assignment earlier as needed
* Changes -proxy and -onion to use Lookup() instead of LookupNumeric()
This disentangles the script validation skipping from checkpoints.
A new option is introduced "assumevalid" which specifies a block whos
ancestors we assume all have valid scriptsigs and so we do not check
them when they are also burried under the best header by two weeks
worth of work.
Unlike checkpoints this has no influence on consensus unless you set
it to a block with an invalid history. Because of this it can be
easily be updated without risk of influencing the network consensus.
This results in a massive IBD speedup.
This approach was independently recommended by Peter Todd and Luke-Jr
since POW based signature skipping (see PR#9180) does not have the
verifiable properties of a specific hash and may create bad incentives.
The downside is that, like checkpoints, the defaults bitrot and older
releases will sync slower. On the plus side users can provide their
own value here, and if they set it to something crazy all that will
happen is more time will be spend validating signatures.
Checkblocks and checklevel are also moved to the hidden debug options:
Especially now that checkblocks has a low default there is little need
to change these settings, and users frequently misunderstand them as
influencing security or IBD speed. By hiding them we offset the
space added by this new option.
032ba3f RPC help documentation for addnode peerinfo. (Gregory Maxwell)
90f13e1 Add release notes for addnode changes. (Gregory Maxwell)
50bd12c Break addnode out from the outbound connection limits. (Gregory Maxwell)
Previously addnodes were in competition with outbound connections
for access to the eight outbound slots.
One result of this is that frequently a node with several addnode
configured peers would end up connected to none of them, because
while the addnode loop was in its two minute sleep the automatic
connection logic would fill any free slots with random peers.
This is particularly unwelcome to users trying to maintain links
to specific nodes for fast block relay or purposes.
Another result is that a group of nine or more nodes which are
have addnode configured towards each other can become partitioned
from the public network.
This commit introduces a new limit of eight connections just for
addnode peers which is not subject to any of the other connection
limitations (including maxconnections).
The choice of eight is sufficient so that under no condition would
a user find themselves connected to fewer addnoded peers than
previously. It is also low enough that users who are confused
about the significance of more connections and have gotten too
copy-and-paste happy will not consume more than twice the slot
usage of a typical user.
Any additional load on the network resulting from this will likely
be offset by a reduction in users applying even more wasteful
workaround for the prior behavior.
The retry delays are reduced to avoid nodes sitting around without
their added peers up, but are still sufficient to prevent overly
aggressive repeated connections. The reduced delays also make
the system much more responsive to the addnode RPC.
Ban-disconnects are also exempted for peers added via addnode since
the outbound addnode logic ignores bans. Previously it would ban
an addnode then immediately reconnect to it.
A minor change was also made to CSemaphoreGrant so that it is
possible to re-acquire via an object whos grant was moved.
If the mempool is not completely full, treat the difference between
the maximum size and the actual usage as available for the coin cache.
This also changes the early flush trigger from (usage > 0.9 * space)
to (usage > 0.9 * space && usage > space - 100MB). This means we're not
permanently leaving 10% of the space unused when the space is large.
749be01 Move GetWarnings() into its own file. (Gregory Maxwell)
e3ba0ef Eliminate data races for strMiscWarning and fLargeWork*Found. (Gregory Maxwell)
c63198f Make QT runawayException call GetWarnings instead of directly access strMiscWarning. (Gregory Maxwell)
67dac4e Add unit tests for the CuckooCache (Jeremy Rubin)
c9e69fb Add CuckooCache implementation and replace the sigcache map_type with it (Jeremy Rubin)
SQUASHME: Change cuckoocache to only work for powers of two, to avoid mod operator
SQUASHME: Update Documentation and simplify logarithm logic
SQUASHME: OSX Build Errors
SQUASHME: minor Feedback from sipa + bluematt
SQUASHME: DOCONLY: Clarify a few comments.
76faa3c Rename the remaining main.{h,cpp} to validation.{h,cpp} (Matt Corallo)
e736772 Move network-msg-processing code out of main to its own file (Matt Corallo)
87c35f5 Remove orphan state wipe from UnloadBlockIndex. (Matt Corallo)
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
Before daemonization, just probe the data directory lock and print an
early error message if possible.
After daemonization get the data directory lock again and hold on to it until exit
This creates a slight window for a race condition to happen, however this condition is harmless: it
will at most make us exit without printing a message to console.
