e71b656f31 qt: Align layout of checkboxes (Hennadii Stepanov)
Pull request description:
From https://github.com/bitcoin/bitcoin/issues/20555#issuecomment-747742627:
> 0.21.0rc3 compiled from source, Ubuntu 20.04 + i3: tested mainnet, testnet, and signet. created a descriptor wallet in qt, tested torv3 with addnode, and checked if anchors.dat is created on shutdown and removed on startup.
>
> I've noticed the "Advanced options" label being cut-off in the wallet creation dialog.
This PR should fix this issue.
ACKs for top commit:
MarcoFalke:
review ACK e71b656f31
Tree-SHA512: dcc997a440a96fc936296323afaf9f4040ac06cf5ad32724a88c2e2e16c726c35b1b2bacbb3e081839d8a69b5a6086b2570d6b2e98976f29b5427db2d434eee9
fae32f295c wallet: Add missing check for -descriptors wallet tool option (MarcoFalke)
faf8f61368 test: Add missing check for is_sqlite_compiled (MarcoFalke)
fa7dde1c41 wallet: Pass ArgsManager into ExecuteWalletToolFunc instead of using global (MarcoFalke)
Pull request description:
Also, fix a test failure when compiled without sqlite
ACKs for top commit:
ryanofsky:
Code review ACK fae32f295c. Thanks for implementing the -descriptors check and dealing with the test failure!
jonatack:
Code review utACK fae32f295c
Tree-SHA512: 3d7710694085822739a8316e4abc6db270799ca6ff6b0f9e5563ae240da65ae6a9cab7ba2647feae6ba540dac40b55b38ed41c8f6ed0bf02a3d1536284448927
23cac24dd3 tests: Test bitcoin-wallet dump and createfromdump (Andrew Chow)
a88c320041 wallettool: Add createfromdump command (Andrew Chow)
e1e7a90d5f wallettool: Add dump command (Andrew Chow)
Pull request description:
Adds two commands to the `bitcoin-wallet` tool: `dump` and `createfromdump`. These commands will be useful for a wallet storage migration in the future. It is also generally useful to have a storage agnostic dump like this. These commands are similar to BDB's `db_dump` and `db_load` tools. This can also be useful for manual construction of a wallet file for tests.
`dump` outputs every key-value pair from the wallet as comma separated hex. Each key-value pair is on its own line with the key and value in hex separated by a comma. This is output to the file specified by the new `-dumpfile` option.
`createfromdump` takes a file produced by `dump` and creates a new wallet file with exactly the records specified in that file.
A new option `-dumpfile` is added to the wallet tool. When used with `dump`, the records will be written to the specified file. When used with `createfromdump`, the file is read and the key-value pairs constructed from it. `createfromdump` requires `-dumpfile`.
A simple round-trip test is added to the `tool_wallet.py`.
This PR is based on #19334,
ACKs for top commit:
Sjors:
re-utACK 23cac24
MarcoFalke:
re review ACK 23cac24dd3 only change is rebase and removing useless shared_ptr wrapper 🎼
ryanofsky:
Code review ACK 23cac24dd3. Only changes since last review rebase and changing a pointer to a reference
Tree-SHA512: 2d63cf62baca3d16495aa698dc02f7d889c81b41015e9c92c23c275bb4a690fc176d351c3fd7f310bd6b17f5a936cc9be694cbecd702af741b96c0f530e72fa2
cc3044ccdb fix misleading comment about call to non-existing function (pox)
Pull request description:
The comment seems to be describing the subsequent call to `SyncTransaction` but refers to it as `SyncNotifications`, which is not any function currently in the codebase.
It's best to just remove the "what" aspect of the comment and focus on the "why", which also reduces the risk of similar documentation errors in the future, in case the function ever gets renamed, for example.
ACKs for top commit:
laanwj:
ACK cc3044ccdb
Tree-SHA512: 882ff17836ef585a603dc504f3dd21f56f682e49b28a0998f23fd16025826fbb083b7978db3ee70d0e0ff2c86fd6c3fd99a2361e5d45c765fdc5822c5f14c0a7
010eed3ce0 doc: warn that incoming conns are unlikely when not using default ports (Adam Jonas)
Pull request description:
Closes#5150.
This was mostly copied from #5285 by sulks, who has since quit GitHub.
The issue has remained open for 6 years, but the extra explanation still seems useful.
ACKs for top commit:
laanwj:
re-ACK 010eed3ce0
Tree-SHA512: d240fb06bba41ad8898ced59356c10adefc09f3abb33e277f8e2c5980b40678f2d237f286b476451bb29d2b94032a7dee2ada3b2efe004ed1c2509e70b48e40f
0c41c10830 doc: Remove shouty enums in net_processing comments (Suhas Daftuar)
Pull request description:
This uses the `CNode::ConnectionTypeAsString()` strings in place of the all-caps enums in a couple of comments in `net_processing`, as suggested by ajtowns in https://github.com/bitcoin/bitcoin/pull/19858#discussion_r540821050.
ACKs for top commit:
practicalswift:
ACK 0c41c10830
jnewbery:
ACK 0c41c10830
laanwj:
ACK 0c41c10830
Tree-SHA512: c8ab905e151ebb144c3f878277dc59d77591e4b39632658407b69b80b80d65825d5a391b01e2aea6af2fdf174c143dfe7d2f3eba84a020a58d7926458fdcd0a5
198fff88f3 GUI: Define MAX_DIGITS_BTC for magic number in BitcoinUnits::format (Luke Dashjr)
Pull request description:
A magic number snuck in with https://github.com/bitcoin/bitcoin/pull/16432
ACKs for top commit:
hebasto:
ACK 198fff88f3, I have reviewed the code and it looks OK, I agree it can be merged.
kristapsk:
utACK 198fff88f3
Tree-SHA512: 78dc23c2ae61bac41e5e34eebf57274599cb2ebb0b18d46e8a3228d42b256a1bc9bb17091c748f0f692ef1c4c241cfbd3e30a12bcd12222a234c1a9547ebe786
5021810650 Make CanFlushToDisk a const member function (practicalswift)
281cf99554 Do not run functions with necessary side-effects in assert() (practicalswift)
Pull request description:
Do not run functions with necessary side-effects in `assert()`.
ACKs for top commit:
laanwj:
Code review ACK 5021810650
sipa:
utACK 5021810650
theStack:
Code Review ACK 5021810650🟢
Tree-SHA512: 38b7faccc2f16a499f9b7b1b962b49eb58580b2a2bbf63ea49dcc418a5ecc8f21a0972fa953f66db9509c7239af67cfa2f9266423fd220963d091034d7332b96
ea36a453e3 [net] Make p2p recv buffer timeout 20 minutes for all peers (John Newbery)
Pull request description:
The timeout interval for the send and recv buffers was changed from 90
minutes to 20 minutes in commit f1920e86 in 2013, except for peers that
did not support the pong message (where the recv buffer timeout remained
at 90 minutes). A few observations:
- for peers that support BIP 31 (pong messages), this recv buffer
timeout is almost redundant with the ping timeout. We send a ping
message every two minutes, and set a timeout of twenty minutes to
receive the pong response. If the recv buffer was really timing out,
then the pong response would also time out.
- BIP 31 is supported by all nodes of p2p version 60000 and higher, and
has been in widespread use since 2013. I'd be very surprised if there
are many nodes on the network that don't support pong messages.
- The recv buffer timeout is not specified in any p2p BIP. We're free to
set it at any value we want.
- A peer that doesn't support BIP 31 and hasn't sent any message to us
at all in 90 minutes is unlikely to be useful for us, and is more likely
to be evicted AttemptToEvictConnection() since it'll have the worst
possible ping time and isn't providing blocks/transactions.
Therefore, we remove this check, and set the recv buffer timeout to 20
minutes for all peers. This removes the final p2p version dependent
logic from the net layer, so all p2p version data can move into the
net_processing layer.
Alternative approaches:
- Set the recv buffer timeout to 90 minutes for all peers. This almost
wouldn't be a behaviour change at all (pre-BIP 31 peers would still
have the same recv buffer timeout, and we can't ever reach a recv buffer
timeout higher than 21 minutes for post-BIP31 peers, because the pong
timeout would be hit first).
- Stop supporting peers that don't support BIP 31. BIP 31 has been in
use since 2012, and implementing it is trivial.
