222290f543 test: Set BIP34Height = 2 for regtest (MarcoFalke)
fac90c55be test: Create all blocks with version 4 or higher (MarcoFalke)
Pull request description:
BIP34 is active on the current tip of mainnet, so all miners must obey it. It would be nice if it also was active in fresh regtest instances from the earliest time possible.
I changed the BIP34 height to `2`, so that the block at height=1 may be used to mine a duplicate coinbase. (Needed to test mainnet behaviour)
This pull is done in two commits:
* test: Create all blocks with version 4 or higher:
Now that BIP34 is activated earlier, we need to create blocks with a higher version number. Just bump it to 4 instead of 2 to avoid having to bump it again later.
* test: Set BIP34Height = 2 for regtest:
This fixes the BIP34 implementation in the tests (to match the one of the Core codebase) and updates the tests where needed
ACKs for top commit:
ajtowns:
ACK 222290f543
jonatack:
ACK 222290f543 tested and reviewed rebased to current master 5e213822f8
theStack:
Tested ACK 222290f543
Tree-SHA512: d69c637a62a64b8e87de8c7f0b305823d8f4d115c1852514b923625dbbcf9a4854b5bb3771ff41702ebf47c4c182a4442c6d7c0b9f282c95a34b83e56a73939b
82b6f89819 [style] Small style improvements to DNS parameters (Amiti Uttarwar)
4c89e24f64 [test] Test the delay before querying DNS seeds (Amiti Uttarwar)
6395c8ed56 [test] Test the interactions between -forcednsseed and -dnsseed (Amiti Uttarwar)
6f6b7df6bd [init] Disallow starting up with conflicting paramters for -dnsseed and -forcednsseed (Amiti Uttarwar)
26d0ffe4f2 [test] Test -forcednsseed causes querying DNS seeds (Amiti Uttarwar)
35851450a9 [test] Test the interactions between -connect and -dnsseed (Amiti Uttarwar)
75c05af361 [test] Test logic to query DNS seeds with block-relay-only connections (Amiti Uttarwar)
9c08719778 [test] Introduce test logic to query DNS seeds (Amiti Uttarwar)
Pull request description:
This PR adds a DNS seed to the regtest chain params to enable testing the DNS seed querying logic of `CConnman::ThreadDNSAddressSeed` and relevant startup parameters. Adds coverage for the changes in #22013 (and then some).
The main behavioral change to bitcoind is that this PR disallows starting up with conflicting parameters for `-dnsseed` and `-forcednsseed`.
The tests include:
* parameter interactions of different combinations of `-connect`, `-dnsseed` and `-forcednsseed`
* the delay before querying DNS seeds depending on how many addresses are in the addrman
* the behavior of `-forcednsseed`
* skipping DNS querying if we have outbound full relay connections & not block-relay-only connections
Huge props to mzumsande for identifying the timing technique for testing successful connections before running `ThreadDNSAddressSeed` 🙌🏽
ACKs for top commit:
mzumsande:
ACK 82b6f89819
jnewbery:
reACK 82b6f89819
Tree-SHA512: 9f0c29bfbf99426727e79c0a25606ae09deab91a92e3c5cee7f84c3ca7503a8ac9ab85a85c51841d40b164ef8c991326070f0b2f41d075fb7985df26f6e95d6d
3f7250b328 [test] Use the new endpoint to improve tests (Amiti Uttarwar)
3893da06db [RPC] Add field to getpeerinfo to indicate if addr relay is enabled (Amiti Uttarwar)
0980ca78cd [test] Test that we intentionally select addr relay peers. (Amiti Uttarwar)
c061599e40 [net_processing] Remove RelayAddrsWithPeer function (Amiti Uttarwar)
201e496481 [net_processing] Introduce new field to indicate if addr relay is enabled (Amiti Uttarwar)
1d1ef2db7e [net_processing] Defer initializing m_addr_known (Amiti Uttarwar)
6653fa3328 [test] Update p2p_addr_relay test to prepare (Amiti Uttarwar)
2fcaec7bbb [net_processing] Introduce SetupAddressRelay (Amiti Uttarwar)
Pull request description:
This PR builds on the test refactors extracted into #22306 (first 5 commits).
This PR aims to reduce addr blackholes. When we receive an `addr` message that contains 10 or less addresses, we forward them to 1-2 peers. This is the main technique we use for self advertisements, so sending to peers that wouldn't relay would effectively "blackhole" the trickle. Although we cannot prevent this in a malicious case, we can improve it for the normal, honest cases, and reduce the overall likelihood of occurrence. Two known cases where peers would not participate in addr relay are if they have connected to you as a block-relay-only connection, or if they are a light client.
This implementation defers initialization of `m_addr_known` until it is needed, then uses its presence to decide if the peer is participating in addr relay. For outbound (not block-relay-only) peers, we initialize the filter before sending the initial self announcement when processing their `version` message. For inbound peers, we initialize the filter if/when we get an addr related message (`ADDR`, `ADDRV2`, `GETADDR`). We do NOT initialize the filter based on a `SENDADDRV2` message.
To communicate about these changes beyond bitcoin core & to (try to) ensure that no other software would be disrupted, I have:
- Posted to the [mailing list](https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2021-April/018784.html)
- Researched other open source clients to confirm compatibility, opened issues in all the projects & documented in https://github.com/bitcoin/bitcoin/pull/21528#issuecomment-809906430. Many have confirmed that this change would not be problematic.