$ src/bitcoind -testnet -daemon
Bitcoin server starting
$ src/bitcoind -testnet -daemon
Error: Cannot obtain a lock on data directory /home/orion/.bitcoin/testnet3. Bitcoin Core is probably already running.
f5b960b Move nTimeBestReceived updating into net processing code (Matt Corallo)
d8670fb Move all calls to CheckBlockIndex out of net-processing logic (Matt Corallo)
d6ea737 Remove network state wipe from UnloadBlockIndex. (Matt Corallo)
fc0c24f Move MarkBlockAsReceived out of ProcessNewMessage (Matt Corallo)
65f35eb Move FlushStateToDisk call out of ProcessMessages::TX into ATMP (Matt Corallo)
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
a9aec5c Use BlockChecked signal to send reject messages from mapBlockSource (Matt Corallo)
7565e03 Remove SyncWithWallets wrapper function (Matt Corallo)
12ee1fe Always call UpdatedBlockTip, even if blocks were only disconnected (Matt Corallo)
f5efa28 Remove CConnman parameter from ProcessNewBlock/ActivateBestChain (Matt Corallo)
fef1010 Use CValidationInterface from chain logic to notify peer logic (Matt Corallo)
aefcb7b Move net-processing logic definitions together in main.h (Matt Corallo)
0278fb5 Remove duplicate nBlocksEstimate cmp (we already checked IsIBD()) (Matt Corallo)
87e7d72 Make validationinterface.UpdatedBlockTip more verbose (Matt Corallo)
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
Simplified version of #8278. Assumes that every OS that (a) is supported
by Bitcoin Core (b) supports daemonization has the `daemon()` function
in its C library.
- Removes the fallback path for operating systems that support
daemonization but not `daemon()`. This prevents never-exercised code from
ending up in the repository (see discussion here:
https://github.com/bitcoin/bitcoin/pull/8278#issuecomment-242704745).
- Removes the windows-specific path. Windows doesn't support `daemon()`,
so it don't support daemonization there, automatically.
Original code by Matthew King, adapted by Wladimir van der Laan.
This was broken by 63cafa6329.
Note that while this fixes the settings, it doesn't fix the actual usage of
-maxuploadtarget completely, as there is currently a bug in the
nOptimisticBytesWritten accounting that causes a delayed response if the target
is reached. That bug will be addressed separately.
In the case of (for example) an already-running bitcoind, the shutdown sequence
begins before CConnman has been created, leading to a null-pointer dereference
when g_connman->Stop() is called.
Instead, Just let the CConnman dtor take care of stopping.
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
waitfornewblock waits until a new block is received, or the timeout expires, then
returns the current block height/hash.
waitforblock waits for a specific blockhash, or until the timeout expires, then
returns the current block height/hash. If the target blockhash is the current
tip, it will return immediately.
waitforblockheight waits until the tip has reached a certain height or higher,
then returns the current height and hash.
waitforblockheight is used to avoid polling in the rpc tests.
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
9e9d644 net: fixup nits (Cory Fields)
8945384 net: Have LookupNumeric return a CService directly (Cory Fields)
21ba407 net: narrow include scope after moving to netaddress (Cory Fields)
21e5b96 net: move CNetAddr/CService/CSubNet out of netbase (Cory Fields)
1017b8a net: Add direct tests for new CSubNet constructors (Cory Fields)
b6c3ff3 net: Split resolving out of CSubNet (Cory Fields)
f96c7c4 net: Split resolving out of CService (Cory Fields)
31d6b1d net: Split resolving out of CNetAddr (Cory Fields)
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
Also cap the allocation for the leveldb-specific cache for the UTXO set
to 8MiB.
This avoids that the extra cache memory goes to the much less effective
leveldb cache instead of our application-level cache.
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
Split out methods to every module, apart from 'help' and 'stop' which
are implemented in rpcserver.cpp itself.
- This makes it easier to add or remove RPC commands - no longer everything that includes
rpcserver.h has to be rebuilt when there's a change there.
- Cleans up `rpc/server.h` by getting rid of the huge cluttered list of function definitions.
- Removes most of the bitcoin-specific code from rpcserver.cpp and .h.
Continues #7307 for the non-wallet.
The "feefilter" p2p message is used to inform other nodes of your mempool min fee which is the feerate that any new transaction must meet to be accepted to your mempool. This will allow them to filter invs to you according to this feerate.
027fdb8 When/if the copyright line does not mention Bitcoin Core developers, add a second line to copyrights in -version, About dialog, and splash screen (Luke Dashjr)
cc2095e Rewrite FormatParagraph to handle newlines within input strings correctly (Luke Dashjr)
cddffaf Bugfix: Include COPYRIGHT_HOLDERS_SUBSTITUTION in Makefile substitutions so it gets passed to extract-strings correctly (Luke Dashjr)
29598e4 Move PACKAGE_URL to configure.ac (Luke Dashjr)
78ec83d splashscreen: Resize text to fit exactly (Luke Dashjr)
3cae140 Bugfix: Actually use _COPYRIGHT_HOLDERS_SUBSTITUTION everywhere (Luke Dashjr)
4d5a3df Bugfix: gitian-descriptors: Add missing python-setuptools requirement for OS X (biplist module) (Luke Dashjr)
e4ab5e5 Bugfix: Correct copyright year in Mac DMG background image (Luke Dashjr)
917b1d0 Set copyright holders displayed in notices separately from the package name (Luke Dashjr)
c39a6ff Travis & gitian-osx: Use depends for ds_store and mac_alias modules (Luke Dashjr)
902ccde depends: Add mac_alias to depends (Luke Dashjr)
82a2d98 depends: Add ds_store to depends (Cory Fields)
de619a3 depends: Pass PYTHONPATH along to configure (Cory Fields)
e611b6e macdeploy: Use rsvg-convert rather than cairosvg (Luke Dashjr)
63bcdc5 More complicated package name substitution for Mac deployment (Luke Dashjr)
1a6c67c Parameterise 2009 in translatable copyright strings (Luke Dashjr)
d5f4683 Unify package name to as few places as possible without major changes (Luke Dashjr)
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
After discussion in #7164 I think this is better.
