Additionally, HTTP_HEADERS_FILTER_MODULE now added to HTTP_FILTER_MODULES.
This avoids explict use of modules at the later stages, now only module
lists are used. This will be needed in later patches.
Splits a request into subrequests, each providing a specific range of response.
The variable "$slice_range" must be used to set subrequest range and proper
cache key. The directive "slice" sets slice size.
The following example splits requests into 1-megabyte cacheable subrequests.
server {
listen 8000;
location / {
slice 1m;
proxy_cache cache;
proxy_cache_key $uri$is_args$args$slice_range;
proxy_set_header Range $slice_range;
proxy_cache_valid 200 206 1h;
proxy_pass http://127.0.0.1:9000;
}
}
The function is now called ngx_parse_http_time(), and can be used by
any code to parse HTTP-style date and time. In particular, it will be
used for OCSP stapling.
For compatibility, a macro to map ngx_http_parse_time() to the new name
provided for a while.
It's now initialized in auto/options like the rest of variables
for system paths.
As a side effect, the currently unused macro NGX_SBIN_PATH now
gets the correct value.
With this change it's no longer needed to pass -D_GNU_SOURCE manually,
and -D_FILE_OFFSET_BITS=64 is set to use 64-bit off_t.
Note that nginx currently fails to work properly with master process
enabled on GNU Hurd, as fcntl(F_SETOWN) returns EOPNOTSUPP for sockets
as of GNU Hurd 0.6. Additionally, our strerror() preloading doesn't
work well with GNU Hurd, as it uses large numbers for most errors.
When configured, an individual listen socket on a given address is
created for each worker process. This allows to reduce in-kernel lock
contention on configurations with high accept rates, resulting in better
performance. As of now it works on Linux and DragonFly BSD.
Note that on Linux incoming connection requests are currently tied up
to a specific listen socket, and if some sockets are closed, connection
requests will be reset, see https://lwn.net/Articles/542629/. With
nginx, this may happen if the number of worker processes is reduced.
There is no such problem on DragonFly BSD.
Based on previous work by Sepherosa Ziehau and Yingqi Lu.
The code tried to use suffixes for "long" and "long long" types, but
it never worked as intended due to the bug in the shell code. Also,
the max value for any 64-bit type other than "long long" on platforms
with 32-bit "long" would be incorrect if the bug was fixed.
So instead of fixing the bug in the shell code, always use the "int"
constant for 32-bit types, and "long long" constant for 64-bit types.
It appeared that the NGX_HAVE_AIO_SENDFILE macro was defined regardless of
the "--with-file-aio" configure option and the NGX_HAVE_FILE_AIO macro.
Now they are related.
Additionally, fixed one macro.
Previous workaround to avoid warnings on OS X due to deprecated system
OpenSSL library (introduced in a3870ea96ccd) no longer works, as
the MAC_OS_X_VERSION_MIN_REQUIRED macro is ignored on OS X 10.9
if a compiler used supports __attribute__(availability).
This fixes --with-file-aio support on systems that lack eventfd()
syscall, notably aarch64 Linux.
The syscall(SYS_eventfd) may still be necessary on systems that
have eventfd() syscall in the kernel but lack it in glibc, e.g.
as seen in the current CentOS 5 release.
Client address specified in the PROXY protocol header is now
saved in the $proxy_protocol_addr variable and can be used in
the realip module.
This is currently not implemented for mail.
Modern clang versions seem to no longer produce warnings for
system headers on Linux (at least clang 3.3 works), hence the
change. For older versions --with-cc-opt="-Wno-error" can be
used as a workaround.
Several warnings silenced, notably (ngx_socket_t) -1 is now checked
on socket operations instead of -1, as ngx_socket_t is unsigned on win32
and gcc complains on comparison.
With this patch, it's now possible to compile nginx using mingw gcc,
with options we normally compile on win32.
Several false positive warnings silenced, notably W8012 "Comparing
signed and unsigned" (due to u_short values promoted to int), and
W8072 "Suspicious pointer arithmetic" (due to large type values added
to pointers).
With this patch, it's now again possible to compile nginx using bcc32,
with options we normally compile on win32 minus ipv6 and ssl.
Precompiled headers are disabled as they lead to internal compiler errors
with long configure lines. Couple of false positive warnings silenced.
Various win32 typedefs are adjusted to work with Open Watcom C 1.9 headers.