- Raised as topic during [bitcoin-core-dev meeting](https://www.erisian.com.au/bitcoin-core-dev/log-2021-03-25.html#l-954)
- Raised as topic during [bitcoin p2p meeting](https://www.erisian.com.au/bitcoin-core-dev/log-2021-04-20.html#l-439)
ACKs for top commit:
jnewbery:
reACK 3f7250b328
glozow:
ACK 3f7250b328
ajtowns:
utACK 3f7250b328
Tree-SHA512: 29069282af684c1cd37d107c395fdd432dcccb11626f3c2dabfe92fdc4c85e74c7c4056fbdfa88017fec240506639b72ac6c311f8ce7c583112eb15f47e421af
607076d01b test: remove confusing `MAX_BLOCK_BASE_SIZE` (Sebastian Falbesoner)
4af97c74ed test: introduce `get_weight()` helper for CBlock (Sebastian Falbesoner)
a084ebe133 test: introduce `get_weight()` helper for CTransaction (Sebastian Falbesoner)
Pull request description:
This is a very late follow-up PR to #10618, which removed the constant `MAX_BLOCK_BASE_SIZE` from the core implementation about four years ago (see also #10608 in why it was considered confusing and superfluous).
Since there is also no point in still keeping it in the functional test framework, the PR switches to weight-based accounting on the relevant test code parts and use `MAX_BLOCK_WEIGHT` instead for the block limit checks. To prepare that, the first two commits introduce `get_weight()` helpers for the classes CTransaction and CBlock, respectively.
ACKs for top commit:
MarcoFalke:
review ACK 607076d01b🚴
Tree-SHA512: d59aa0b6b3dfd0a849b8063e66de275d252f705f99e25cd3bf6daec028b47d946777ee5b42a060f5283cb18e917ac073119c2c0e11bbc21211f69ef0a6ed335a
8a2b58db9e test: fix segwit terminology (s/witness_program/witness_script/) (Sebastian Falbesoner)
Pull request description:
This PR fixes wrong uses of the term "witness program", which according to [BIP141](https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#Witness_program) is defined as follows:
> A scriptPubKey (or redeemScript as defined in BIP16/P2SH) that consists of a 1-byte push opcode (for 0 to 16) followed by a data push between 2 and 40 bytes gets a new special meaning. The value of the first push is called the "version byte". **The following byte vector pushed is called the "witness program".**
In most cases where "witness program" is used in tests (concerns comments, variable names and in one instance even a function name) what we really want to denote is the "witness script". Thanks to [MarcoFalke for pointing this out in a review comment](https://github.com/bitcoin/bitcoin/pull/22363#discussion_r666794261)!
Some historical background: At the time when the P2P segwit tests were first introduced (commit 330b0f31ee, PR #8149), the term "witness program" was not used consistently in BIP141: https://bitcoin.stackexchange.com/questions/46451/what-is-the-precise-definition-of-witness-program
This was fixed in PR https://github.com/bitcoin/bips/pull/416 later.
So in some way, this PR can be seen as a very late follow-up to the BIP141 fix that also reflects these changes in the tests.
ACKs for top commit:
josibake:
tACK 8a2b58db9e
Tree-SHA512: f36bb9e53d1b54b86bfa87ec12f33e3ebca64b5f59d97e9662fe35ba12c25e1c9a4f93a5425d0eaa3879dce9e50368d345555b927bfab76945511f873396892b
When starting up with a populated addrman, ThreadDNSAddressSeed adds a delay
during which time the node may be able to connect to some peers. This commit
tests the delay changes based on the number of addresses in the addrman.
Test that passing conflicting parameters for the two causes a startup error.
This logic also impacts -connect, which soft sets -dnsseed, so add a test for
that too.
When a node is able to properly shutdown, it will persist its block-relay-only
connections to the addrman. On startup, it will attempt to reconnect to these
anchors. Since block-relay-only connections do not participate in ADDR relay,
succesful connections are insufficient to skip querying the DNS seeds.
This test fails prior to the changes in #22013.
Co-authored-by: Martin Zumsande <mzumsande@gmail.com>
This commit introduces a DNS seed to the regest chain params in order to add
coverage to the DNS querying logic.
The first test checks that we do not query DNS seeds if we are able to
succesfully connect to 2 outbound connections. Since we participate in ADDR
relay with those connections, including sending a GETADDR message during the
VERSION handshake, querying the DNS seeds is unnecessary.
Co-authored-by: Martin Zumsande <mzumsande@gmail.com>
aa02c64540 test: use MiniWallet for simple doublespend test in feature_rbf.py (Sebastian Falbesoner)
a3f6397c73 test: feature_rbf.py: make MiniWallet instance available for all sub-tests (Sebastian Falbesoner)
84c874794c test: remove unneeded initialization code in feature_rbf.py (Sebastian Falbesoner)
Pull request description:
This PR's goal is to prepare the functional test `feature_rbf.py` for more MiniWallet usage. It first gets rid of unused initialization code (I guess that was needed at times when the nodes were still in IBD at the start of tests?), then makes the MiniWallet instance introduced in #22210 available for all sub-tests, and finally, uses that instance in the first sub-test `test_simple_doublespend`.
Note that the same idea of replacing the `make_utxo` calls with MiniWallet can be also applied to other sub-tests too; this just serves as a first proof-of-concept.
ACKs for top commit:
MarcoFalke:
re-ACK aa02c64540🌯
Tree-SHA512: 2902dd15d493d83b0790028c92d14fbd99ca05ace704c7011fb38261ce6517aeb810ef9f360fcb701d95887975b6a2911cfe538858d38fceb2c1c2a40afdbe6b
8ca51af1ec test: Disable automatic connections by default (Martin Zumsande)
Pull request description:
A node normally doesn't make automatic connections to peers in the functional tests because neither DNS seeds nor hardcoded peers are available on regtest. However, when random entries are inserted into addrman as part of a functional test (e.g. while testing addr relay), `ThreadOpenConnections` will periodically try to connect to them, resulting in log entries such as:
`[opencon] [net.cpp:400] [ConnectNode] trying connection 18.166.1.1:8333 lastseen=0.0hrs`
I don't think it's desirable that functional tests try to connect to random computers on the internet, aside from the possibility that at some point in time someone out there might actually answer in a way to ruin a test.
