52dd40a9fe test: add missing netaddress include headers (Jon Atack)
6f09c0f6b5 util: add missing braces and apply clang format to SplitHostPort() (Jon Atack)
2875a764f7 util: add ParseUInt16(), use it in SplitHostPort() (Jon Atack)
6423c8175f p2p, refactor: pass and use uint16_t CService::port as uint16_t (Jon Atack)
Pull request description:
As noticed during review today in https://github.com/bitcoin/bitcoin/pull/20685#discussion_r584873708 of the upcoming I2P network support, `CService::port` is `uint16_t` but is passed around the codebase and into the ctors as `int`, which causes uneeded conversions and casts. We can avoid these (including in the incoming I2P code without further changes to it) by using ports with the correct type. The remaining conversions are pushed out to the user input boundaries where they can be range-checked and raise with user feedback in the next patch.
ACKs for top commit:
practicalswift:
cr ACK 52dd40a9fe: patch looks correct
MarcoFalke:
cr ACK 52dd40a9fe
vasild:
ACK 52dd40a9fe
Tree-SHA512: 203c1cab3189a206c55ecada77b9548b810281cdc533252b8e3330ae0606b467731c75f730ce9deb07cbaab66facf97e1ffd2051084ff9077cba6750366b0432
Introduce two new options to reach the I2P network:
* `-i2psam=<ip:port>` point to the I2P SAM proxy. If this is set then
the I2P network is considered reachable and we can make outgoing
connections to I2P peers via that proxy. We listen for and accept
incoming connections from I2P peers if the below is set in addition to
`-i2psam=<ip:port>`
* `-i2pacceptincoming` if this is set together with `-i2psam=<ip:port>`
then we accept incoming I2P connections via the I2P SAM proxy.
Isolate the second half of `CConnman::AcceptConnection()` into a new
separate method, which could be reused if we accept incoming connections
by other means than `accept()` (first half of
`CConnman::AcceptConnection()`).
Gossiping addresses to peers is the responsibility of net processing.
Change AdvertiseLocal() in net to just return an (optional) address
for net processing to advertise. Update function name to reflect
new responsibility.
Moves the logic to prevent running inactivity checks until
the peer has been connected for -peertimeout time into its
own function. This will be reused by net_processing later.
bff7c66e67 Add documentation to contrib folder (Troy Giorshev)
381f77be85 Add Message Capture Test (Troy Giorshev)
e4f378a505 Add capture parser (Troy Giorshev)
4d1a582549 Call CaptureMessage at appropriate locations (Troy Giorshev)
f2a77ff97b Add CaptureMessage (Troy Giorshev)
dbf779d5de Clean PushMessage and ProcessMessages (Troy Giorshev)
Pull request description:
This PR introduces per-peer message capture into Bitcoin Core. 📓
## Purpose
The purpose and scope of this feature is intentionally limited. It answers a question anyone new to Bitcoin's P2P protocol has had: "Can I see what messages my node is sending and receiving?".
## Functionality
When a new debug-only command line argument `capturemessages` is set, any message that the node receives or sends is captured. The capture occurs in the MessageHandler thread. When receiving a message, it is captured as soon as the MessageHandler thread takes the message off of the vProcessMsg queue. When sending, the message is captured just before the message is pushed onto the vSendMsg queue.
The message capture is as minimal as possible to reduce the performance impact on the node. Messages are captured to a new `message_capture` folder in the datadir. Each node has their own subfolder named with their IP address and port. Inside, received and sent messages are captured into two binary files, msgs_recv.dat and msgs_sent.dat, like so:
```
message_capture/203.0.113.7:56072/msgs_recv.dat
message_capture/203.0.113.7:56072/msgs_sent.dat
```
Because the messages are raw binary dumps, included in this PR is a Python parsing tool to convert the binary files into human-readable JSON. This script has been placed on its own and out of the way in the new `contrib/message-capture` folder. Its usage is simple and easily discovered by the autogenerated `-h` option.
## Future Maintenance
I sympathize greatly with anyone who says "the best code is no code".
The future maintenance of this feature will be minimal. The logic to deserialize the payload of the p2p messages exists in our testing framework. As long as our testing framework works, so will this tool.