ACKs for top commit:
MarcoFalke:
review ACK ea36a453e3
promag:
Code review ACK ea36a453e3.
practicalswift:
cr ACK ea36a453e3: patch looks correct
ajtowns:
ACK ea36a453e3
sipa:
utACK ea36a453e3
jonatack:
Code review ACK ea36a453e3
Tree-SHA512: df290bb32d2b5d9e59a0125bb215baa92787f9d01542a7437245f1c478c7f9b9831e5f170d3cd0db2811e1b11b857b3e8b2e03376476b8302148e480d81aab19
89895773b7 Fix length of R check in test/key_tests.cpp:key_signature_tests (Dmitry Petukhov)
Pull request description:
The code before the fix only checked the length of R value of the last
signature in the loop, and only for equality (but the length can be
less than 32)
The fixed code checks that length of the R value is less than or equal
to 32 on each iteration of the loop
ACKs for top commit:
laanwj:
ACK 89895773b7
Tree-SHA512: 73eb2bb4a6c1c5fc11dd16851b28b43037ac06ef8cfc3b1f957429a1fca295c9422d67ec6c73c0e4bb4919f92e22dc5d733e84840b0d01ad1a529aa20d906ebf
37fe80e626 Only consider addrv2 peers for relay of non-addrv1 addresses (Pieter Wuille)
83f8821a6f refactor: add IsAddrCompatible() to CNode (Pieter Wuille)
Pull request description:
When selecting peers to relay an address to, only pick addrv2-capable ones if the address cannot be represented in addr(v1).
Without this I expect that propagation of torv3 addresses over the cleartext network will be very hard for a while.
ACKs for top commit:
jonatack:
ACK 37fe80e626
vasild:
ACK 37fe80e626
Tree-SHA512: 18a854ea43ad473cf89b9c5193b524109d7af75c26f7aa7e26cd72ad0db52f19c8001d566c607a7e6772bc314f770f09b6c3e07282d110c5daea193edc592cd2
173cc9b7be test: walettool create descriptors (Ivan Metlushko)
345e88eecf wallettool: add param to create descriptors wallet (Ivan Metlushko)
6d3af3ab62 wallettool: pass in DatabaseOptions into MakeWallet (Ivan Metlushko)
Pull request description:
Rationale: expose and promote descriptor wallets in more places; make cli tool more consistent with `createwallet` rpc.
Add `-descriptors` parameter which is off by default. When specified it will create a new descriptors wallet with sqlite backend, which is consistent with `createwallet` rpc.
This PR is based on a suggestion from **ryanofsky** https://github.com/bitcoin/bitcoin/pull/19137#discussion_r516779603
Example:
```
$ ./src/bitcoin-wallet -wallet=fewty -descriptors create
Topping up keypool...
Wallet info
===========
Name: fewty
Format: sqlite
Descriptors: yes
Encrypted: no
HD (hd seed available): yes
Keypool Size: 6000
Transactions: 0
Address Book: 0
```
```
$ ./src/bitcoin-wallet -wallet=fewty create
Topping up keypool...
Wallet info
===========
Name: fewty
Format: bdb
Descriptors: no
Encrypted: no
HD (hd seed available): yes
Keypool Size: 2000
Transactions: 0
Address Book: 0
```
ACKs for top commit:
achow101:
ACK 173cc9b7be
ryanofsky:
Code review ACK 173cc9b7be. This seems pretty nicely implemented now, with opportunities to clean up more and dedup later
MarcoFalke:
Concept ACK 173cc9b7be🌠
Tree-SHA512: cc32ba336ff709de2707ee15f495b4617908e8700ede8401a58e894f44cda485c544d644023c9a6604d88a62db9d92152383ee2e8abf691688c25cf6e222c622
cd03513dc2 init: Signal-safe instant shutdown (Wladimir J. van der Laan)
Pull request description:
Replace the 200ms polling loop with a faster and more efficient waiting operation. This should speed up short RPC tests.
This change has been tried a few times before, but abandoned every time because solutions used a condition variable which is not safe for use in signals, as they need to be reentrant.
On UNIX-ish OSes, use a safe way: a pipe. When shutdown is requested write a dummy byte to the pipe. Waiting for shutdown is a matter of a blocking read from the pipe.
On Windows, there are no signals so using a condition variable is safe.
This only affects bitcoind. The GUI is unaffected by this change, and keeps polling as before in `BitcoinGUI::detectShutdown()`. It might be possible to listen to a pipe there, too, but I'm not sure, and it's complicated by the GUI-node abstraction.
ACKs for top commit:
jonatack:
ACK cd03513dc2 tested on Debian 5.9.11-1 (2020-11-27) x86_64 GNU/Linux
Tree-SHA512: ed2f532f69fec4855c17bf7b8f3d0eb96e78ee2a3c13d374dd2c6add06e3ad6a190da8ed8f9d7a76532cf998222d67f57e35b206aec29675e96437448ae7e13c
fade6195b1 Move TX_MAX_STANDARD_VERSION to policy (MarcoFalke)
Pull request description:
`primitives` should only be used for the raw datastructures (parsing and format). It is not the right place to document relay policy.
ACKs for top commit:
laanwj:
Code review ACK fade6195b1
lontivero:
Concept ACK fade6195b1
Tree-SHA512: f809c4aecd14d7e9feaa7b50b9c0697232991eef36190cd960bcfb0ad6e20c71a4f6aab48c7747cf8a681eb14feda60c55b09a37f128673d519567224f29cd97
3e6657a14d Move signet onion seed from v2 to v3 (Sjors Provoost)
Pull request description:
Since v0.21 hidden services use the longer v3 address format.
It may make sense to backport this to the v0.21 branch, although onion nodes can always use the non-onion seeds.
ACKs for top commit:
MarcoFalke:
Concept ACK 3e6657a14d
laanwj:
ACK 3e6657a14d
Saibato:
tACK 3e6657a14d👍
Tree-SHA512: 9bb4d82345ab25d6ea971f8f106c30778ade2ba11a292e8d7449ea39581b91e51c4b34851b5c06f5dfbe07e7b04e5dc92c48c98c47a1c7ef3d5f350c3a3ad4f7
fa13e1b0c5 build: Add option --enable-danger-fuzz-link-all (MarcoFalke)
44444ba759 fuzz: Link all targets once (MarcoFalke)
Pull request description:
Currently the linker is invoked more than 150 times when compiling with `--enable-fuzz`. This is problematic for several reasons:
* It wastes disk space north of 20 GB, as all libraries and sanitizers are linked more than 150 times
* It wastes CPU time, as the link step can practically not be cached (similar to ccache for object files)
* It makes it a blocker to compile the fuzz tests by default for non-fuzz builds #19388, for the aforementioned reasons
* The build file is several thousand lines of code, without doing anything meaningful except listing each fuzz target in a highly verbose manner
* It makes writing new fuzz tests unnecessarily hard, as build system knowledge is required; Compare that to boost unit tests, which can be added by simply editing an existing cpp file
* It encourages fuzz tests that re-use the `buffer` or assume the `buffer` to be concatenations of seeds, which increases complexity of seeds and complexity for the fuzz engine to explore; Thus reducing the effectiveness of the affected fuzz targets
Fixes#20088
ACKs for top commit:
practicalswift:
Tested ACK fa13e1b0c5
sipa:
ACK fa13e1b0c5. Reviewed the code changes, and tested the 3 different test_runner.py modes (run once, merge, generate). I also tested building with the new --enable-danger-fuzz-link-all
Tree-SHA512: 962ab33269ebd51810924c51266ecc62edd6ddf2fcd9a8c359ed906766f58c3f73c223f8d3cc49f2c60f0053f65e8bdd86ce9c19e673f8c2b3cd676e913f2642
fa86217e97 doc: Move add relay comment in net to correct place (MarcoFalke)
Pull request description:
The comment was previously attached to `m_addr_known`, but now it is attached to `id`, which is wrong.
Fix that by moving the comment to `RelayAddrsWithConn`.
ACKs for top commit:
practicalswift:
cr ACK fa86217e97: patch looks correct
jnewbery:
ACK fa86217e97
theStack:
Code review ACK fa86217e97🌳
Tree-SHA512: ec3d5f1996aded38947d2a5fd0bb63539e88f83964cd3254984002edfd51abb4dde813c7c81619a8a3a5c55b7e9ae83c8c5be8ad6c84b4593ed3bbf463fe8979
f7264fff0a Check if Cjdns address is valid (Lucas Ontivero)
Pull request description:
CJDNS addresses start with 0xFC and for that reason if a netaddr was unserialized with network type cjdns but its address prefix is not 0xFC then that netaddr should be considered invalid.
