Adds an error output parameter to all GetReservedDestination functions
so that callers can get the actual reason that a change address could
not be fetched. This more closely matches GetNewDestination. This allows
for more granular error messages, such as one that indicates that
bech32m addresses cannot be generated yet.
If a transaction as a segwit output, use a bech32m change address if
they are available. If not, fallback to bech32. If bech32 change
addresses are unavailable, fallback to the default address type.
Bech32m addresses need their own OutputType
We are not ready to create DescriptorScriptPubKeyMans which produce
bech32m addresses. So don't allow generating them.
458a345b05 Add support for SIGHASH_DEFAULT in RPCs, and make it default (Pieter Wuille)
c0f0c8eccb tests: check spending of P2TR (Pieter Wuille)
a2380127e9 Basic Taproot signing logic in script/sign.cpp (Pieter Wuille)
49487bc3b6 Make GetInputUTXO safer: verify non-witness UTXO match (Pieter Wuille)
fd3f6890f3 Construct and use PrecomputedTransactionData in PSBT signing (Pieter Wuille)
5cb6502ac5 Construct and use PrecomputedTransactionData in SignTransaction (Pieter Wuille)
5d2e22437b Don't nuke witness data when signing fails (Pieter Wuille)
ce9353164b Permit full precomputation in PrecomputedTransactionData (Pieter Wuille)
e841fb503d Add precomputed txdata support to MutableTransactionSignatureCreator (Pieter Wuille)
a91d532338 Add CKey::SignSchnorr function for BIP 340/341 signing (Pieter Wuille)
e77a2839b5 Use HandleMissingData also in CheckSchnorrSignature (Pieter Wuille)
dbb0ce9fbf Add TaprootSpendData data structure, equivalent to script map for P2[W]SH (Pieter Wuille)
Pull request description:
Builds on top of #22051, adding signing support after derivation support.
Nothing is changed in descriptor features. Signing works for key path and script path spending, through the normal sending functions, and PSBT-based RPCs. However, PSBT usability is rather low as no extensions have been defined to convey Taproot-specific information, so all script information must be known to the signing wallet.
ACKs for top commit:
achow101:
re-ACK 458a345b05
fjahr:
Code review ACK 458a345b05
Sjors:
ACK 458a345b05
Tree-SHA512: 30ed212cf7754763a4a81624ebc084c51727b8322711ac0b390369213c1a891d367ed8b123882ac08c99595320c11ec57ee42304ff22a69afdc3d1a0d55cc711
f5ba424cd4 wallet: Add IsAddressUsed / SetAddressUsed methods (Russell Yanofsky)
62252c95e5 interfaces: Stop exposing wallet destdata to gui (Russell Yanofsky)
985430d9b2 test: Add gui test for wallet receive requests (Russell Yanofsky)
Pull request description:
Stop giving GUI access to destdata rows in database. Replace with narrow API just for saving and reading receive request information.
This simplifies code and should prevent the GUI from interfering with other destdata like address-used status. It also adds some more GUI test coverage.
There are no changes in behavior.
ACKs for top commit:
jarolrod:
tACK f5ba424cd4
laanwj:
Code review ACK f5ba424cd4
Tree-SHA512: 5423df4786e537a59013cb5bfb9e1bc29a7ca4b8835360c00cc2165a59f925fdc355907a4ceb8bca0285bb4946ba235bffa7645537a951ad03fd3b4cee17b6b0
c7bd5842e4 MOVEONLY: CWallet transaction code out of wallet.cpp/.h (Russell Yanofsky)
Pull request description:
This commit just moves function without making any changes. It can be reviewed with `git log -p -n1 --color-moved=dimmed_zebra`
Motivation for this change is to make `wallet.cpp/h` less monolithic and start to make wallet transaction state tracking comprehensible so bugs in https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Transaction-Conflict-Tracking can be fixed safely without introducing new problems.
This moves wallet classes and methods that deal with transactions out of `wallet.cpp/.h` into better organized files:
- `transaction.cpp/.h` - CWalletTx and CMerkleTx class definitions
- `receive.cpp/.h` - functions checking received transactions and computing balances
- `spend.cpp/.h` - functions creating transactions and finding spendable coins
After #20773, when loading is separated from syncing it will also be possible to move more `wallet.cpp/.h` functions to:
- `sync.cpp/.h` - functions handling chain notifications and rescanning
This commit arranges `receive.cpp` and `spend.cpp` functions in dependency order so it's possible to skim `receive.cpp` and get an idea of how computing balances works, and skim `spend.cpp` and get an idea of how transactions are created, without having to jump all over `wallet.cpp` where functions are not in order and there is a lot of unrelated code.
Followup commit "refactor: Detach wallet transaction methods" in https://github.com/bitcoin/bitcoin/pull/21206 follows up this PR and tweaks function names and arguments to reflect new locations. The two commits are split into separate PRs because this commit is more work to maintain and less work to review, while the other commit is less work to maintain and more work to review, so hopefully this commit can be merged earlier.
ACKs for top commit:
Sjors:
re-utACK c7bd5842e4
fjahr:
utACK c7bd5842e4
promag:
Code review ACK c7bd5842e4, verified move only claim.
meshcollider:
Dimmed-zebra-check and functional test run ACK c7bd5842e4
Tree-SHA512: 4981de6911cb1196774db375494355cc9af59b52456129c002d264a77cd9ed6175f8ecbb6b2f492a59a4d5a0def21a39d96fa79c9f4d99be0992985f553be32f
This commit just moves functions without making any changes. It can be
reviewed with `git log -p -n1 --color-moved=dimmed_zebra`
Motivation for this change is to make wallet.cpp/h less monolithic and
start to make wallet transaction state tracking comprehensible so bugs
in
https://github.com/bitcoin-core/bitcoin-devwiki/wiki/Wallet-Transaction-Conflict-Tracking
can be fixed safely without introducing new problems.
This commit moves wallet classes and methods that deal with transactions
out of wallet.cpp/.h into better organized files:
- transaction.cpp/.h - CWalletTx and CMerkleTx class definitions
- receive.cpp/.h - functions checking received transactions and computing balances
- spend.cpp/.h - functions creating transactions and finding spendable coins
After #20773, when loading is separated from syncing it will also be
possible to move more wallet.cpp/.h functions to:
- sync.cpp/.h - functions handling chain notifications and rescanning
This commit arranges receive.cpp and spend.cpp functions in dependency
order so it's possible to skim receive.cpp and get an idea of how
computing balances works, and skim spend.cpp and get an idea of how
transactions are created, without having to jump all over wallet.cpp
where functions are not in order and there is a lot of unrelated code.
Followup commit "refactor: Detach wallet transaction methods" in
https://github.com/bitcoin/bitcoin/pull/21206 follows up this PR and
tweaks function names and arguments to reflect new locations. The two
commits are split into separate PRs because this commit is more work to
maintain and less work to review, while the other commit is less work to
maintain and more work to review, so hopefully this commit can be merged
earlier.
e6fe1c37d0 rpc: Improve avoidpartialspends and avoid_reuse documentation (Fabian Jahr)
8f073076b1 wallet: Increase OUTPUT_GROUP_MAX_ENTRIES to 100 (Fabian Jahr)
Pull request description:
Follow-up to #17824.