Max tip age was introduced in #5987 to make it possible to run
testnet-in-a-box. But associating this behavior with the testnet chain
is wrong conceptually, as it is not needed in normal usage.
Should aim to make testnet test the software as-is.
Replace it with a (debug) option `-maxtipage`, which can be
specified only in the specific case.
9af5f9c Move uiInterface.NotifyBlockTip signal above the core/wallet signal - This will keep getbestblockhash more in sync with blocknotify callbacks (Jonas Schnelli)
4082e46 [Qt] call GuessVerificationProgress synchronous during core signal, pass double over UI signal (Jonas Schnelli)
947d20b [Qt] reduce cs_main in getVerificationProgress() (Jonas Schnelli)
e6d50fc [Qt] update block tip (height and date) without locking cs_main, update always (each block) (Jonas Schnelli)
012fc91 NotifyBlockTip signal: switch from hash (uint256) to CBlockIndex* - also adds a boolean for indication if the tip update was happening during initial sync - emit notification also during initial sync (Jonas Schnelli)
a46f87f Initialize logging before we do parameter interaction (Jonas Schnelli)
df66147 Move -blocksonly parameter interaction to the new ParameterInteraction() function (Jonas Schnelli)
68354e7 [QT] Call inits parameter interaction before we create the options model (Jonas Schnelli)
411b05a Refactor parameter interaction, call it before AppInit2() (Jonas Schnelli)
1) Chainparams: Explicit CChainParams arg for main:
-AcceptBlock
-AcceptBlockHeader
-ActivateBestChain
-ConnectTip
-InitBlockIndex
-LoadExternalBlockFile
-VerifyDB parametric constructor
2) Also pickup more Params()\. in main.cpp
3) Pass nPruneAfterHeight explicitly to new FindFilesToPrune() in main.cpp
This continues/fixes #6719.
`event_base_loopbreak` was not doing what I expected it to, at least in
libevent 2.0.21.
What I expected was that it sets a timeout, given that no other pending
events it would exit in N seconds. However, what it does was delay the
event loop exit with 10 seconds, even if nothing is pending.
Solve it in a different way: give the event loop thread time to exit
out of itself, and if it doesn't, send loopbreak.
This speeds up the RPC tests a lot, each exit incurred a 10 second
overhead, with this change there should be no shutdown overhead in the
common case and up to two seconds if the event loop is blocking.
As a bonus this breaks dependency on boost::thread_group, as the HTTP
server minds its own offspring.
58ef0ff doc: update docs for Tor listening (Wladimir J. van der Laan)
68ccdc4 doc: Mention Tor listening in release notes (Wladimir J. van der Laan)
09c1ae1 torcontrol improvements and fixes (Wladimir J. van der Laan)
2f796e5 Better error message if Tor version too old (Peter Todd)
8f4e67f net: Automatically create hidden service, listen on Tor (Wladimir J. van der Laan)
- Force AUTHCOOKIE size to be 32 bytes: This provides protection against
an attack where a process pretends to be Tor and uses the cookie
authentication method to nab arbitrary files such as the
wallet
- torcontrol logging
- fix cookie auth
- add HASHEDPASSWORD auth, fix fd leak when fwrite() fails
- better error reporting when cookie file is not ok
- better init/shutdown flow
- stop advertizing service when disconnected from tor control port
- COOKIE->SAFECOOKIE auth
69d373f Don't wipe the sigcache in TestBlockValidity (Pieter Wuille)
0b9e9dc Evict sigcache entries that are seen in a block (Pieter Wuille)
830e3f3 Make sigcache faster and more efficient (Pieter Wuille)
Starting with Tor version 0.2.7.1 it is possible, through Tor's control socket
API, to create and destroy 'ephemeral' hidden services programmatically.
https://stem.torproject.org/api/control.html#stem.control.Controller.create_ephemeral_hidden_service
This means that if Tor is running (and proper authorization is available),
bitcoin automatically creates a hidden service to listen on, without user
manual configuration. This will positively affect the number of available
.onion nodes.