ACKs for top commit:
jonatack:
ACK f7264fff0a
practicalswift:
cr ACK f7264fff0a: patch looks correct
theStack:
ACK f7264fff0a✔️
Tree-SHA512: 5300df2ffbbd69c40271b6d8df96cca98eb3e1ee76aba62c9c76025d083788ab1f1332775890c63b06e02ca593863a867cd53956bce5962383e8450487898669
Replace the 200ms polling loop with a faster and more efficient waiting
operation.
This was tried a few times before, but given up every time because
solutions use a condition variable which is not safe for use in signals
as they need to be reentrant.
On UNIX-ish OSes, use a safe way: a pipe. When shutdown is requested
write a dummy byte to the pipe. Waiting for shutdown is a matter of a
blocking read from the pipe.
On Windows, there are no signals so using a condition variable is safe.
8c09c0c1d1 fuzz: Avoid time-based "non-determinism" in fuzzing harnesses by using mocked GetTime() (practicalswift)
Pull request description:
Avoid time-based "non-determinism" in fuzzing harnesses by using mocked `GetTime()`.
Prior to this commit the fuzzing harnesses `banman`, `connman`, `net` and `rbf` had time-based "non-determinism". `addrman` is fixed in #20425. `process_message` and `process_messages` are left to fix: simply using mock time is not enough for them due to interaction with `IsInitialBlockDownload()`.
See [`doc/fuzzing.md`](https://github.com/bitcoin/bitcoin/blob/master/doc/fuzzing.md) for information on how to fuzz Bitcoin Core. Don't forget to contribute any coverage increasing inputs you find to the [Bitcoin Core fuzzing corpus repo](https://github.com/bitcoin-core/qa-assets).
Happy fuzzing :)
ACKs for top commit:
MarcoFalke:
review ACK 8c09c0c1d1
practicalswift:
> review ACK [8c09c0c](8c09c0c1d1)
Tree-SHA512: 32dfbead3dfd18cf4ff56dc2ea341aa977441b4e19a54879cf54fa5820c7e2b14b92c7e238d32fd785654f3b28cc82826ae66c03e94c292633c63c41196ba9a8
0475c8ba4d net: use std::chrono throughout maxOutbound logic (fanquake)
f805933e70 init: set nMaxOutboundLimit connection option directly (fanquake)
173d0d35f1 net: remove nMaxOutboundTimeframe from connection options (fanquake)
b117eb1486 net: remove SetMaxOutboundTimeframe (fanquake)
2f3f1aec1f net: remove SetMaxOutboundTarget (fanquake)
Pull request description:
Switch to using `std::chrono` types for the max outbound related logic.
Removes some unnecessary code from init.
ACKs for top commit:
jnewbery:
utACK 0475c8ba4d
MarcoFalke:
review ACK 0475c8ba4d🎭
Tree-SHA512: 5a6d5b61e0d4c08a235cfc0257dae65d09a5df019d8d230b1a58a3e2483ddf4a31efdefc885c4a02e4715e4180b0ed92ebc0a1c08b2bf476a391945114593514
03edb52eee qt: Remove redundant BitcoinGUI::setTrayIconVisible (Hennadii Stepanov)
17174f8328 gui: Replace "Hide tray icon" option with positive "Show tray icon" one (Hennadii Stepanov)
Pull request description:
This change makes easier both (1) using this option, and (2) reasoning about the code.
ACKs for top commit:
jonasschnelli:
utACK 03edb52eee
Tree-SHA512: 38e317492210d4fb13302dea383bd1f4f0ae1219d7ff2fdcb78607f15ac61a51969acaadb59b72c3f075b6356ef54368eb46fb49e6e1bd42db6d5804b97e232b
BIP 130 (sendheaders) and BIP 152 (compact blocks) do not specify at
which stage the `sendheaders` or `sendcmpct` messages should be sent.
Therefore we should tolerate them being sent before the version-verack
handshake is complete.
The timeout interval for the send and recv buffers was changed from 90
minutes to 20 minutes in commit f1920e86 in 2013, except for peers that
did not support the pong message (where the recv buffer timeout remained
at 90 minutes). A few observations:
- for peers that support BIP 31 (pong messages), this recv buffer
timeout is almost redundant with the ping timeout. We send a ping
message every two minutes, and set a timeout of twenty minutes to
receive the pong response. If the recv buffer was really timing out,
then the pong response would also time out.
- BIP 31 is supported by all nodes of p2p version 60000 and higher, and
has been in widespread use since 2013. I'd be very surprised if there
are many nodes on the network that don't support pong messages.
- The recv buffer timeout is not specified in any p2p BIP. We're free to
set it at any value we want.
- A peer that doesn't support BIP 31 and hasn't sent any message to us
at all in 90 minutes is unlikely to be useful for us, and is more likely
to be evicted AttemptToEvictConnection() since it'll have the worst
possible ping time and isn't providing blocks/transactions.
Therefore, we remove this check, and sent the recv buffer timeout to 20
minutes for all peers. This removes the final p2p version dependent
logic from the net layer, so all p2p version data can move into the
net_processing layer.
Alternative approaches:
- Set the recv buffer timeout to 90 minutes for all peers. This almost
wouldn't be a behaviour change at all (pre-BIP 31 peers would still
have the same recv buffer timeout, and we can't ever reach a recv buffer
timeout higher than 21 minutes for post-BIP31 peers, because the pong
timeout would be hit first).
- Stop supporting peers that don't support BIP 31. BIP 31 has been in
use since 2012, and implementing it is trivial.
7fabe0f359 net: don't relay to the address' originator (Vasil Dimov)
Pull request description:
For each address to be relayed we "randomly" pick 2 nodes to send the
address to (in `RelayAddress()`). However we do not take into
consideration that it does not make sense to relay the address back to
its originator (`CNode::PushAddress()` will do nothing in that case).
This means that if the originator is among the "randomly" picked nodes,
then we will relay to one node less than intended.
Fix this by skipping the originating node when choosing candidates to
relay to.
ACKs for top commit:
sdaftuar:
ACK 7fabe0f359 (this time I looked at the test, and verified the test breaks in expected ways if I break the code).
jnewbery:
utACK 7fabe0f359 (only net_processing changes. I haven't reviewed the test changes)
jonatack:
re-ACK 7fabe0f359 per `git range-diff b76abae fd897f8 7fabe0f`, change since last review is rebase and more readable Doxygen documentation
Tree-SHA512: c6a9d11c7afc97ab4e8960513f6416648d4a8c0c64b713c145a7482a7b9e54946f81386a3351e3ec0011e5594ba5ccff4d10c6f656bb80680d9f0d0a63366165
f6360088de [net processing] Clarify UpdatedBlockTip() (John Newbery)
94d2cc35be [net processing] Remove unnecesary nNewHeight variable in UpdatedBlockTip() (John Newbery)
8b57013473 [net processing] Remove nStartingHeight check from block relay (John Newbery)
Pull request description:
nStartingHeight was introduced in commit 7a47324c7 (Bitcoin version
0.2.9, P2P version 209) with the comment "better prevention of inventory
relaying during initial download". At that time, there was no function
to determine whether the node was still in Initial Block Download, so to
prevent syncing nodes from relaying old blocks to their peers, a check
was added to never relay a block to a peer where the height was lower
than 2000 less than the peer's best block. That check was updated
several times in later commits to ensure that we weren't relaying blocks
before the latest checkpoint if the peer didn't provide a
startingheight. The checkpoint comparison was changed to compare with an
estimate of the highest block in commit eae82d8e.
In commit 202e0194, all block relay was gated on being out of Initial
Block Download. In commit 0278fb5f, the comparison to nBlockEstimate was
removed since "we already checked IsIBD()".
We can remove the check against nStartingHeight entirely. If the node is
out of Initial Block Download, then its tip height must have been within
24 hours of current time, so should not be more than ~144 blocks behind
the most work tip.
This simplifies moving block inventory state into the `Peer` object (#19829).