This increases OUTPUT_GROUP_MAX_ENTRIES to 100 which means that OutputGroups will now be up to 100 outputs large, up from previously 10. The main motivation for this change is that during the PR review club on #17824 [several participants signaled](https://bitcoincore.reviews/17824.html#l-339) that 100 might be a better value here.
I think fees should be manageable for users but more importantly, users should know what they can expect when using the wallet with this configuration, so I also tried to clarify the documentation on `-avoidpartialspends` and `avoid_reuse` a bit. If there are other additional ways how or docs where users can be made aware of the potential consequences of using these parameters, please let me know. Another small upside is that [there seem to be a high number of batching transactions with 100 and 200 inputs](https://miro.medium.com/max/3628/1*sZ5eaBSbsJsHx-J9iztq2g.png)([source](https://medium.com/@hasufly/an-analysis-of-batching-in-bitcoin-9bdf81a394e0)) giving these transactions a bit of a larger anonymity set, although that is probably a very weak argument.
ACKs for top commit:
jnewbery:
ACK e6fe1c37d0
Xekyo:
retACK e6fe1c37d0
rajarshimaitra:
tACK `e6fe1c3`
achow101:
ACK e6fe1c37d0
glozow:
code review ACK e6fe1c37d0
Tree-SHA512: 79685c58bafa64ed8303b0ecd616fce50fc9a2b758aa79833e4ad9f15760e09ab60c007bc16ab4cbc4222e644cfd154f1fa494b0f3a5d86faede7af33a6f2826
51a3ac242c Have OutputGroup determine the value to use (Andrew Chow)
6d6d278475 Change SelectCoins_test to actually test SelectCoins (Andrew Chow)
9d3bd74ab4 Remove CreateTransaction while loop and some related variables (Andrew Chow)
6f0d5189af Remove use_bnb and bnb_used (Andrew Chow)
de26eb0e1f Do both BnB and Knapsack coin selection in SelectCoinsMinConf (Andrew Chow)
01dc8ebda5 Have KnapsackSolver actually use effective values (Andrew Chow)
bf26e018de Roll static tx fees into nValueToSelect instead of having it be separate (Andrew Chow)
cc3f14b27c Move output reductions for fee to after coin selection (Andrew Chow)
d97d25d950 Make cost_of_change part of CoinSelectionParams (Andrew Chow)
af5867c896 Move some calculations to common code in SelectCoinsMinConf (Andrew Chow)
1bf4a62cb6 scripted-diff: rename some variables (Andrew Chow)
Pull request description:
Changes `KnapsackSolver` to use effective values instead of just the nominal txout value. Since fees are taken into account during the selection itself, we finally get rid of the `CreateTransaction` loop as well as a few other things that only were only necessary because of that loop.
This should not change coin selection behavior at all (except maybe remove weird edge cases that were caused by the loop). In order to keep behavior the same, `KnapsackSolver` will select outputs with a negative effective value (as it did before).
ACKs for top commit:
ryanofsky:
Code review ACK 51a3ac242c. Looks good to go!
instagibbs:
review ACK 51a3ac242c
meshcollider:
re-light-utACK 51a3ac242c
Tree-SHA512: 372c27e00edcd5dbf85177421ba88f20bfdaf1791b6e3dc022c44876ecc379403e2375ed69e71c512c49e6af87641001ff385c4b25ab93684b3a08a53bf3824e
Instead of hijacking the effective_feerate to use the correct value
during coin selection, have OutputGroup be aware of whether we are
subtracting the fee from the outputs and provide the correct value to
use for selection.
To do this, OutputGroup now takes CoinSelectionParams and has a new
function GetSelectionAmount().
Remove the CreateTransaction while loop. Removes variables that were
only needed because of that loop. Also renames a few variables and
moves their declarations to where they are used.
Some subtractFeeFromOutputs handling is moved to after coin selection
in order to reduce their amounts once the fee is known.
If subtracting the fee reduces the change to dust, we will also now
remove the change output
Although the CreateTransaction loop currently remains, it should be
largely unused. KnapsackSolver will now account for transaction fees
when doing its selection.
In the previous commit, SelectCoinsMinConf was refactored to have some
calculations become shared for KnapsackSolver and SelectCoinsBnB. In
this commit, KnapsackSolver will now use the not_input_fees and
effective_feerate so that it include the fee for non-input things
(excluding a change output) so that the algorithm will select enough to
cover those fees. This is necessary for selecting on effective values.
Additionally, the OutputGroups
created for KnapsackSolver will actually have their effective values
calculated and set, and KnapsackSolver will do its selection on those
effective values.
Lastly, SelectCoins is modified to use the same value for preselected
inputs for BnB and KnapsackSolver. While it will still use the real
value when subtracting the fee from outputs, this behavior will be
the same regardless of the algo used for selecting additional inputs.
The fees for transaction overhead and recipient outputs are now included
in nTargetValue instead of being a separate parameter. For the coin
selection algorithms, it doesn't matter that these are separate as in
either case, the algorithm needs to select enough to cover these fees.
Note that setting nValueToSelect is changed as it now includes
not_input_fees. Without the change to how nValueToSelect is increased
for KnapsackSolver, this would result in overpaying fees. The change to
increase by the difference between nFeeRet and not_input_fees allows
this to have the same behavior as previously.
Additionally, because we assume that KnapsackSolver will always find a
solution that requires change (we assume that BnB always finds a
non-change solution), we also include the fee for the change output in
KnapsackSolver's target. As part of this, we also use the changeless
nFeeRet when iterating for KnapsackSolver. This is because we include
the change fee when doing KnapsackSolver, so nFeeRet on further
iterations won't include the change fee.
Simplifies CreateTransactionInternal without changing behavior. Removes
the pick_new_inputs variable by moving the subtract fee from amount
implementation to later in the loop to where it is possible to calculate
the fee for the transaction. This allows the fee to be subtracted from
the outputs within a single iteration, instead of calculating the fee in
the first iteration, and subtracting the fee in the second.
This also removes another scenario where a second iteration of the loop
finds a smaller input set (and thus smaller fees than the first
iteration) with no change and so a third iteration of the loop is done in order to make
a change output that contains the excess fees.
To handle these cases, we always create a change output which contains
the difference between selected input values and the recipient amounts.
Once the transaction fee is calculated, the change output is reduced (in
the normal case) or the recipient amounts are reduced (in the subtract
fee from amount case). All of this is done in a single iteration of the
loop.
This commit does not change behavior, it just moves code from
CWallet::CreateWalletFromFile to CWallet:::AttachChain so it can be updated in
the next commit.
This commit is most easily reviewed with
"git diff -w --color-moved=dimmed_zebra" or by diffing CWallet:::AttachChain
against the previous code with an external diff tool.
To prepare for KnapsackSolver to use effective values, these
calculations are moved out of the BnB if block to allow for them to be
shared with KnapsackSolver in the future.
The fOnlySafe argument to AvailableCoins is now redundant, since #21359
added a similar field inside the CCoinControl struct.
Not all code paths set a CCoinControl instance, but when it's missing we
can default to using only safe inputs which is backwards-compatible.