This PR fixes this problem by disabling `ThreadOpenConnections` by adding `-connect=0` to the default args, and adding exceptions only when needed for the test to pass.
ACKs for top commit:
tryphe:
Concept ACK, light code review ACK 8ca51af1ec
Tree-SHA512: bcfb2de610e6c35a97a2bd7ad6267e968b1ac7529638d99276993cd5bc93ce9919d54e22d6dc84e1b02ecd626ab6554e201693552ea065c29794eece38c43f7d
ef5e9304cd test: update logging and docstring in rpc_blockchain.py (Jon Atack)
d548dc71e4 test: replace magic values by constants in rpc_blockchain.py (Jon Atack)
78c361086f test: assert on mediantime in getblockheader and getblockchaininfo (Jon Atack)
0a9129c588 test: assert on the value of getblockchaininfo#time (Jon Atack)
Pull request description:
Follow-up to #22407 improving test coverage per https://github.com/bitcoin/bitcoin/pull/22407#pullrequestreview-702077013.
ACKs for top commit:
tryphe:
untested ACK ef5e9304cd
Tree-SHA512: f746d56f430331bc6a2ea7ecd27b21b06275927966aacf1f1127d8d5fdfd930583cabe72e23df3adb2e005da904fc05dc573b8e5eaa2f86e0e193b89a17a5734
This test checks that we only relay addresses with inbound peers who have sent
us an addr related message. Uses a combination of GETADDR and ADDR to verify
when peers are eligible.
Use SetupAddressRelay to only initialize `m_addr_known` as needed. For outbound
peers, we initialize the filter before sending our self announcement (not
applicable for block-relay-only connections). For inbound peers, we initialize
the filter when we get an addr related message (ADDR, ADDRV2, GETADDR).
These changes intend to mitigate address blackholes. Since an inbound peer has
to send us an addr related message to become eligible as a candidate for addr
relay, this should reduce our likelihood of sending them self-announcements.
Use an init param to make clear whether a getaddr message should be sent when
the P2PConnection receives a version message. These changes are in preparation
for upcoming commits that modify the behavior of a bitcoind node and the test
framework.
fbeb8c43bc test: add type annotations to util.get_rpc_proxy (fanquake)
Pull request description:
Split out from #22092 while we address the functional test failure.
ACKs for top commit:
instagibbs:
ACK fbeb8c43bc
Tree-SHA512: 031ef8703202ae5271787719fc3fea8693574b2eb937ccf852875de95798d7fa3c39a8db7c91993d0c946b45d9b4d6de570bd1102e0344348784723bd84803a8
779e638ca9 coinstats: Add comments for new coinstatsindex values (Fabian Jahr)
5b3d4e724f Index: Improve logging in coinstatsindex (Fabian Jahr)
d4356d4e48 rpc: Block until synced if coinstatsindex is used in gettxoutsetinfo (Fabian Jahr)
a5f6791139 rpc: Add missing gettxoutsetinfo help docs (Fabian Jahr)
01386bfd88 Index: Return early from failed coinstatsindex init (Fabian Jahr)
1e3842385b index: Use batch writing in coinstatsindex WriteBlock (Fabian Jahr)
fb65dde147 scripted-diff: Fix coinstats data member names (Fabian Jahr)
8ea8c927ac index: Avoid unnecessary type casts in coinstatsindex (Fabian Jahr)
Pull request description:
This is a collection of smaller follow-ups to #19521, addressing several post-merge review comments.
ACKs for top commit:
Sjors:
re-utACK 779e638ca9
jonatack:
re-ACK 779e638ca9 diff since last review involves doc changes only; rebased to current master and verified clean debug build/no silent conflicts, unit tests, and feature_coinstatsindex functional test
laanwj:
Code review ACK 779e638ca9
Talkless:
re-utACK 779e638ca9 after cosmetic changes.
Tree-SHA512: cb0d038d230c582d7fe3041c89b1e04d39971fab3739d540c609cf826754c6c513b12ded08ac92180aec7a9d7a70114ece50357bd1a902de4adaae9f30b8d699
a006d7d730 test: add logging to wallet_listtransactions (Sebastian Falbesoner)
47915b1187 test: remove unneeded/redundant code in wallet_listtransactions (Sebastian Falbesoner)
fb6c6a7938 test: speedup wallet_listtransactions by whitelisting peers (immediate tx relay) (Sebastian Falbesoner)
Pull request description:
This PR improves the test `wallet_listtransactions.py` in three ways:
* speeds up runtime by a factor of 2-3x by using the good ol' immediate tx relay trick (`-whitelist=noban@127.0.0.1`)
* removes unneeded/redundant code
* adds log messages, mostly by turning comments into `self.log.info(...)` calls
ACKs for top commit:
jonatack:
ACK a006d7d730
kristapsk:
ACK a006d7d730
Tree-SHA512: a91a19f5ebc4d05f0b96c5419683c4c57ac0ef44b64eeb8dd550bd72296fd3a2857a3ba83f755fe4b0b3bd06439973f226070b5d0ce2dee58344dae78cb50290
This prevents the node from trying to connect to random IPs on the internet
while running the functional tests. Exceptions are added when required for
the test to pass.
Without this check, the tests would also pass if the CSV and
CLTV activation heights are not reached yet (e.g. if the .generate()
calls before are removed), as the operations OP_CSV and OP_CLTV
simply behave as NOPs.
Also fixes a comment in the sub-test `test_signing_with_cltv()`.