Additionally, I hope that the simplicity of this tool will mean that it gets used frequently, so that problems will be discovered and solved when they are small.
## FAQ
"Why not just use Wireshark"
Yes, Wireshark has the ability to filter and decode Bitcoin messages. However, the purpose of the message capture added in this PR is to assist with debugging, primarily for new developers looking to improve their knowledge of the Bitcoin Protocol. This drives the design in a different direction than Wireshark, in two different ways. First, this tool must be convenient and simple to use. Using an external tool, like Wireshark, requires setup and interpretation of the results. To a new user who doesn't necessarily know what to expect, this is unnecessary difficulty. This tool, on the other hand, "just works". Turn on the command line flag, run your node, run the script, read the JSON. Second, because this tool is being used for debugging, we want it to be as close to the true behavior of the node as possible. A lot can happen in the SocketHandler thread that would be missed by Wireshark.
Additionally, if we are to use Wireshark, we are at the mercy of whoever it maintaining the protocol in Wireshark, both as to it being accurate and recent. As can be seen by the **many** previous attempts to include Bitcoin in Wireshark (google "bitcoin dissector") this is easier said than done.
Lastly, I truly believe that this tool will be used significantly more by being included in the codebase. It's just that much more discoverable.
ACKs for top commit:
MarcoFalke:
re-ACK bff7c66e67 only some minor changes: 👚
jnewbery:
utACK bff7c66e67
theStack:
re-ACK bff7c66e67
Tree-SHA512: e59e3160422269221f70f98720b47842775781c247c064071d546c24fa7a35a0e5534e8baa4b4591a750d7eb16de6b4ecf54cbee6d193b261f4f104e28c15f47
This commit adds the CaptureMessage function. This will later be called
when any message is sent or received. The capture directory is fixed,
in a new folder "message_capture" in the datadir. Peers will then have
their own subfolders, named with their IP address and port, replacing
colons with underscores to keep compatibility with Windows. Inside,
received and sent messages will be captured into two binary files,
msgs_recv.dat and msgs_sent.dat.
e.g.
message_capture/203.0.113.7_56072/msgs_recv.dat
message_capture/203.0.113.7_56072/msgs_sent.dat
The format has been designed as to result in a minimal performance
impact. A parsing script is added in a later commit.
Also clean up and better comment the function. InactivityChecks() uses a
mixture of (non-mockable) system time and mockable time. Make sure
that's well documented.
Despite being marked as const in CConnman before this commit, the
function did mutate the state of the passed in CNode, which is contained
in vNodes, which is a member of CConnman. To make the function truly
const in CConnman and all its data, instead make InactivityChecks() a
pure function, return whether the peer should be disconnected, and let
the calling function (SocketHandler()) update the CNode object. Also
make the CNode& argument const.
b4dd2ef800 [test] Test the add_outbound_p2p_connection functionality (Amiti Uttarwar)
602e69e427 [test] P2PBlocksOnly - Test block-relay-only connections. (Amiti Uttarwar)
8bb6beacb1 [test/refactor] P2PBlocksOnly - Extract transaction violation test into helper. (Amiti Uttarwar)
99791e7560 [test/refactor] P2PBlocksOnly - simplify transaction creation using blocktool helper. (Amiti Uttarwar)
3997ab9154 [test] Add test framework support to create outbound connections. (Amiti Uttarwar)
5bc04e8837 [rpc/net] Introduce addconnection to test outbounds & blockrelay (Amiti Uttarwar)
Pull request description:
The existing functional test framework uses the `addnode` RPC to spin up manual connections between bitcoind nodes. This limits our ability to add integration tests for our networking code, which often executes different code paths for different connection types.
**This PR enables creating `outbound` & `block-relay-only` P2P connections in the functional tests.** This allows us to increase our p2p test coverage, since we can now verify expectations around these connection types.
This builds out the [prototype](https://github.com/bitcoin/bitcoin/issues/14210#issuecomment-527421978) proposed by ajtowns in #14210. 🙌🏽
An overview of this branch:
- introduces a new test-only RPC function `addconnection` which initiates opening an `outbound` or `block-relay-only` connection. (conceptually similar to `addnode` but for different connection types & restricted to regtest)
- adds `test_framework` support so a mininode can open an `outbound`/`block-relay-only` connection to a `P2PInterface`/`P2PConnection`.