- When the node is started, connect to Tor through control socket
- Send `ADD_ONION` command
- First time:
- Make it create a hidden service key
- Save the key in the data directory for later usage
- Make it redirect port 8333 to the local port 8333 (or whatever port we're listening on).
- Keep control socket connection open for as long node is running. The hidden service will
(by default) automatically go away when the connection is closed.
6342a48 Init: Use DEFAULT_TRANSACTION_MINFEE in help message (MarcoFalke)
a9c73a1 [wallet] Add comments for doxygen (MarcoFalke)
6b0e622 [wallet] Refactor to use new MIN_CHANGE (MarcoFalke)
a6efc01 Bugfix: Omit wallet-related options from -help when wallet is disabled (Luke Dashjr)
5f9260f Bugfix: If genproclimit is omitted to RPC setgenerate, don't change it; also show correct default in getmininginfo (Luke Dashjr)
420a82f Bugfix: Describe dblogsize option correctly (it refers to the wallet database, not memory pool) (Luke Dashjr)
caa3d42 Bugfix: RPC: blockchain: Display correct defaults in help for verifychain method (Luke Dashjr)
Moves the call Initialize() from init.cpp to CreateWithArguments() and handles the
return value. Moves the call Shutdown() from init.cpp to destructor.
Changes Initialize() and Shutdown() to protected members.
* -maxuploadtarget can be set in MiB
* if <limit> - ( time-left-in-24h-cycle / 600 * MAX_BLOCK_SIZE ) has reach, stop serve blocks older than one week and filtered blocks
* no action if limit has reached, no guarantee that the target will not be surpassed
* add outbound limit informations to rpc getnettotals
After each transaction which is added to mempool, we first call
Expire() to remove old transactions, then throwing away the
lowest-feerate transactions.
After throwing away transactions by feerate, we set the minimum
relay fee to the maximum fee transaction-and-dependant-set we
removed, plus the default minimum relay fee.
After the next block is received, the minimum relay fee is allowed
to decrease exponentially. Its halflife defaults to 12 hours, but
is decreased to 6 hours if the mempool is smaller than half its
maximum size, and 3 hours if the mempool is smaller than a quarter
its maximum size.
The minimum -maxmempool size is 40*-limitdescendantsize, as it is
easy for an attacker to play games with the cheapest
-limitdescendantsize transactions. -maxmempool defaults to 300MB.
This disables high-priority transaction relay when the min relay
fee adjustment is >0 (ie when the mempool is full). When the relay
fee adjustment drops below the default minimum relay fee / 2 it is
set to 0 (re-enabling priority-based free relay).
(note the 9x multiplier on (void*)'s for CTxMemPool::DynamicMemoryUsage
was accidentally introduced in 5add7a7 but should have waited for this
commit which adds the extra index)
ddf98d1 Make RPC tests cope with server-side timeout between requests (Wladimir J. van der Laan)
2190ea6 rpc: Split option -rpctimeout into -rpcservertimeout and -rpcclienttimeout (Wladimir J. van der Laan)
8b2d6ed http: Disable libevent debug logging, if not explicitly enabled (Wladimir J. van der Laan)
5ce43da init: Ignore SIGPIPE (Wladimir J. van der Laan)
The two timeouts for the server and client, are essentially different:
- In the case of the server it should be a lower value to avoid clients
clogging up connection slots
- In the case of the client it should be a high value to accomedate slow
responses from the server, for example for slow queries or when the
lock is contended
Split the options into `-rpcservertimeout` and `-rpcclienttimeout` with
respective defaults of 30 and 900.
Associate with each CTxMemPoolEntry all the size/fees of descendant
mempool transactions. Sort mempool by max(feerate of entry, feerate
of descendants). Update statistics on-the-fly as transactions enter
or leave the mempool.
Also add ancestor and descendant limiting, so that transactions can
be rejected if the number or size of unconfirmed ancestors exceeds
a target, or if adding a transaction would cause some other mempool
entry to have too many (or too large) a set of unconfirmed in-
mempool descendants.
Ignore SIGPIPE on all non-win32 OSes, otherwise an unexpectedly disconnecting
RPC client will terminate the application. This problem was introduced
with the libhttp-based RPC server.
Fixes#6660.
Continues Johnathan Corgan's work.
Publishing multipart messages
Bugfix: Add missing zmq header includes
Bugfix: Adjust build system to link ZeroMQ code for Qt binaries
Lets nodes advertise that they offer bloom filter support explicitly.
The protocol version bump allows SPV nodes to assume that NODE_BLOOM is
set if NODE_NETWORK is set for pre-70011 nodes.
Also adds an option to turn bloom filter support off for nodes which
advertise a version number >= 70011. Nodes attempting to use bloom
filters on such protocol versions are banned, and a later upgade
should drop nodes of an older version which attempt to use bloom
filters.