During initial sync after startup the gettxoutsetinfo RPC will still return an error while catching up. However, after the initial sync the index will not error immediately anymore when it's in the process of syncing to the tip while being called. Instead it will block until synced and then return the response.
a806647d26 [validation] Always include merkle root in coinbase commitment (Dhruv Mehta)
189128c220 [validation] Set witness script flag with p2sh for blocks (Dhruv Mehta)
ac82b99db7 [p2p] remove redundant NODE_WITNESS checks (Dhruv Mehta)
6f8b198b82 [p2p] remove unused segwitheight=-1 option (Dhruv Mehta)
eba5b1cd64 [test] remove or move tests using `-segwitheight=-1` (Dhruv Mehta)
Pull request description:
Builds on #21009 and makes progress on remaining items in #17862
Removing `RewindBlockIndex()` in #21009 allows the following:
- removal of tests using `segwitheight=-1` in `p2p_segwit.py`.
- move `test_upgrade_after_activation()` out of `p2p_segwit.py` reducing runtime
- in turn, that allows us to drop support for `-segwitheight=-1`, which is only supported for that test.
- that allows us to always set `NODE_WITNESS` in our local services. The only reason we don't do that is to support `-segwitheight=-1`.
- that in turn allows us to drop all of the `GetLocalServices() & NODE_WITNESS` checks inside `net_processing.cpp`, since our local services would always include `NODE_WITNESS`
ACKs for top commit:
mzumsande:
Code-Review ACK a806647d26
laanwj:
Code review ACK a806647d26, nice cleanup
jnewbery:
utACK a806647d26
theStack:
ACK a806647d26
Tree-SHA512: 73e1a69d1d7eca1f5c38558ec6672decd0b60b16c2ef6134df6f6af71bb159e6eea160f9bb5ab0eb6723c6632d29509811e29469d0d87abbe9b69a2890fbc73e
2ebf2fe0e4 test: check for RPC error 'Transaction already in block chain' (-27) (Sebastian Falbesoner)
Pull request description:
This PR adds missing test coverage for the RPC error "Transaction already in block chain" (error code `RPC_VERIFY_ALREADY_IN_CHAIN` = `RPC_TRANSACTION_ALREADY_IN_CHAIN` = -27), which is thrown in the function `BroadcastTransaction` (src/node/transaction.cpp).
ACKs for top commit:
kristapsk:
ACK 2ebf2fe0e4 (ran linter, looked at changes and ran modified test and checked code in `src/node/transaction.cpp`)
darosior:
ACK 2ebf2fe0e4
Tree-SHA512: 8bfbd3ff3da0cb3b8745f69b8ca2377f85fa99f0270750840b60e6ae43b5645c5c59b236993e8b2ad0444ec4171484e4f1ee23fa7e81b79d4222bcb623666fa5
20edf4bcf6 rpc: Return block time in getblockchaininfo (João Barbosa)
Pull request description:
Return tip time in `getblockchaininfo`, for some use cases this can save a call to `getblock`.
ACKs for top commit:
naumenkogs:
ACK 20edf4bcf6
theStack:
re-ACK 20edf4bcf6
0xB10C:
ACK 20edf4bcf6
kristapsk:
ACK 20edf4bcf6
Zero-1729:
re-ACK 20edf4bcf6
Tree-SHA512: 29a920cfff1ef53e0af601c3f93f8f9171f3be47fc84b0fa293cb865b824976e8c1510b17b27d17daf0b8e658dd77d9dc388373395f0919fc4a23cd5019642d5
9b85a5e2f7 tests: Test for dumpwallet lock order issue (Andrew Chow)
25d99e6511 Reorder dumpwallet so that cs_main functions go first (Andrew Chow)
Pull request description:
When a wallet is loaded which has an unconfirmed transaction in the mempool, it will end up establishing the lock order of cs_wallet -> cs_main -> cs_KeyStore. If `dumpwallet` is used on this wallet, then a lock order of cs_wallet -> cs_KeyStore -> cs_main will be used, which causes a lock order assertion. This PR fixes this by reordering `dumpwallet` and `GetKeyBirthTimes` (only used by `dumpwallet`). Specifically, in both functions, the function calls which lock cs_main are done prior to locking cs_KeyStore. This avoids the lock order issue.
Additionally, I have added a test case to `wallet_dump.py`. Of course testing this requires `--enable-debug`.
Fixes#22489
ACKs for top commit:
MarcoFalke:
review ACK 9b85a5e2f7🎰
ryanofsky:
Code review ACK 9b85a5e2f7. Nice to reduce lock scope, and good test!
prayank23:
tACK 9b85a5e2f7
lsilva01:
Tested ACK 9b85a5e2f7 under the same conditions reported in issue #22489 and the `dumpwallet` command completed successfully.
Tree-SHA512: d370a8f415ad64ee6a538ff419155837bcdbb167e3831b06572562289239028c6b46d80b23d227286afe875d9351f3377574ed831549ea426fb926af0e19c755
5a77abd4e6 [style] Clean up BroadcastTransaction() (John Newbery)
7282d4c036 [test] Allow rebroadcast for same-txid-different-wtxid transactions (glozow)
cd48372b67 [mempool] Allow rebroadcast for same-txid-different-wtxid transactions (John Newbery)
847b6ed48d [test] Test transactions are not re-added to unbroadcast set (Duncan Dean)
2837a9f1ea [mempool] Only add a transaction to the unbroadcast set when it's added to the mempool (John Newbery)
Pull request description:
1. Only add a transaction to the unbroadcast set when it's added to the mempool
Currently, if BroadcastTransaction() is called to rebroadcast a
transaction (e.g. by ResendWalletTransactions()), then we add the
transaction to the unbroadcast set. That transaction has already been
broadcast in the past, so peers are unlikely to request it again,
meaning RemoveUnbroadcastTx() won't be called and it won't be removed
from m_unbroadcast_txids.