11d6459b6e rpc: include_unsafe option for fundrawtransaction (t-bast)
Pull request description:
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning nodes using anchor outputs) are very limited if they can only use safe inputs.
I also added this option to `send` and `walletcreatefundedpsbt` who internally delegate to `fundrawtransaction`.
Fixes#21299
ACKs for top commit:
laanwj:
Code review ACK 11d6459b6e
Tree-SHA512: 5e542a4febcfd6f41cf784678ff02ec9282eae2082c274983f72c5ea87b7ebbe1bd5fdc6a020d7a9d5996157754eb4966b8aeb6c1ceebf0b1519f735579b8bac
d66f283ac0 scripted-diff: Replace three dots with ellipsis in the UI strings (Hennadii Stepanov)
Pull request description:
This PR is split from #21463.
The change was suggested on [Transifex.com](https://www.transifex.com/bitcoin/bitcoin/), and it does not touch `LogPrint` and `LogPrintf` calls.
The only comment on #21463 [was](9030e4b5a6 (r597220100)):
> Mind that these messages also end up in the log. In principle the log is already UTF-8 (as are all strings and text in bitcoind). But, just noting, that it might make browsing the log a less pleasant experience on systems with misconfigured locale like some BSDs by default.
ACKs for top commit:
laanwj:
ACK d66f283ac0
Tree-SHA512: 5ab1cb3160f3f996f1ad7d7486662da3eb7f06a857f4a1874963ce10caed5b86b0ad6151b1b9ebeb2b8aa5f0c85efad3b768ea9cafe5db86f78f88912b756d1e
Allow RPC users to opt-in to unsafe inputs when funding a raw transaction.
Applications that need to manage a complex RBF flow (such as lightning
nodes using anchor outputs) are very limited if they can only use safe inputs.
Fixes#21299
Rather than 3 different messages that are confusing / leak
implementation details, use a single message, that is similar to other
wallet related messages. i.e:
"Compiled without sqlite support (required for descriptor wallets)".
ebc4ab721b refactor: post Optional<> removal cleanups (fanquake)
57e980d13c scripted-diff: remove Optional & nullopt (fanquake)
Pull request description:
Same rationale & motivation as #21404, which turned out to be quite low in the number of potential conflicts. Lets see what the bot has to say here.
ACKs for top commit:
practicalswift:
cr ACK ebc4ab721b: patch looks correct
jnewbery:
utACK ebc4ab721b
laanwj:
Code review ACK ebc4ab721b
Tree-SHA512: 550fbeef09b9d35ddefaa805d1755c18c8fd499c4b0f77ebfece8c20296a7abd1cf6c699e2261f92fe3552deeb7555ec2a2287ffe3ab9e98bb9f8612a4d43be3
f9cd2bfbcc Rename CoinSelectionParams::effective_fee to m_effective_feerate (Andrew Chow)
bdd0c2934b wallet: Move discard feerate fetching to CreateTransaction (Andrew Chow)
448d04b931 wallet: Move long term feerate setting to CreateTransaction (Andrew Chow)
e2f429e6bb wallet: Replace nFeeRateNeeded with effective_fee (Andrew Chow)
1a6a0b0dfb wallet: Use existing feerate instead of getting a new one (Andrew Chow)
Pull request description:
During coin selection, there are various places where we need to have a feerate. We need the feerate for the transaction itself, the discard fee rate, and long term feerate. Fetching these each time we need them can lead to a race condition where two feerates that should be the same are actually different. One particular instance where this can happen is during the loop in `CreateTransactionInternal`. After inputs are chosen, the expected transaction fee is calculated using a newly fetched feerate. If `pick_new_inputs == false`, the loop will go again with the assumption that the fee for the transaction remains the same. However because the feerate is fetched again, it is possible that it actually isn't and this causes coin selection to fail.
Instead of fetching the feerate each time it is needed, we fetch them all at once at the top of `CreateTransactionInternal`, store them in `CoinSelectionParams`, and use them where needed.
While some of these fee rates probably don't need this caching, I've done it for consistency and the guarantee that they remain the same.
Fixes#19229
ACKs for top commit:
glozow:
reACK f9cd2bfbcc
fjahr:
Code review re-ACK f9cd2bfbcc
Xekyo:
tACK f9cd2bfbcc
meshcollider:
Code review + test run ACK f9cd2bfbcc
Tree-SHA512: be83ff64ba473c3cdd3469c812e214659b6e2a9584c22ed2b1595618fce0d4b35d0901e61068cd1069fc1a8fb911db01dd7312d05c3b8cbafbe2504ab7a3e863
Instead of fetching the discard feerate for each SelectCoinsMinConf
iteration, fetch and cache it once during CreateTransaction so that it
is shared for each SelectCoinsMinConf through
coin_selection_params.m_discard_feerate.
Does not change behavior.
Instead of setting the long term feerate for each SelectCoinsMinConf
iteration, set it once during CreateTransaction and let it be shared
with each SelectCoinsMinConf through
coin_selection_params.m_long_term_feerate.
Does not change behavior.
Make sure that all fee calculations use the same feerate.
coin_selection_params.effective_fee is the variable we use for all fee
calculations, so get rid of remaining nFeeRateNeeded usages and just
directly set coin_selection_params.effective_fee.
Does not change behavior.
During each loop of CreateTransaction, instead of constantly getting a
new feerate, use the feerate that we have already fetched for all
fee calculations. Thix fixes a race condition where the feerate required
changes during each iteration of the loop.
This commit changes behavior as the "Fee estimation failed" error will
now take priority over "Signing transaction failed".
fa4e088cba wallet: Mark replaced tx to not be in the mempool anymore (MarcoFalke)
Pull request description:
The wallet does not mark the replaced tx as out-of-mempool. This causes failures in user scripts, because later RPCs may depend on this state change from `bumpfee`.
For example, the following might fail on current master:
```
txid = sendtoaddress(...)
bumpfee(txid)
abandontransaction(txid) # fails because txid is still marked as "in mempool"
```
Fixes#18831
ACKs for top commit:
meshcollider:
utACK fa4e088cba
ryanofsky:
Code review ACK fa4e088cba, and previous ACK faeedff5c87091fd83d2fb2b29eb49c948363f29 is also still valid in case there's a preference for the original fix
Tree-SHA512: 9858f40f5fb5a43a7b584b5c4268b6befa82e6a84583be5206fe721bcb6c255e8d35479d347d0b9aed72703df49887c02b14ab680e8efdd28b90dd6b93d9439a
48a0319bab Add a test that selects too large if BnB is used (Andrew Chow)
3e69939b78 Fail if maximum weight is too large (Andrew Chow)
51e2cd322c Have CalculateMaximumSignedTxSize also compute tx weight (Andrew Chow)
Pull request description:
Currently the `Transaction too large` is calculated on the transaction that is returned from `CreateTransaction`. This does not make sense for when `CreateTransaction` is being used for `fundrawtransaction` as no signing occurs so the final returned transaction is missing signatures. Thus users may successfully fund a transaction but fail to broadcast it after it has been fully signed.
So instead we should figure out whether the transaction we are funding will be too large after it is signed. We can do this by having `CalculateMaximumSignedTxSize` also return the transaction weight and then comparing that weight against the maximum weight.