- updates `p2p_blocksonly` tests to create a `block-relay-only` connection & verify expectations around transaction relay.
- introduces `p2p_add_connections` test that checks the behaviors of the newly introduced `add_outbound_p2p_connection` test framework function.
With these changes, there are many more behaviors that we can add integration tests for. The blocksonly updates is just one example.
Huge props to ajtowns for conceiving the approach & providing me feedback as I've built out this branch. Also thank you to jnewbery for lots of thoughtful input along the way.
ACKs for top commit:
troygiorshev:
reACK b4dd2ef800
jnewbery:
utACK b4dd2ef800
MarcoFalke:
Approach ACK b4dd2ef800🍢
Tree-SHA512: d1cba768c19c9c80e6a38b1c340cc86a90701b14772c4a0791c458f9097f6a4574b4a4acc7d13d6790c7b1f1f197e2c3d87996270f177402145f084ef8519a6b
3642b2ed34 refactor, net: Increase CNode data member encapsulation (Hennadii Stepanov)
acebb79d3f refactor, move-only: Relocate CNode private members (Hennadii Stepanov)
Pull request description:
All protected `CNode` data members could be private.
ACKs for top commit:
jnewbery:
utACK 3642b2ed34
MarcoFalke:
review ACK 3642b2ed34 🏛
Tree-SHA512: 8435e3c43c3b7a3107d58cb809b8b5e1a1c0068677e249bdf0fc6ed24140ac4fc4efe2a280a1ee86df180d738c0c9e10772308690607954db6713000cf6e728d
fad1f0fd33 net: Remove unused cs_feeFilter (MarcoFalke)
Pull request description:
A `RecursiveMutex` is overkill for setting or reading a plain integer. Even a `Mutex` is overkill, when a plain `std::atomic` can be used.
This removes 11 lines of code. Also, it is cutting down on the number of locks put on the stack at the same time, which complicates review looking out for potential lock contention.
ACKs for top commit:
jnewbery:
utACK fad1f0fd33
practicalswift:
cr ACK fad1f0fd33: patch looks correct
Tree-SHA512: 647f9b954fbf52e138d3e710937eb9131b390fef0deae03fd6a162d5a18b9f194010800bbddc8f89208d91be2802dff11c3884d04b3dd233865abd12aa3cde06
fad327ca65 fuzz: net permission flags in net processing (MarcoFalke)
Pull request description:
to increase coverage
ACKs for top commit:
Crypt-iQ:
cr ACK fad327c
practicalswift:
ACK fad327ca65
Tree-SHA512: f8643d1774ff13524ab97ab228ad070489e080435e5742af26e6e325fd002e4c1fd78b9887e11622e79d6fe0c4daaddce5e033e6cd4b32e50fd68b434aab7333
faecb74562 Expose integral m_conn_type in CNodeStats, remove m_conn_type_string (Jon Atack)
Pull request description:
Currently, strings are stored for what are actually integral (strong) enum types. This is fine, because the strings are only used as-is for the debug log and RPC. However, it complicates using them in the GUI. User facing strings in the GUI should be translated and only string literals can be picked up for translation, not runtime `std::string`s.
Fix that by removing the `std::string` members and replace them by strong enum integral types.
ACKs for top commit:
jonatack:
Code review ACK faecb74562
theStack:
Code review ACK faecb74562🌲
Tree-SHA512: 24df2bd0645432060e393eb44b8abaf20fe296457d07a867b0e735c3e2e75af7b03fc6bfeca734ec33ab816a7c8e1f8591a5ec342f3afe3098a4e41f5c2cfebb
Add a new RPC endpoint to enable opening outbound connections from
the tests. The functional test framework currently uses the addnode RPC, which
has different behavior than general outbound peers. These changes enable
creating both full-relay and block-relay-only connections. The new RPC
endpoint calls through to a newly introduced AddConnection method on
CConnman that ensures we stay within the allocated max.