ACKs for top commit:
Sjors:
utACK f636008
jonatack:
ACK f6360088de
MarcoFalke:
ACK f6360088de💽
ariard:
Code Review ACK f636008
Tree-SHA512: 4959cf35f1dcde46f34bffec1375729a157e1b2a1fd8a8ca33da9771c3c89a6c43e7050cdeeab8d90bb507b0795703db8c8bc304a1a5065ef00aae7a6992ca4f
4b7b58b3fe Update net_processing WTXID documentation per BIP339 (Jon Atack)
Pull request description:
BIP339 currently states:
*The wtxidrelay message MUST be sent in response to a version message from a peer whose protocol version is >= 70016 and prior to sending a verack. A wtxidrelay message received after a verack message MUST be ignored or treated as invalid.*
ACKs for top commit:
MarcoFalke:
ACK 4b7b58b3fe
practicalswift:
ACK 4b7b58b3fe
RiccardoMasutti:
ACK 4b7b58b
Tree-SHA512: 58ca6b197618cc73c70aa5de0a2d9d89a68b4cad9d5a708278ef17a9d6854d4362bcc384b6d29696642924977204a8fc120b31e91e2d97b6072b7b0d41c9f2dc
a33442fdc7 Remove m_is_manual_connection from CNodeState (Antoine Riard)
Pull request description:
Currently, this member is only used to exclude MANUAL peers from discouragement
in MaybePunishNodeForBlock(). Manual connections are already protected in
MaybeDiscourageAndDisconnect(), independently from their network
processing behaviors.
ACKs for top commit:
MarcoFalke:
cr ACK a33442fdc7
promag:
Code review ACK a33442fdc7.
jnewbery:
utACK a33442fdc7
amitiuttarwar:
code review ACK a33442fdc7
Tree-SHA512: cfe3f3dfa131373e3299002d34ae9e22ca6e1a966831bab32fcf06ff1d08f06095b4ab020cc4d267f3ec05ae23fbdc22373382ab828b999c0db11b8c842a4f0c
It's not actually possible to change this value, so remove the
indirection of it being a conn option.
DEFAULT_MAX_UPLOAD_TIMEFRAME is a compile time constant.
fac39c1983 wallet: document that tx in CreateTransaction is purely an out-param (MarcoFalke)
faac31521b Remove unused and confusing CTransaction constructor (MarcoFalke)
Pull request description:
The constructor is confusing and dangerous (as explained in the TODO), fix that by removing it.
ACKs for top commit:
laanwj:
Code review ACK fac39c1983
promag:
Code review ACK fac39c1983.
theStack:
Code review ACK fac39c1983
Tree-SHA512: e0c8cffce8d8ee0166b8e1cbfe85ed0657611e26e2af0d69fde70eceaa5d75cbde3eb489af0428fe4fc431360b4c791fb1cc21b8dee7d4c7a4f17df00836229d
faaad1bbac p2p: Ignore version msgs after initial version msg (MarcoFalke)
fad68afcff p2p: Ignore non-version msgs before version msg (MarcoFalke)
Pull request description:
Handshake misbehaviour doesn't cost us more than any other unknown message, so it seems odd to treat it differently
ACKs for top commit:
jnewbery:
utACK faaad1bbac
practicalswift:
ACK faaad1bbac: patch looks correct
Tree-SHA512: 9f30c3b5c1f6604fd02cff878f10999956152419a3dd9825f8267cbdeff7d06787418b41c7fde8a00a5e557fe89204546e05d5689042dbf7b07fbb7eb95cddff
f3d870fc22 wallet: List all wallets in non-SQLite or non-BDB builds (Russell Yanofsky)
d70dc89e78 refactor: Consolidate redundant wallet database path and exists functions (Russell Yanofsky)
6a7a63644c refactor: Drop call to GetWalletEnv in wallet salvage code (Russell Yanofsky)
6ee9cbdd18 refactor: Replace ListWalletDir() function with ListDatabases() (Russell Yanofsky)
5aaeb6cf87 MOVEONLY: Move IsBDBFile, IsSQLiteFile, and ListWalletDir (Russell Yanofsky)
Pull request description:
This PR does not change behavior when bitcoin is built normally with both the SQLite and BDB libraries. It just makes non-SQLite and non-BDB builds more similar to the normal build. Specifically:
- It makes wallet directory lists always include all wallets so wallets don't appear missing depending on the build.
- It now triggers specific "Build does not support SQLite database format" and "Build does not support Berkeley DB database format" errors if a wallet can't be loaded instead of the more ambiguous and scary "Data is not in recognized format" error.
Both changes are implemented in the last commit. The previous commits are just refactoring cleanups that make the last commit possible and consolidate and reduce code.
ACKs for top commit:
achow101:
ACK f3d870fc22
promag:
Tested ACK f3d870fc22. Tested a --without-sqlite build with sqlite wallets.
Tree-SHA512: 029ad21559dbc338b5f351d05113c51bc25bce830f4f4e18bcd82287bc528275347a60249da65b91d252632aeb70b25d057bd59c704bfcaafb9f790bc5b59762
nStartingHeight was introduced in commit 7a47324c7 (Bitcoin version
0.2.9, P2P version 209) with the comment "better prevention of inventory
relaying during initial download". At that time, there was no function
to determine whether the node was still in Initial Block Download, so to
prevent syncing nodes from relaying old blocks to their peers, a check
was added to never relay a block to a peer where the height was lower
than 2000 less than the peer's best block. That check was updated
several times in later commits to ensure that we weren't relaying blocks
before the latest checkpoint if the peer didn't provide a
startingheight. The checkpoint comparison was changed to compare with an
estimate of the highest block in commit eae82d8e.
In commit 202e0194, all block relay was gated on being out of Initial
Block Download. In commit 0278fb5f, the comparison to nBlockEstimate was
removed since "we already checked IsIBD()".
We can remove the check against nStartingHeight entirely. If the node is
out of Initial Block Download, then its tip height must have been within
24 hours of current time, so should not be more than ~144 blocks behind
the most work tip.
b3a515c0be Clarify comments around outbound peer eviction (Suhas Daftuar)
daffaf03fb Periodically make block-relay connections and sync headers (Suhas Daftuar)
3cc8a7a0f5 Use conn_type to identify block-relay peers, rather than m_tx_relay == nullptr (Suhas Daftuar)
91d61952a8 Simplify and clarify extra outbound peer counting (Suhas Daftuar)
Pull request description:
To make eclipse attacks more difficult, regularly initiate outbound connections
and stay connected long enough to sync headers and potentially learn of new
blocks. If we learn a new block, rotate out an existing block-relay peer in
favor of the new peer.
This augments the existing outbound peer rotation that exists -- currently we
make new full-relay connections when our tip is stale, which we disconnect
after waiting a small time to see if we learn a new block. As block-relay
connections use minimal bandwidth, we can make these connections regularly and
not just when our tip is stale.
Like feeler connections, these connections are not aggressive; whenever our
timer fires (once every 5 minutes on average), we'll try to initiate a new
block-relay connection as described, but if we fail to connect we just wait for
our timer to fire again before repeating with a new peer.
ACKs for top commit:
ariard:
Code Review ACK b3a515c, only change since last time is dropping a useless `cs_main` taking. I manually tested a previous version of the PR, and not substantial change has been introduced since then which would alter behavior IMO.
jonatack:
Tested ACK b3a515c0be over several weeks, though this change and behavior could benefit from test coverage and other follow-ups (refactoring, etc.) described in the review feedback. I did not verify the behavior of `m_start_extra_block_relay_peers` only being enabled after initial chain sync. Since my last review, one unneeded `cs_main` lock was removed.
Tree-SHA512: 75fc6f8e8003e88e93f86b845caf2d30b8b9c0dbb0a6b8aabe4e24ea4f6327351f736a068a3b2720a8a581b789942a3a47f921e2afdb47e88bc50d078aa37b6f
Currently, this member is only used to exclude MANUAL peers from discouragement
in MaybePunishNodeForBlock(). Manual connections are already protected in
MaybeDiscourageAndDisconnect(), independently from their network
processing behaviors.
To make eclipse attacks more difficult, regularly initiate outbound connections
and stay connected long enough to sync headers and potentially learn of new
blocks. If we learn a new block, rotate out an existing block-relay peer in
favor of the new peer.
This augments the existing outbound peer rotation that exists -- currently we
make new full-relay connections when our tip is stale, which we disconnect
after waiting a small time to see if we learn a new block. As block-relay
connections use minimal bandwidth, we can make these connections regularly and
not just when our tip is stale.
Like feeler connections, these connections are not aggressive; whenever our
timer fires (once every 5 minutes on average), we'll try to initiate a new
block-relay connection as described, but if we fail to connect we just wait for
our timer to fire again before repeating with a new peer.