With this patch, it's now again possible to compile nginx using owc386,
with options we normally compile on win32 minus ipv6 and ssl.
It was introduced in Linux 2.6.39, glibc 2.14 and allows to obtain
file descriptors without actually opening files. Thus made it possible
to traverse path with openat() syscalls without the need to have read
permissions for path components. It is effectively emulates O_SEARCH
which is missing on Linux.
O_PATH is used in combination with O_RDONLY. The last one is ignored
if O_PATH is used, but it allows nginx to not fail when it was built on
modern system (i.e. glibc 2.14+) and run with a kernel older than 2.6.39.
Then O_PATH is unknown to the kernel and ignored, while O_RDONLY is used.
Sadly, fstat() is not working with O_PATH descriptors till Linux 3.6.
As a workaround we fallback to fstatat() with the AT_EMPTY_PATH flag
that was introduced at the same time as O_PATH.
As of PCRE 8.33, config.h.generic no longer contains boolean macros. Two
of them (SUPPORT_PCRE8 and HAVE_MEMMOVE) were added to appropriate makefiles.
This allows PCRE 8.33 to compile and don't change anything for previous
versions.
This is done by passing AI_ADDRCONFIG to getaddrinfo().
On Linux, setting net.ipv6.conf.all.disable_ipv6 to 1 will now be
respected.
On FreeBSD, AI_ADDRCONFIG filtering is currently implemented by
attempting to create a datagram socket for the corresponding family,
which succeeds even if the system doesn't in fact have any addresses
of that family configured. That is, if the system with IPv6 support
in the kernel doesn't have IPv6 addresses configured, AI_ADDRCONFIG
will filter out IPv6 only inside a jail without IPv6 addresses or
with IPv6 disabled.
The $NGX_AUTO_CONFIG_H added to perl module Makefile dependencies to
make sure it's always rebuild after a configure. It is needed as we
expand various variables used for Makefile generation during configure
(in particular, nginx version).
Dependancy tracking introduced in r5169 were not handled absolute path
names properly. Absolute names might appear in CORE_DEPS if --with-openssl
or --with-pcre configure arguments are used to build OpenSSL/PCRE
libraries.
Additionally, revert part of r5169 to set NGX_INCS from Makefile
variables. Makefile variables have $ngx_include_opt in them, which
might result in wrong include paths being used. As a side effect,
this also restores build with --with-http_perl_module and --without-http
at the same time.
To avoid further breaks it's now done properly, all the dependencies
are now passed to Makefile.PL. While here, fixed include list passed to
Makefile.PL to use Makefile variables rather than a list expanded during
configure.
Filename extension used for dynamically loaded perl modules isn't
necessarily ".so" (e.g., it's ".bundle" on Mac OS X).
This fixes "make" after "make" unnecessarily rebuilding perl module.
Added missing dependencies for perl module's Makefile.
Simplified dependencies for perl module nginx.so: it depends
on Makefile that in turn depends on other perl bits.
Note: the "-p" argument of cp(1) dropped intentionally, to force nginx.so
rebuild. It is considered too boring to properly list all dependencies
in Makefile.PL.
This includes "debug_connection", upstreams, "proxy_pass", etc.
(ticket #92)
To preserve compatibility, "listen" specified with a domain name
selects the first IPv4 address, if available. If not available,
the first IPv6 address will be used (ticket #186).
On Mac OS X system toolchain by default prefers include files
from /usr/local/include, but libraries from /usr/lib. This might result in
various problems, in particular the one outlined below.
If the PCRE library is installed into /usr/local/, this results in pcre.h
being used from /usr/local/include (with PCRE_CONFIG_JIT defined), but
libpcre from /usr/lib (as shipped with the OS, without pcre_free_study()
symbol). As a result build fails as we use pcre_free_study() function
if we try to compile with PCRE JIT support.
Obvious workaround is to the root cause is to ask compiler to prefer
library from /usr/local/lib via ./configure --with-ld-opt="-L/usr/local/lib".
On the other hand, in any case it would be good to check if the function
we are going to use is available, hence the change.
See thread here for details:
http://mailman.nginx.org/pipermail/nginx-devel/2012-December/003074.html
Prodded by Piotr Sikora.
Very basic version without any OCSP responder query code, assuming valid
DER-encoded OCSP response is present in a ssl_stapling_file configured.
Such file might be produced with openssl like this:
openssl ocsp -issuer root.crt -cert domain.crt -respout domain.staple \
-url http://ocsp.example.com