Net processing will therefore continue to attempt rebroadcast for the
transaction every 10-15 minutes. This will most likely continue until
the node connects to a new peer which hasn't yet seen the transaction
(or perhaps indefinitely).
Fix by only adding the transaction to the broadcast set when it's added to the mempool.
2. Allow rebroadcast for same-txid-different-wtxid transactions
There is some slightly unexpected behaviour when:
- there is already transaction in the mempool (the "mempool tx")
- BroadcastTransaction() is called for a transaction with the same txid
as the mempool transaction but a different witness (the "new tx")
Prior to this commit, if BroadcastTransaction() is called with
relay=true, then it'll call RelayTransaction() using the txid/wtxid of
the new tx, not the txid/wtxid of the mempool tx. For wtxid relay peers,
in SendMessages(), the wtxid of the new tx will be taken from
setInventoryTxToSend, but will then be filtered out from the vector of
wtxids to announce, since m_mempool.info() won't find the transaction
(the mempool contains the mempool tx, which has a different wtxid from
the new tx).
Fix this by calling RelayTransaction() with the wtxid of the mempool
transaction in this case.
The third commit is a comment/whitespace only change to tidy up the BroadcastTransaction() function.
ACKs for top commit:
duncandean:
reACK 5a77abd
naumenkogs:
ACK 5a77abd4e6
theStack:
re-ACK 5a77abd4e6
lsilva01:
re-ACK 5a77abd4e6
Tree-SHA512: d1a46d32a9f975220e5b432ff6633fac9be01ea41925b4958395b8d641680500dc44476b12d18852e5b674d2d87e4d0160b4483e45d3d149176bdff9f4dc8516
5730a43703 test: Add functional test for AddrFetch connections (Martin Zumsande)
c34ad3309f net, rpc: Enable AddrFetch connections for functional testing (Martin Zumsande)
533500d907 p2p: Add timeout for AddrFetch peers (Martin Zumsande)
b6c5d1e450 p2p: AddrFetch - don't disconnect on self-announcements (Martin Zumsande)
Pull request description:
AddrFetch connections (old name: oneshots) are intended to be short-lived connections on which we ask a peer for addresses via `getaddr` and disconnect after receiving them.
This is done by disconnecting after receiving the first `addr`. However, it is no longer working as intended, because nowadays, the first `addr` a typical bitcoin core node sends is its self-announcement.
So we'll disconnect before the peer gets a chance to answer our `getaddr`.
I checked that this affects both `-seednode` peers specified manually, and DNS seeds when AddrFetch is used as a fallback if DNS doesn't work for us.
The current behavior of getting peers via AddrFetch when starting with an empty addrman would be to connect to the peer, receive its self-announcement and add it to addrman, disconnect, reconnect to the same peer again as a full outbound (no other addresses in addrman) and then receive more `addr`. This is silly and not in line with AddrFetch peer being intended to be short-lived peers.
Fix this by only disconnecting after receiving an `addr` message of size > 1.
[Edit] As per review discussion, this PR now also adds a timeout after which we disconnect if we haven't received any suitable `addr`, and a functional test.
ACKs for top commit:
amitiuttarwar:
reACK 5730a43703
naumenkogs:
ACK 5730a43703
jnewbery:
ACK 5730a43703
Tree-SHA512: 8a81234f37e827705138eb254223f7f3b3bf44a06cb02126fc7990b0d231b9bd8f07d38d185cc30d55bf35548a6fdc286b69602498d875b937e7c58332158bf9
Adds a test for the condition which can trigger a lock order assertion.
Specifically, there must be an unconfirmed transaction in the mempool
which belongs to the wallet being loaded. This will establish the order
of cs_wallet -> cs_main -> cs_KeyStore. Then dumpwallet is called on
that wallet. Previously, this would have used a lock order of cs_wallet
-> cs_KeyStore -> cs_main, but this should be fixed now. The test
ensures that.
a4bcd687c9 Improve tests using statistics (John Newbery)
f424d601e1 Add logging and addr rate limiting statistics (Pieter Wuille)
b4ece8a1cd Functional tests for addr rate limiting (Pieter Wuille)
5648138f59 Randomize the order of addr processing (Pieter Wuille)
0d64b8f709 Rate limit the processing of incoming addr messages (Pieter Wuille)
Pull request description:
The rate at which IP addresses are rumoured (through ADDR and ADDRV2 messages) on the network seems to vary from 0 for some non-participating nodes, to 0.005-0.025 addr/s for recent Bitcoin Core nodes. However, the current codebase will happily accept and process an effectively unbounded rate from attackers. There are measures to limit the influence attackers can have on the addrman database (bucket restrictions based on source IPs), but still - there is no need to permit them to feed us addresses at a rate that's orders of magnitude larger than what is common on the network today, especially as it will cause us to spam our peers too.
This PR implements a [token bucket](https://en.wikipedia.org/wiki/Token_bucket) based rate limiter, allowing an average of 0.1 addr/s per connection, with bursts up to 1000 addresses at once. Whitelisted peers as well as responses to GETADDR requests are exempt from the limit. New connections start with 1 token, so as to not interfere with the common practice of peers' self-announcement.
ACKs for top commit:
laanwj:
ACK a4bcd687c9
vasild:
ACK a4bcd687c9
jnewbery:
ACK a4bcd687c9
jonatack:
ACK a4bcd687c9
Tree-SHA512: b757de76ad78a53035b622944c4213b29b3b55d3d98bf23585afa84bfba10808299d858649f92269a16abfa75eb4366ea047eae3216f7e2f6d3c455782a16bea
-> remove unneeded get-out-of IBD generate()
(The test framework already sets up the nodes to be out of IBD
in setup_nodes(), if setup_clean_chain is not set to True)
-> remove duplicate code line assigning an utxo
By whitelisting the peers via -whitelist, the inventory is transmissioned
immediately rather than on average every 5 seconds, speeding up the test by at
least a factor of two:
before:
$ time ./wallet_listtransactions.py
...