For each address to be relayed we "randomly" pick 2 nodes to send the
address to (in `RelayAddress()`). However we do not take into
consideration that it does not make sense to relay the address back to
its originator (`CNode::PushAddress()` will do nothing in that case).
This means that if the originator is among the "randomly" picked nodes,
then we will relay to one node less than intended.
Fix this by skipping the originating node when choosing candidates to
relay to.
fa0d8359b3 log: Clarify that failure to read fee_estimates.dat is non-fatal (MarcoFalke)
faefa5db5f log: Clarify that failure to write fee_estimates.dat is non-fatal (MarcoFalke)
Pull request description:
two minor logging fixups
ACKs for top commit:
practicalswift:
ACK fa0d8359b3: patch looks correct
laanwj:
Code review ACK fa0d8359b3
Tree-SHA512: d1e7e595d3b4a5e497ee7ab70f3be5783dafec2726ef8e012db836c15e8e622022859a4472d6b516fe19d327737b25fdfb509cd9aeb022ca847b13c54e55800a
0f949cde3d Add regression test for incorrect decoding (Pieter Wuille)
39c42c4420 Improve heuristic hex transaction decoding (Pieter Wuille)
Pull request description:
The current hex tx decoding logic will refuse to decode valid extended-encoded transactions if the result fails the heuristic sanity check, even when the legacy-encoding fails. Fix this.
Fixes#20579
ACKs for top commit:
achow101:
Code review ACK 0f949cde3d
jonatack:
Tested ACK 0f949cde3d
laanwj:
Code review ACK 0f949cde3d
Tree-SHA512: bd6dc80d824eb9a87026a623be910cac92173f8ce1c8b040c2246348c3cf0c6d64bcc40127b859e5e4da1efe88cf02a6945f7ebb91079799395145cb09d9c7a5
6fa72ceb80 test: add coverage for passing fee rate as a string (Jon Atack)
ce207d6b93 wallet, bugfix: allow send to take string fee rate values (Jon Atack)
Pull request description:
RPC send currently only accepts fee rates as numbers, which is a user-facing bug. It should accept fee rates as an amount, e.g. a string or a number, as documented in its help and like sendtoaddress, sendmany, fundrawtransaction, walletcreatefundedpsbt, and bumpfee. Provide a fix and regression test coverage.
ACKs for top commit:
MarcoFalke:
review ACK 6fa72ceb80
achow101:
Code review ACK 6fa72ceb80
promag:
Code review ACK 6fa72ceb80.
Tree-SHA512: 735f9269cb1b81953764b5283449c0b154bd62de034225be5bcedc515c84faf767fe8fe0741008679fe412922c847b00d116cb11aab775236b779c847ba87167
343dc4760f test: add test for high-bandwidth mode states in getpeerinfo (Sebastian Falbesoner)
dab6583307 doc: release note for new getpeerinfo fields "bip152_hb_{from,to}" (Sebastian Falbesoner)
a7ed00f8bb rpc: expose high-bandwidth mode states via getpeerinfo (Sebastian Falbesoner)
30bc8fab68 net: save high-bandwidth mode states in CNodeStats (Sebastian Falbesoner)
Pull request description:
Fixes#19676, "_For every peer expose through getpeerinfo RPC whether or not we selected them as HB peers, and whether or not they selected us as HB peers._" See [BIP152](https://github.com/bitcoin/bips/blob/master/bip-0152.mediawiki), in particular the [protocol flow diagram](https://github.com/bitcoin/bips/raw/master/bip-0152/protocol-flow.png). The newly introduced states are changed on the following places in the code:
* on reception of a `SENDCMPCT` message with valid version, the field `m_highbandwidth_from` is changed depending on the first integer parameter in the message (1=high bandwidth, 0=low bandwidth), i.e. it just mirrors the field `CNodeState.fPreferHeaderAndIDs`.
* after adding a `SENDCMPCT` message to the send queue, the field `m_highbandwidth_to` is changed depending on how the first integer parameter is set (same as above)
Note that after receiving `VERACK`, the node also sends `SENDCMPCT`, but that is only to announce the preferred version and never selects high-bandwidth mode, hence there is no need to change the state variables there, which are initialized to `false` anyways.
ACKs for top commit:
naumenkogs:
reACK 343dc4760f
jonatack:
re-ACK 343dc4760f per `git range-diff 7ea6499 4df1d12 343dc47`
Tree-SHA512: f4999e6a935266812c2259a9b5dc459710037d3c9e938006d282557cc225e56128f72965faffb207fc60c6531fab1206db976dd8729a69e8ca29d4835317b99f
34e33ab859 Remove g_relay_txes (John Newbery)
68334b3944 [net processing] Add m_ignores_incoming_txs to PeerManager and use internally (John Newbery)
4d510aa055 [init] Use MakeUnique<> to construct peerman (John Newbery)
f3f61d0eb9 [net processing] Add IgnoresIncomingTxs() function to PeerManager (John Newbery)
5805b8299f [net processing] Move PushNodeVersion into PeerManager (John Newbery)
Pull request description:
`g_relay_txes` is only required inside net_processing and is set only once at startup. Instead of having a global, move it to be a const member of PeerManager.
This requires moving `PushNodeVersion()` into `PeerManager`, which also allows us to remove the `connman` argument.
ACKs for top commit:
narula:
utACK 34e33ab859
MarcoFalke:
re-ACK 34e33ab85💐
Tree-SHA512: 33f75b522e5f34b243731932eb96cd6c8ce9db69b5186395e3718858bc715cec1711a663c6afc5880462812cbc15040930e2dc648b2acad6bc6502ad1397c5e3
90c0f267bd Squashed 'src/crc32c/' changes from 224988680f..b5ef9be675 (MarcoFalke)
Pull request description:
Except for the ARM64 darwin fix this is just code-shuffling in files/functions we don't use
ACKs for top commit:
jonasschnelli:
Tested ACK fa7c8d136f - Tested this on an ARM Mac. Linking issue went away (successful depends compilation). Also tested that the ARM64 hardware acceleration code part was used.
laanwj:
Code review ACK fa7c8d136f
Tree-SHA512: 1fa156d72c75d22ead2677b165e566978331f795d52a637e478d83d1cf2adddd84eed259d617df6d11270af2e4e57ae6991aec3bc4c0bdf5dec959f44daa14eb
fa11110bff util: Allow use of C++14 chrono literals (MarcoFalke)
Pull request description:
I think we should allow the use of chrono literals for new code to make it less verbose. Obviously old code can stay as-is.
This patch pulls in the needed namespace and replaces some lines for illustrative purposes.
ACKs for top commit:
vasild:
ACK fa11110bff
jonatack:
ACK fa11110bff
Tree-SHA512: ee2b72c8f28dee07b33b9a8ee8f7c87c0bc43b05c56a17b786cf9803ef204c7628e01b02de1af1a4eb01f5cdf6fc336f69c2833e17acd606ebda20ac6917e6bb
fa40168ab3 Remove unused bits from service flags enum (MarcoFalke)
Pull request description:
Remove service bits that haven't been observed on the active network for years and won't ever be observed on the network with this meaning. Keeping this dead assignment in our source code forever doesn't add any value.
I somehow forgot to do this in commit fa0d0ff6e1.
ACKs for top commit:
laanwj:
Code review ACK fa40168ab3
practicalswift:
cr ACK fa40168ab3
fanquake:
ACK fa40168ab3
Tree-SHA512: 376e5ac05940493cf2209fea60515c843e978c4b476f2524f6bf7a37a646d237c3ddcf6c0fa23641f9ba550f625609703d9b51b4be631a7f2a90e1092b557232
3025ca9e77 [net processing] Add RemovePeer() (John Newbery)
a20ab22786 [net processing] Make GetPeerRef const (John Newbery)
ed7e469cee [net_processing] Move peer_map to PeerManager (John Newbery)
a529fd3e3f [net processing] Move GetNodeStateStats into PeerManager (John Newbery)
Pull request description:
This moves `g_peer_map` from a global in net_processing.cpp's unnamed namespace to being a member `m_peer_map` of `PeerManager`.
ACKs for top commit:
theuni:
Re-ACK 3025ca9e77.
dongcarl:
Re-ACK 3025ca9
hebasto:
re-ACK 3025ca9e77, since my [previous](https://github.com/bitcoin/bitcoin/pull/19910#pullrequestreview-545574237) review only reverted the change that introduced NRVO in `PeerManager::GetPeerRef`, and comments are fixed in the proper commits.