ACKs for top commit:
instagibbs:
ACK 48a0319bab
meshcollider:
utACK 48a0319bab
Xekyo:
utACK with nits 48a0319bab
Tree-SHA512: 1700c60b07f67e2d5c591c5ccd131ac9f1861fab3def961c3c9c4b3281ec1063fe8e4f0f7f1038cac72692340856406bcee8fb45c8104d2ad34357a0ec878ac7
This simplifies code and adds a less cumbersome interface for accessing
address used information than CWallet AddDestData / EraseDestData /
GetDestData methods.
There is no change in behavior. Lower-level walletdb DestData methods
are also still available and not affected by this change. If there is
interest in consolidating destdata logic more and making it internal to
walletdb, #18608 could be considered as a followup.
Stop giving GUI access to destdata rows in database. Replace with narrow
API just for saving and reading receive request information.
This simplifies code and should prevent the GUI from interfering with
other destdata like address-used status.
Note: No user-visible behavior is changing in this commit. New
CWallet::SetAddressReceiveRequest() implementation avoids a bug in
CWallet::AddDestData() where a modification would leave the previous
value in memory while writing the new value to disk. But it doesn't
matter because the GUI doesn't currently expose the ability to modify
receive requests, only to add and erase them.
5d4597666d Rewrite OutputGroups to be clearer and to use scriptPubKeys (Andrew Chow)
f6b3052739 Explicitly filter out partial groups when we don't want them (Andrew Chow)
416d74fb16 Move OutputGroup positive only filtering into Insert (Andrew Chow)
d895e98b59 Move EligibleForSpending into GroupOutputs (Andrew Chow)
99b399aba5 Move fee setting of OutputGroup to Insert (Andrew Chow)
6148a8acda Move GroupOutputs into SelectCoinsMinConf (Andrew Chow)
2acad03657 Remove OutputGroup non-default constructors (Andrew Chow)
Pull request description:
Even after #17458, we still deal with setting fees of an `OutputGroup` and filtering the `OutputGroup` outside of the struct. We currently make all of the `OutputGroup`s in `SelectCoins` and then copy and modify them within each `SelectCoinsMinConf` scenario. This PR changes this to constructing the `OutputGroup`s within the `SelectCoinsMinConf` so that the scenario can be taken into account during the group construction. Furthermore, setting of fees and filtering for effective value is moved into `OutputGroup::Insert` itself so that we don't add undesirable outputs to an `OutputGroup` rather than deleting them afterwards.
To facilitate fee calculation and effective value filtering during `OutputGroup::Insert`, `OutputGroup` now takes the feerates in its constructor and computes the fees and effective value for each output during `Insert`.
While removing `OutputGroup`s in accordance with the `CoinEligibilityFilter` still requires creating the `OutputGroup`s first, we can do that within the function that makes them - `GroupOutput`s.
ACKs for top commit:
Xekyo:
Code review ACK: 5d4597666d
fjahr:
Code review ACK 5d4597666d
meshcollider:
Light utACK 5d4597666d
Tree-SHA512: 35965b6d49a87f4ebb366ec4f00aafaaf78e9282481ae2c9682b515a3a9f2cbcd3cd6e202fee29489d48fe7f3a7cede4270796f5e72bbaff76da647138fb3059
This adds better test coverage and will make it easier in #20744 to remove our dependency on the two-argument boost::filesystem::absolute() function which does not have a direct equivalent in C++17.
faa8f68943 Replace boost::variant with std::variant (MarcoFalke)
Pull request description:
Now that we can use std::variant from the vanilla standard library, drop the third-party boost variant dependency
ACKs for top commit:
fjahr:
Code review ACK faa8f68943
fanquake:
ACK faa8f68943
Tree-SHA512: 6e3aecd33b00c2e31a763f999247944d5b2ce5e3018f1965c516c1000cd08ff6703a8d50fb0be64883153da2925ae72986b8a6b96586db74057bd05d6f4986e6
31b136e580 Don't declare de facto const reference variables as non-const (practicalswift)
1c65c075ee Don't declare de facto const member functions as non-const (practicalswift)
Pull request description:
_Meta: This is the second and final part of the `const` refactoring series (part one: #20581). **I promise: no more refactoring PRs from me in a while! :)** I'll now go back to focusing on fuzzing/hardening!_
Changes in this PR:
* Don't declare de facto const member functions as non-const
* Don't declare de facto const reference variables as non-const
Awards for finding candidates for the above changes go to:
* `clang-tidy`'s [`readability-make-member-function-const`](https://clang.llvm.org/extra/clang-tidy/checks/readability-make-member-function-const.html) check ([list of `clang-tidy` checks](https://clang.llvm.org/extra/clang-tidy/checks/list.html))
* `cppcheck`'s `constVariable` check ([list of `cppcheck` checks](https://sourceforge.net/p/cppcheck/wiki/ListOfChecks/))
See #18920 for instructions on how to analyse Bitcoin Core using Clang Static Analysis, `clang-tidy` and `cppcheck`.
ACKs for top commit:
ajtowns:
ACK 31b136e580
jonatack:
ACK 31b136e580
theStack:
ACK 31b136e580❄️
Tree-SHA512: f58f8f00744219426874379e9f3e9331132b9b48e954d24f3a85cbb858fdcc98009ed42ef7e7b4619ae8af9fc240a6d8bfc1c438db2e97b0ecd722a80dcfeffe
cc3044ccdb fix misleading comment about call to non-existing function (pox)
Pull request description:
The comment seems to be describing the subsequent call to `SyncTransaction` but refers to it as `SyncNotifications`, which is not any function currently in the codebase.
It's best to just remove the "what" aspect of the comment and focus on the "why", which also reduces the risk of similar documentation errors in the future, in case the function ever gets renamed, for example.
ACKs for top commit:
laanwj:
ACK cc3044ccdb
Tree-SHA512: 882ff17836ef585a603dc504f3dd21f56f682e49b28a0998f23fd16025826fbb083b7978db3ee70d0e0ff2c86fd6c3fd99a2361e5d45c765fdc5822c5f14c0a7
fac39c1983 wallet: document that tx in CreateTransaction is purely an out-param (MarcoFalke)
faac31521b Remove unused and confusing CTransaction constructor (MarcoFalke)
Pull request description:
The constructor is confusing and dangerous (as explained in the TODO), fix that by removing it.
ACKs for top commit:
laanwj:
Code review ACK fac39c1983
promag:
Code review ACK fac39c1983.
theStack:
Code review ACK fac39c1983
Tree-SHA512: e0c8cffce8d8ee0166b8e1cbfe85ed0657611e26e2af0d69fde70eceaa5d75cbde3eb489af0428fe4fc431360b4c791fb1cc21b8dee7d4c7a4f17df00836229d
Rewrite OutputGroups so that the logic is easier to follow and
understand.
There is a slight behavior change as OutputGroups will be grouped by
scriptPubKey rather than CTxDestination as before. This should have no
effect on users as all addresses are a CTxDestination. However by using
scriptPubKeys, we can correctly group outputs which fall into the
NoDestination case. But we also shouldn't have any NoDestination
outputs.