Much code stolen from Peter Todd.
Implements BIP 111
d528025 Revert "rpc-tests: re-enable rpc-tests for Windows" (Wladimir J. van der Laan)
1e700c9 doc: update deps in build-unix.md after libevent (Wladimir J. van der Laan)
26c9b83 Move windows socket init to utility function (Wladimir J. van der Laan)
4be0b08 libevent: Windows reuseaddr workaround in depends (Cory Fields)
3a174cd Fix race condition between starting HTTP server thread and setting EventBase() (Wladimir J. van der Laan)
6d2bc22 Document options for new HTTP/RPC server in --help (Wladimir J. van der Laan)
be33f3f Implement RPCTimerHandler for Qt RPC console (Wladimir J. van der Laan)
57d85d9 doc: mention SSL support dropped for RPC in release notes (Wladimir J. van der Laan)
40b556d evhttpd implementation (Wladimir J. van der Laan)
ee2a42b tests: GET requests cannot have request body, use POST in rest.py (Wladimir J. van der Laan)
6e996d3 tests: fix qt payment test (Cory Fields)
3140ef9 build: build-system changes for libevent (Wladimir J. van der Laan)
a9af234 libevent: add depends (Cory Fields)
6a21dd5 Remove rpc_boostasiotocnetaddr test (Wladimir J. van der Laan)
8f9301c qa: Remove -rpckeepalive tests from httpbasics (Wladimir J. van der Laan)
51fcfc0 doc: remove documentation for rpcssl (Wladimir J. van der Laan)
Split StartHTTPServer into InitHTTPServer and StartHTTPServer to give
clients a window to register their handlers without race conditions.
Thanks @ajweiss for figuring this out.
- *Replace usage of boost::asio with [libevent2](http://libevent.org/)*.
boost::asio is not part of C++11, so unlike other boost there is no
forwards-compatibility reason to stick with it. Together with #4738 (convert
json_spirit to UniValue), this rids Bitcoin Core of the worst offenders with
regard to compile-time slowness.
- *Replace spit-and-duct-tape http server with evhttp*. Front-end http handling
is handled by libevent, a work queue (with configurable depth and parallelism)
is used to handle application requests.
- *Wrap HTTP request in C++ class*; this makes the application code mostly
HTTP-server-neutral
- *Refactor RPC to move all http-specific code to a separate file*.
Theoreticaly this can allow building without HTTP server but with another RPC
backend, e.g. Qt's debug console (currently not implemented) or future RPC
mechanisms people may want to use.
- *HTTP dispatch mechanism*; services (e.g., RPC, REST) register which URL
paths they want to handle.
By using a proven, high-performance asynchronous networking library (also used
by Tor) and HTTP server, problems such as #5674, #5655, #344 should be avoided.
What works? bitcoind, bitcoin-cli, bitcoin-qt. Unit tests and RPC/REST tests
pass. The aim for now is everything but SSL support.
Configuration options:
- `-rpcthreads`: repurposed as "number of work handler threads". Still
defaults to 4.
- `-rpcworkqueue`: maximum depth of work queue. When this is reached, new
requests will return a 500 Internal Error.
- `-rpctimeout`: inactivity time, in seconds, after which to disconnect a
client.
- `-debug=http`: low-level http activity logging
Move mempool rejections to debug category `mempoolrej`, to make it possible
to show them without enabling the entire category `mempool` which is
high volume.
7b79cbd limit total length of user agent comments (Pavol Rusnak)
557f8ea implement uacomment config parameter which can add comments to user agent as per BIP-0014 (Pavol Rusnak)
Previously various user-facing strings have used inconsistent currency units "BTC",
"btc" and "bitcoins". This adds a single constant and uses it for each reference to
the currency unit.
Also adds a description of the unit for --maxtxfee, and adds the missing "amount"
field description to the (deprecated) move RPC command.
Fixes#2007
This checks to see if the system clock appears to be bad and gives a
helpful error message. If the user's clock is set incorrectly, hopefully
they'll abort, fix it, and then save themselves a fruitless resync.
Introduce a PlatformStyle to handle platform-specific customization of
the UI.
This replaces 'scicon', as well as #ifdefs to determine whether to place
icons on buttons.
The selected PlatformStyle defaults to the platform that the application
was compiled on, but can be overridden from the command line with
`-uiplatform=<x>`.
Also fixes the warning from #6328.
Prevents stomping on debug logs in datadirs that are locked by other
instances and lost parameter interaction messages that can get wiped by
ShrinkDebugFile().
The log is now opened explicitly and all emitted messages are buffered
until this open occurs. The version message and log cut have also been
moved to the earliest possible sensible location.
To determine the default for `-par`, the number of script verification
threads, use [boost:🧵:physical_concurrency()](http://www.boost.org/doc/libs/1_58_0/doc/html/thread/thread_management.html#thread.thread_management.thread.physical_concurrency)
which counts only physical cores, not virtual cores.