Tree-SHA512: 6369eb3c688ac5b84f89f7674115f78ff02edbed76063ac2ebb1759894c9e973883e10821a35dab92bd3d738280acc095bd5368f552a060b83cd309330387d47
81137c60fe test: Add new ChainTestingSetup and use it (Carl Dong)
7e9e7fe567 qt/test: [FIX] Add forgotten Context setting in RPCNestedTests (Carl Dong)
Pull request description:
This is part 1/n of the effort to [de-globalize `ChainstateManager`](https://github.com/bitcoin/bitcoin/pull/20158)
Reviewers: Looking for tested/Code-Review/plain-ACKs
### Context
In many of our tests, we manually instantiate `NodeContext`s or `ChainstateManager`s in the test code, which is error prone. Instead, we should create or use existing references because:
1. Before we [de-globalize `ChainstateManager`](https://github.com/bitcoin/bitcoin/pull/20158), much of our code still acts on `g_chainman` (our global `ChainstateManager`), sometimes even when you're calling a method on a specific instance of `ChainstateManager`! This means that we may act on two instances of `ChainstateManager`, which is most likely not what we want.
2. Using existing references (initialized by the `{Basic,}TestingSetup` constructors) means that you're acting on objects which are properly initialized, instead of "just initialized enough for this dang test to pass". Also, they're already there! It's free!
3. By acting on the right object, we also allow the review-only assertions in future commits of [de-globalize `ChainstateManager`](https://github.com/bitcoin/bitcoin/pull/20158) to work and demonstrate correctness.
Some more detailed debugging notes can be found in the first commit, reproduced below:
```
Previously, the validation_chainstatemanager_tests test suite
instantiated its own duplicate ChainstateManager on which tests were
performed.
This wasn't a problem for the specific actions performed in
that suite. However, the existence of this duplicate ChainstateManager
and the fact that many of our validation static functions reach for
g_chainman, ::Chain(state|)Active means we may end up acting on two
different CChainStates should we write more extensive tests in the
future.
This change adds a new ChainTestingSetup which performs all
initialization previously done by TestingSetup except:
1. Mempool sanity check frequency setting
2. ChainState initialization
3. Genesis Activation
4. {Ban,Conn,Peer}Man initialization
Means that we will no longer need to initialize a duplicate
ChainstateManger in order to test the initialization codepaths of
CChainState and ChainstateManager.
Lastly, this change has the additional benefit of allowing for
review-only assertions meant to show correctness to work in future work
de-globalizing g_chainman.
In the test chainstatemanager_rebalance_caches, an additional
LoadGenesisBlock call is added as MaybeReblanaceCaches eventually calls
FlushBlockFile, which tries to access vinfoBlockFile[nLastBlockFile],
which is out of bounds when LoadGenesisBlock hasn't been called yet.
-----
Note for the future:
In a previous version of this change, I put ChainTestingSetup between
BasicTestingSetup and TestingSetup such that TestingSetup inherited from
ChainTestingSetup.
This was suboptimal, and showed how the class con/destructor inheritance
structure we have for these TestingSetup classes is probably not the
most suitable abstraction. In particular, for both TestingSetup and
ChainTestingSetup, we need to stop the scheduler first before anything
else. Otherwise classes depending on the scheduler may be referenced
by the scheduler after said classes are freed. This means that there's
no clear parallel between our teardown code and C++'s destructuring
order for class hierarchies.
Future work should strive to coalesce (as much as possible) test and
non-test init codepaths and perhaps structure it in a more fail-proof
way.
```
ACKs for top commit:
MarcoFalke:
ACK 81137c60fe looking excellent now 🐩
jnewbery:
ACK 81137c60fe
ryanofsky:
Code review ACK 81137c60fe. This change is simpler after the rebase because wallet & bench commits are dropped.
Tree-SHA512: a8d84f08f2db6428b0b88449bdc814c9db35b7559156d536dfebd3225c2707dba65959e76d2152e3f8c96eacbf1e0b0000f745edf1e196deddb97ff1ef360953
1583498fb6 Send and require SENDADDRV2 before VERACK (Pieter Wuille)
c5a8919660 Don't send 'sendaddrv2' to pre-70016 software (Pieter Wuille)
Pull request description:
BIP155 defines addrv2 and sendaddrv2 for all protocol versions, but some implementations reject messages they don't know. As a courtesy, don't send it to nodes with a version before 70016, as no software is known to support BIP155 that doesn't announce at least that protocol version number.
Also move the sending of sendaddrv2 earlier (before sending verack), as proposed in https://github.com/bitcoin/bips/pull/1043. This has the side effect that local address broadcast of torv3 will work (as it'll only trigger after we know whether or not the peer supports addrv2).
ACKs for top commit:
MarcoFalke:
ACK 1583498fb6
jnewbery:
ACK 1583498fb6
jonatack:
ACK 1583498fb6
vasild:
ACK 1583498
Tree-SHA512: 3bd5833fa8c8567b6dedd99e4a9b6bb71c127aa66d5284b217503c86d597dc59aa7382c41f3a4bf561bb658b89db81d1a7703a700eef4ffc17cb916660e23a82
Previously, the validation_chainstatemanager_tests test suite
instantiated its own duplicate ChainstateManager on which tests were
performed.
This wasn't a problem for the specific actions performed in
that suite. However, the existence of this duplicate ChainstateManager
and the fact that many of our validation static functions reach for
g_chainman, ::Chain(state|)Active means we may end up acting on two
different CChainStates should we write more extensive tests in the
future.
This change adds a new ChainTestingSetup which performs all
initialization previously done by TestingSetup except:
1. RPC command registration
2. ChainState initialization
3. Genesis Activation
4. {Ban,Conn,Peer}Man initialization
Means that we will no longer need to initialize a duplicate
ChainstateManger in order to test the initialization codepaths of
CChainState and ChainstateManager.
Lastly, this change has the additional benefit of allowing for
review-only assertions meant to show correctness to work in future work
de-globalizing g_chainman.
In the test chainstatemanager_rebalance_caches, an additional
LoadGenesisBlock call is added as MaybeReblanaceCaches eventually calls
FlushBlockFile, which tries to access vinfoBlockFile[nLastBlockFile],
which is out of bounds when LoadGenesisBlock hasn't been called yet.
-----
Note for the future:
The class con/destructor inheritance structure we have for these
TestingSetup classes is probably not the most suitable abstraction. In
particular, for both TestingSetup and ChainTestingSetup, we need to stop
the scheduler first before anything else. Otherwise classes depending on
the scheduler may be referenced by the scheduler after said classes are
freed. This means that there's no clear parallel between our teardown
code and C++'s destructuring order for class hierarchies.
Future work should strive to coalesce (as much as possible) test and
non-test init codepaths and perhaps structure it in a more fail-proof
way.
Whenever both encodings are permitted, try both, and if only one succeeds,
return that one. Otherwise prefer the one for which the heuristic sanity
check passes. If that is the case for neither or for both, return the
extended-permitting deserialization.
5baa88fd38 test: Remove no longer needed MakeChain calls (Russell Yanofsky)
6965f1352d refactor: Replace uses ChainActive() in interfaces/chain.cpp (Russell Yanofsky)
3fbbb9a640 refactor: Get rid of more redundant chain methods (Russell Yanofsky)
Pull request description:
This just drops three interfaces::Chain methods replacing them with other calls.
Motivation for removing these chain methods:
- Need to get rid of findFirstBlockWithTimeAndHeight for #10102, which doesn't support overloaded methods
- Followup from https://github.com/bitcoin/bitcoin/pull/16426#discussion_r412487403
- phantomcircuit comments about findNextBlock test http://www.erisian.com.au/bitcoin-core-dev/log-2020-06-06.html#l-214
Behavior is not changing in any way here. A TODO comment in ScanForWalletTransactions was removed, but just because it was invalid (see https://github.com/bitcoin/bitcoin/pull/19195#discussion_r448020762), not because it was implemented.