9b74461fa2 refactor: Assert before dereference in CWallet::GetDatabase (João Barbosa)
021feb3187 refactor: Drop redudant CWallet::GetDBHandle (João Barbosa)
Pull request description:
ACKs for top commit:
achow101:
Code Review ACK 9b74461fa2
meshcollider:
utACK 9b74461fa2
ryanofsky:
Code review ACK 9b74461fa2. Changes since last review: rebasing due to conflict, dropping wallet path commit c6a5cd7a64c78b162f545a3467d0fea7dcaadfcc as suggested in discussion, making GetDatabase() const in the earlier commit. Giving more descriptive title like
Tree-SHA512: 68cf3b5e9fe0acb3a5cd081086629989f213f1904cc344e5775767b56759a7d905b1e1c303afbe40f172ff81bf07f3719b59d8f6ec2de3fdd53cd0e2d220fb25
Our max weight check in CreateTransaction only worked if the transaction
was fully signed. However if we are funding a transaction, it is
possible that the tx weight will be too large for a standard tx. In that
case, we should also fail. So we use the tx weight returned by
CalculateMaximumSignedTxSize and check against the limit for those
transactions.
3eb6f8b2e6 wallet (not for backport): improve upgradewallet error messages (Jon Atack)
ca8cd893bb wallet: fix and improve upgradewallet error responses (Jon Atack)
99d56e3571 wallet: fix and improve upgradewallet result responses (Jon Atack)
2498b04ce8 Don't upgrade to HD split if it is already supported (Andrew Chow)
c46c18b788 wallet: refactor GetClosestWalletFeature() (Jon Atack)
Pull request description:
This follows up on #18836 and #20282 to fix and improve the as-yet unreleased `upgradewallet` feature and also implement review follow-up in https://github.com/bitcoin/bitcoin/pull/18836#discussion_r519328607.
This PR fixes 4 upgradewallet issues:
- this bug: https://github.com/bitcoin/bitcoin/pull/20403#discussion_r526063920
- it returns nothing in the absence of an RPC error, which isn't reassuring for users
- it returns the same thing both in the case of a successful upgrade and when no upgrade took place
- the error message object is currently dead code
This PR fixes the above and provides:
...user feedback to not silently return without upgrading
```
{
"wallet_name": "disable private keys",
"previous_version": 169900,
"current_version": 169900,
"result": "Already at latest version. Wallet version unchanged."
}
```
...better feedback after successfully upgrading
```
{
"wallet_name": "watch-only",
"previous_version": 159900,
"current_version": 169900,
"result": "Wallet upgraded successfully from version 159900 to version 169900."
}
```
...helpful error responses
```
{
"wallet_name": "blank",
"previous_version": 169900,
"current_version": 169900,
"error": "Cannot downgrade wallet from version 169900 to version 159900. Wallet version unchanged."
}
{
"wallet_name": "blank",
"previous_version": 130000,
"current_version": 130000,
"error": "Cannot upgrade a non HD split wallet from version 130000 to version 169899 without upgrading to support pre-split keypool. Please use version 169900 or no version specified."
}
```
updated help:
```
upgradewallet ( version )
Upgrade the wallet. Upgrades to the latest version if no version number is specified.
New keys may be generated and a new wallet backup will need to be made.
Arguments:
1. version (numeric, optional, default=169900) The version number to upgrade to. Default is the latest wallet version.
Result:
{ (json object)
"wallet_name" : "str", (string) Name of wallet this operation was performed on
"previous_version" : n, (numeric) Version of wallet before this operation
"current_version" : n, (numeric) Version of wallet after this operation
"result" : "str", (string, optional) Description of result, if no error
"error" : "str" (string, optional) Error message (if there is one)
}
```
ACKs for top commit:
achow101:
ACK 3eb6f8b
MarcoFalke:
review ACK 3eb6f8b2e6 🛡
Tree-SHA512: b767314069e26b5933b123acfea6aa40708507f504bdb22884da020a4ca1332af38a7072b061e36281533af9f4e236d94d3c129daf6fe5b55241127537038eed
05e82d86b0 wallet: override minfee checks (fOverrideFeeRate) for fee_rate (Jon Atack)
9a670b4f07 wallet: update sendtoaddress, send RPC examples with fee_rate (Jon Atack)
be481b72e2 wallet: use MIN_RELAY_TX_FEE in bumpfee help (Jon Atack)
449b730579 wallet: provide valid values if invalid estimate mode passed (Jon Atack)
6da3afbaee wallet: update remaining rpcwallet fee rate units to BTC/kvB (Jon Atack)
173b5b5fe0 wallet: update fee rate units, use sat/vB for fee_rate error messages (Jon Atack)
7f9835a05a wallet: remove fee rates from conf_target helps (Jon Atack)
b7994c01e9 wallet: add fee_rate unit warnings to bumpfee (Jon Atack)
410e471fa4 wallet: remove redundant bumpfee fee_rate checks (Jon Atack)
a0d4957473 wallet: introduce fee_rate (sat/vB) param/option (Jon Atack)
e21212f01b wallet: remove unneeded WALLET_BTC_KB_TO_SAT_B constant (Jon Atack)
6112cf20d4 wallet: add CFeeRate ctor doxygen documentation (Jon Atack)
3f72791613 wallet: fix bug in RPC send options (Jon Atack)
Pull request description:
This PR builds on #11413 and #20220 to address #19543.
- replace overloading the conf_target and estimate_mode params with `fee_rate` in sat/vB in the sendtoaddress, sendmany, send, fundrawtransaction, walletcreatefundedpsbt, and bumpfee RPCs
- allow non-actionable conf_target value of `0` and estimate_mode value of `""` to be passed to use `fee_rate` as a positional argument, in addition to as a named argument
- fix a bug in the experimental send RPC described in https://github.com/bitcoin/bitcoin/pull/20220#discussion_r513789526 where args were not being passed correctly into the options values
- update the feerate error message units for these RPCs from BTC/kB to sat/vB
- update the test coverage, help docs, doxygen docs, and some of the RPC examples
- other changes to address the excellent review feedback
See this wallet meeting log for more context: http://www.erisian.com.au/bitcoin-core-dev/log-2020-11-06.html#l-309
ACKs for top commit:
achow101:
re-ACK 05e82d8
MarcoFalke:
review ACK 05e82d86b0 did not test and found a few style nits, which can be fixed later 🍯
Xekyo:
tACK 05e82d86b0
Sjors:
utACK 05e82d86b0
Tree-SHA512: a4ee5f184ada53f1840b2923d25873bda88c5a2ae48e67eeea2417a0b35154798cfdb3c147b05dd56bd6608a784e1b91623bb985ee2ab9ef2baaec22206d0a9c
5f9c0b6360 wallet: Remove -upgradewallet from dummywallet (MarcoFalke)
a314271f08 test: Remove unused wallet.dat (MarcoFalke)
bf7635963c tests: Test specific upgradewallet scenarios and that upgrades work (Andrew Chow)
4b418a9dec test: Add test_framework/bdb.py module for inspecting bdb files (Andrew Chow)
092fc43485 tests: Add a sha256sum_file function to util (Andrew Chow)
0bd995aa19 wallet: upgrade the CHDChain version number when upgrading to split hd (Andrew Chow)
8e32e1c41c wallet: remove nWalletMaxVersion (Andrew Chow)
bd7398cc62 wallet: have ScriptPubKeyMan::Upgrade check against the new version (Andrew Chow)
5f720544f3 wallet: Add GetClosestWalletFeature function (Andrew Chow)
842ae3842d wallet: Add utility method for CanSupportFeature (Andrew Chow)
Pull request description:
This PR cleans up the wallet upgrade mechanism a bit, fixes some probably bugs, and adds more test cases.