0m40.25s real 0m01.74s user 0m01.70s system
with this PR:
$ time ./wallet_listtransactions.py
...
0m14.93s real 0m01.68s user 0m01.87s system
This commit also moves the wallet_listtransactions tests into the < 30s group.
While limitations on the influence of attackers on addrman already
exist (affected buckets are restricted to a subset based on incoming
IP / network group), there is no reason to permit them to let them
feed us addresses at more than a multiple of the normal network
rate.
This commit introduces a "token bucket" rate limiter for the
processing of addresses in incoming ADDR and ADDRV2 messages.
Every connection gets an associated token bucket. Processing an
address in an ADDR or ADDRV2 message from non-whitelisted peers
consumes a token from the bucket. If the bucket is empty, the
address is ignored (it is not forwarded or processed). The token
counter increases at a rate of 0.1 tokens per second, and will
accrue up to a maximum of 1000 tokens (the maximum we accept in a
single ADDR or ADDRV2). When a GETADDR is sent to a peer, it
immediately gets 1000 additional tokens, as we actively desire many
addresses from such peers (this may temporarily cause the token
count to exceed 1000).
The rate limit of 0.1 addr/s was chosen based on observation of
honest nodes on the network. Activity in general from most nodes
is either 0, or up to a maximum around 0.025 addr/s for recent
Bitcoin Core nodes. A few (self-identified, through subver) crawler
nodes occasionally exceed 0.1 addr/s.
7593b06bd1 test: ensure I2P addresses are relayed (Vasil Dimov)
e7468139a1 test: make CAddress in functional tests comparable (Vasil Dimov)
33e211d2a4 test: implement ser/unser of I2P addresses in functional tests (Vasil Dimov)
86742811ce test: use NODE_* constants instead of magic numbers (Vasil Dimov)
ba45f02708 net: relay I2P addresses even if not reachable (by us) (Vasil Dimov)
Pull request description:
Nodes that can reach the I2P network (have set `-i2psam=`) will relay
I2P addresses even without this patch. However, nodes that can't reach
the I2P network will not. This was done as a precaution in
https://github.com/bitcoin/bitcoin/pull/20119 before anybody could
connect to I2P because then, for sure, it would have been useless.
Now, however, we have I2P support and a bunch of I2P nodes, so get all
nodes on the network to relay I2P addresses to help with propagation,
similarly to what we do with Tor addresses.
ACKs for top commit:
jonatack:
ACK 7593b06bd1
naumenkogs:
ACK 7593b06bd1.
laanwj:
Code review ACK 7593b06bd1
kristapsk:
ACK 7593b06bd1. Code looks correct, tested that functional test suite passes and also that `test/functional/p2p_addrv2_replay.py` fails if I undo changes in `IsRelayable()`.
Tree-SHA512: c9feec4a9546cc06bc2fec6d74f999a3c0abd3d15b7c421c21fcf2d610eb94611489e33d61bdcd5a4f42041a6d84aa892f7ae293b0d4f755309a8560b113b735
a3d6ec5bb5 test: move rpc_rawtransaction tests to < 30s group (Jon Atack)
5a1ed96077 test: whitelist rpc_rawtransaction peers to speed up tests (Jon Atack)
Pull request description:
Speed up the somewhat slow `rpc_rawtransaction.py` test by more than 3x (from 45-55 seconds to 15 seconds on a laptop running 2 x 2.5GHz).
ACKs for top commit:
mjdietzx:
ACK a3d6ec5bb5
kristapsk:
ACK a3d6ec5bb5
theStack:
ACK a3d6ec5bb5🐎
brunoerg:
tACK a3d6ec5bb5
Tree-SHA512: f1d105594c9b5b257a7096b631a6fa5aeb50e330a351f75c2d6ffa7dd73abdb6e1f596a78c16d204a9bac3fe506e0519f9ad96bb8477ab6424c8e18125ccb659
fa80e10d94 test: Add feature_taproot.py --previous_release (MarcoFalke)
85ccffa266 test: move releases download incantation to README (Sjors Provoost)
29d6b1da2a test: previous releases: add v0.20.1 (Sjors Provoost)
Pull request description:
Disabling the new consensus code at runtime is fine, but potentially fragile and incomplete. Fix that by giving the option to run with a version that has been compiled without any taproot code.
ACKs for top commit:
Sjors:
tACK fa80e10
NelsonGaldeman:
tACK fa80e10d94
Tree-SHA512: 1a1feef823f08c05268759645a8974e1b2d39a024258f5e6acecbe25097aae3fa9302c27262978b40f1aa8e7b525b60c0047199010f2a5d6017dd6434b4066f0
4101ec9d2e doc: mention that we enforce port=0 in I2P (Vasil Dimov)
e0a2b390c1 addrman: reset I2P ports to 0 when loading from disk (Vasil Dimov)
41cda9d075 test: ensure I2P ports are handled as expected (Vasil Dimov)
4f432bd738 net: do not connect to I2P hosts on port!=0 (Vasil Dimov)
1f096f091e net: distinguish default port per network (Vasil Dimov)
aeac3bce3e net: change I2P seeds' ports to 0 (Vasil Dimov)
38f900290c net: change assumed I2P port to 0 (Vasil Dimov)
Pull request description:
_This is an alternative to https://github.com/bitcoin/bitcoin/pull/21514, inspired by https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-815049933. They are mutually exclusive. Just one of them should be merged._
Change assumed ports for I2P to 0 (instead of the default 8333) as this is closer to what actually happens underneath with SAM 3.1 (https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-812632520, https://github.com/bitcoin/bitcoin/pull/21514#issuecomment-816564719).