Virtual cores are roughly a set of cached registers to avoid context
switches while threading, they cannot actually perform work, so spawning
a verification thread for them could even reduce efficiency and will put
undue load on the system.
Should fix issue #6358, as well as some other reported system overload
issues, especially on Intel processors.
The function was only introduced in boost 1.56, so provide a utility
function `GetNumCores` to fall back for older Boost versions.
New, undocumented-on-purpose -mocktime=timestamp command-line
argument to startup with mocktime set. Needed because
time-related blockchain sanity checks are done on startup, before a
test has a chance to make a setmocktime RPC call.
And changed the setmocktime RPC call so calling it will not result in
currently connected peers being disconnected due to inactivity timeouts.
Make it possible to opt-out of the centralized alert system by providing
an option `-noalerts` or `-alerts=0`. The default remains unchanged.
This is a gentler form of #6260, in which I went a bit overboard by
removing the alert system completely.
I intend to add this to the GUI options in another pull after this.
This sets aside a number of connection slots for whitelisted peers,
useful for ensuring your local users and miners can always get in,
even if your limit on inbound connections has already been reached.
Simplify and make the code in AppInit2 more clear.
This provides a straightforward flow, gets rid of .count() (which makes
it possible to override an earlier provided proxy option to nothing), as
well as comments the different cases.
Do not translate -help-debug options, Many technical terms, and
only a very small audience, so is unnecessary stress to translators.
Brings the code up to date with translation string policy in
`doc/translation_strings_policy.md`.
Also remove no-longer-relevant "In this mode -genproclimit controls how
many blocks are generated immediately." (as of #5957) from regtest help.
The partition checking code was using chainActive timestamps
to detect partitioning; with headers-first syncing, it should use
(and with this pull request, does use) pIndexBestHeader timestamps.
Fixes issue #6251
In some corner cases, it may be possible for recent blocks to end up in
the same block file as much older blocks. Previously, the pruning code
would stop looking for files to remove upon first encountering a file
containing a block that cannot be pruned, now it will keep looking for
candidate files until the target is met and all other criteria are
satisfied.
This can result in a noncontiguous set of block files (by number) on
disk, which is fine except for during some reindex corner cases, so
make reindex preparation smarter such that we keep the data we can
actually use and throw away the rest. This allows pruning to work
correctly while downloading any blocks needed during the reindex.
aa41bc8 Update help message to match the #4219 change (lpescher)
f60bb5e Update documentation to match the #4219 change (lpescher)
cb87386 Make command line option to show all debugging consistent with similar options (lpescher)
To protect privacy, do not use UPNP when a proxy is set. The user may
still specify -listen=1 to listen locally (for a hidden service), so
don't rely on this happening through -listen.
Fixes#2927.
86a5f4b Relocate calls to CheckDiskSpace (Alex Morcos)
67708ac Write block index more frequently than cache flushes (Pieter Wuille)
b3ed423 Cache tweak and logging improvements (Pieter Wuille)
fc684ad Use accurate memory for flushing decisions (Pieter Wuille)
046392d Keep track of memory usage in CCoinsViewCache (Pieter Wuille)
540629c Add memusage.h (Pieter Wuille)
Create a monitoring task that counts how many blocks have been found in the last four hours.
If very few or too many have been found, an alert is triggered.
"Very few" and "too many" are set based on a false positive rate of once every fifty years of constant running with constant hashing power, which works out to getting 5 or fewer or 48 or more blocks in four hours (instead of the average of 24).
Only one alert per day is triggered, so if you get disconnected from the network (or are being Sybil'ed) -alertnotify will be triggered after 3.5 hours but you won't get another -alertnotify for 24 hours.
Tested with a new unit test and by running on the main network with -debug=partitioncheck
Run test/test_bitcoin --log_level=message to see the alert messages:
WARNING: check your network connection, 3 blocks received in the last 4 hours (24 expected)
WARNING: abnormally high number of blocks generated, 60 blocks received in the last 4 hours (24 expected)
The -debug=partitioncheck debug.log messages look like:
ThreadPartitionCheck : Found 22 blocks in the last 4 hours
ThreadPartitionCheck : likelihood: 0.0777702
Instead of only checking height to decide whether to disable script checks,
actually check whether a block is an ancestor of a checkpoint, up to which
headers have been validated. This means that we don't have to prevent
accepting a side branch anymore - it will be safe, just less fast to
do.
We still need to prevent being fed a multitude of low-difficulty headers
filling up our memory. The mechanism for that is unchanged for now: once
a checkpoint is reached with headers, no headers chain branching off before
that point are allowed anymore.
a8cdaf5 checkpoints: move the checkpoints enable boolean into main (Cory Fields)
11982d3 checkpoints: Decouple checkpoints from Params (Cory Fields)
6996823 checkpoints: make checkpoints a member of CChainParams (Cory Fields)
9f13a10 checkpoints: store mapCheckpoints in CCheckpointData rather than a pointer (Cory Fields)
Connecting the chain can take quite a while.