The `nWalletMaxVersion` member variable has been removed as it made `CanSupportFeature` unintuitive and was causing a couple of bugs. The reason this was introduced originally was to allow a wallet upgrade to only occur when the new feature is first used. While this makes sense for the old `-upgradewallet` option, for an RPC, this does not quite make sense. It's more intuitive for an upgrade to occur if possible if the `upgradewallet` RPC is used as that's an explicit request to upgrade a particular wallet to a newer version. `nWalletMaxVersion` was only relevant for upgrades to `FEATURE_WALLETCRYPT` and `FEATURE_COMPRPUBKEY` both of which are incredibly old features. So for such wallets, the behavior of `upgradewallet` will be that the feature is enabled immediately without the wallet needing to be encrypted at that time (note that `FEATURE_WALLETCRYPT` indicates support for encryption, not that the wallet is encrypted) or for a new key to be generated.
`CanSupportFeature` would previously indicate whether we could upgrade to `nWalletMaxVersion` not just whether the current wallet version supported a feature. While this property was being used to determine whether we should upgrade to HD and HD chain split, it was also causing a few bugs. Determining whether we should upgrade to HD or HD chain split is resolved by passing into `ScriptPubKeyMan::Upgrade` the version we are upgrading to and checking against that. By removing `nWalletMaxVersion` we also fix a bug where you could upgrade to HD chain split without the pre-split keypool.
`nWalletMaxVersion` was also the version that was being reported by `getwalletinfo` which meant that the version reported was not always consistent across restarts as it depended on whether `upgradewallet` was used. Additionally to make the wallet versions consistent with actually supported versions, instead of just setting the wallet version to whatever is given to `upgradewallet`, we normalize the version number to the closest supported version number. For example, if given 150000, we would store and report 139900.
Another bug where CHDChain was not being upgraded to the version supporting HD chain split is also fixed by this PR.
Lastly several more tests have been added. Some refactoring to the test was made to make these tests easier. These tests check specific upgrading scenarios, such as from non-HD (version 60000) to HD to pre-split keypool. Although not specifically related to `upgradewallet`, `UpgradeKeyMetadata` is now being tested too.
Part of the new tests is checking that the wallet files are identical before and after failed upgrades. To facilitate this, a utility function `sha256sum_file` has been added. Another part of the tests is to examine the wallet file itself to ensure that the records in the wallet.dat file have been correctly modified. So a new `bdb.py` module has been added to deserialize the BDB db of the wallet.dat file. This format isn't explicitly documented anywhere, but the code and comments in BDB's source code in file `dbinc/db_page.h` describe it. This module just dumps all of the fields into a dict.
ACKs for top commit:
MarcoFalke:
approach ACK 5f9c0b6360
laanwj:
Code review ACK 5f9c0b6360
jonatack:
ACK 5f9c0b6360, approach seems fine, code review, only skimmed the test changes but they look well done, rebased on current master, debug built and verified the `wallet_upgradewallet.py` test runs green both before and after running `test/get_previous_releases.py -b v0.19.1 v0.18.1 v0.17.2 v0.16.3 v0.15.2`
Tree-SHA512: 7c4ebf420850d596a586cb6dd7f2ef39c6477847d12d105fcd362abb07f2a8aa4f7afc5bfd36cbc8b8c72fcdd1de8d2d3f16ad8e8ba736b6f4f31f133fe5feba
5e146022da wallet: fix scanning progress calculation for single block range (Sebastian Falbesoner)
Pull request description:
If the blockchain is rescanned for a single block (i.e. start and stop hashes are equal, and with that also the estimated start/stop verification progress values) the progress calculation could lead to a NaN value caused by a division by zero (0.0/0.0), resulting in an invalid JSON result for the `getwalletinfo` RPC. This PR fixes this behaviour by setting the progress to zero in that special case. Fixes#20297.
The behaviour can easily be reproduced by continuously running single block rescans in an endless loop, e.g. via
```bash
#!/bin/bash
while true
do
bitcoin-cli rescanblockchain $(bitcoin-cli getblockcount)
done
```
and at the same time perform some `getwalletinfo` RPCs.
On the master branch, this leads to frequent invalid responses (tested on mainchain):
```
$ bitcoin-cli getwalletinfo
error: couldn't parse reply from server
$ curl --user `cat ~/.bitcoin/.cookie` --data-binary '{"jsonrpc": "1.0", "id": "curltest", "method": "getwalletinfo", "params": []}' -H 'content-type: text/plain;' http://127.0.0.1:8332/
{"result":{"walletname":"","walletversion":169900,"format":"bdb","balance":0.00000000,"unconfirmed_balance":0.00000000,"immature_balance":0.00000000,"txcount":0,"keypoololdest":1603677276,"keypoolsize":1000,"hdseedid":"3196e33ecb47c7130e6ca60f2f895f9259860dca","keypoolsize_hd_internal":1000,"paytxfee":0.00000000,"private_keys_enabled":true,"avoid_reuse":false,"scanning":{"duration":0,"progress":},"descriptors":false},"error":null,"id":"curltest"}
```
(note that missing value for "progress" in the JSON result).
On the PR branch, the behaviour doesn't occur anymore.
ACKs for top commit:
MarcoFalke:
review ACK 5e146022da
promag:
Core review ACK 5e146022da.
Tree-SHA512: f0e6aad5a6cd08b36c5fe820fff0ef26663229b39169a4dbe757f3c795a41cf5c69c9dc90efe7515675ae1059307f8971123781a0514d10704123a6f28b125ab
If the blockchain is rescanned for a single block (i.e. start and stop hashes
are equal, and with that also the estimated verification progress) the progress
calculation could lead to a NaN value caused by a division by zero, resulting in
an invalid JSON result for the getwalletinfo RPC. Fixed by setting the progress
to zero in that special case.
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
538be4219a wallet: fix importdescriptor silent fail (Ivan Metlushko)
Pull request description:
Currently `importdescriptor` command will successfully import a descriptor with hardened derivations into a watch-only wallet while silently failing to expand the descriptor to fill the cache. This leads to a broken wallet state and failure to load such wallet due to missing cache on subsequent restart.
ACKs for top commit:
laanwj:
Code review ACK 538be4219a
achow101:
ACK 538be4219a
meshcollider:
utACK 538be4219a
Tree-SHA512: 4bdd0ab4437d55b3f1a79c3a300a0b186089155c020fe220a73d0cce274de47d90371d88918d39fd795f9fccf8db328f1e322d29a6062f9ce94a1c254398f004
bd93fc9945 Fix change detection of imported internal descriptors (Andrew Chow)
Pull request description:
Import internal descriptors were having address book entries added which meant they would be detected as non-change. Fix this and add a test for it.