Don't connect to I2P peers with advertised port != 0 (we don't specify a port to our SAM 3.1 proxy and it always connects to port = 0).
Note, this change:
* Keeps I2P addresses with port != 0 in addrman and relays them to others via P2P gossip. There may be non-bitcoin-core-22.0 peers using SAM 3.2 and for them such addresses may be useful.
* Silently refuses to connect to I2P hosts with port != 0. This is ok for automatically chosen peers from addrman. Not so ok for peers provided via `-addnode` or `-connect` - a user who specifies `foo.b32.i2p:1234` (non zero port) may wonder why "nothing is happening".
Fixes#21389
ACKs for top commit:
laanwj:
Code review ACK 4101ec9d2e
jonatack:
re-ACK 4101ec9d2e per `git range-diff efff9c3 0b0ee03 4101ec9`, built with DDEBUG_ADDRMAN, did fairly extensive testing on mainnet both with and without a peers.dat / -dnsseeds=0 to test boostrapping.
Tree-SHA512: 0e3c019e1dc05e54f559275859d3450e0c735596d179e30b66811aad9d5b5fabe3dcc44571e8f7b99f9fe16453eee393d6e153454dd873b9ff14907d4e6354fe
2feec3ce31 net: don't bind on 0.0.0.0 if binds are restricted to Tor (Vasil Dimov)
Pull request description:
The semantic of `-bind` is to restrict the binding only to some address.
If not specified, then the user does not care and we bind to `0.0.0.0`.
If specified then we should honor the restriction and bind only to the
specified address.
Before this change, if no `-bind` is given then we would bind to
`0.0.0.0:8333` and to `127.0.0.1:8334` (incoming Tor) which is ok -
the user does not care to restrict the binding.
However, if only `-bind=addr:port=onion` is given (without ordinary
`-bind=`) then we would bind to `addr:port` _and_ to `0.0.0.0:8333` in
addition.
Change the above to not do the additional bind: if only
`-bind=addr:port=onion` is given (without ordinary `-bind=`) then bind
to `addr:port` (only) and consider incoming connections to that as Tor
and do not advertise it. I.e. a Tor-only node.
ACKs for top commit:
laanwj:
Code review ACK 2feec3ce31
jonatack:
utACK 2feec3ce31 per `git diff a004833 2feec3c`
hebasto:
ACK 2feec3ce31, tested on Linux Mint 20.1 (x86_64):
Tree-SHA512: a04483af601706da928958b92dc560f9cfcc78ab0bb9d74414636eed1c6f29ed538ce1fb5a17d41ed82c9c9a45ca94899d0966e7ef93da809c9bcdcdb1d1f040
b7a8cd9963 [test] submit same txid different wtxid as mempool tx (glozow)
fdb48163bf [validation] distinguish same txid different wtxid in mempool (glozow)
Pull request description:
On master, if you submit a transaction with the same txid but different witness to the mempool, it thinks the transactions are the same. Users submitting through `BroadcastTransaction()` (i.e. `sendrawtransaction` or the wallet) don't get notified that there's a different transaction in the mempool, although it doesn't crash. Users submitting through `testmempoolaccept()` will get a "txn-already-in-mempool" error.
This PR simply distinguishes between `txn-already-in-mempool` and `txn-same-nonwitness-data-in-mempool`, without handling them differently: `sendrawtransaction` still will not throw, but `testmempoolaccept` will give you a different error.
I believe the intention of #19645 is to allow full swaps of transactions that have different witnesses but identical nonwitness data. Returning a different error message + adding a test was suggested: https://github.com/bitcoin/bitcoin/pull/19645#issuecomment-705109193 so this is that PR.
ACKs for top commit:
naumenkogs:
ACK b7a8cd9963
jnewbery:
Code review ACK b7a8cd9963
theStack:
Code-review ACK b7a8cd9963
darosior:
re-utACK b7a8cd9963
Tree-SHA512: 9c6591edaf8727ba5b4675977adb8cbdef7288584003b6cd659828032dc92d2ae915800a8ef8b6fdffe112c1b660df72297a3dcf2e2e3e1f959c6cb3678c63ee
905d672b74 test: use script_util helpers for creating P2W{PKH,SH} scripts (Sebastian Falbesoner)
285a65ccfd test: use script_util helpers for creating P2SH scripts (Sebastian Falbesoner)
b57b633b94 test: use script_util helpers for creating P2PKH scripts (Sebastian Falbesoner)
61b6a017a9 test: wallet util: fix multisig P2SH-P2WSH script creation (Sebastian Falbesoner)
Pull request description:
PR #18788 (commit 08067aebfd) introduced functions to generate output scripts for various types. This PR replaces all manual CScript creations in the P2PKH, P2SH, P2WPKH, P2WSH formats with those helpers in order to increase readability and maintainability over the functional test codebase. The first commit fixes a bug in the wallet_util helper module w.r.t. to P2SH-P2WSH script creation (the result is not used in any test so far, hence it can still be seen as refactoring).
The following table shows a summary of the output script patterns tackled in this PR:
| Type | master branch | PR branch |
| ---------- | ------------- | ------------- |
| P2PKH | `CScript([OP_DUP, OP_HASH160, hash160(key), OP_EQUALVERIFY, OP_CHECKSIG])` | `key_to_p2pkh_script(key)` |
| | `CScript([OP_DUP, OP_HASH160, keyhash, OP_EQUALVERIFY, OP_CHECKSIG])` | `keyhash_to_p2pkh_script(keyhash)` |
| P2SH | `CScript([OP_HASH160, hash160(script), OP_EQUAL])` | `script_to_p2sh_script(script)` |
| P2WPKH | `CScript([OP_0, hash160(key)])` | `key_to_p2wpkh_script(key)` |
| P2WSH | `CScript([OP_0, sha256(script)])` | `script_to_p2wsh_script(script)` |
Note that the `key_to_...` helpers can't be used if an invalid key size (not 33 or 65 bytes) is passed, which is the case in some rare instances where the scripts still have to be created manually.