31b136e580 Don't declare de facto const reference variables as non-const (practicalswift)
1c65c075ee Don't declare de facto const member functions as non-const (practicalswift)
Pull request description:
_Meta: This is the second and final part of the `const` refactoring series (part one: #20581). **I promise: no more refactoring PRs from me in a while! :)** I'll now go back to focusing on fuzzing/hardening!_
Changes in this PR:
* Don't declare de facto const member functions as non-const
* Don't declare de facto const reference variables as non-const
Awards for finding candidates for the above changes go to:
* `clang-tidy`'s [`readability-make-member-function-const`](https://clang.llvm.org/extra/clang-tidy/checks/readability-make-member-function-const.html) check ([list of `clang-tidy` checks](https://clang.llvm.org/extra/clang-tidy/checks/list.html))
* `cppcheck`'s `constVariable` check ([list of `cppcheck` checks](https://sourceforge.net/p/cppcheck/wiki/ListOfChecks/))
See #18920 for instructions on how to analyse Bitcoin Core using Clang Static Analysis, `clang-tidy` and `cppcheck`.
ACKs for top commit:
ajtowns:
ACK 31b136e580
jonatack:
ACK 31b136e580
theStack:
ACK 31b136e580❄️
Tree-SHA512: f58f8f00744219426874379e9f3e9331132b9b48e954d24f3a85cbb858fdcc98009ed42ef7e7b4619ae8af9fc240a6d8bfc1c438db2e97b0ecd722a80dcfeffe
378aedc452 [net] Add cs_vSend lock annotations (John Newbery)
673254515a [net] Move RecordBytesSent() call out of cs_vSend lock (John Newbery)
Pull request description:
RecordBytesSent() does not require cs_vSend to be locked, so reduce the scope of cs_vSend.
Also correctly annotate the CNode data members that are guarded by cs_vSend.
This is a simpler alternative to #19673.
ACKs for top commit:
jnewbery:
ok, reverting to commit 378aedc which has two ACKs already. Any style issues can be fixed up in future PRs.
troygiorshev:
ACK 378aedc452
theStack:
re-ACK 378aedc452
MarcoFalke:
review ACK 378aedc452🔌
Tree-SHA512: e9cd6c472b7e1479120c1bf2d1c640cf6d18c7d589a5f9b7dfc4875e5790adaab403a7a1b945a47e79e7249a614b8583270e4549f89b22e8a9edb2e4818b0d07
0e51a35512 refactor: Use Mutex type for some mutexes in CNode class (Hennadii Stepanov)
Pull request description:
No need the `RecursiveMutex` type for the `CNode::cs_vSend`, `CNode::cs_hSocket` and `CNode::cs_vRecv`.
Related to #19303.
ACKs for top commit:
jnewbery:
utACK 0e51a35512
MarcoFalke:
review ACK 0e51a35512🔊
Tree-SHA512: 678ee5e3c15ad21a41cb86ec7179741bd505a138638fdc07f41d6d677c38fbf2208219bfc0509e3675e721fc8d8816e858070db7b87c5d72ad93aae81f7e1636
86c495223f net: add CNode::IsInboundOnion() public getter and unit tests (Jon Atack)
6609eb8cb5 net: assert CNode::m_inbound_onion is inbound in ctor (Jon Atack)
993d1ecd19 test, fuzz: fix constructing CNode with invalid inbound_onion (Jon Atack)
Pull request description:
The goal of this PR is to be able to depend on `m_inbound_onion` in AttemptToEvictConnection in #20197:
- asserts `CNode::m_inbound_onion` is inbound in the CNode ctor to have a validity check at the class boundary
- fixes a unit test and a fuzz utility that were passing invalid inbound onion values to the CNode ctor
- drops an unneeded check in `CNode::ConnectedThroughNetwork()` for its inbound status
- adds a public getter `IsInboundOnion()` that also allows unit testing it
- adds unit test coverage
ACKs for top commit:
sipa:
utACK 86c495223f
LarryRuane:
ACK 86c495223f
vasild:
ACK 86c495223f
MarcoFalke:
review ACK 86c495223f🐍
Tree-SHA512: 21109105bc4e5e03076fadd489204be00eac710c9de0127708ca2d0a10a048ff81f640f589a7429967ac3eb51d35fe24bb2b12e53e7aa3efbc47aaff6396d204