ACKs for top commit:
laanwj:
Code review ACK bd93fc9945
meshcollider:
utACK bd93fc9945
promag:
Code review ACK bd93fc9945.
Tree-SHA512: 8fa9e364be317627ec171eedffdb505976c0e7f1e55bc7e8cfdffa3aeea5db24d231f55166602cd0e97a5ba621acc871de0a765c75d0c65678f83e93c3b657c5
nWalletMaxVersion was used to allow an upgrade to a version only
when the new feature was used. This makes sense for the old
-upgradewallet startup option. But because upgradewallet is now a RPC,
putting off the version bump like this does not make sense. Instead,
immediately upgrading to the given version number makes sense.
Instead of using CanSupportFeature and relying on nWalletMaxVersion,
take the new version we are upgrading to and use IsSupportedFeature
with that and the previous wallet version.
MakeWalletDatabase no longer has a default DatabaseFormat. Instead
callers, like CWallet::Create, need to specify the database type to
create if the file does not exist. If it exists and NONE is given, then
CreateWalletDatabase will try to autodetect the type.
We never need to open database in read-only mode as it's controlled
separately for every batch.
Also we can safely create database if it doesn't exist already
because require_existing option is verified in MakeDatabase
before creating a new WalletDatabase instance.
Instead of hacking OutputGroup::m_ancestors to discourage the inclusion
of partial groups via the eligibility filter, add a parameter to the
eligibility filter that indicates whether we want to include the group.
Then for those partial groups, don't return them in GroupOutputs if we
indicate they aren't desired.
69cf5d4eeb [test] Make sure send rpc returns fee reason (Sishir Giri)
d5863c0b3e [send] Make send RPCs return fee reason (Sishir Giri)
Pull request description:
Whenever a wallet funds a transaction, the fee reason is reported to the user only if the verbose is set to true. I added an extra parameter to `CreateTransaction` function in wallet.cpp. Then I implemented the fee reason return logic in `SendMoney` in rpcwallet.cpp, followed by verbose parameter in `sendtoaddress` and `sendmany` functions. I also added a fee reason test case in walletbasic.py.
link to the issue: https://github.com/MarcoFalke/bitcoin-core/issues/22#issue-616251578
ACKs for top commit:
instagibbs:
ACK 69cf5d4eeb
meshcollider:
utACK 69cf5d4eeb
Tree-SHA512: 2e3af32dcfbd5511ba95f8bc8edca7acfe709a8430ff03e43172e5d0af3dfa4b2f57906978e7f272d878043b9ed8c6004674cf47d7496b005d5f612e9a58aa0e
OutputGroup will handle the fee and effective value computations
inside of Insert. It now needs to take the effective feerate and long
term feerates as arguments to its constructor.
Using the zmq notifications to avoid excessive mempool polling can be difficult
given the current notifications available. It announces all transactions
being added to mempool or included in blocks, but announces no evictions
and gives no indication if the transaction is in the mempool or a block.
Block notifications for zmq are also substandard, in that it only announces
block tips, while all block transactions are still announced.
This commit adds a unified stream which can be used to closely track mempool:
1) getrawmempool to fill out mempool knowledge
2) if txhash is announced, add or remove from set
based on add/remove flag
3) if blockhash is announced, get block txn list,
remove from those transactions local view of mempool
4) if we drop a sequence number, go to (1)
The mempool sequence number starts at the value 1, and
increments each time a transaction enters the mempool,
or is evicted from the mempool for any reason, including
block inclusion. The mempool sequence number is published
via ZMQ for any transaction-related notification.
These features allow for ZMQ/RPC consumer to track mempool
state in a more exacting way, without unnecesarily polling
getrawmempool. See interface_zmq.py::test_mempool_sync for
example usage.
Although loadwallet() in rpcwallet.cpp assumes LoadWallet() always
assign some value to the 'status', but LoadWallet() does not do so
in some situation.
This fixes above and prevends loadwallet() returns ambiguous error code.
f1ee37319a wallet: Reload previously loaded wallets on GUI startup (Andrew Chow)
Pull request description:
Enable the GUI to also use the load_on_startup feature. Wallets loaded in the GUI always have load_on_startup=true. When they are unloaded from the GUI, load_on_startup=false.
To facilitate this change, UpdateWalletSetting is moved into the wallet module and called from within LoadWallet, RemoveWallet, and Createwallet. This change does not actually touch the GUI code but rather the wallet functions that are shared between the GUI and RPC.
ACKs for top commit:
jonasschnelli:
Tested ACK f1ee37319a - works as expected. Wallets loaded via bitcoin-cli (in `-server` mode) or through the RPC console won't be loaded on startup but wallets loaded via the GUI menu will.
kristapsk:
ACK f1ee37319a, I have tested the code.
Tree-SHA512: f5b44aa763cf761d919015c5fbc0600b72434aa71e3b57007fd7530a29c3da1a9a0c98c4f22cb6cdffba61150a31170056a7d4737625e7b76f6958f3d584da8c
Checks are now consolidated in MakeBerkeleyDatabase function instead of
happening in higher level code.
This commit does not change behavior except for error messages which now
include more complete information.
This removes a source of complexity and indirection that makes it harder to
understand path checking code. Path checks will be simplified in upcoming
commits.
There is no change in behavior in this commit other than a slightly more
descriptive error message in `loadwallet` if the default "" wallet can't be
found. (The error message is improved more in upcoming commit "wallet: Remove
path checking code from loadwallet RPC".)
Enable the GUI to also use the load_on_startup feature.
Wallets loaded in the GUI always have load_on_startup=true.
When they are unloaded from the GUI, load_on_startup=false.
To facilitate this change, UpdateWalletSetting is moved into the wallet
module and called from within LoadWallet, RemoveWallet, and
Createwallet. This change does not actually touch the GUI code but
rather the wallet functions that are shared between the GUI and RPC.
3340dbadd3 Remove -zapwallettxes (Andrew Chow)
Pull request description:
It's not clear what use there is to keeping `-zapwallettxes` given that it's intended usage has been superseded by `abandontransaction`. So this removes it outright.
Alternative to #19700
ACKs for top commit:
meshcollider:
utACK 3340dbadd3
fanquake:
ACK 3340dbadd3 - remaining manpage references will get cleaned up pre-release.
Tree-SHA512: 3e58e1ef6f4f94894d012b93e88baba3fb9c2ad75b8349403f9ce95b80b50b0b4f443cb623cf76c355930db109f491b3442be3aa02972e841450ce52cf545fc8
-zapwallettxes is made a hidden option to inform users that it is
removed and they should be using abandontransaction to do the stuck
transaction thing.
6d1f51343c [rpc] fundrawtransaction, walletcreatefundedpsbt lock manually selected coins (Sjors Provoost)
Pull request description:
When using `fundrawtransaction` and `walletcreatefundedpsbt` with `lockUnspents`, it would only lock automatically selected coins, not manually selected coins. That doesn't make much sense to me if the goal is to prevent accidentally double-spending yourself before you broadcast a transaction.