All the while it is still showing `Loading wallet...`.
Add an init message to inform the user what is happening.
libsecp256k1's API changed, so update key.cpp to use it.
Libsecp256k1 now has explicit context objects, which makes it completely thread-safe.
In turn, keep an explicit context object in key.cpp, which is explicitly initialized
destroyed. This is not really pretty now, but it's more efficient than the static
initialized object in key.cpp (which made for example bitcoin-tx slow, as for most of
its calls, libsecp256k1 wasn't actually needed).
This also brings in the new blinding support in libsecp256k1. By passing in a random
seed, temporary variables during the elliptic curve computations are altered, in such
a way that if an attacker does not know the blind, observing the internal operations
leaks less information about the keys used. This was implemented by Greg Maxwell.
This adds a -prune=N option to bitcoind, which if set to N>0 will enable block
file pruning. When pruning is enabled, block and undo files will be deleted to
try to keep total space used by those files to below the prune target (N, in
MB) specified by the user, subject to some constraints:
- The last 288 blocks on the main chain are always kept (MIN_BLOCKS_TO_KEEP),
- N must be at least 550MB (chosen as a value for the target that could
reasonably be met, with some assumptions about block sizes, orphan rates,
etc; see comment in main.h),
- No blocks are pruned until chainActive is at least 100,000 blocks long (on
mainnet; defined separately for mainnet, testnet, and regtest in chainparams
as nPruneAfterHeight).
This unsets NODE_NETWORK if pruning is enabled.
Also included is an RPC test for pruning (pruning.py).
Thanks to @rdponticelli for earlier work on this feature; this is based in
part off that work.
According to Tor's extensions to the SOCKS protocol
(https://gitweb.torproject.org/torspec.git/tree/socks-extensions.txt)
it is possible to perform stream isolation by providing authentication
to the proxy. Each set of credentials will create a new circuit,
which makes it harder to correlate connections.
This patch adds an option, `-proxyrandomize` (on by default) that randomizes
credentials for every outgoing connection, thus creating a new circuit.
2015-03-16 15:29:59 SOCKS5 Sending proxy authentication 3842137544:3256031132
This is an advanced feature which will disable any kind of automatic
transaction broadcasting in the wallet. This gives the user full control
of how the transaction is sent.
For example they can broadcast new transactions through some other
mechanism themselves, after getting the transaction hex through `gettransaction`.
This just adds the option `-walletbroadcast=<0,1>`. Right now these
transactions will get the status
Status: conflicted, has not been successfully broadcast yet
They shouldn't be shown as conflicted at all (`walletconflicts` is empty). This status
will go away when the transaction is received through the network.
This adds a -checkblockindex (defaulting to true for regtest), which occasionally
does a full consistency check for mapBlockIndex, setBlockIndexCandidates, chainActive, and
mapBlocksUnlinked.
. Closes the bug from commit e179eb3d9b
("bitcoin-qt -help" did not show any message)
. Move all the options in init.cpp (there were already some
options related to bitcoin-qt)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format works even if the translation of the strings
modifies the lenght of the message.
Sqashed 6 commits in a single one.
Help messages correctly formatted for SVGA text mode (132 chars)
Help messages are formatted programmatically with FormatParagraph
in order not to break existing strings in Transifex.
The new format should work even if the translation of the strings
modifies the lenght of the message.
Fix - syntax error
Correct formatting for 79 chars
Correctly based on C++ functions
Removed spare spaces from option strings
Fix - syntax error
Rebased by @laanwj:
- update for RPC methods added since 84d13ee: setmocktime,
invalidateblock, reconsiderblock. Only the first, setmocktime, required a change,
the other two are thread safe.
This avoids a regression for issues like #334 where high speed
repeated connections eventually run the HTTP client out of
sockets because all of theirs end up in time_wait.
Maybe the trade-off here is suboptimal, but if both choices will
fail then we prefer fewer changes until the root cause is solved.
It turns out that some miners have been staying with old versions of
Bitcoin Core because their software behaves poorly with persistent
connections and the Bitcoin Core thread and connection limits.
What happens is that underlying HTTP libraries leave connections open
invisibly to their users and then the user runs into the default four
thread limit. This looks like Bitcoin Core is unresponsive to RPC.
There are many things that should be improved in Bitcoin Core's behavior
here, e.g. supporting more concurrent connections, not tying up threads
for idle connections, disconnecting kept-alive connections when limits
are reached, etc. All are fairly big, risky changes.
Disabling keep-alive is a simple workaround. It's often not easy to turn
off the keep-alive support in the client where it may be buried in some
platform library.