Possible follow-up ideas:
* further simplify by identifying P2SH-wrapped scripts and using `key_to_p2sh_p2wpkh_script()` and `script_to_p2sh_p2wsh_script()` helpers
* introduce and use `key_to_p2pk_script()` helper for P2PK scripts
ACKs for top commit:
rajarshimaitra:
tACK 905d672b74
LarryRuane:
tACK 905d672b74
0xB10C:
ACK 905d672b74
MarcoFalke:
review ACK 905d672b74 🕹
Tree-SHA512: 7ccfe69699bc81168ac122b03536720013355c1b2fbb088355b616015318644c4d1cd27e20c4f56c89ad083ae609add4bc838cf6316794d0edb0ce9cf7fa0fd8
The semantic of `-bind` is to restrict the binding only to some address.
If not specified, then the user does not care and we bind to `0.0.0.0`.
If specified then we should honor the restriction and bind only to the
specified address.
Before this change, if no `-bind` is given then we would bind to
`0.0.0.0:8333` and to `127.0.0.1:8334` (incoming Tor) which is ok -
the user does not care to restrict the binding.
However, if only `-bind=addr:port=onion` is given (without ordinary
`-bind=`) then we would bind to `addr:port` _and_ to `0.0.0.0:8333` in
addition.
Change the above to not do the additional bind: if only
`-bind=addr:port=onion` is given (without ordinary `-bind=`) then bind
to `addr:port` (only) and consider incoming connections to that as Tor
and do not advertise it. I.e. a Tor-only node.
This reject reason is triggered for non-coinbase transactions with
a coinbase-like outpoint, i.e. hash=0, n=0xffffffff.
Note that the invalid tx templates are currently used in the
functional tests feature_block.py and p2p_invalid_tx.py.
The constant `MAX_BLOCK_BASE_SIZE` has been removed from the
core implementation years ago due to being confusing and
superfluous, as it is implied by the block weight limit (see
PRs #10618 and #10608). Since there is also no point in
still keeping it in the functional test framework, we switch
to weight-based accounting on the relevant test code parts
and use `MAX_BLOCK_WEIGHT` instead for the block limit
checks.
c4ddee64c7 test: Add test for replacement relay fee check (Antoine Riard)
Pull request description:
This PR adds rename the `reject_reason` of our implementation of BIP125 rule 4 and adds missing functional test coverage. Note, `insufficient fee` is already the `reject_reason` of few others `PreChecks` replacement checks and as such might be confusing.
> The replacement transaction must also pay for its own bandwidth at or above the rate set by the node's minimum relay fee setting. For example, if the minimum relay fee is 1 satoshi/byte and the replacement transaction is 500 bytes total, then the replacement must pay a fee at least 500 satoshis higher than the sum of the originals.
```
// Finally in addition to paying more fees than the conflicts the
// new transaction must pay for its own bandwidth.
CAmount nDeltaFees = nModifiedFees - nConflictingFees;
if (nDeltaFees < ::incrementalRelayFee.GetFee(nSize))
{
return state.Invalid(TxValidationResult::TX_MEMPOOL_POLICY, "insufficient fee",
strprintf("rejecting replacement %s, not enough additional fees to relay; %s < %s",
hash.ToString(),
FormatMoney(nDeltaFees),
FormatMoney(::incrementalRelayFee.GetFee(nSize))));
}
```
ACKs for top commit:
MarcoFalke:
cr ACK c4ddee64c7
glozow:
ACK c4ddee6, one small suggestion if you retouch.
Tree-SHA512: 7c5d1065db6e6fe57a9f083bf051a7a55eb9892de3a2888679d4a6853491608c93b6e35887ef383a9988d14713fa13a0b1d6134b7354af5fd54765f0d4e98568
3efaf83c75 wallet: deactivate descriptor (S3RK)
6737d9655b test: wallet importdescriptors update existing (S3RK)
586f1d53d6 wallet: maintain SPK consistency on internal flag change (S3RK)
f1b7db1474 wallet: don't mute exceptions in importdescriptors (S3RK)
bf68ebc1cd wallet: allow to import same descriptor twice (S3RK)
Pull request description:
Rationale: allow updating existing descriptors with `importdescriptors` command.
Currently if you run same `importdescriptors` command twice with a descriptor containing private key you will get very confusing error — `Missing required fields`. What happens is that Wallet tries to write imported private key to the disk, but it exists already so we get `DB_KEYEXIST (-30995)` from BerkelyDB. Please note, that we set `DB_NOOVERWRITE` (I guess not to lose some keys accidentally). The exception is caught in `catch (...)` in rpcdump.cpp with a generic error.
With this PR if a descriptor is already present than we will update its activeness, internalness, label, range and next_index.
For the range only expansion is allowed (range start can only decrease, range end increase).
ACKs for top commit:
achow101:
re-ACK 3efaf83c75
meshcollider:
Code review ACK 3efaf83c75
jonatack:
Light ACK 3efaf83c75 per `git range-diff a000cb0 5d96704 3efaf83` and as a sanity check, re-debug-built on debian with gcc 10.2.1 and clang 11, ran wallet_importdescriptors.py
Tree-SHA512: 122c4b621d64ec8a3b625f3aed9f01a2b5cbaf2029ad0325b5ff38d67fff5cd35324335fabe2dd5169548b01b267c81be6ae0f5c834342f3d5f6eeed515c4843