Note that when creating a transaction, manually selected coins are automatic "unlocked" (or more accurately: the lock is ignored). Earlier versions of this PR introduced an error when a locked coin is manually selected, but this idea was abandoned after some discussion. An application that uses this RPC should either rely on automatic coin selection (with `lockUnspents`) or handle lock concurrency itself with manual coin selection. In particular it needs to make sure to avoid/pause calls with automatic coin selection between calling `lockunspent` and the subsequent spending RPC.
See #7518 for historical background.
ACKs for top commit:
meshcollider:
Code review ACK 6d1f51343c
fjahr:
Code review ACK 6d1f51343c
Tree-SHA512: 8773c788d92f2656952e1beac147ba9956b8c5132d474e0880e4c89ff53642928b4cbfcd1cb3d17798b9284f02618a8830c93a9f7a4733e5bded96adff1d5d4d
772ea4844c wallet: Avoid recursive lock in IsTrusted (João Barbosa)
819f10f671 wallet, refactor: Immutable CWalletTx::pwallet (João Barbosa)
Pull request description:
This change moves `CWalletTx::IsTrusted` to `CWallet` in order to have TSAN. So now `CWallet::IsTrusted` requires `cs_wallet` and the recursive lock no longer happens.
Motivated by https://github.com/bitcoin/bitcoin/pull/19289/files#r473308226.
ACKs for top commit:
meshcollider:
utACK 772ea4844c
hebasto:
ACK 772ea4844c, reviewed and tested on Linux Mint 20 (x86_64).
Tree-SHA512: 702ffd928b2f42a8b90de398790649a5fd04e1ac3877558da928e94cdeb19134883f06c3a73a6826c11c912facf199173375a70200737e164ccaea1bec515b2a
24bf17602c gui refactor: Inline SplashScreen::ConnectWallet (Russell Yanofsky)
e4f4350471 refactor: Move wallet methods out of chain.h and node.h (Russell Yanofsky)
b266b3e0bf refactor: Create interfaces earlier during initialization (Russell Yanofsky)
Pull request description:
Add WalletClient interface so node interface is cleaner and don't need wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate global wallet variables like ::vpwallets in #19101, because createWallet(), loadWallet(), getWallets(), etc methods called by the GUI need a way to get a reference to the list of open wallets if it is no longer a global variable.
ACKs for top commit:
promag:
Code review ACK 24bf17602c.
MarcoFalke:
ACK 24bf17602c🐚
Tree-SHA512: a70d3776cd6723093db8912028c50075ec5fa0a48b961cb1a945f922658f5363754f8380dbb8378ed128c8c858913024f8264740905b8121a35c0d63bfaed7cf
Add WalletClient interface so node interface is cleaner and don't need
wallet-specific methods.
The new NodeContext::wallet_client pointer will also be needed to eliminate
global wallet variables like ::vpwallets, because createWallet(), loadWallet(),
getWallets(), etc methods called by the GUI need a way to get a reference to
the list of open wallets if it is no longer a global variable.
Also tweaks splash screen registration for load wallet events to be delayed
until after wallet client is created.
7f13dfb587 test: test the implicit avoid partial spends functionality (Karl-Johan Alm)
b82067bf69 wallet: try -avoidpartialspends mode and use its result if fees are below threshold (Karl-Johan Alm)
Pull request description:
The `-avoidpartialspends` feature is normally disabled, as it may affect the optimal fee for payments. This PR introduces a new parameter `-maxapsfee` (max avoid partial spends fee) which acts on the following values:
* -1: disable partial spend avoidance completely (do not even try it)
* 0: only do partial spend avoidance if fees are the same or better as the regular coin selection
* 1..∞: use APS variant if the absolute fee difference is less than or equal to the max APS fee
For values other than -1, the code will now try partial spend avoidance once, and if that gives a value within the accepted range, it will use that.
Example: -maxapsfee=0.00001000 means the wallet will do regular coin select, APS coin select, and then pick AKS iff the absolute fee difference is <= 1000 satoshi.
Edit: updated this to reflect the fact we are now using a max fee.
ACKs for top commit:
fjahr:
tested ACK 7f13dfb587
achow101:
ACK 7f13dfb587
jonatack:
ACK 7f13dfb58, code review, debug build, verified the test fails with `AssertionError: not(2 == 1)` for the number of vouts when `-maxapsfee=0.0001` is changed to 0, and verified the new logging with an added assertion.
meshcollider:
Code review ACK 7f13dfb587
Tree-SHA512: 475929df57f6191bb4e36bfbcad5a280a64bb0ecd8767b76cb2e44e2301235d0eb294a3f2fac5bbf15d35d7ecfba47acb2285feadb883c9ce31c08377e3afb3c
9adc2f80fc Refactor OutputGroups to handle effective values, fees, and filtering (Andrew Chow)
7d07e864b8 Use real value when calculating OutputGroup value (Andrew Chow)
Pull request description:
Currently, the effective values and filtering for positive effective values is done outside of the OutputGroup. We should instead have functions in Outputgroup to do this and call those for each OutputGroup. So this PR does that.
This makes future changes for effective values in coin selection much easier.
ACKs for top commit:
instagibbs:
reACK 9adc2f80fc
fjahr:
re-ACK 9adc2f80fc
meshcollider:
Light code review ACK 9adc2f80fc
Tree-SHA512: 7445c94b7295b45bcd83a6f8a5c8f6961a89453fcc856335192d4b4a66aec7724513616b04e5111588ab208c89b311055399d6279cd9c4ce452aefb85f04b64a
e7448d6680 wallet: Don't override signing errors (Fabian Jahr)
Pull request description:
While reviewing #17204 I noticed that the errors in `input_errors` from `::SignTransaction` where being overridden by `CWallet::SignTransaction`. For example, a Script related error led to incomplete signature data which led to `CWallet::SignTransaction` reporting that keys were missing, which was a less precise error than the original one.
Additionally, the error `"Input not found or already spent"` is [duplicated in `sign.cpp`](c7b4968552/src/script/sign.cpp (L481)), so the error here is redundant at the moment. So technically the whole error block could be removed, I think. However, this code is affected by the ongoing work on the wallet so there might be a reason why these errors are here. But even if there is a reason to keep them, I don't think existing, potentially more precise errors should be overridden here unless we want to hide them from the users. I am looking for feedback if this is a work in progress state where these errors could be more useful in the future or if they can be removed.
On testing: even though [the errors in `CWallet` are covered](https://marcofalke.github.io/btc_cov/total.coverage/src/wallet/wallet.cpp.gcov.html), all tests still pass after removing them. I am not sure if there is a desire to cover these specific error messages, tests in `test/functional/rpc_signrawtransaction.py` seem to aim for a more generic approach.
ACKs for top commit:
achow101:
ACK e7448d6680
meshcollider:
Code review ACK e7448d6680
Tree-SHA512: 3e2bc11d05379d2aef87b093a383d1b044787efc70e35955b2f8ecd028b6acef02f386180566af6a1a63193635f5d685466e2f6141c96326c49ffc5c81ca3e23
Instead of having callers set the fees, effective values, and filtering
of outputs, do these within OutputGroups themselves as member functions.
m_fee and m_long_term_fee is added to OutputGroup to track the fees of
the OutputGroup.