ACKs for top commit:
MarcoFalke:
re-ACK 5baa88fd38 🕶
dongcarl:
ACK 5baa88fd38
Tree-SHA512: d20a2a8cf8742e6100c6d3a4871ed67f184925712cf9e55d301abee60353bf3f74cd0d46a13be1715d1c2faef72102bb321654d08a128c2ef6880f72b72a6687
b5ef9be675 Merge #1: Merge changes from upstream
9e7f512430 Merge remote-tracking branch 'origin/master' into bitcoin-fork
1f85030246 Add support for ARM64 darwin (#43)
3bb959c982 Remove unnecessary reinterpret_cast (#42)
2e97ab26b1 Fix (unused) ReadUint64LE for BE machines (#41)
47b40d2209 Bump dependencies. (#40)
ba74185625 Move CI to Visual Studio 2019.
efa301a7e5 Allow different C/C++ standards when this is used as a subproject.
cc6d71465e CMake: Use configure_package_config_file()
git-subtree-dir: src/crc32c
git-subtree-split: b5ef9be6755a2e61e2988bb238f13d1c0ee1fa0a
65273fa0e7 Clear m_addr_known before our periodic self-advertisement (Suhas Daftuar)
Pull request description:
We use a rolling bloom filter to track which addresses we've previously sent a peer, but after #7125 we no longer clear it every day before our own announcement. This looks to me like an oversight which has the effect of reducing the frequency with which we actually self-announce our own address, so this reintroduces resetting that filter.
ACKs for top commit:
naumenkogs:
ACK 65273fa0e7
laanwj:
Code review ACK 65273fa0e7
sipa:
utACK 65273fa0e7
Tree-SHA512: 602c155fb6d2249b054fcb6f1c0dd17143605ceb87132286bbd90babf26d258ff6c41f9925482c17e2be41805d33f9b83926cb447f394969ffecd4bccfa0a64f
as BIP339 currently states:
"The wtxidrelay message MUST be sent in response to a version
message from a peer whose protocol version is >= 70016 and
prior to sending a verack. A wtxidrelay message received after
a verack message MUST be ignored or treated as invalid."
An uppercase "ERROR" in the log might indicate a fatal error. Though,
all read-failures for fee_estimates.dat are non-fatal, so avoid the
"ERROR".
Before:
ERROR: CBlockPolicyEstimator::Read(): up-version (149900) fee estimate file
After:
CBlockPolicyEstimator::Read(): unable to read policy estimator data (non-fatal): up-version (149900) fee estimate file
fa8abdc995 rpc: Use FeeModes doc helper in estimatesmartfee (MarcoFalke)
Pull request description:
Not sure why this doesn't use the doc helper, probably an oversight?
ACKs for top commit:
laanwj:
Code review ACK fa8abdc995
Tree-SHA512: 1f2dc8356e3476ddcf9cafafa7f9865ad95bed1e3067c0edab8e3c483e374bdbdbecc066167554b4a1b479e28f6a52c4ae6a75a70c67ee4e1ff4f3ba36b04001
4e28753f60 feestimator: encapsulate estimation file logic (Antoine Poinsot)
e8ea6ad9c1 init: don't create a CBlockPolicyEstimator if we don't relay transactions (Antoine Poinsot)
86ff2cf202 Remove the remaining fee estimation globals (Antoine Poinsot)
03bfeee957 interface: remove unused estimateSmartFee method from node (Antoine Poinsot)
Pull request description:
If the `blocksonly` mode is turned on after running with transaction
relay enabled for a while, the fee estimation will serve outdated data
to both the internal wallet and to external applications that might be
feerate-sensitive and make use of `estimatesmartfee` (for example a
Lightning Network node).
This has already caused issues (for example https://github.com/bitcoin/bitcoin/issues/16840 (C-lightning), or https://github.com/lightningnetwork/lnd/issues/2562 (LND)) and it seems prudent to fail rather than to give inaccurate values.
This fixes#16840, and closes#16890 which tried to fix the symptoms (RPC) but not the cause as mentioned by sdaftuar :
> If this is a substantial problem, then I would think we should take action to protect our own wallet users as well (rather than hide the results of what our fee estimation would do!).
ACKs for top commit:
MarcoFalke:
re-ACK 4e28753f60👋
jnewbery:
utACK 4e28753f60
Tree-SHA512: c869cf03b86d8194002970bbc84662dae76874967949b9be0d9a4511a1eabcb1627c38aca3154da9dcece1a4c49ec02bd4f9fcca2ec310986e07904559e63ba8
fa0f415709 net: Assume that SetCommonVersion is called at most once per peer (MarcoFalke)
Pull request description:
This restores the check removed in https://github.com/bitcoin/bitcoin/pull/17785#discussion_r503224381
Instead of using `error`, which was used previously, it uses a newly introduced `Assume()`. `error` had several issues:
* It logs unconditionally to the debug log
* It doesn't abort the program when the error is hit in tests
ACKs for top commit:
practicalswift:
cr ACK fa0f415709: patch looks correct
jnewbery:
utACK fa0f415709
Tree-SHA512: cd7424a9485775e8c7093b725f8f52a90d47485185e79bac80f7810e450d0b3fda608d8805e9239094929f7bad2dca3fe772fb78ae606c2399d15405521e136b
6690adba08 Warn when binaries are built from a dirty branch. (Tyler Chambers)
Pull request description:
- Adjusted `--version` flag behavior in bitcoind and bitcoin-wallet to have the same behavior.
- Added `--version` flag to bitcoin-tx to match.
- Added functionality in gen-manpages.sh to error when attempting to generate man pages for binaries built from a dirty branch.
mitigates problem with issue #20412
ACKs for top commit:
laanwj:
Tested ACK 6690adba08
Tree-SHA512: b5ca509f1a57f66808c2bebc4b710ca00c6fec7b5ebd7eef58018e28e716f5f2358e36551b8a4df571bf3204baed565a297aeefb93990e7a99add502b97ee1b8
1816327e53 p2p: Put disconnecting logs into BCLog::NET category (Hennadii Stepanov)
Pull request description:
It's too noisy:
```
$ cat debug.log | wc -l
28529
$ cat debug.log | grep "Disconnecting and discouraging peer" | wc -l
10177
```
ACKs for top commit:
MarcoFalke:
noban, addnode and local peers are still unconditionally logged (as they should), but this one can go into a category, so cr-ACK 1816327e53
practicalswift:
ACK 1816327e53 for the reasons MarcoFalke gave above.
ajtowns:
ACK 1816327e53
Tree-SHA512: c312c1009090840659b2cb1364d8ad9b6ab8e742fc462aef169996d93c76c248507639a00257ed9d73a6916c01176b1793491b2305e92fdded5f9de0935b6ba6
This commit does not change behavior when bitcoin is built normally with both
the SQLite and BDB libraries. It just makes non-SQLite and non-BDB builds
more similar to the normal build. Specifically:
- It makes wallet directory lists always include all wallets so wallets don't
appear missing depending on the build.
- It now triggers specific "Build does not support SQLite database format" and
"Build does not support Berkeley DB database format" errors if a wallet can't
be loaded instead of the more ambiguous and scary "Data is not in recognized
format" error.
No change in behavior. Just remove a little bit of code, reduce macro usage,
remove duplicative functions, and make BDB and SQLite implementations more
consistent with each other.
No observable change in behavior. This just avoids a redundant environment
lookup. Motivation is to be able to simplify the GetWalletEnv implementation in
an upcoming commit.
This commit does not change to any code and behavior. It it is easily reviewed
with the --color-moved=dimmed_zebra git diff option.
Motivation for this change is to:
- Consolidate redundant functions
IsBDBFile /ExistsBerkeleyDatabase / SplitWalletPath, and
IsSQLiteFile / ExistsSQLiteDatabase in the next commits
- Detect SQLite wallets consistently regardless whether bitcoin is built with
SQLite support in the next commits
- Avoid attempting to open SQLite databases with the BDB library when bitcoin
is built without SQLite support in the next commits
fac7ab1d5b refactor: Use C++17 std::array where possible (MarcoFalke)
Pull request description:
Using the C++11 std::array with explicit template parameters is problematic because overshooting the size will fill the memory with default constructed types.
For example,
```cpp
#include <array>
#include <iostream>
int main()
{
std::array<int, 3> a{1, 2};
for (const auto& i : a) {
std::cout << i << std::endl; // prints "1 2 0"
}
}
```
ACKs for top commit:
jonasschnelli:
Code Review ACK fac7ab1d5b
practicalswift:
cr ACK fac7ab1d5b
vasild:
ACK fac7ab1d
promag:
Code review ACK fac7ab1d5b.