If you are one of the few who really needs persistent connections you
probably know that you want them and can find a switch; while if you
don't and the misbehavior is hitting you it is hard to discover the
source of your problems is keepalive related. Given that it is best
to default to off until they're handled better.
Previously the minRelayTxFee was only enforced on user specified values.
It was possible for smartfee to produce a fee below minRelayTxFee which
would just result in the transaction getting stuck because it can't be
relayed.
This also introduces a maxtxfee option which sets an absolute maximum
for any fee created by the wallet, with an intention of increasing
user confidence that the automatic fees won't burn them. This was
frequently a concern even before smartfees.
If the configured fee policy won't even allow the wallet to meet the relay
fee the transaction creation may be aborted.
There are 3 pieces of data that are maintained on disk. The actual block
and undo data, the block index (which can refer to positions on disk),
and the chainstate (which refers to the best block hash).
Earlier, there was no guarantee that blocks were written to disk before
block index entries referring to them were written. This commit introduces
dirty flags for block index data, and delays writing entries until the actual
block data is flushed.
With this stricter ordering in writes, it is now safe to not always flush
after every block, so there is no need for the IsInitialBlockDownload()
check there - instead we just write whenever enough time has passed or
the cache size grows too large. Also updating the wallet's best known block
is delayed until this is done, otherwise the wallet may end up referring to an
unknown block.
In addition, only do a write inside the block processing loop if necessary
(because of cache size exceeded). Otherwise, move the writing to a point
after processing is done, after relaying.
Previously -proxy was not setting the proxy for IsLimited networks, so
if you set your configuration to be onlynet=tor you wouldn't get an
IPv4 proxy set.
The payment protocol gets its proxy configuration from the IPv4 proxy,
and so it would experience a connection leak.
This addresses issue #5355 and also clears up a cosmetic bug where
getinfo proxy output shows nothing when onlynet=tor is set.
- use __func__ instead of hard-coded function name for logging
- update -discover help message to reflect newly added parameter
interaction
- use DEFAULT_LISTEN in a parameter interaction check instead a hard coded
value
This is a simplified re-do of closed pull #3088.
This patch eliminates the privacy and reliability problematic use
of centralized web services for discovering the node's addresses
for advertisement.
The Bitcoin protocol already allows your peers to tell you what
IP they think you have, but this data isn't trustworthy since
they could lie. So the challenge is using it without creating a
DOS vector.
To accomplish this we adopt an approach similar to the one used
by P2Pool: If we're announcing and don't have a better address
discovered (e.g. via UPNP) or configured we just announce to
each peer the address that peer told us. Since peers could
already replace, forge, or drop our address messages this cannot
create a new vulnerability... but if even one of our peers is
giving us a good address we'll eventually make a useful
advertisement.
We also may randomly use the peer-provided address for the
daily rebroadcast even if we otherwise have a seemingly routable
address, just in case we've been misconfigured (e.g. by UPNP).
To avoid privacy problems, we only do these things if discovery
is enabled.
This is less surprising.
Avoids the overload-the-CPU default of using N threads for script
verification as well as N threads for generation where N is number of cores.
Start the RPC server before doing all the (expensive) startup
initialisations like loading the block index. Until the node is ready,
return all calls immediately with a new error signalling "in warmup"
with an appropriate status message (similar to the init message).
This is useful for RPC clients to know that the server is there (e. g.,
they don't have to start it) but not yet available. It is used in
Namecoin and Huntercoin already for some time, and there exists a UI
hooked onto the RPC interface that actively uses this to its advantage.
a873823 CAutoFile: Explicit Get() and remove unused methods (Wladimir J. van der Laan)
fef24ca Add IsNull() to class CAutoFile and remove operator ! (Ruben Dario Ponticeli)
c0195b1 Bugfix: Remove default from -zapwallettxes description (inaccurate) (Luke Dashjr)
0a08aa8 Parameterise command line option defaults, so translations are independent of them (Luke Dashjr)
Previous refactorings broke the ability to rebuild the chainstate by deleting the chainstate
directory, resulting in an incorrect "Incorrect or no genesis block found" error message. Fix
that.
Also, improve the performance of ActivateBestBlockStep by using the skiplist to only discover
a few potential blocks to connect at a time, instead of all blocks forever - as we likely bail
out after connecting a single one anyway.
7c70438 Get rid of the dummy CCoinsViewCache constructor arg (Pieter Wuille)
ed27e53 Add coins_tests with a large randomized CCoinViewCache test. (Pieter Wuille)
058b08c Do not keep fully spent but unwritten CCoins entries cached. (Pieter Wuille)
c9d1a81 Get rid of CCoinsView's SetCoins and SetBestBlock. (Pieter Wuille)
f28aec0 Use ModifyCoins instead of mutable GetCoins. (Pieter Wuille)