Tree-SHA512: ef7e872340226e0d6160e6fd66c6ca78b2ef9c245fa0ab27fe4777aac9fba8d5aaa154da3d27b65dec39a6a63d07f1063c3a8ffb667a98ab137756a1a0af2656
faa05854f8 util: Remove probably misleading TODO (MarcoFalke)
fac5efe730 util: Add Assume() identity function (MarcoFalke)
fa861569dc util: Allow Assert(...) to be used in all contexts (practicalswift)
Pull request description:
This is needed for #20138. Please refer to the added documentation for motivation.
ACKs for top commit:
practicalswift:
cr ACK faa05854f8
jnewbery:
utACK faa05854f8
hebasto:
ACK faa05854f8, I have reviewed the code and it looks OK, I agree it can be merged.
Tree-SHA512: 72165fbd898b92ab9a79b070993fa1faa86c2e3545b6645e72c652bda295d5107bc298d0482bf3aaf0926fc0c3e6418a445c0e073b08568c44231f547f76a688
This behavior was apparently inadvertently broken in 5400ef6; without this
change our daily self-announcements frequently go unsent, because our
address is still in the peer's rolling bloom filter (for potentially many
days, depending on addr traffic).
cadb77a6ab net: Add compat.h header for htonl function (Hennadii Stepanov)
f796f0057b net: Drop unneeded headers when compat.h included (Hennadii Stepanov)
467c346448 net: Drop unneeded Windows headers in compat.h (Hennadii Stepanov)
Pull request description:
It is the `compat.h` header's job to provide platform-agnostic interfaces for internet operations.
No need in `#include <arpa/inet.h>` scattered around.
ACKs for top commit:
practicalswift:
re-ACK cadb77a6ab: patch looks even better
laanwj:
Code review ACK cadb77a6ab
Tree-SHA512: 625ff90b2806310ab856a6ca1ddb6d9a85aa70f342b323e8525a711dd12219a1ecec8373ec1dca5a0653ffb11f9b421753887b25615d991ba3132c1cca6a3c6e
This moves the fee_estimates file management to the CBlockPolicyEstimator
Flush() method.
Co-authored-by: John Newbery <john@johnnewbery.com>
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This moves the CBlockPolicyEstimator to the NodeContext, which get rids
of two globals and allows us to conditionally create the
CBlockPolicyEstimator (and to remove a circular dep).
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
1e62350ca2 refactor: Improve use of explicit keyword (Fabian Jahr)
c502a6dbfb lint: Use c++17 std in cppcheck linter (Fabian Jahr)
Pull request description:
I found the `extended-lint-cppcheck` linter still uses `std=c++11` when reviewing #20471. The only difference in the output after this change is one line is missing:
```
src/script/descriptor.cpp:159:5: warning: Struct 'PubkeyProvider' has a constructor with 1 argument that is not explicit. [noExplicitConstructor]
```
After some digging, I am still not sure why this one is ignored with c++17 when 40 other`noExplicitConstructor` warnings were still appearing.
In the second commit, I fix these warnings, adding `explicit` where appropriate and adding fixes to ignore otherwise.
ACKs for top commit:
practicalswift:
cr ACK 1e62350ca2: patch looks correct!
MarcoFalke:
review ACK 1e62350ca2
Tree-SHA512: dff7b324429a57160e217cf38d9ddbb6e70c6cb3d3e3e0bd4013d88e07afc2292c3df94d0acf7122e9d486322821682ecf15c8f2724a78667764c05d47f89a12
8963b2c71f qt: Improve comments in WalletController::getOrCreateWallet() (Hennadii Stepanov)
5fcfee68af qt: Call setParent() in the parent's context (Hennadii Stepanov)
5659e73493 qt: Add ObjectInvoke template function (Hennadii Stepanov)
Pull request description:
The `setParent(parent)` internally calls `QCoreApplication::sendEvent(parent, QChildEvent)` that implies running in the thread which created the parent object. That is not the case always, and an internal assertion fails in the debug mode.
Steps to reproduce this issue on master (007e15dcd7) on Linux Mint 20 (x86_64):
```
$ make -C depends DEBUG=1
$ CONFIG_SITE=$PWD/depends/x86_64-pc-linux-gnu/share/config.site ./configure
$ make
$ QT_FATAL_WARNINGS=1 lldb src/qt/bitcoin-qt -- --regtest -debug=qt
(lldb) target create "src/qt/bitcoin-qt"
Current executable set to '/home/hebasto/GitHub/bitcoin/src/qt/bitcoin-qt' (x86_64).
(lldb) settings set -- target.run-args "--regtest" "-debug=qt"
(lldb) run
Process 431562 launched: '/home/hebasto/GitHub/bitcoin/src/qt/bitcoin-qt' (x86_64)
# load wallet via GUI
Process 431562 stopped
* thread #24, name = 'QThread', stop reason = signal SIGABRT
frame #0: 0x00007ffff794518b libc.so.6`__GI_raise(sig=2) at raise.c:51:1
(lldb) bt
* thread #24, name = 'QThread', stop reason = signal SIGABRT
* frame #0: 0x00007ffff794518b libc.so.6`__GI_raise(sig=2) at raise.c:51:1
frame #1: 0x00007ffff7924859 libc.so.6`__GI_abort at abort.c:79:7
frame #2: 0x0000555556508ec4 bitcoin-qt`::qt_message_fatal((null)=<unavailable>, context=<unavailable>, message=<unavailable>) at qlogging.cpp:1690:15
frame #3: 0x00005555565099cf bitcoin-qt`QMessageLogger::fatal(this=<unavailable>, msg=<unavailable>) const at qlogging.cpp:796:21
frame #4: 0x000055555650479d bitcoin-qt`qt_assert_x(where=<unavailable>, what=<unavailable>, file=<unavailable>, line=<unavailable>) at qglobal.cpp:3088:46
frame #5: 0x0000555556685733 bitcoin-qt`QCoreApplicationPrivate::checkReceiverThread(receiver=0x0000555557b27510) at qcoreapplication.cpp:557:5
frame #6: 0x00005555567ced86 bitcoin-qt`QApplication::notify(this=0x00007fffffffd4a0, receiver=0x0000555557b27510, e=0x00007fff9a7f8ce0) at qapplication.cpp:2956:27
frame #7: 0x0000555556685d31 bitcoin-qt`QCoreApplication::notifyInternal2(receiver=0x0000555557b27510, event=0x00007fff9a7f8ce0) at qcoreapplication.cpp:1024:24
frame #8: 0x00005555566c9224 bitcoin-qt`QObjectPrivate::setParent_helper(QObject*) [inlined] QCoreApplication::sendEvent(event=<unavailable>, receiver=<unavailable>) at qcoreapplication.h:233:59
frame #9: 0x00005555566c9210 bitcoin-qt`QObjectPrivate::setParent_helper(this=0x00007fff85855260, o=0x0000555557b27510) at qobject.cpp:2036
frame #10: 0x00005555566c9b41 bitcoin-qt`QObject::setParent(this=<unavailable>, parent=<unavailable>) at qobject.cpp:1980:24
frame #11: 0x0000555555710be8 bitcoin-qt`WalletController::getOrCreateWallet(std::unique_ptr<interfaces::Wallet, std::default_delete<interfaces::Wallet> >) + 2534
...
```
Fixes#18835.
ACKs for top commit:
ryanofsky:
Code review ACK 8963b2c71f. No changes since last review, just rebase because of conflict on some adjacent lines
jonasschnelli:
utACK 8963b2c71f
Tree-SHA512: fef615904168717df3d8a0bd85eccc3eef990cc3e66c9fa280c8ef08ea009a7cb5a2a4f868ed0be3c0fe5bf683e8465850b5958deb896fdadd22d296186c9586
db058efeb0 sync: use HasReason() in double lock tests (Vasil Dimov)
a21dc469cc sync: const-qualify the argument of double_lock_detected() (Vasil Dimov)
6d3689fcf6 sync: print proper lock order location when double lock is detected (Vasil Dimov)
Pull request description:
Before:
```
Assertion failed: detected double lock at src/sync.cpp:153, details in debug log.
```
After:
```
Assertion failed: detected double lock for 'm' in src/test/sync_tests.cpp:40 (in thread ''), details in debug log.
```
ACKs for top commit:
jonasschnelli:
utACK db058efeb0
ajtowns:
ACK db058efeb0
hebasto:
ACK db058efeb0, tested on Linux Mint 20 (x86_64).
Tree-SHA512: 452ddb9a14e44bb174135b39f2219c76eadbb8a6c0e80d64a25f995780d6dbc7b570d9902616db94dbfabaee197b5828ba3475171a68240ac0958fb203a7acdb
